Question -- I have TomTom on my Tilt ... it installs fine, and works fine ... however each time I start it up the sound is turned off .. .and I have to touch the screen, turn on the sound twice before the change in settings "sticks" and I get the voice giving me directions.
Any thoughts how I can fix this?
Mine does the exact same thing, otherwise it works perfectly. Running XDA Live 1.1 ROM...
That is the default function. You must always activate the sound after starting.
GSLEON3 said:
That is the default function. You must always activate the sound after starting.
Click to expand...
Click to collapse
hate to tell you guys, but it's not the default. The sound is on when I fire up Tom Tom on my Tilt, I've never had any issue nor had to go into settings to turn it on before. Are you guys using a ROM other then the original one?
Default off on both my HK Kaiser & my AT&T Tilt. Don't know what to tell you.
Solution that works for me!
I have found that all I have to do is to rotate the volume wheel on the side of my Tilt and the sound gets turned on without having to go through the preferences menu. It will repeat the last direction when you do this but it doesn't bother me too much and it lets me know that the sound is enabled.
The same issues occur with the previous version 6.03
And on other PPCs as well (eg IPAQ hw6910).
But it does not happen always, so I deduce it's related to conflicts with other softwares.
And it certainly isn't a feature, as a previous poster suggested.
TT as a default always starts with sound ON.
weinson said:
Question -- I have TomTom on my Tilt ... it installs fine, and works fine ... however each time I start it up the sound is turned off .. .and I have to touch the screen, turn on the sound twice before the change in settings "sticks" and I get the voice giving me directions.
Any thoughts how I can fix this?
Click to expand...
Click to collapse
I didn't have this problem until about 30 minutes ago, I received the Carcomm Cradle I ordered for the car, installed it, tried out TomTom and now I have the same problem as you.
Are any of you using a Carcomm Cradle?
The only other thing I changed before the sound problem is I bought a "Veripart 3-in-1 Converter HTC ExtUSB" so I can charge the PDA and listen to music using the 3,5 mm jack port.
I also have exactly the same problem, and solve it with the volume wheel. I also had this problem on my Hermes.
TomTom 'fixes'
FWIW, not sure why, but the volume wheel never solves my problem in a predictable fashion, so I've went and found the following apps that make things easier:
TomTom Menu Builder -- Change the location of where the 'Turn on sound' or any button shows up in the menu for faster access. e.g., I've placed my 'Turn on sound' button on page 1 with 'Navigate to' and 'exit application'. The menu also allows you to enable all sorts of 'hidden' menus, with the most useful being the voice preferences menu, which lets you choose how verbose the speaker is. Alternatively, if you're not up to installing the menu builder, you could download my TomTom menu (see attached). Either way, place TomTom.mnu in \TomTom\SdkRegistry.
TomTom Starter -- Make your phone volume max and turn off all notification popups before starting TomTom. Reverses volume and notification changes after exiting TomTom. Great for when you forget that your phone is on vibrate or at a low sound setting.
BTW, its not the ROM that is the problem, it most likely has to do with TomTom. I'm using 6.03, non-taster edition.
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Thanks michi123, I seem to recall reading about this in another thread. However, that's still yet another application (comm manager) and button I need to press before starting TomTom.
It's much easier for me to use the two applications I've included, as I'll need to go into the menu anyway to enter my navigation point and should I forget to turn off vibrate or crank up my volume, TomTomStarter fixes that for me...
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Hey your right, I turned, the data connection off and it's Ok now.
Thanks...
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Excellent! That works. And unless you have changed the functionality of your end button (like in the xda ROM) it is pretty quick to hold down the red end button (to close all data connections) before opening TomTom.
But it's not very effective when you're using a converged device, right?
I mean, would you turn off your phone every time you'd want to load TT, and then have to remember to turn it back on (while still inside TT)?
wisniak said:
I mean, would you turn off your phone every time you'd want to load TT, and then have to remember to turn it back on (while still inside TT)?
