Hello people, I have a question for you. I recently did the Upgrade of my Qtek 9090 to WM 5 (device data now is PH20B WWE 5.03.02 1.12.00). It seems to be working fine (have yet to test wireless connection), but I discovered that I can't get the camera on the phone to work. For some reason, it simply does not react to camera button. It also does not react even when I try with the manual startup of pictures & videos application. Does anyone has any idea how to get out from this one? If this is any help, the original phone data were PH20B 0 B WWE E DANGA102 1.40.00 0 0 1.40.147 1.12.00 12.00.
Thanks a lot
Simple but crucial question: Which WM5 rom you flashed? Have you read specific information about this rom? maybe this one requires some post-instalation operations?
Basically, I found this ROM on www.buzzdev.net, and it only stated BA WM2005 5.03.02WWE - standard upgrade. It is basically the only one which worked for me, since every other dumped me (the model of the phone matched the ROM). However, there were no additional explanations for this, so I am stuck. Is there any registry tweak, or aditional piece of software which could make it work, or I will have to go looking further for better ROM?
As long as we don't know what is the problem with the ROM, we cannot help you - some ROMs just had camera support cut out, others needed installing additional software, some had errors.
About model/device check: please take any recent WM5 rom (baniaczek's for starters) and just read carefully flash instructions from Wiki - there is no problem with device check, if you understand what you do and how you should do it.
Thanks Jakub for good advice, I've been doing some reading and I tried baniaczek's latest issue from the web. However, I've got stuck. Namely, MaUpgradeUt_noID.exe does not work in my case. It simply tells that there has been communication error with the device, or if it starts it tells that this ROM upgrade utility was not designed for this device. I tried the other way with BaUpgrade.exe, with usage of EditFix.bat and xda3nbftool.exe, but it seems that I'm doing something wrong - each time I get the message that the specific ROM was not written for me and that I should check my vendor. Is there any way to get out of this, since now it seems that I can't do no upgrade or downgrade at all?
Thanks a lot in advance, I know this is mostly due to my mistakes and usage of unchecked ROMs.
Thank to everyone who was trying to help me. I did some experimenting in order to solve the upgrade issue, and I solved the problem. This is how I did it: Namely, I downloaded KitchenAKU3.5v2-xplode, which also contains useful readme. Basically if you want to have MaUpgradeUt_noID.exe to work for you at all, you have to put the device in Bootloader mode (press power + record simultaneously). After that, the upgrade went smoothly, after I designed my own rom, which was very easy with xplode's tutorial.
One more thing I did was that after the upgrade, I did a soft reset and "cleanup" of the device. after the soft reset I changed following options on the boot screen using camera and record buttons:
“Enable KITL” set to NO
“Clean Registry Hive” set to YES
“Format Storage” set to YES. (again on xplode's instructions)
After that, I confirmed settings with pressing of the mail button. One minute later, I had fully operational and very fast QTEK 9090 running WM5.
I hope that some things I did will be useful to other people trying to fix their blue angels. And of course, thanks to Xplode for making an excellent user-friendly upgrade.
Related
Hi,
Just wanted to get BT working well on my PDA2k.
Did the Radio upgrade as told in wiki to 1.10 - as I saw a few comments saying 1.12 was unstable.
WEnt through fine, except now I cannot get a phone signal at all and the phone call buttons don't work.
What is the best thing to do? Should I just do the whole upgrade to 1.40. I read that the phone was locking up on this and was not confident to do the fix.
Appreciate your help.
(Going back to 1.22 for now as I have now wasted 4 hours precious work tome just trying to get the device to work as it originally should!)
Russel
W know have 3 threads on the 1.40.
All seem to post errors with that rom in some minor way.
Myself I went for the 1.40 converted to type I and have not added the ext rom (yet). also have 1.12, in all I am happy with it as I have not come across any of those issues (as i dont use the camera, ect). So far Imate makes the best rom IMHO.
MDAIIIUser said:
W know have 3 threads on the 1.40.
All seem to post errors with that rom in some minor way.
Myself I went for the 1.40 converted to type I and have not added the ext rom (yet). also have 1.12, in all I am happy with it as I have not come across any of those issues (as i dont use the camera, ect). So far Imate makes the best rom IMHO.
Click to expand...
Click to collapse
MDAIIIUser, which 1.40 rom are you using? The one from the original thread "New Rom 1.40 on FTP" or the one you converted from this thread "BA_WWE_14000_147_11200_Ship" ? There should not be any differences between roms i think, but i find there are some subtle variances. Is it possible that conversion can corrupt the final rom produced? Your converted rom seems to work better for me but still need a soft reset now and then
converted to type I qtek 147.
