Database Develop

sx66 bluetooth expired. missing rom... here is a sollution!

SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.

Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck

i have the same problem.. since octobre without solution

Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck

hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!

Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun

DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!

Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.

This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.

I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.

please mamaich if you can find it this will be very helpful

Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.

Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:

new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.

what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you

problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.

hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?

Mda II Compact boot failture!

Hello gays!
I hav a problem with my Mda.
In my mda was windows 05 and i want to upgrade to 06
And im download rom from thiece site:
http://forum.xda-developers.com/showthread.php?t=305125
And i Upgrade rom thiece method :
ANOTHER FLASH METHOD :
If you have the chinese WM6 rom, downgrade to some WM5 with official RUU, then:
download this:
http://rapidshare.com/files/29098553...fixed.zip.html
Once you unpack it, please put the nk.nbf (charmer wm6) into the Shelltool folder. Open shelltool.exe. Click Get Rom info, then click Extract OS. Wait until its finished and you'll receive a file called 8004000-OS.nb (save it for later).
Download the xbeta Chinese WM6 rom : http://rapidshare.com/files/27671349...eta.exe. html
Extract it and put that 8004000.OS you saved before in the XBETA directory. In the itsutils folder of xbeta rom you will find enablerapi.cab and cert_spcs.cab. Copy them to your device, install them on Device Memory, then soft reset.
run xbeta.cmd and choose the 8004000OS.nb file to flash (you should be connected with AS and have your radio module turned off).
When the screen goes green and the flashing is finished make a HARD RESET!. Press Camera and Voice Dail buttons (hold them). Put and hold the stylus in reset button for 2 seconds. Release it. Wait until you see some white fonts on black screen. Then release those 2 buttons. Push the green dial button.
I choose thiece method becouse the first method in the rom subject doesnt work.
But after im instal new rom i have Era rom and when im complete upgrading to wm6 the phone is restart and im see era splash screen and its strange for me :/
So the problem is it is in startup screen showin Era splash screen and he STOP! i tried to hard reset but it gives fat partition error.
Please HElp me!

sounds like your device is CID locked at the time you flash it.. which gives you the same splash screen. However, the fat partition error (I presume it said format fail), is a big problem that AFAIK, it has no solution.
What you can do (at least) now is to put your phone in to bootloader mode and flash it (check the wiki, I think there is a section on this).

I turn on boot loader and i upgrade to another rom Era name and still thiece same Can you give me link with rom ?? to my phone ? Yes i dont unlock the cid

http://www.tm-phonedownloads.com/download_manager_mda_com2.html

Now i download my Net is so slowly :d when im download and upgrade i write and good luck to me ;]

Rom t mobile Doesnt work. Other minds?? But the splash screen is T mobile ;]
ipl 2. 06
spl 2.06. 0000
gsm 02.19.21
os 2.6.2.27
meybe Rescue Rom like i wizard ?? do you now where i can find it??

the splash screen indicated that it has already flashed, but, as I've mentioned above, the partition failure are more complicated than that and may not be fixable yourself. I can't help anymore now, you can try to find some other solution. Good luck.

How to unlock cid ?? can you tell me what i hawe g 3 or g 4

at the top section of this screen, there is this "XDA-Wiki", go in to the 'Wizard' section. G3 G4 CID unlock info is there.

Raptorgda said:
I turn on boot loader and i upgrade to another rom Era name and still thiece same Can you give me link with rom ?? to my phone ? Yes i dont unlock the cid
Click to expand...
Click to collapse
""Splash screen freezing -> SOLUTION !!! DIY
--------------------------------------------------------------------------------
Damn... I walked around and around and solution was all near me and able to do it myself...
Ok here´s how I done it.
First, I must explain what was the problem.
After update the firmware (not actually upgrade, I had the phone full of trash, so I decided to reflash same firmware v2.18 PTG), the Qtek 9100 / HTC Wizard freezed at 2nd splash screen (the one that shows OS versions IPL version, ect). Tried many different versions, upgraded to 2.24, 2.25, downgraded even to 1.6.7.3, but always same problem, freezed on second splash screen. I read many topics on xda-dev, and seen some people with same problem. Apparently there was 2 solutions. 1- send phone back to warranty. 2- write backup ROM from SD in bootloader.
Passed more then 15 hours asking for this SD backup everywhere, and COULDN´T find any help. Apparently no one had this "SD dump ROM Backup".
So here´s how I solved my problem
1- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem""
In Wizard forum

Oszi link doesnt work Do you have other??

Doesnt work sesion like that :
r2sd all
Get_BitData
***** user area size = 0x7A80000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512 And stop hiere
You have Wizard but i have mda 2 compact do you now?? ;]
But i have a idea can you give me backup files?? on cd card ?? i will put it on my sd card

Raptorgda said:
Doesnt work sesion like that :
r2sd all
Get_BitData
***** user area size = 0x7A80000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512 And stop hiere
You have Wizard but i have mda 2 compact do you now?? ;]
But i have a idea can you give me backup files?? on cd card ?? i will put it on my sd card
Click to expand...
Click to collapse
Yes I know!I have MDA cII to and not wizard!
You must other MDA cII !your pda is dead you must other mda cII and save the rom the new mda cII.
He say maybe work other Pda (mda c,mda cII,prophet and more)
(sorry my bad english)

I will put Sd card with backup from my own wizard meybe it is will be work if not i take backup from my firend (he have mda 2 c ) Sory for my bad english!