Click to expand...
Click to collapse
All holding down the end key does is cancel all active data connections .. it does not "turn off" the phone (unless you happen to be on a call). So yes, if you want to tun TT when you are on the phone, this solution will not work, but if you want to run TT when you are not actively speaking, holding down the end key first solves the sound problem. Then, you can still make and receive calls and, for that matter, you can still use data programs too, all with TT running.
Very useful thread, I've just updated mine and my G/Fs TyTns, we both have exactly the same ROM and RADIO, hers starts with Volume on, Mine starts with Volume off, the only real difference is that we're on different service providers, we both have MS ActiveSync running against our different corporate Exchange servers, and I have reduced my connectivity to GPRS to save battery. Will give the Tweaker app a go and see what happens. Sh
Alex. What version of tomtom are you running. I cannot get the menu file to work with my version 6.032(8351) no taster version.
Hi guys,
I just wanted to post on here cos I noticed some information that I didn’t agree with and also I have tested what others have said and it works so I thought I would say thankyou in one breath and bugger in another.
I have tested TomTom 6.031 SDK version on a HTC TyTN2, Glofiish, HP614c, HTC p3300 and a HTC Cruise and all of them start TomTom with the sound muted if they have a data connection active!
Sound is not muted at start-up if there is no data connection. This is great to know as I was baffled by it all but it also causes me a pain in that I need the data connection all the time, so I think its a mistake if TomTom themselves presume otherwise.
I have a XDA Orbit 2 on order but I am guessing it will be the same with that. I dont remember this issue with Windows Mobile 5, but it happens for sure on 6.
Also I have an issue with the 6.031 SDK and the unmute function call doesn’t appear to work!
Ho hum... so many devices with the same issue....
Ram
I have to admit I made a slight error in my statement above, I hadn’t tried it on the HTC p3300 and got the same result, it would appear that the HTC p3300 is the only device out of the many I have tried that doesn’t switch to silent when loading TomTom while a data connection is active.
I am trying to work out why this is as I am running the same software installation on all the devices.
Related
I'm sorry if this has already been posted somewhere but I couldn't find anything on it. I finally got around to installing this on my MDA using it with the SonyEricsson's SBH-662 (or something like that). The original Voice Commander responds rather quickly but with the VC 1.6, I have to press that button on my BT headset 6 times just to get the voice prompt. Is anyone else experiencing this problem?
nxZEN 5500 and MS Voice 1.6
My MS V works near flawless. I hold the button for about a second and I hear the beep in my earpiece. Recognition and response greatly improved.
You DID install to the device and not you storage card, right?
Dr Puttingham said:
My MS V works near flawless. I hold the button for about a second and I hear the beep in my earpiece. Recognition and response greatly improved.
You DID install to the device and not you storage card, right?
Click to expand...
Click to collapse
I have to agree VC works very well even better than version 1.5. From what i have heard you can now install to the storage card but perhaps we are seeing the results of doing so. When I first read the title to this thread I said to myself hmmmm. I do think that this version is just a little slower than the previous one but it may just be me anyway overall I'm quite happy with the way it works and think i will most likely buy a copy for my wife's SDA she keeps asking for it.
Kirby
This is what I'm experiencing:
the MDA goes turns off (screen is off). I press the BT button on my headset to activate VC and the MDA turns on. the problem is that it doesn't get out of the My Info screen. If I get out of that screen, I'm alright.
Wordaround:
1: go to Start->Settings->Owner Information
2. proceed to Options tab.
3. Untick "Identification information" under "When the device is turned on, display:"
I guess no one has that ticked.
PS: This is also true if you have your device pswd protected. You will have to press the BT button again, after you have entered your password.
LordPhong said:
This is what I'm experiencing:
the MDA goes turns off (screen is off). I press the BT button on my headset to activate VC and the MDA turns on. the problem is that it doesn't get out of the My Info screen. If I get out of that screen, I'm alright.