It could be possible that conversion is corupt but dont think so, check wiki avlible roms and see the passed with new tool. all of these roms have been confirmed to work.
Sure I have issues with this rom but they are carry over from 1.02, 1.22, 1.31 and now 1.40. Most based on alarm issues as well as remove from power were i get locked due to i-pass (i think)
I will do a hex file compare on the 1.40 ce from qtec and see if i see anything.
Type I and Type II
Thanks for the reply - appreciate it.
Which download was it that you used - the one from wiki?
Also what is the difference between type I and type II?
Cheers
Russel
Type I and Type II
Thanks for the reply - appreciate it.
Which download was it that you used - the one from wiki?
I tried to download 1.40 - but got a country error - any suggestions?
Also what is the difference between type I and type II?
Cheers
Russel
Type I and Type II cont'd
Thanks for the reply - sorry a bit slow here.
I get there is a difference between types according to the origin - however how is it relevant? If I am coming from 1.22.162 (Type I) ext ROM should I make sure I only install a ROM upgrade that is type I? :?
Cheers
Russel
Clear text.
Type I roms work with tool xda3nbtool.exe
Tpye II roms give you a header error when used with tool.
Thus you can only upgrade type I roms unless you know the country code fix that seems to work.
Wiki is my prefered choice for downloading roms, in the case of the 1.40 I used the thread to download the converted 1.40 to type I rom which was not hard for me as I posted it. (its the qtek 1.40.147)
Thanks
Thanks MDAIIIuser. It is clear now.
Regards
Russel
MDAIIIUser, i saw your reply in another thread after comparing the 1.40 roms. How about the first 1.40 rom posted in this file BA_1.40_radio_1.20_untested_extrom.rar on the ftp? This should be the same as all the others right? I seem to have had fewer problems with this rom than the converted to type I qtek 147. My main problem seems to be turning the phone on after being in flight mode, losing network signal and GPRS sometimes not connecting. All need a soft reset to resolve. The from BA_1.40_radio_1.20_untested_extrom.rar gave me problems when trying to turn on wifi. Im using radio 1.12.
efjay
It takes me just over an hour to download roms of this site which I know is my problem.
I dont like working with baked roms as I can't post them to wiki as they are not complete,
I can't cook the Ext Rom as it to is not original,
I can't post the ext rom in wiki
and thus the hour download is a waste of my time.
I seem to spend enough time updating wiki and finding new roms on the web so sorry the answer is no I wont check that rom untill I see a original ship.exe.
You could though
MDAIIIUser, sure i would be happy to. Im not too sure what tool i should use to do a comparison. Im reading wiki, if its there ill find it. thanks
My choice would be ultracompare
http://www.ultraedit.com/
you will notice that the header is different this is due to the file timestamp and date.
Windows media player v10
MDAIIIuser or anyone else.
I upgraded my CE ROM to 1.40, however I cannot get windows media player to pick up any of my music files as valid .wma files. It also seems to be endlessly looking for a skin.
Any suggestions?
Cheers
Russel
read something about that in one of the 3 threads on the 1.40 (well I think I did)
How to fix
DId a search for WMP problems - couldn't find anything useful at a quick glance. Any ideas how to resolve it?
Cheers
Russel
MDAIIIUser, i downloaded ultracompare and can see there are differences with all the 1.40 roms but the output doesnt make sense to me. I guess ill try all the roms and if there is a difference it should show up. thanks for your help
SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?
Hi guys!
I have a couple of questions.
Last week I performed WM2003SE to WM2005 upgrade on my BA. It comes from German T-Mob. I bought it second hand, so I guess that the ROM I found on it was loaded some way along the road (it was WWE, and my device has a German QWERTZ keyboard layout, meaning it originally had to come with some non-WWE ROM..right?)
When I bought it, it had O2 ìsoftwareî (thatís called extended ROM, right?) v1.31, Radio v1.06 and Protocol 1337.45.
I had some problems installing newest WM2003SE as I was getting error about wrong CID when running .exe update file, so I went for Helmiís 2005 pack. Later I realized I should just rename .exe to .zip and extract needed files from WM2003 .exe updates. I used BaUpgradeUt (of course failed due to the wrong CID) and MaUpgradeUt_noID.
