[WM2005] Wifi Resume Fix! - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Ok guys, I believe I've found the regkey to fix all the dropping wifi issues within WM2005. This has been tried and tested on my Blue Angel SX66 Cingular with the hack listed in the wiki to get up to WM2005. Anyways, to the patch, unfortunately I don't know how to make cab's so follow along. Get yourself a registry editor (i.e. TRE) and navigate to HKEY_LOCAL_MACHINE\Comm\"Your Adapter Name. Mine had 2 keys, tiacxwln and tiacxwln1, tiacxwln1 was the ticket for me" Within the Parms folder you'll find a DWORD value named ResetOnResume which should be set to '1' change that value to '0' and hit ok in the bottom left corner. Give your BA a soft reset and all should be good. I haven't tested this for side effects, but it now reconnects to wifi on resume without a hitch. Please post results back here, I hope I am not jumping the gun!
TIP: To find your adapter name go into Settings>Connections>Network Cards>Network Adapters and look for "xxxxxxx Compatible Wireless Ethernet" again, mine was called 'tiacxwln Compatible Wireless Ethernet'.

Hallelujah!!!!!!!!!!!!
This has been my number one gripe with WM5, everything else as just been small annoyances. But this one... I use WiFi a lot, actually almost every time I turn he thing on. I even got WiFi in my car! So thank you, thank you, thank you, thank you, thank you!
Oh, do I have to say that it really works? :lol: Qtek 9090 btw.
You who try this, don't forget to turn off the unit for 15 seconds before you do the soft reset, this flushes the registry.

This also appears to work on WM2003, at least with my SX66 running the current revs from the SX66 Standardization Project.

WOW ... its perfect ..... you're realy MAN !!! thx thx thx.....

I've updated BA_WM5_FIX.CAB so that it sets this registry value:
ftp.xda-developers.com/Uploads/Blueangel/wm5_test/BA_WM5_FIX.CAB

with this registry setting wifi on my BA will not stay off. anyone else getting this?

Yes, I see the same thing. Now suspending the unit will turn on wifi on resume. So is that a problem for those who worry about battery life? Probably. Do I care? Nope! But then I'm in my own home around 90 % of the time, within reach of the charger. No, I'm not a slacker, I actually run a business and work 8-10 hour days, but I have my office at home!

Sorry guys I don't understand what's happening. What's going on with the wifi?

brn2prgrm: On WM5, if you turn Wifi on, switch the device off, then back on, Wifi does not resume. This action was default on WM2003SE. The registry key that makes Wifi resume by itself when you turn the device back on was found, and then integrated in the WM5 patches CAB. That's basically all

Eh...it was he who found that key! What he's wondering about is why it isn't possible to make it stay off when you have enabled this key, even if WiFi is off when you suspend, it will turn on when you turn on the PPC again, which it didn't do in WM2003. It was restored to last state, on or off.
Another thing: Has anybody tried this hack with the wireless control app from the Universal that was posted here a while ago, to see if it stays off then?

mamaich said:
I've updated BA_WM5_FIX.CAB so that it sets this registry value:
ftp.xda-developers.com/Uploads/Blueangel/wm5_test/BA_WM5_FIX.CAB
Click to expand...
Click to collapse
I think there is a TYPO in the cab file.
I found the reg setting as tiacwln1
Shouldn't this be tiacxwln1 ????

yes, it is a typo.
I've removed the mistyped key from BA_WM5_FIX.CAB and made a BA_WIFI_FIX.CAB which sets the correct registry value. They are in the same dir on FTP

I don't understand the wifi thing:
I get some connections from my neighbours,but my own linksys won't connect?
What do I have to do to connect my MDA to my linksys router??

since I upgraded to WM5 I can't get my wifi to operate 100% of the time--for example, when I connect to wifi--the signal is locked then I try to send/receive my email and then my SX66 tries to connect via GPRS--do I have a setting that's incorrect? or is it because of this thread which is now patched?? HELP--I use my wifi a lot and lately I can't TIA!!

Mastiff said:
Eh...it was he who found that key! What he's wondering about is why it isn't possible to make it stay off when you have enabled this key, even if WiFi is off when you suspend, it will turn on when you turn on the PPC again, which it didn't do in WM2003. It was restored to last state, on or off.
Another thing: Has anybody tried this hack with the wireless control app from the Universal that was posted here a while ago, to see if it stays off then?
Click to expand...
Click to collapse
I'm waiting for a patch that does exactly what you thought off, restores its last stage. Not sure hwo long would it take to come out with it.
Anyway, I do not find it a hassle to Turn On Wifi once again instead of it swtiching on by itself upon power up..... I use wifi a lot too though, but haven't found a prob with it.

how about a registry patch that fixes that bluetooth auto turn off annoyance?