Wordaround:
1: go to Start->Settings->Owner Information
2. proceed to Options tab.
3. Untick "Identification information" under "When the device is turned on, display:"
I guess no one has that ticked.
PS: This is also true if you have your device pswd protected. You will have to press the BT button again, after you have entered your password.
Click to expand...
Click to collapse
I don't want to sound harsh here, but this has to be said in the most realistic form possible...
READ THE MANUAL!!!!
But since someone else will probably ask the same question a million times i'll copy and paste the information from the manual for you...
The Voice Command Button doesn't work when the password screen is displayed - The password screen blocks the Voice Command Button to avoid other people from placing phone calls while your device is locked. To enable, uncheck the 'Password Protected' option. Note some organizations prevent this override from working due to increased corporate security measures.
Click to expand...
Click to collapse
Honestly in the future read the manual it will make you look wiser and make people like me less upset.
I did get a hold of the manual after the post and realized that check box. However, that tick does not help by pass the "My Info" screen. I still have that problem. Hence, my workaround.
LordPhong said:
I did get a hold of the manual after the post and realized that check box. However, that tick does not help by pass the "My Info" screen. I still have that problem. Hence, my workaround.
Click to expand...
Click to collapse
If your workaround fixes it then it can serve as a resource for people when the manual isn't working...
I recommended the manual simply because i had the problem when i first installed VC 1.6 and after ticking the checkbox, as mentioned in the manual, the problem was solved for me.
My specs are as follows...
T-Mobile MDA (USA)
Official T-Mobile 2.26 ROM
Plantronics Discovery 340 BT headset
I have no problems with BT and VC 1.6.... I haven't changed my owner info or my password protection. The headset wakes my phone from standby and is ready to go when i press the button on the headset.
frazell:
you're a freaking moron. I said what I said in the followup because it's supposed to help you if the program isn't doing what it's supposed to do. I don't know where you've been but this happens in the software industry. The manual says one thing and the software does something else. As a software developer, this i DO know.
Here are MY specs:
MDA
Offical Tmo's 2.26 /w radio 2.47 <-- that might be the culprit
opmap
SE HBH-662
BTW, the manual ALWAYS works (unless you have problems opening up doc files or ur doc file is corrupted). It's the freaking program that doesn't work according to what the manual says.
25 years in the world of IT/software R&D have taught me that often times the developers and the people doing the documentation sometimes don't communicate very well.
Kirby
Hello fellow Wing users. I'm willing to bet that if you're reading this you're probably a little frustrated with your phone's lack of performance. The reason why I'm starting this post is to try and gather in one central location all the improvements that we as local community would like to see happend for the Wing. The idea is for you to complete this sentence:
"The T-Mobile Wing would be a better phone if..."
I have already contacted T-Mobile's customer service and gave them my suggestions,but I thought it might be a good idea to see what other users are looking for/need. Any idea is a valid idea, and after a month I'll draft a letter and we can all send it to customer service. And if we see more things that need to be added we can send it monthly with new updates. Sound good?
So this is what we have so far:
1. [email protected]
2. Official ROM
3. non-Buggy My Favs Program
4. Screen Lock w/Button Lock even when an incoming call comes in
I really love my wing.
The T-Mobile Wing would be a better pda if it had 3G, so i don't have to buy a new phone when t-mo's 3G networks comes out.
I'd love my wing as well. The only thing I can think of that I'd love to see is UMA support for [email protected] Not really a big issue for me, as I have no signal issues at home, but that's about it.
How bout a list of all the suggestions in the first post. The main thing I'm waiting for is a release of the official rom to fall back on.
I'm having email issues. My wife and I can not get the send/receive function to work with my home email accounts (Cox Communications). I'm using the Wing and she's on the Dash, both using WM6. We didn't have this problem with WM5 so what's the deal?
This phone would be better if I could get an answer from Tech support why I'm having this problem.
Updated rom with less memory leaks.
