I have a BT GPS BLuetooth and an XDA IIi device. I can pair the devices using the standard 0000 code, but it displays with a ? on my device (even though it said pairing sucessfull).
It should also say "this device has serial support, would you like to enable?" however it doesn't display. It worked fine on my Windows 2003 XDA II device, but since I now have the XDA IIi deviece with WM2003 SE it doesn't work.
Could someone please advise, its driving me nuts.
:roll:
Many thanks in advance.
Related
This is driving me nuts...
I have bought an XDA IIs (and love it) and needed a car kit, so bought the one recommended on the O2 website - the Sony Ericsson HCB-300.
I had the kit professionally fitted, and sat in my car at lunch time eager to get it to work.
It goes through the motions - it pairs up no problem, and I enter the 0000 code. However, when it goes to connect it just sits there for about 15 seconds, then announces "Connection unsuccessfull".
I have read a load of posts about patches for this device, is this what I need or do I need to change any settings on the devices????
Thanks in advance!
Steve
Steve,
I have the HCB-30 not the 300. However, once in a while I have the same problem as you. I get around it by deleting the BT pairing that exists, then hard rebooting the O2 unit, then pair it up again.
I think the BT software in the O2 XDA IIs is stuffed up. I have to hard reset my O2 unit regularly as it doesn't automatically link up to the HCB-30. I had no problems with my XDA II
I hope my suggestion helps you out.
I got a new car last week with the HCB-300 pre-installed and I have exactly the same problem - pairing no problem but no connection. I tried upgrading to the latest 1.40 ROM and then it worked just fine.
However, after reinaastalling TomTom Nav 3 it doesn't work again so I have come to the conclusion that TT3 and HCB-300 are incompatible. I'm looking for a solution still and if I cure it I'll post ot here.
Very annoying indeed.
Hello,
is there a way to have the microsoft bluetooth that is on the XDA II on the XDA III ?
Thanks
And my question is : Oh my god, why?
All users of XDA II wants to have another BT stack. We are trying to use Widcomm (Which is in the XDA III) or another else than M$, which is almost useles...
As mentioned by kopecek, why would you prefer Microsoft drivers?
Having had an XDA II which only had Microsoft Drivers, I love my new XDA IIs which comes with Widcomm/Broadcomm drivers. There are more profiles here that Microsoft does not have.
Microsoft does not support Handsfree profile for Bluetooth handsfree which was a real pain for those still stuck on Microsoft drivers.
Besides, you can do anything with the Widcomm drivers that Microsoft can do.
First of all (but I am ot sure it comes from the widcom drivers) people hear me less well on my car kit with my Qtek 9090 than with my Qtek 2020.
Second of all (and I know it is not very important but it makes me nervous !!!) everytime the bluetooth is in use it switch on the phone. And when I make a phone call and hang it up I always switch off my phone like that it is safe in my pocket. But with the headset profile of the widcom you have to wait 5 seconds after you hang up to switch it off. Same thing when I enter my car the phone switch on when it pair with the car kit....Not realy a big deal but I wanted to try if it was possible with the microsoft drivers wich where on the Qtek 2020.
That's my reasons... :wink:
I solved my problem by only pairing the Qtek with my car kit and don't create a Headset profile. Like that when I am using my phone out of my car the phone is not trying to search for a bluetooth device and when I am in my car it recognize the Qtek and use it to place calls.
I AM NOW OFFICIALLY TOTALY IN LOVE WITH MY PHONE !!!
hi, I have an O2 XDA IIi and have a Qstarz BT-Q880 bluetooth GPS receiver. I can connect the XDA to the device but it only shows in the outgoing connections (and not the incomming connections) in the Bluetooth active connections manager on the XDA, is this correct?
Also the connection is disconnected after a couple of minutes, is this normal and if so how do I get it to stay on?
The reason I ask is because I cannot get my Tomtom 5 software to find the bluetooth GPS receiver.
Is it a faulty receiver or is my XDA faulty or could they just be incompatible with each other or Tomtom.
Thanks in advance for any help offered.
Hi,
Try this thread first http://forum.xda-developers.com/viewtopic.php?t=40023 hopefully it should sort your problem out.
Can not connect Bluetooth please help...
--------------------------------------------------------------------------------
I have tried to connect my qtek 2020i through bluetooth with my carradio. It is a blaupunkt casablanca MP57 with a bluetooth interface audio device.