O2 XDA IIs (wifi)
Hi , I have recently upgraded my 02 xda IIs to WM5 ,
after applying the patch , wifi worked for a while , then now when i try wifi again, i get this error.
FORBIDDEN.
you were denied access because: access dinied by access control list.
Someone please help me.

Related

WM5 WiFi

Hi guys and girls.
I finally plucked up courage to install WM5 and suprisingly, it worked like a charm! not one single problem
There is one cherry on the top that would be very nice if anyone can help.
On the today screen there is a nice little bluetooth icon in the bottom right hand corner; is there any way to get a wifi icon next to it instead if having to go into start > Settings > connections > WLAN to turn it on?
Appreciate any suggestions offered.
Cheers
J
can someone please send me the orginal wirelessmgr.exe file? i tried to load the wirelessmgr.exe from the universal and now i cant turn wireless on or off
Codiac, I have taken a hotkey (camera, I don't use that much anyway, but any key would do) and mapped that to WLAN_MAN. Works very nicely, but I hope there will be a fix for the dissappearing WLAN (and BT, even though that doesn't matter that much to me since I never turn off the unit when I'm using anything BT) in the near future.
I never thought of that works spot on now :lol:
Must remember in future to engage brain before fingers :?
Cheers Mastiff
J
I added the program into O2plus apps tab
Codiac said:
On the today screen there is a nice little bluetooth icon in the bottom right hand corner; is there any way to get a wifi icon next to it instead
J
Click to expand...
Click to collapse
Codiac... how did you get the bluetooth icon on the Today screen? I just upgraded to Mamaich's Patch 5 but I don't have a bluetooth icon
me too..i can't see the bt icon and sometimes i quicly need of it..how can i show it?
Read the Wiki about missing files, patches number 1: http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
This is wierd?!?
After I did the upgrade the nice little BT icon was on the today screen, never bothered with it because BT is useless. Read these posts and had a look to see if I could work out how it got there and it has dissapeared?!?
The only thing I can think of is that I accidentally uninstalled one of the patches downloaded from wiki.
ill try and get it back on and let you know how I did it
Cheers
J
OOPs, sorry should have read Mastiffs post properly first
Mastiff is right, you need to install ba_wm5_fix_v1
Cheers
J
Well I've installed the BA_wm5 patch, but still have wifi problems. On 2003 my BA used to turn on wifi every time i turned on the unit, great as i have wifi at home and at work, now it always defaults to off and I have to switch it on every time I've turned off my BA. It's driving me nuts as I use email via wifi at work all day. Is there any way to get the wifi always on? Please....?
That's what I've been *****in' about for more than a week now...
Surely there's a way to default wifi to on, here's hoping somebody works it out before i downgrade to 2003.
i douwngraded to wm2003se..wifi on wm5 don't work at all..dosn't connect on my AP (on wm2003se is very fast)..so..because i need it i'll wait a more stable version..perhaps backlight regolation will be fixed
Backlight regulation was fixed more than a week ago! And I don't really know why you have WiFi problems, I have only one problem, that it defaults to off.
Mastiff said:
Backlight regulation was fixed more than a week ago! And I don't really know why you have WiFi problems, I have only one problem, that it defaults to off.
Click to expand...
Click to collapse
The default to off is the problem. I use my BA for work only. At home I use my wifi network to access work schedule appointments, and when in the office I use their wifi hotspot. At present i am having to tun on wifi realistically around a hundred times a day to update my joblist.
Is there a way to add any sort of utility to startup to turn it on at power on maybe?
I've tried everything to make my WiFi work but no luck.
However, I think I'll hold on because I really like WM5. I've ran through all the registry setting but nothing I've tried so far has made a difference. Enev tried downgrading the encryption settings on my MIMO. Furthermore, when I take off SSID broadcast, my BA seems to be able to see the AP but still fails to connect.
It's really annoying because I like to synchronize Avantgo over WiFi and most importantly use my BA when I'm in the bathroom doing you know what. Somebody please help!
Hey Mastiff, what security settings have you got enabled on your Access Point?
Mastiff said:
Backlight regulation was fixed more than a week ago! And I don't really know why you have WiFi problems, I have only one problem, that it defaults to off.
Click to expand...
Click to collapse
Cytrax, did you install activesync 4 to upgrade your rom? You can't sync by wifi on activesync 4 at all, they've removed the option from the program!
cytrax, I have 64 kbit WEP and MAC access control since the 128 kbit WEP was slow to access with another CE unit I have.
Thanks for that info, mastiff.
OK, this is wierd! At this particular point, WiFi works on my BA. However, it only works when I'm at work. The settings configured on Work AP is very similar to what I've got at home. The only difference is I use Netgear MIMO at home while Buffulo Airstation is deployed at work. This is really freaking me out (well, not exactly, but it's annoying).
I also tried with an old Belkin AP last night but didn't get any luck. I think I'm going to try 64bit WEP once I reach home. Watch this space!
Mastiff said:
cytrax, I have 64 kbit WEP and MAC access control since the 128 kbit WEP was slow to access with another CE unit I have.
Click to expand...
Click to collapse

