Upgraded to WM2005. By mistake formated Extended Eom to a small size ( less than required for WM2003SE). Getting ERROR 113 due toEXt Rom size limitation I think. Now can't downgrade to WM2003, nor stay with WM 2005. I still can get to Boat Loader. Please help. Thanks
did you found any solution? i have now the same problem....
HELP
GuidO
1) Do a downgrade to a 1.40 rom found on wiki in the WM5 page
2) Find the rom that you want
2) Delete the radio.nbf and the NK.nbf leaving only the MS.nbf in that dir.
3) run the downgrade as per wiki.
Now use the doc tool and corect the settings (info found in wiki in how to upgrade to WM5.
The doc tool only works if the CE Rom is not wm5.
the downgrade doesn't work
Hi I tried to use the downgrade file, but it doesn't work
where can i find a downgrade to a 1.40 rom found on wiki in the WM5 page. I f i look there i find only .exe.
If it is possible can you send me the good dir or the good url..
Thanx
GuidO
belsj said:
If it is possible can you send me the good dir or the good url..
Thanx
GuidO
Click to expand...
Click to collapse
This is the path you want..
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Sorry MrPhilly,
but this site i already had seen, but all the dutch roms are .exe, and i have to delete some files says MDAIIIUser
1) Do a downgrade to a 1.40 rom found on wiki in the WM5 page
2) Find the rom that you want
2) Delete the radio.nbf and the NK.nbf leaving only the MS.nbf in that dir.
3) run the downgrade as per wiki. ???
My screen is still in boot blue green red and white with
R 1.13.00
G 1337.42
D 5.03.02 WWE
GuidO
belsj said:
Sorry MrPhilly,
but this site i already had seen, but all the dutch roms are .exe, and i have to delete some files says MDAIIIUser
Click to expand...
Click to collapse
Right - Have you followed this..?
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
This will, with the 1.40 ROM that MDAIIIUser suggests will hopefully sort it out!
So i have the downgrade files
But when i have to press Power + Softreset, and when the colored stripes shows on the screen, i press the two buttons Record+Camera. Then i see the three options.
I changed them, second and the third to "yes" and then pressed on the mailbutton.
My screen becomes white and thats it.
It doesn't boot on.
What did i do wrong and is my ppc def. dead?
GuidO
you need to wait, have a beer, it has taken 4 mins on mine, thought i turned it into a brick.
Related
Sorry if this is posted before.
I've a problem with my extROM in my xda2s. Before it, ive followed all instruction to unlock my extROM, then partition it then i've made an upgrade with my xda2s with WM2k5_1.60c.00WWE_XDA2_HIMALAYA, first i've got checksum error, so ive made an editing with editfix, after that the himaupgrade checked that the rom, the extrom with strange version (its not like, eg. 1.40, it shows somekind of block & the other ascii character) except the radio. So I kept continue it doubtly & it 100 complete. After that ive got my device just showed with bootloder mode, even ive reset it. i guess that ive done a destructive way ( right ?) so i flashed it again with WM5_pack_V3.rar but with no extROM, & my device alive again so i tried to unlock my extROM with ExtROMUnlocker(for_WM2005_Only).cab, unhide was succeed, unlock was unsucceed, so what am i gonna do now ??? , please help me ... or i'll go to hell with the wrath of my parents .... hiks
desingo said:
Sorry if this is posted before.
I've a problem with my extROM in my xda2s. Before it, ive followed all instruction to unlock my extROM, then partition it then i've made an upgrade with my xda2s with WM2k5_1.60c.00WWE_XDA2_HIMALAYA, first i've got checksum error, so ive made an editing with editfix, after that the himaupgrade checked that the rom, the extrom with strange version (its not like, eg. 1.40, it shows somekind of block & the other ascii character) except the radio. So I kept continue it doubtly & it 100 complete. After that ive got my device just showed with bootloder mode, even ive reset it. i guess that ive done a destructive way ( right ?) so i flashed it again with WM5_pack_V3.rar but with no extROM, & my device alive again so i tried to unlock my extROM with ExtROMUnlocker(for_WM2005_Only).cab, unhide was succeed, unlock was unsucceed, so what am i gonna do now ??? , please help me ... or i'll go to hell with the wrath of my parents .... hiks
Click to expand...
