SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?
Related
hi all, i have been looking and asking questions all mornin on how to upgrade to wm5, so i downloaded needed files, hard reset my xdaIIs and run rom, with the baupgrade rom i get error 103 and with the maupgrade it runs for 20 secounds or so, says its comlete and to do another hard reset, and when i have done this nothin is different, please tell me where i am going wrong,
My device info is
rom version 1.40.00 WWE
protocol version 1337.42
Extrom 1.40.237 WWE
I take it my xda is still standard?
Thanks
Alan
wiki
pls read wiki
you need to formate the device
camera+recoder button thing
i did exactly that and had usb come up on screen but still no joy.
Cheers
hey
regarding the the maupgradeutnoid.exe, when your using it for the vry first time, you have to disable activesync first, put your device into bottloader mode, and put it ine the cradle... you could here a sound, wait till the device would be recognize and wait till a popup message telling you that the new device installed is ready to use and that's the time where you run the maupgradeutnoid.exe otherwise you'll keep on just getting that message that the upgarde is finished, well actually nothing has happened.
since, its your first time attempt of upgrading to wm5, you can use baupgrade.exe but be sure you have set the corect operator for your device. to know what is your operator info, just transfer the getdeviceinfo.exe to your device and run it, this .exe will generate devicedata.txt found in the windows directory of your device. tranfer it to your pc and read it from there, in my case I have an imate, my operator is CDL_01, remember this coz you will neede this when your upgrading to wm5.
in any rom that you can download in this site, there is an included bat file, setoperator.bat, and enter you operator info, after that your ready to run baupgradeut.exe with no problem... read the wiki for better understanding.. alwaysssssssssss read..............
Hello people, I have a question for you. I recently did the Upgrade of my Qtek 9090 to WM 5 (device data now is PH20B WWE 5.03.02 1.12.00). It seems to be working fine (have yet to test wireless connection), but I discovered that I can't get the camera on the phone to work. For some reason, it simply does not react to camera button. It also does not react even when I try with the manual startup of pictures & videos application. Does anyone has any idea how to get out from this one? If this is any help, the original phone data were PH20B 0 B WWE E DANGA102 1.40.00 0 0 1.40.147 1.12.00 12.00.
Thanks a lot
Simple but crucial question: Which WM5 rom you flashed? Have you read specific information about this rom? maybe this one requires some post-instalation operations?
Basically, I found this ROM on www.buzzdev.net, and it only stated BA WM2005 5.03.02WWE - standard upgrade. It is basically the only one which worked for me, since every other dumped me (the model of the phone matched the ROM). However, there were no additional explanations for this, so I am stuck. Is there any registry tweak, or aditional piece of software which could make it work, or I will have to go looking further for better ROM?
As long as we don't know what is the problem with the ROM, we cannot help you - some ROMs just had camera support cut out, others needed installing additional software, some had errors.
About model/device check: please take any recent WM5 rom (baniaczek's for starters) and just read carefully flash instructions from Wiki - there is no problem with device check, if you understand what you do and how you should do it.
Thanks Jakub for good advice, I've been doing some reading and I tried baniaczek's latest issue from the web. However, I've got stuck. Namely, MaUpgradeUt_noID.exe does not work in my case. It simply tells that there has been communication error with the device, or if it starts it tells that this ROM upgrade utility was not designed for this device. I tried the other way with BaUpgrade.exe, with usage of EditFix.bat and xda3nbftool.exe, but it seems that I'm doing something wrong - each time I get the message that the specific ROM was not written for me and that I should check my vendor. Is there any way to get out of this, since now it seems that I can't do no upgrade or downgrade at all?
Thanks a lot in advance, I know this is mostly due to my mistakes and usage of unchecked ROMs.
Thank to everyone who was trying to help me. I did some experimenting in order to solve the upgrade issue, and I solved the problem. This is how I did it: Namely, I downloaded KitchenAKU3.5v2-xplode, which also contains useful readme. Basically if you want to have MaUpgradeUt_noID.exe to work for you at all, you have to put the device in Bootloader mode (press power + record simultaneously). After that, the upgrade went smoothly, after I designed my own rom, which was very easy with xplode's tutorial.
One more thing I did was that after the upgrade, I did a soft reset and "cleanup" of the device. after the soft reset I changed following options on the boot screen using camera and record buttons:
“Enable KITL” set to NO
“Clean Registry Hive” set to YES
“Format Storage” set to YES. (again on xplode's instructions)
After that, I confirmed settings with pressing of the mail button. One minute later, I had fully operational and very fast QTEK 9090 running WM5.
I hope that some things I did will be useful to other people trying to fix their blue angels. And of course, thanks to Xplode for making an excellent user-friendly upgrade.
I'm Stuck in BA WM6 Upgrading.
I was at the HTC_Blueangel_WM6_Wizzard Upgrade 4
After execute the installer file I performed a Hard Reset
Colored stripes (the bootscreen) will appear on the screen but I can't ge no debugger screen at all: the BA remain in Bootscreen with R 1.11.0 at the right bottom of the screen.The battery was full. I've tried the mtty procedure as well...no way out. Any clue ????