New ROM on FTP (logout 5.4.03) Now V5.4.05.HN

It seems logout has updated his WM5 ROM.
This is based on TuMa 1.4 but with the pre-installed applications removed to speed things up a bit.
I've no idea what's changed since 5.4.01 as there's no readme/changelog and don't have time to test it right now.
hi have download and tried this rom, but stop im middel off upgrating on my BA stop over 40%
wait for more info..
I upgraded successfully to this ROM just now. I was using the old Logout rom, so I hope this is a bug fixing update.
Will post feedback when I test it out.
WM2K5 V5.4.03.HN (V5.4.02.HN only in Vietnam)
ftp://xda:[email protected]_Updates/Logout/Logout_WM2K5_5.4.03_HN.rar
New:
- RamDisk32 and change some path to RamDisk (IE temp file, Mail attd file ...)
- MS BT Stack. (BT headset didn't test)
- Add sms alert Fix
- Add Disable Cert.
- FlightMode App
- Backup
- Task manager
- SoftKeyEx
- Change reg and replace some file from Hima 2.03 (Thank Bepe, Tofclock)
- Ext_Rom autorun
- And some app from Ext_rom
EDIT MDAIIIUser
Moved file to safe place corrected link
Hi logout,
I have to say you nailed this version nicely. fastest ROM ever.
good work dude. keep it up. thanks you.
imatrix
Agreed. This is a really fast ROM.
Congratulations Logout, you just won the speed crown that used to be held by Ivan v4R2.1.
One bug I've spotted with the inbuilt taskmanager - don't use the "cpu usage" option in the menus. It hardlocks the Today screen, only a reboot returns things to normal. This is not a fault of the ROM though, and I'm otherwise really pleased with this new taskmanager, waaay more detail.
When I use Logout previous version 5.4.01HN, i tryin to use my XDa2s as a USB modem, when i choose wireless modem in program and change connection type from serial to USB like the documentation from wiki, and click start, but its shows error and I cant use my XDA2s as USB modem.
And can you teach me how to connetc internet using incoming and outgoing port on blootoh ini your newest ROM.
Thanks Mr. Logout you the best.
I am testing this ROM and, as the latest one, is really fast. The only problem I've found by now is that the phone suddenly after a soft reset refuses to start. Clicking on the antenna icon shows it is "Out of service", and there is no way to make it work again but hard-resetting the device (losing everything in the process, of course).
Maybe I'm doing something wrong? Can anybody help here?
Anyway, thanks for your work Logout.
thanks a lot
let's enjoy and debug it!!!
Great So Far!
Well, so far:
* excellent speed
* the voice speed dial works great with my Jabra 250 BT, HOWEVER it seems when I'm in a call only the audio out works on the hands free, you have to put your mouth next to the phone mic to have any chance at the conversation. Further testing pending
* active sync worked flawlessly
* Bluetooth still does not remain on during standby :-( ... the never ending curse continues!
that's all the testing I have for now, will try some more, but so far so good!
Thanks... logout ... i love u rom... Great job!
Thanks for Sharing
:evil:
hi, all
i have reflash by ba an d now everything is ok..
just like to say that the speed is fantastic on this rom... thanks
and seens to be very stable.. i will continue test and report if i find a issue.
thanks again.
great ROM, but, after soft reset, it looses the time and settings(various registry changes i make like registering resco explorer and some other apps). WMP10 behaves a little odd in beginning of any song.
But, as said above, the ROM is indeed stable and works like a charm irrespective of the bugs mentioned above
kudos to LOGOUT
thingonaspring said:
Taskmanager - don't use the "cpu usage" option in the menus.
Click to expand...
Click to collapse
Task manager I extract from Hima 2.03, maybe CPU USAGE work in BA not well. Download new version & copy to windows\