Click to collapse
Wah .. sama nich masalah nya.....
btw same problem with me... im loosing extended ROM after upgrade to WM 2005
i have no ext rom either, but is it a BA you upgraded or a HIMALAYA??
MIssing ExtROM
joey jojo said:
i have no ext rom either, but is it a BA you upgraded or a HIMALAYA??
Click to expand...
Click to collapse
Ive upgraded BA device
Posting my experience for desingo
Well, i went so mad that i created http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Extended_ROM
that wm5 has no extended rom, i downgraded to wm3 first.
created with the doc resize tool a 'partition" of 4mb's.
than i upgraded back to wm5.
installed the patch, rebooted
now my extrom is visible (see picture on the wikipage) and big enough to put files in, i consider it for now as the /storage of wm2003.
The data survives a registry and storage reset under wm5, but it wont start up,(yet).
The BlueAngel seems to miss a extended rom driver and some registry settings.
If anybody knows what files are used to be in the extended rom driver, please tell me, i
want to try with the wm3se files to recreate that "driver".
Or will the registry cab "EXTROM" thats on the wiki will do if they where integrated in the patched rom version?
After i installed this patch, after a reboot my autorun starts to "install"
So this is where i stranded with this problem, since i got wm5 on.
Curently running on my BlueAngel:
Wm2003SE 4.21.1088 Build 15159..2.6.4
Rom version 1.42.00 WWE
Rom Date 09/05/05
Protocol 1337.42
Radio 1.13
Bluetooth build 3900
Extrom: 1.42.115 WWE
ExtROM missing
pimbo said:
that wm5 has no extended rom, i downgraded to wm3 first.
created with the doc resize tool a 'partition" of 4mb's.
than i upgraded back to wm5.
installed the patch, rebooted
now my extrom is visible (see picture on the wikipage) and big enough to put files in, i consider it for now as the /storage of wm2003.
The data survives a registry and storage reset under wm5, but it wont start up,(yet).
Click to expand...
Click to collapse
According to my problem, is it possible if i downgrade to get extrom visible again after it dissappear ?
Re: ExtROM missing
desingo said:
According to my problem, is it possible if i downgrade to get extrom visible again after it dissappear ?
Click to expand...
Click to collapse
under wm2003
if you resized your rom to go to wm5 you need to resize it back to ?? i gues around 12 or 16mb? for himalaya do not know the value, must be done under wm2003
Than reinstall the wanted extended rom in .nbf with the no id loader.
note: make sure other 2 are nbf are not in, unless you want to do a full upgrade again.
You can always see ur extrom again, but it must be bigger then 128k
and use the extrom cab or a extrom unlocker tool.
Re: ExtROM missing
pimbo said:
desingo said:
According to my problem, is it possible if i downgrade to get extrom visible again after it dissappear ?
Click to expand...
Click to collapse
under wm2003
if you resized your rom to go to wm5 you need to resize it back to ?? i gues around 12 or 16mb? for himalaya do not know the value, must be done under wm2003
Than reinstall the wanted extended rom in .nbf with the no id loader.
note: make sure other 2 are nbf are not in, unless you want to do a full upgrade again.
Click to expand...
Click to collapse
sorry, im a little bit complicated do you mean if i want to downgrade to wm2003se i dont need to unlock my missing extrom in wm2005 ? n the nbf i should install is only the extrom ??? what the difference if do a partial downgrade and a full one ???
Re: ExtROM missing
desingo said:
sorry, im a little bit complicated do you mean if i want to downgrade to wm2003se i dont need to unlock my missing extrom in wm2005 ?
Click to expand...
