Related
Hello everyone!
Just moved from a P3600 to the P4550 and noticed something strange twice in the last 4 days. When I looked at the display in the morning (phone and WLAN were off overnight.....hardly ever turn on WLAN, as I only use it when travelling) I found that WLAN had switched itself on sometime during the night. What gives?
Any ideas would be greatly appreciated!
Thanks!
This happens to me also if:
(1) ActiveSync is set to "as items arrive" (i.e. push)
(2) There is no phone signal.
Apparently AS looks for the Exchange server, and not being able to find a phone signal, turns on Wifi to see if it can connect like that.
I suppose this will also happen if you have AS set to poll mail at intervals. When the interval time arrives, I guess AS will want to go online and - not being able to use the phone signal - will turn on Wifi.
Very annoying as it drains the battery. It does NOT turn Wifi off after a while.
Oh well.
This happens to me also if:
(1) ActiveSync is set to "as items arrive" (i.e. push)
(2) There is no phone signal.
Apparently AS looks for the Exchange server, and not being able to find a phone signal, turns on Wifi to see if it can connect like that.
I suppose this will also happen if you have AS set to poll mail at intervals. When the interval time arrives, I guess AS will want to go online and - not being able to use the phone signal - will turn on Wifi.
Very annoying as it drains the battery. It does NOT turn Wifi off after a while.
Oh - an afterthought: in CONNECTIONS I have set both programs accessing the net and programs accessing a private network configured to use MY WORK NETWORK. Don't know if fiddling around with that may stop AS turning on WifI.
Should you find a solution, please post coz I would like to fix this bug/feature too.
Hmmm.....if this theory is correct then going to flight-mode instead of just turning the phone off - should effectively not allow any kind of connections.....will check tomorrow....
Hello,
i use the Exchange Email Push and now i have changed my germen mobile provider. My new provider counts the data traffic in 100kb packages.
I've noticed, that the data connection went off after some minutes of inactivity. Because i use the direct push, the data connection suddenly reconnects.
So i have about 1 MB data traffic each hour, even when there is no mail.
Is there a possibility to hold the connection open?
The Kaiser tweak Option "Always On" does not work for me.
Is there a program which sends out a ping every x minutes so that the connection will stay open?
With my old provider, i had no disconnect.
Thank you
Special2k3
I had a similar problem after using the KaiserTweak's "auto disconnect" option (I don't remember the exact name of the option).
It disconnected after the specified period of time even if the connection was in use. After I reverted it, the problem was gone.
jahnotto said:
I had a similar problem after using the KaiserTweak's "auto disconnect" option (I don't remember the exact name of the option).
It disconnected after the specified period of time even if the connection was in use. After I reverted it, the problem was gone.
Click to expand...
Click to collapse
I have configured the Option "Disconnect After" to "Disable (Default)" but the Problem still occurs.
Special2k3
That's how Push email works, always checking. You can always turn off Push email and set the messaging program to check for email every x minutes.
You understand me wrong. I want the push programm to check always for new mails. But i don't want the internet connection closing every x minutes.
I need a permanent connection.
Special2k3
I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.
I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks
Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?
cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode
I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina
Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)
I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem
I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.
Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?
HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?
For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.
Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76
Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?
Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(
WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.
Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?
Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?
another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx
The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!
Hi Everyone,
Small but annoying issue which I was wondering if someone could help me with:
Many times (though not always), when I start a phone call - either if I call or when I receive a call - my wireless lan connection wakes up and start looking for a network. That happens even after I explicitly disable it via comm manager.
At home it's not a big deal, since it simply connects to my home wireless network, but on the road, it's a real annoyance, as it start looking for networks asking me which to connect (not to mention the impact on battery life).
So - any idea what can cause this behavior (if it helps, I'm using Dutty's 19/4 Lite ROM and I have MS Direct Push enabled)?
Thanks in advance!
might be that call disconnects data sessions (3g, edge,...) and since you are using direct push maybe this is trying to establish wlan connection (because 3g or something can't be established during call). try to check direct push connection options and maybe you can disable direct push wlan connection.
however, this is just an idea since i'm not using direct push and i use wlan connection only
A silly question by a new user: how is it possible to stop an internet or data connection (no matter if hsdpa, edge, gprs) once started?
Thanks
use 'long key press' in settings, can be set to disconnect a data connection (sdpa, edge, gprs)
Use this program:
http://rapidshare.com/files/173250379/GPRS...onnect.CAB.html
The connection stop after 1 minutes of inactivity
jack1985 said:
Use this program:
http://rapidshare.com/files/173250379/GPRS...onnect.CAB.html
The connection stop after 1 minutes of inactivity
Click to expand...