If use backup built-in to restore data, after restore don't press OK to reboot immediately - wait a few minute to update registry then reboot.
A couple of things that I have noticed...
First of all.. Well done... The Rom seems to be very stgable, and damn fast!
OK.. a couple of bugs... (well.. maybe just me being an idiot!)
First.. I love the way that you have set the Ext_Rom to automatically install.. however.. why have you included the rst command in the config file?? would it not be easier to leave it out, and then power off and soft reset manually?
Second.. MS BT Stack & Wireless Modem.. Works great, about 85% of the time, and then reconnects saying PPP link protocol not connected in Windows.. hmm.. a quick radio reset and then it works again. It even connects WITHOUT the Wireless modem software!! (However, you need a soft reset or to activate flight mode to switch the phone back on!
SPB pocket Plus works fine,
The camera driver seems to work better than other versions i have seen, however i cant play back files that i have previousely recorded. They just show a series of still images!!
I installed a few games and stuff as well.. BTW Netfront 3 didnt work for me!
Keep up the good work!
Greetz from Malta..
Juggles
Soryy, I found another bugs when i tryin WIFI in my class today. When I turn off, it on again, and again.
WiFi
Hi Logout
I installed your new version and started with testing. It's fast (exept PIE, but nothing new) und seems stable.
On my device, I got several problems with wireless:
Cradle-Issiue:
When my device is connected (and running) to the pc and I plug out the usb-cable, wifi won't work. Wireless is connected to my access-point, but no traffic, when trying surfin or sending/receiving.
When I power off the BA and then plug out the cable, wifi will work after powered on the BA. I use these also to prevent a soft-reset when I forgot to power off before unpluging.
Allways resuming:
When the device is powered off, while wifi was enabled, wifi will restart automaticly after power on. When wifi is disabled, it will also be restarted after the next power on.
The work-around for this: Set the "ResetOnResume" (HKLM\comm\tiacxwln1\Parms) Value to 1. For me its working.
Does anybody know, if the new ms-pushmail-service could be added on a BA?
Thanks for your work
Chris
PH20B
ROM: 5.43.HN.WWE
Radio: 1.15.00
Prot.: 1337.45
hi logout..
afther of 1 day off testing, the ongly issues i found is the wifi, afther i put im on, it stays on... . i will trie the solucion off chrischi.
and afther i take out the BA of cradel, i need to close activesync, becouse if i dont do this, afther i clic on power button, he after 1 minute, resumes im self on.
but is very stable, on morning i dont close activesysnc and put my BA on pocket. afther a few minutes i take im and a lot off programs if on i ongly need to close everything and put im again on pocket
i ongly made a soft-reset becouse off wifi..
thanks
Great rom Logout!
I it the fastest ported version, but has some bugs. When you enable speakerphone in phone mode the notification for it stays even after you ended call. I had some problems that i can not enable bluetooth and wifi , then softreset fixed this bug temporary
Crash
After trying to activate or deactivate wireless, my Qtek freezed. I had to softreset the BA:
The phone can't be activated. Also "no service" indicated, when clicking the antenna-icon - the same as bolopez wrote.
Also the Calendar, Contacts & Tasks can't be started (I synched them with the exchange-server). ActiveSync appearing, but not working.
Perhaps the problems could also be caused by activesync. When uncraddling the BA, it allways showed the icon with the two arrows in titelbar like in the state of connected with the pc.
Greetz
Chris