I will put Sd card with backup from my own wizard meybe it is will be work if not i take backup from my firend (he have mda 2 c ) Sory for my bad english!

Format Is Failed (!?)
Hi. I know that the focus is now on the new ROM, but I am having a problem with my MDA Compact II after following the alternative flashing method. Original details:
IPL 1.12, SPL 1.12.0000, GSM 01.11.20, OS 1.12.2.23
All seemed to go ok, following step by step as per http://forum.xda-developers.com/attachment.php?attachmentid=39129&d=1179243687 and I got to the end step with ‘Congratulations’. I had no error messages. However upon hard reset I got the message: FORMAT FAT PARTITION, FORMAT IS FAILED (oops!)
The screen then showed the same details as before, but with OS now 10.2.0.8.
I’ve done some searching on the Forums & tried restoring the phone via bootloader using both “MDAc2_ROM_Johnnnnnnnnnny_v1.0” (stalls at 99%) and “RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship” (this completes 100% & reverts the OS to 1.12.2.23, but I get the same FORMAT IS FAILED message).
Any further suggestions how I can revert to the original state, or update to WM6?
(My wife has an MDA II as well – I’ve checked my battery in her phone & it is fully charged).
PS Ignore the details at the bottom - I also have an MDA COMPACT (I)

Chameleon846: if you read carefully, you would know that you need at least bootloader in ver. 2.x to flash WM6. And seeing you have 1.x, no wonder it didnt flash poperly. GO find an official HTC Prophet rom and flash it with RUU. It will help.

no problem with this, this happen time after time on every ppc, it's random flashing error.
http://forum.xda-developers.com/showthread.php?t=307332
please, read forums before asking, this was mentioned many times...

vlodeck, thanks. A little knowledge... I stupidly missed the 2.x bit...
I've tried the RUU method with an official ROM. It completes all 100%, but will not go any further. I've seen bits about a restore from an SD card, but can't find the exact method (copying the nk.nbf file to SD & running bootloader doesn't do anything. If I manage to sort this am I able to upgrade the bootloader to 2.x?
Thanks.

Chameleon: not charmer official ROM. Prophet ROM!

Dead Charmer... maybe

Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?

Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.

Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.

OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!

By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?

Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!

You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.

Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?

If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.

Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!

petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR

Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC

Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.

if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?

I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.

Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!

Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?

Charmer dead. any solution?

have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.

Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD

Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?

I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.

I Think I've Bricked My Blue Angel????

Hi,
I am new to attempting ROM upgrades!
I bought my BA on ebay it runs on wm2003se but have never used it as a phone because it needed unlocking so i thought i would try to upgrade then unlock.
After many failed rom upgrade attempts one finally started to install, it got to 100% then i was promped to soft reset my XDAiis which i presume is the normal proceedure?
So i did this, but now it is stuck on the blue, green, red and white screen displaying,
No GSM
HTC BlueAngel D 6. 50.28.WWE
I have tried hard reset
I have tried to install the O2 rom that came with it but it says its the incorrect country version!
Any ideas or is it Dead???
HELP

first: try hard resetting!
the procedure changed in comparison to wm2003se, so you have to press reset+power, and then immediately press camera+record. a menu shows up, showing
Enable KITL YES
clear reg. hive NO
format storage NO
using the camera and record buttons, change these entries to
Enable KITL NO
clear reg. hive YES
format storage YES
and press the mail button to confirm, after some time you will see the device boot for the first time.
probably that solves your first problem, but since you seem pretty unexperienced (no offense), it probably unveils more problems. you should also make sure to read this carefully, maybe follow the upgrade wizard again, to make sure you formatted your old extrom and resized it, have a working radio rom, and to make sure you know what you are doing and how to go on improving you BA experience:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
greetz
Chef_Tony

Hi,
Thanks for your reply i have tried hard reseting and still have the same problem, any other suggestions???

run through the wizard in the link above, you will need to downgrade to wm2003se again, resize the storage space, upgrade to wm6.5 doing everything exactly as written in the wiki and you will have no problems, here there is the step you are currently facing:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
the downgrade from wm5 or above down to wm2003

hello !
my screen stay white after the
"Enable KITL NO
clear reg. hive YES
format storage YES"
part. How can I do ? thanks

and it's a xv6600

i am not an expert when it comes to the different names of the device, but a quick google search told me, your device is not a blueangel, but a cdma device, namely a HARRIER. the harrier does not support wm5 and up, so you should flash your original shipped rom back, to get it back to work.
if you do not have your shipped rom present (on cd) you can go to your carrier's website and try and download it there. if, however, it is not listed there anymore, you can go download it here:
http://harrier.atspace.com/
all credit for the shipped rom archive goes to xplode.
greetz
Chef_Tony

great link thanks