Click to collapse
faulty url!
take this one:
GB-SOFT GPRS-UMTS_Tweak_WM6.1_Diamond
there you can choose the idle-time for disconnect
Anyway the manual stopping mode is to tap the bar that is on the top of the sceen...than tap the G E 3G or U icon and so you can tap disconnect.
Poker85 said:
Anyway the manual stopping mode is to tap the bar that is on the top of the sceen...than tap the G E 3G or U icon and so you can tap disconnect.
Click to expand...
Click to collapse
Cool, also in stead of holding the end call button, wich locks the phone in my case,
Dubbelclicking the end call button alse ends my edge connection.
In order for your end key to stop the connection, you have to go to Settings>System>Long Press End Key>Select Terminate data connection
Then when you press and hold your end key, it will end the connection
if you prefer to stop internetconnection by shortcut, try VJKeyPress.exe 126
this one toggles internet connection
i've searched and i've searched and i cant find the resolve!
after retrieving hotmail, the connection stays active, meaning bars are lit up. for HOURS after unless i long-press-end key or something like that. even when i am surfing the web, after a page is fully loaded, the bars stay lit. on my old diamond, the bars used to go gray or "dormant" etc. therefore no tweaks i have found help (i.e. most operate with this rule "if the connection is dormant/inactive for xx minutes, turn off data" etc. well my connection remains ACTIVE unless i manually intervene)
what is causing this??? i only have spb mobile shell and spb phone suite installed. stock ROM.
hello? anyone? NO one is having the same issue or can help with this??? at this point i'd even be happy with a rude comment about how i should learn how to search coupled with a few links to threads which contain the answers! :\
I'm not sure I understand your question.
You're saying the connection stays alive after using mail or opera?
By default, WMo does not turn off data connection, so once you've made a data connection, it stays on.
Now, there are lots of programs out there that turns off data connection after a pre-set time. If you have Advanced Config on your Diamond, it's somewhere in there as well (I use SKTools and not Advacned Config so I can't point you exactly where, but it's there)
That said, many have tested battery drain and find that leaving the data connection ON or OFF makes absolutely no difference on the battery drain. It's only when you're transmitting data that drains more battery. Not sure if that's where you're coming from to want to turn off data connection
number16 said:
I'm not sure I understand your question.
You're saying the connection stays alive after using mail or opera?
By default, WMo does not turn off data connection, so once you've made a data connection, it stays on.
Now, there are lots of programs out there that turns off data connection after a pre-set time. If you have Advanced Config on your Diamond, it's somewhere in there as well (I use SKTools and not Advacned Config so I can't point you exactly where, but it's there)
That said, many have tested battery drain and find that leaving the data connection ON or OFF makes absolutely no difference on the battery drain. It's only when you're transmitting data that drains more battery. Not sure if that's where you're coming from to want to turn off data connection
Click to expand...
Click to collapse
number16, my savior! i'll try to explain as best i can: when the data connection is started/being used, those left-right arrows appear above the signal strength, correct? what i call "active" is when those arrows are lit (presumably when data is actually being transferred). what i call "dormant" is when the arrows are still there but are gray/not lit (i.e. connection is still open, but not currently transferring data). well, up until a 2 wks ago, all seemed fine - the arrows would briefly stay lit when downloading a page, connecting to hotmail, etc, but then would go gray once the transfer was complete. now however, the arrows stay lit. sometimes for hours at a time even tho nothing is running, no data (that i know of) is being transferred, etc.
so what i was saying is that, yes, i know i can long-press-end key to shut it down, but that only works if i notice it otherwise it's just draining my battery. (most times it is in my pocket, and since it checks hotmail periodically, the data connection may open and stay on without me noticing). and yes, i know about advanced config setting (and actually, i DO have it set to turn off after a minute) BUT that only applies if "connection is not active for more than a minute". i.e. since my whole problem is that my data connection technically stays active, that advanced config setting doesnt work.
so my question is, what is keeping the connection active? why is it doing this? i am running stock ROM and only have spb mobile shell and spb phone suite loaded. and a few other minor tweaks via advanced config/regedit. i even tried spb wireless monitor to see what was active after a data transfer was complete (as far as i could tell) but it didnt really tell me anything.
does all that make sense?
thanks for any help you can provide...