When I search for device it finds the radio, next the security code is asked, I enter it, next it is paired. I have checked the "Hands free" option.
On the display of the audio device on the qtek, I can see the radio but I can not use it . When I try to make a call it says "Connection Failed".
When I use a a bluetooth headset it is working ok,
Is there a bluetooth update for an qtek 2020i?
Does somebody know the solution....
Many Many Thanx!!!
blaupunkt hamburg mp68 bluetooth problems with xda 2i
hi all,
a week ago i bought a new car radio, blaupunkt hamburg mp68. i have some difficulties, to connect it with a xda 2i. the xda can recognize the radio, but it's not connecting. does anyone have any ideas? blaupunkt bluetooth connection perfectly works with a nokia e50, and a nokia 6310i (that's a surprise!), so i don't understand the situation at all. previously my xda was connected with a bluetooth headset, a gps reciever, other phones, and my laptop, and it all worked fine (and still works fine). should i search for some kind of update for my xda? what are you recommend?
thanks for your help!
vic
hello,
I would like to buy a Parrot CK3100 (BlueTooth car kit), but I wonder if it works perfectly with Himalay under WM2006. Is the directory correctly and automatically loaded on the Parrot ? Are all the functionnalities of the Parrot working with the Himalaya ?
Thanks in advance for your answer,
regards
Blg
You shouldn't be able to access your contacts through Parrot CK3100.
Sascha
Ok, thanks for your answer. Have you tried the XDA II on the CK3100, or is it just a bet ?
The reason why I a m asking this question is that on a GPS device (Garmin ZUMO), the directory is automatically and correctly loaded (as well as the last received numbers and last dialled numbers). So it seems that the XDA II is able to do it.
Is there someone owning the two devices (XDA II and CK3100) who could confirm the good or bad working ?
By the way, my ROM's version is 7.0c.40CS.
Thanks in advance.
Blg
blg said:
Ok, thanks for your answer. Have you tried the XDA II on the CK3100, or is it just a bet ?
Click to expand...
Click to collapse
I use CK3000 but I would be surprised if CK3100 could access XDA II contacts.
Sascha
I understand your surprise.
But I was surprised when all my XDA II contacts have been downloaded automatically and without being prompted on my Zumo device.
Seems the WM2006 allows this (at least on my XDA II ))
This is the reason why I am looking for someone owning both CK3100 and XDA II under WM6 !
Blg
Yes, it works!
I have a Qtek 2020 (aka Himalaya) and a Parrot CK3100 Black Edition and it works (almost) perfectly.
When you turn on the ignition the Parrot activates showing the Owner Information, the Network you’re connected (operator), the Signal Strength, the Battery Level and it synchronizes the Contacts, even the ones you have multiple numbers (ex.: Thomas w/; Thomas h/ as in Thomas (work) and Thomas (home)). It even gets the last Received, Dialed and Lost calls (not always). You see an ActiveSync alike symbol from times to times showing the synchronization.
Every time you turn off the ignition (electrical circuit) it clears all information and you´ll have to wait until it synchronizes again after you turn it on.
The only glitch it has is that sometimes (1 in 100), when they «meet», the PDA starts a call to nowhere and the only way to stop it is to reset the PDA (the pen tip in the hole).
Hope this info helps
Thomas
TOFCLOCK HIMA WM6 AKU.0.7.0
CE OS 5.2.1908 (Build 18508.0.7.0)
Thanks Thomas, your advice as owner of both devices was the one I was looking for !
So, it seems I can buy the Parrot.
Thanks again !
Himalaya & Parrot Ck 3100
Hi gents :
I have both devices (Himalaya & Parrot), and almost everything is running fine.
Parrot and Himalaya synchronize automatically.
Only one thing :when conecting GPS and Parrot, if I let these devices to connect automatically, the phone sound is really bad, I have to cut down bluetooth hans free connection and retry again after few seconds.
Then, everything is OK.
Suggestions are welcome
Hi,
following ThomasScott, I have bought the CK3100. Got it today. I have tried it only few minutes but it seems to run fine. Synchro of directory is OK, and done when Parrot is on.
I will install it definitively tomorrow, and will try to connect both GPS and Parrot, to check if I have the same problem.
Blg