Newbie cant connect to wifi, pls help

Hi There Guys
I bought my MDA Vario a couple of weeks ago, and its great, but I just cannot seem to connect to wifi.
I have read all the posts on modaco and taken all their advice and tried everything - apart from flashing the ROM.
As I understand it, once I flash the ROM, it will work. Is this right?
Also, this ROM is unofficial right?
What ROM version do I need and how do I flash it?
Thanks so much for your help,
Jamie
1) Make sure you turn the WiFi ON.
2) Try testing with two different APs (and make sure they're not set to G only mode).
3) If the WiFi don't work with the stock ROM, your device is defective. Flashing the ROM isn't going to help. Bring it back and get another.
wifi is turned on and my router is set to transmit on both b&g.
But because I can connect to the wireless network at uni, I dont think its defective (Unless the uni wireless network is something completely different)
802.11g
Try this:
Get a registry editor (PHM's works groovy)
Go to HKLM\Comm\TNETWLN1\Params
Open the DWORD value for "dot11SupportedRateMaskG" and change from 4 to 8, save that.
Exit the registry editor, wait 10 seconds. Soft-off with power switch, turn back on, then do a soft-reset.
I've a Linksys G wireless router at home, and setting the Wizard to accept G signals is the only way I could get it to work (even with the router set to B & G support).
802.11g
Try this:
Get a registry editor (PHM's works groovy)
Go to HKLM\Comm\TNETWLN1\Params
Open the DWORD value for "dot11SupportedRateMaskG" and change from 4 to 8, save that.
Exit the registry editor, wait 10 seconds. Soft-off with power switch, turn back on, then do a soft-reset.
I've a Linksys G wireless router at home, and setting the Wizard to accept G signals is the only way I could get it to work (even with the router set to B & G support).
I believe the WiFi in these phones is much lower-powered than in a notebook PC, so you won't get the same range as your laptop computer.
Make sure you go to Settings -> Connections -> Wireless LAN -> Power Mode and move the slider all the way left, to "Best Performance"
hey guys, thanks for your replies....
Ill certainly try that reg edit, thanks for that - I went on the PHM website, but what one do I download?
I click on pocket pc, then I click on PHM Regedit (I assume this is the application I need)? I then click on download, but I dont know what version to download?
There is "PocketPC 2002/2003" Then about 3 other PocketPC 2000 versions (with letters after them like ARM, and MIPS)?
What one do I need? I cant download the desktop one because I use a Mac (just to make life complicated) so I thought I would download the Pocket PC version and bluetooth it to my vario, I might try the 2002/2003 one because I only bought it a few days ago, so its the newest version, is this right?
cheers
jamie
well I successfully managed to install it on my vario, but the registry thing you said isnt there....
I go to :
HKEY_LOCAL_MACHINE > COMM > TNETWLAN1 > parms
now there is a "dot11SupportedRateMask" but not a "dot11SupportedRateMaskG".
Any suggestions?
cheers
jamie
well I successfully managed to install it on my vario, but the registry thing you said isnt there....
I go to :
HKEY_LOCAL_MACHINE > COMM > TNETWLAN1 > parms
now there is a "dot11SupportedRateMask" but not a "dot11SupportedRateMaskG".
Any suggestions?
cheers
jamie
Hey guys - reached a solution!
here are the all the details of the "g" hack:
[HKEY_LOCAL_MACHINE\System\GWE\Menu]
“AniType”=dword:00000000
[HKEY_CURRENT_USER\ControlPanel\Keybd]
“EnableIndicator”=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
“CacheSize”=dword:00000400
“EnableCache”=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt]
“ReplStoreCacheSize”=dword:00000400
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\Parms]
“dot11SupportedRateMaskG”=dword:00000008
“dot11SupportedRateMask”=dword:00000001
only problem is, its really slow!! any ideas on how to speed it up?
jamie