Have you follow all this steps here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1
Yes I did and now I'm Stuck at
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
And what device do you have in fact? Qtek 9090? Other??
Mine is a Qtek 9090 and didn't have any trouble...
Same problem here, wm6 was already running; downgraded to 2003 SE to repartition the extrom, wanted to flash to wm6 again; now my xda3 is stucked after flashing, only r 1.10.0 is shown, no chance to carry on...???
I've got imate pda2k ct2cwj...and Heinzibua I'm stuck on R 1.11.00 do you have an Imate as well ??? cause I guess the official XDA procedure doesn't work for this kind of model (mine was an Italian W2003).
I'm very upset about this...
@ conosciani.m
wm6 worked well on my xda3 , problem was only after repartitioning the extrom.
I'm going to think I did somenthing wrong during the extrom steps..so i've returned back to wm2003 and I'm going to try the upgrade again
please tell me, if you find the solution...
running again
i repartitioned storage in 2003SE set to 20000 kb.
flashed to WM6, no problem now, storage is 41,25 MB, but running !!!
I did it too, I had to reinstalled w2003 and dit the Upgrading BA WM6 wizard again.....
after UNHIDE the rom, this time (and not in the previous upgrading), I did it the rom format using MTTY after that I ran the upgrade procedure and I got the WM6 running.
Happy for both of us to reach the goal......
do you have 60 MB storage now ?
can you give me more infos about MTTY ?
thx
tried to set storage to 60mb again, stuck again, also if i do just the same procedure as yesterday it is stuck; start to hate this device.
please tell me, what you did exactly to make it run. tried mtty also, but don´t know, what to do...
try this...
1. downgrade to 2003
2. copy the utils to the phone(extrom utils and repart_doc.exe)
3. install extrom utils...
---a. tap unhide... ok.
---b. tap unlock... ok. may throw an error but still ok...
---c. reset...
4. run Repart_DOC
---a. Set it to 128 byte
---b. Go/Start/Format (it should succeed)
5. reset to bootloader
---(press and hold record + power button then stick reset)
6. flash WM6 ROM
7. cold boot (press and hold power button then stick reset)
8. (optional) if stuck in the "tri-color"(white isnt a color ) screen...
---Hard Reset. Using No/Yes/Yes option.
reading further about the Repart_Doc topics...
128byte is the smallest you can format/resize the extrom
to maximize the storage in WM6.
Thx, that´s exactly what i did many times without success...
but now it works, after upgrading radio rom there also was no problem with upgrading to WM6; 60 MB rom; i only want to upgrade to radio rom 1.15, then i´m happy.
thx everybody for your help
hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..
first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it
ok, i did exactly what you wrote and now everything work! thank for you help!
why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se
first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se
SIM TOOL KIT is the only reason one would want to downgrade
Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.
Hi,
I am new to attempting ROM upgrades!
I bought my BA on ebay it runs on wm2003se but have never used it as a phone because it needed unlocking so i thought i would try to upgrade then unlock.
After many failed rom upgrade attempts one finally started to install, it got to 100% then i was promped to soft reset my XDAiis which i presume is the normal proceedure?
So i did this, but now it is stuck on the blue, green, red and white screen displaying,
No GSM
HTC BlueAngel D 6. 50.28.WWE
I have tried hard reset
I have tried to install the O2 rom that came with it but it says its the incorrect country version!
Any ideas or is it Dead???
HELP
first: try hard resetting!
the procedure changed in comparison to wm2003se, so you have to press reset+power, and then immediately press camera+record. a menu shows up, showing
Enable KITL YES
clear reg. hive NO
format storage NO
using the camera and record buttons, change these entries to
Enable KITL NO
clear reg. hive YES
format storage YES
and press the mail button to confirm, after some time you will see the device boot for the first time.
probably that solves your first problem, but since you seem pretty unexperienced (no offense), it probably unveils more problems. you should also make sure to read this carefully, maybe follow the upgrade wizard again, to make sure you formatted your old extrom and resized it, have a working radio rom, and to make sure you know what you are doing and how to go on improving you BA experience:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
greetz
Chef_Tony
Hi,
Thanks for your reply i have tried hard reseting and still have the same problem, any other suggestions???
run through the wizard in the link above, you will need to downgrade to wm2003se again, resize the storage space, upgrade to wm6.5 doing everything exactly as written in the wiki and you will have no problems, here there is the step you are currently facing:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
the downgrade from wm5 or above down to wm2003
hello !
my screen stay white after the
"Enable KITL NO
clear reg. hive YES
format storage YES"
part. How can I do ? thanks
and it's a xv6600
i am not an expert when it comes to the different names of the device, but a quick google search told me, your device is not a blueangel, but a cdma device, namely a HARRIER. the harrier does not support wm5 and up, so you should flash your original shipped rom back, to get it back to work.
if you do not have your shipped rom present (on cd) you can go to your carrier's website and try and download it there. if, however, it is not listed there anymore, you can go download it here:
http://harrier.atspace.com/
all credit for the shipped rom archive goes to xplode.
greetz
Chef_Tony
great link thanks