Click to collapse
i think i dont understand the problem proberly. :lol:
Once you upgraded to wm5 with 60mb storage, you wiped out the extrom password, so your extrom is already unlocked.
so if you go back to wm3 your extrom is stil unlocked.
n the nbf i should install is only the extrom ??? what the difference if do a partial downgrade and a full one ???
Click to expand...
Click to collapse
Only if you want to stay om wm3
The time, id could save you 15minutes, but you must be running wm3 and resized your extrom back to the original size, before you can reinstall your extended rom
Re: ExtROM missing
pimbo said:
Once you upgraded to wm5 with 60mb storage, you wiped out the extrom password, so your extrom is already unlocked.
so if you go back to wm3 your extrom is stil unlocked.
Sorry again , if the extrom is unlocked in my wm2005, y file manager can't show it up ? :?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Re: ExtROM missing
desingo said:
Sorry again , if the extrom is unlocked in my wm2005, y file manager can't show it up ? :?
Click to expand...
Click to collapse
U need to unhide it. use the cab from mamaich on the wiki page that i created
yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.
SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?
Hi.
I'm having some serious problems running WM5 on my SPV M2000 (Blue Angel). Internet Explorer keeps crashing, doesn't browse...bluetooth isn't recieving files from my PC, camera closes on its own, MSN Mobile not working at ALL...etc.
I want to remove this AKU3.5 ROM and return back to my previous WM2003SE ROM from Orange or even Imate. I downloaded the Orange V2.5 ROM update but failed to initialize the update process since the Country ID was incorrect for some odd reason.
Guys can you please help me out of it. Just tell me the safest and easiest way to downgrade back to the original ROM. And is possible that when i downgrade, i can install the Imate PDA2k ROM on my Orange SPV M2000?
I'd really really appreciate your help. Looking forward to your replies!
My device information details are:
ROM version : 5.04.09.WWE
ROM date : 11/02/06
Radio Version : 1.13.00
Protocol Version : 1337.42
ExtROM version : *empty* (blank)
i would make use of wm5 maupgrade_noID utility to flash the .nbf file of wm3 back to the original rom.
imatrix said:
i would make use of wm5 maupgrade_noID utility to flash the .nbf file of wm3 back to the original rom.
Click to expand...
Click to collapse
Yeah hi. Thanks for the reply, could you please give me a step by step procedure how am i suppose to do it? Where do i get the files from and how do i go about it.
I'd be grateful man!
As i see you use helmi aku 3.5 rom.
when u extracted the file out of the zip file u initially downloaded, u should see a folder name PH20B1. It includes maupgrade_noid utility there.
so basically what u do is extract the original rom (nk.nbf) into that PH20B1 folder, then put your device to bootloader mode, flash it as normal.
imatrix said:
As i see you use helmi aku 3.5 rom.
when u extracted the file out of the zip file u initially downloaded, u should see a folder name PH20B1. It includes maupgrade_noid utility there.
so basically what u do is extract the original rom (nk.nbf) into that PH20B1 folder, then put your device to bootloader mode, flash it as normal.
Click to expand...
Click to collapse
Actually i didn't install Helmi AKU3.5 ROM. I bought my phone used, and had this rom already installed. Now i want to get back to my original factory ROM. And i can't seem to get how to do it
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
link above lists all the original rom for each device / operator.
please see the attachment, it's the utility to upgrade.
for further information please read wiki though.
Thank you imatrix. Will go through the link you provided. Thanks for all your help!
By the way...is it possible for me to flash an Imate ROM on an Orange SPV M2000? I find Imate ROMs more stable than Orange.
ooo?/
I think, you will have a serious problem wwhen you go back to wm2003 mate.. you're bluetooth will be useless, I don't know why and how,,.. I tried wm2003 downgrade last time, and I was worried because when I try to turn my bt on, it keeps may saying that the bluetooth software is expired..bla..bla..and I can't turn my bluetooth on.. though I haven't tried installing abt stack, but I guess same thing will happen.. but its for you to find out.. theres a very comprehensive details on downgrading/upgrading roms on blueangel wiki.. to get rid of that country I'd error, just use maupgradeutnoid.exe which you can also download from there
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??