Firstly I upgraded to Helmiís WM2005 (v5.04.09 WWE), but after finished upgrade I started getting some errors for some missing or corrupt executable files after device starts up (see the screenshots), which disappeared when I reinstalled 2005 (reinstalling it for the second time I got those 3 check boxes on a boot loader screen, which I didnít see when doing the installation for the first time..that could be the source of my problems after the first installation). Someway along those actions I also cleared my storage (with a tool provided in Helmiís ROM, that has a red recycle icon). After deleting storage items, I found many apps found on original Helmiís ROM missing (good..I didnít need those
Then I decided to update my radio from 1.05 to 1.16 and it went ok, after I managed to connect the device in boot loader mode to USB cradle.
- Now, I find it rather strange to have that color-striped boot loader screen still appearing when I boot my device. Shouldnít it be replaced with some WM default or ROM assigned bitmap?
- I used GetDeviceData to determine the exact data of my BA and prior to upgrade it gave me something like this:
PH20B WWE some_letter T-MOB102 followed by ROM and Radio version.
After the ROM update (2003SE to 2005) I got this as a result:
PH20B WWE A T%CID? 5.04.09. 1.06.00 % 4
Then I upgraded Radio...
PH20B WWE A T%CID? 5.04.09. 1.15.00 % 4
As you can see, T-MOB102 part disappeared and itís replaced with an unknown CID part. I guess thatís why I still see the boot loader colorful stripes when booting/soft resetting my device. Is it a big problem, as the device works fine? Is it a normal occurrence after using MaUpgradeUt_noID?
- That ìProtocolî version/number (1337.45 in my case)..can that be updated and what is it?
- After the upgrade I noticed that my phone is not recognized as a PPC any more, but as a computer instead. The problem is that now it offers less services over bluetooth (only Active Sync on Mac and Network Access Point on Windows). On Windows computer, I cannot send any files through btooth OBEX and itís very annoying. Is that a problem with bluetooth and WM2005 on these devices one could read about on forums? Any way to fix it? I must say that I havenít installed the newest bluetooth stack (how can I check what stack version do I have now?).
I hope you're still awake after reading this
Answer is simple http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
And you will receive the same answer whenever you ask beginner question
I appreciate your advice, however, you must know that although some of my questions were beginner questions not all of them were such and those still require direct answers rather than some generic answer you provided.
I read the 80% of the BA Wiki before posting here and I haven't found the answers I need.
For instance, I still don't know why those bootloader stripes are still present..or what happened to my CID part in device data. If it's messed up, how come it's working? If it's ok, why it's not mentioned on the Wiki?
You may correct me if I'm wrong, but after reading all of that, I still don't know wha't really included in the backup or why my SMS messages are still there after I performed a hard reset, but my e-mail settings are deleted...
Saying "Eat if you're hungry will not solve the problem of a hungry one".
In general, that approach of forwarding noobs or people with such questions to a first page of an ecyclopediae is not a solution.
You're right wiki isn't enough, there is a search! And let me told you a little secret - there is a google, (you know google dont you?)
After reading wiki you MUST realize that:
Bootloader - no way of removing stripes!
CID part - You didn't follow the step-by-step proccess in wiki. And because you are beginner you should follow the Helmi install procedure (or read through WM5-BA page) And what is more important you dont even know anything about CID (use google - it is in wiki but not in BA section)
+
Because its not important its not mentioned in BA wiki.
Read something about WM5 how it works and the differences between 2003SE. (Like a persistent storage) <- answer to your SMS and hardreset question. And use google to find more information rather than asking more question
Hi,
I am new to attempting ROM upgrades!
I bought my BA on ebay it runs on wm2003se but have never used it as a phone because it needed unlocking so i thought i would try to upgrade then unlock.
After many failed rom upgrade attempts one finally started to install, it got to 100% then i was promped to soft reset my XDAiis which i presume is the normal proceedure?
So i did this, but now it is stuck on the blue, green, red and white screen displaying,
No GSM
HTC BlueAngel D 6. 50.28.WWE
I have tried hard reset
I have tried to install the O2 rom that came with it but it says its the incorrect country version!
Any ideas or is it Dead???
