this is what i have when activesync is running i can look at my phone and dir
but anytime i run a program on my comp that has a .exe that is for my tilt
it keeps giving me this error cannot install program with activesync please reinstall program
can anybody help ? hope this makes since
AL
has anybody had this trouble before ?
AL
hello when i try to run a exe file on my winxp to install it on my tilt i get this msg
The file xxxxxxxx.exe is not a valid Windows CE Setup file
it also opens a activesync windows that asking me too delete files
can somebody tell me what is going on please i even installed sync again still does not work
AL
also a window says this
application manager cannot install this application on your moblie device due to an error in the setup file reinstall and try again
I hope somebody knows what is going on it does this on all exe files
with i try to do it on my win xp machine
if i copy it over to my phone it says this is not a valid pocket pc program
AL
leave the exe on your xp machine. plug your phone in, then run the app. it should go through a short install. then when the "remove" app screen pops up, just disregard it. Some times you need to goto your phone and continue an installation process, then you should be done.
where does it put it on my phone when it install it ? i cannot ever find it any where this has been driving me crazy
AL
AL
ok i dug out my laptop and it works with it fine
what on my winxp machine can i check to see what is going on ?
Al
Hi all,
Not sure why, but when I connect my diamond to the comp and try and connect w/ active sync, get a message on my phone saying I must install active sync 4.5 or newer on my desktop computer. However, I just did before connecting
If I cant get active sync to work, could somebody please explain how I can install net compact framework via direct file transfer? I intepreted the instructions on the microsoft website as to install the msi file while the phone was connected but nothing's happened and no cab files have appeared on my phone so obviously not doing it correctly.
Thanks in advance!
repalce the Cabl
Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.
Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.
I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.
Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.
Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.
help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse
All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!
All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John
Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee
Hello everyone!
So I just flashed my phone and put in the ViperONE ROM and my HTC sync manager won't work. Like my mac detects it and turns on the program but the program would freeze and I would not be able to do anything or click it. Secondly on the Sync Manager it shows my phone as "MTP device"?? What is that exactly?? Is that bad?? And lastly I tried to just transfer stuff via Android File Transfer, but that doesn't work either because the program says it can't detect my phone...
Please help.. Right now I can't transfer anything onto my phone