TomTom Sound Issue

Question -- I have TomTom on my Tilt ... it installs fine, and works fine ... however each time I start it up the sound is turned off .. .and I have to touch the screen, turn on the sound twice before the change in settings "sticks" and I get the voice giving me directions.
Any thoughts how I can fix this?
Mine does the exact same thing, otherwise it works perfectly. Running XDA Live 1.1 ROM...
That is the default function. You must always activate the sound after starting.
GSLEON3 said:
That is the default function. You must always activate the sound after starting.
Click to expand...
Click to collapse
hate to tell you guys, but it's not the default. The sound is on when I fire up Tom Tom on my Tilt, I've never had any issue nor had to go into settings to turn it on before. Are you guys using a ROM other then the original one?
Default off on both my HK Kaiser & my AT&T Tilt. Don't know what to tell you.
Solution that works for me!
I have found that all I have to do is to rotate the volume wheel on the side of my Tilt and the sound gets turned on without having to go through the preferences menu. It will repeat the last direction when you do this but it doesn't bother me too much and it lets me know that the sound is enabled.
The same issues occur with the previous version 6.03
And on other PPCs as well (eg IPAQ hw6910).
But it does not happen always, so I deduce it's related to conflicts with other softwares.
And it certainly isn't a feature, as a previous poster suggested.
TT as a default always starts with sound ON.
weinson said:
Question -- I have TomTom on my Tilt ... it installs fine, and works fine ... however each time I start it up the sound is turned off .. .and I have to touch the screen, turn on the sound twice before the change in settings "sticks" and I get the voice giving me directions.
Any thoughts how I can fix this?
Click to expand...
Click to collapse
I didn't have this problem until about 30 minutes ago, I received the Carcomm Cradle I ordered for the car, installed it, tried out TomTom and now I have the same problem as you.
Are any of you using a Carcomm Cradle?
The only other thing I changed before the sound problem is I bought a "Veripart 3-in-1 Converter HTC ExtUSB" so I can charge the PDA and listen to music using the 3,5 mm jack port.
I also have exactly the same problem, and solve it with the volume wheel. I also had this problem on my Hermes.
TomTom 'fixes'
FWIW, not sure why, but the volume wheel never solves my problem in a predictable fashion, so I've went and found the following apps that make things easier:
TomTom Menu Builder -- Change the location of where the 'Turn on sound' or any button shows up in the menu for faster access. e.g., I've placed my 'Turn on sound' button on page 1 with 'Navigate to' and 'exit application'. The menu also allows you to enable all sorts of 'hidden' menus, with the most useful being the voice preferences menu, which lets you choose how verbose the speaker is. Alternatively, if you're not up to installing the menu builder, you could download my TomTom menu (see attached). Either way, place TomTom.mnu in \TomTom\SdkRegistry.
TomTom Starter -- Make your phone volume max and turn off all notification popups before starting TomTom. Reverses volume and notification changes after exiting TomTom. Great for when you forget that your phone is on vibrate or at a low sound setting.
BTW, its not the ROM that is the problem, it most likely has to do with TomTom. I'm using 6.03, non-taster edition.
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Thanks michi123, I seem to recall reading about this in another thread. However, that's still yet another application (comm manager) and button I need to press before starting TomTom.
It's much easier for me to use the two applications I've included, as I'll need to go into the menu anyway to enter my navigation point and should I forget to turn off vibrate or crank up my volume, TomTomStarter fixes that for me...
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Hey your right, I turned, the data connection off and it's Ok now.
Thanks...
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Excellent! That works. And unless you have changed the functionality of your end button (like in the xda ROM) it is pretty quick to hold down the red end button (to close all data connections) before opening TomTom.
But it's not very effective when you're using a converged device, right?
I mean, would you turn off your phone every time you'd want to load TT, and then have to remember to turn it back on (while still inside TT)?
wisniak said:
I mean, would you turn off your phone every time you'd want to load TT, and then have to remember to turn it back on (while still inside TT)?
Click to expand...
Click to collapse
All holding down the end key does is cancel all active data connections .. it does not "turn off" the phone (unless you happen to be on a call). So yes, if you want to tun TT when you are on the phone, this solution will not work, but if you want to run TT when you are not actively speaking, holding down the end key first solves the sound problem. Then, you can still make and receive calls and, for that matter, you can still use data programs too, all with TT running.
Very useful thread, I've just updated mine and my G/Fs TyTns, we both have exactly the same ROM and RADIO, hers starts with Volume on, Mine starts with Volume off, the only real difference is that we're on different service providers, we both have MS ActiveSync running against our different corporate Exchange servers, and I have reduced my connectivity to GPRS to save battery. Will give the Tweaker app a go and see what happens. Sh
Alex. What version of tomtom are you running. I cannot get the menu file to work with my version 6.032(8351) no taster version.
Hi guys,
I just wanted to post on here cos I noticed some information that I didn’t agree with and also I have tested what others have said and it works so I thought I would say thankyou in one breath and bugger in another.
I have tested TomTom 6.031 SDK version on a HTC TyTN2, Glofiish, HP614c, HTC p3300 and a HTC Cruise and all of them start TomTom with the sound muted if they have a data connection active!
Sound is not muted at start-up if there is no data connection. This is great to know as I was baffled by it all but it also causes me a pain in that I need the data connection all the time, so I think its a mistake if TomTom themselves presume otherwise.
I have a XDA Orbit 2 on order but I am guessing it will be the same with that. I dont remember this issue with Windows Mobile 5, but it happens for sure on 6.
Also I have an issue with the 6.031 SDK and the unmute function call doesn’t appear to work!
Ho hum... so many devices with the same issue....
Ram
I have to admit I made a slight error in my statement above, I hadn’t tried it on the HTC p3300 and got the same result, it would appear that the HTC p3300 is the only device out of the many I have tried that doesn’t switch to silent when loading TomTom while a data connection is active.
I am trying to work out why this is as I am running the same software installation on all the devices.

Major!! Wifi Will Not Turn On!!

I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz

Categories

Resources