HELP
first: try hard resetting!
the procedure changed in comparison to wm2003se, so you have to press reset+power, and then immediately press camera+record. a menu shows up, showing
Enable KITL YES
clear reg. hive NO
format storage NO
using the camera and record buttons, change these entries to
Enable KITL NO
clear reg. hive YES
format storage YES
and press the mail button to confirm, after some time you will see the device boot for the first time.
probably that solves your first problem, but since you seem pretty unexperienced (no offense), it probably unveils more problems. you should also make sure to read this carefully, maybe follow the upgrade wizard again, to make sure you formatted your old extrom and resized it, have a working radio rom, and to make sure you know what you are doing and how to go on improving you BA experience:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
greetz
Chef_Tony
Hi,
Thanks for your reply i have tried hard reseting and still have the same problem, any other suggestions???
run through the wizard in the link above, you will need to downgrade to wm2003se again, resize the storage space, upgrade to wm6.5 doing everything exactly as written in the wiki and you will have no problems, here there is the step you are currently facing:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
the downgrade from wm5 or above down to wm2003
hello !
my screen stay white after the
"Enable KITL NO
clear reg. hive YES
format storage YES"
part. How can I do ? thanks
and it's a xv6600
i am not an expert when it comes to the different names of the device, but a quick google search told me, your device is not a blueangel, but a cdma device, namely a HARRIER. the harrier does not support wm5 and up, so you should flash your original shipped rom back, to get it back to work.
if you do not have your shipped rom present (on cd) you can go to your carrier's website and try and download it there. if, however, it is not listed there anymore, you can go download it here:
http://harrier.atspace.com/
all credit for the shipped rom archive goes to xplode.
greetz
Chef_Tony
great link thanks
I have tried hitting record + power + reset and still no dice.
I did this last Jan to my BA with few problems, put in the wm6.1
Wanting to install this one WM6.5
I also installed the Wizard Service Tool and it doesnt seem to work. It will give me info but the hard reset and other rom features don't want to work.
is there a workaround for gettin to the bootloader? Or should I take this all as a sign not to brik my phone? ;D
thanks,
chela
hi , i'm new on the forum...i think i've the same problem, on my PDA2K..
I try to install a new rom from wm2003se, using a file called "preparazione BA"( i think i've unlocked the extrom), then i normally setup with the MaUpgradeUt_noID.exe..But now, when the upgrading is completed to wm6, i'm not able to load the bootoption..i can see 4 colour bands (green blue red white) but no option to boot. The rec+photo+reset seem not to work.
Could anyone help me\us??
Regards at all
Davide
after 2 hours..here are some news: my pda2k display became with the 4 color but there was writen something about R none, G none and (version onf the rom i tryed to install) then pressing rec+cam i saw for little fraction of second the menu enable kitl ,clean registry, etc.. and then suddenly the wm6 starts. After installing the OS ask me to reset..Well, it return to the same 4 color, and the only word i see is R1.11.00
I'm getting crazy...
Please big chef tony help me!
i don't know what to do now...i'm little down
Davide
...lol maybe because I dont do this often enough, but this case was solved with a little bit of RTFM!
I didnt realize I was pressing the wrong fsking button! derr!
Here is Chef Tony's post...should carve it into my desk!
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
i've solved my problem..reading on other forums, they suggest to install a rom WM5, where there was radio upgrade too..After i was able to install WM6.1 ! Now..i have to wait..and crossing my fingers!
Thank you all, if anybody has question ask me, i'll happy to help you
Bye
Davide
Davidenji said:
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
Click to expand...
Click to collapse
Nothing strange about what is in photo #2! That is the debugger screen.
Looks like you got it rolled back to the original ROM but if you decide to put the latest stable ROM 6.5 on there you're going to have to follow the Chef's directions in the above supplied link.
Good luck,
Chela
glad you found it out, you are right, there was something wrong with the radio, which is why in screenshot #1 there is only the radio listed and i think that's also why in #4 the comm icons are red, i've never seen that before, but could also be a custom skin in that rom.
brujeria is right, there is nothing wrong with the 2nd and 3rd screenshot, except for the 2nd one only showing the rom and no radio or protocol, meaning that the device was probably resetted by pulling out the battery and not pushing the reset pin with the stylus, unless that was also a radio issue.
unless you already started customizing your device you should probably think about hard resetting it once again and trying if that works, or even re-flash the rom, without flashing the radio, that way you'd know for sure, if from now on you'll always have to flash a "baked rom" (usually a term for a cooked rom, together with radio and extrom, a full flash, in this case i mean rom and radio rom, since the extrom is not really flashed anymore).
with best regards,
Chef_Tony
i've already customized...a little! Now, everytime i soft reset i read this: R 1.15.00 , G 1337.45 , D 1.21 michy.
I've no problem at moment..but i hope i won't never hard reset!
This Rom (WM6.1 included only Rom upgrade) it's nice, but i'm interested about WM6.5..anyway i think to keep this one untill a problem will come out
P.s. Like you say, now the antenna isn't red anymore..it's bright green
Thank you a lot for the support guys!