Hotspot @ Home
That's all I can imagine for right now. Wing's a pretty all-in-one device.
For developers:
Would love TOUCHFLO to be implemented into a rom.
Rom's with freed up memory
Less customization
Faster and more stable.
suggestions
for now, I guess these will be the 2 main things
1. A small-sized rom, with all t-mobile apps as optional installs
2. An actual RUU rom file for us all upgraders...
NNagendran said:
for now, I guess these will be the 2 main things
1. A small-sized rom, with all t-mobile apps as optional installs
2. An actual RUU rom file for us all upgraders...
Click to expand...
Click to collapse
Like a T-Mobile Kitchen? That would be cool
Here here! I totally agree.
Here here! I totally agree.
Not sure if these are really T-Mobile's issues or WM6 issues or HTC issues, but ...
Alarms are Unreliable
...If I set an alarm, I can NOT be confident that it will sound. The WM6 alarms worked fine the first time I set it active. A day alter I changed the alarm time and alarm sound, and the alarm hasn't worked correctly since. I eventually installed a 3rd party alarm clock, and deactivated the WM6 alarms. The 3rd party one worked OK for a week, then it wouldn't work either! It only seems to work when the phone is On, and set to stay on (plugged in). If the phone goes into suspend mode over night, the alarm doesn't seem to play the alarm sound. It does wake up the device, and does flash the light, but no sound!
Volume Up/Down Buttons:
...Seems like the hardware volume buttons (which are my first choice for volume control) do not adjust volume for most 3rd party applications. In fact every 3rd party app that I've installed starts with sound blaring, and no WM6 volume control seems to control the volume. Only after entering the game, going to the game settings, and editing the game volume controls (if there are any!) can I change the volume. Why doesn't the hardware volume control actually control the speaker volume?
Listen to Music & Vibrate Mode:
...Seems like I can't set my phone to vibrate (through the quick ring/vibrate phone mode switching tool) and have volume for my music. When I set it to vibrate, the volume is set to 0. When I trun the volume up for my music, the ringer switches from vibrate to ring.
NOTE: I really wonder if all these sound issues are related ... ? It seems to me that there are a variety of volume settings, and a variety of controls to adjust these volume settings. Ringer volume, in call volume, speaker volume. , mute/vibrate mode. There is the hardware button, there is a software volume slider, many apps have an additional volume sliders. It seems like some *other* internal volume setting is getting adjusted (other than the main volume controls) and all programs (not the phone or ringer) are affected by this.
Locked Screen with Call:
...With the screen lock enabled, and the phone in suspended mode, an incoming call wakes up the phone and activates the two phone buttons. Every time the incoming call is answered as I am pulling the phone from the phone case ... !! This really sucks because I don't want to have to answer every call. If I don't remove the phone from the case, the calls are still answered just by the pressure of the case on those buttons.
Music Player Library:
...The Windows Media player Library automatically loads up all sorts of ringtones and WM6 sound files (that are not in My Music or My Videos folders)?? There is seemingly no settings to prevent this? manually removing them asks you to really delete the file (dangerous), and has to be repeated every time you reload the Library? I ended up using a new media player that has more settings and isn't so stupid.
User Modes: (not an issue, but a desired feature)
...I have found the need for 'usage modes' for the phone. I mean things like 'phone mode', 'internet mode', 'music/movie player mode'. Somethng that would enable the appropriate device settings to facilitate using some program without the screen turning off, or auto-suspending.
...I know you can manually go through all your settings and enable/disable the auto-suspend, change the backlight, change the volume/ring type, etc. in order to use the Wing as an MP3 player, phone, or news reader ... but different usage modes would seemingly be a *must have* for anyone who really uses these different functionalities one after the next.
... for example, as an MP3 player I want the device to stay on (no auto-suspend), the back light off after 30 sec, and vibrate only ringer, and music volume adjustable (only makes sense). BUT if I get an incoming call, I don't want the backlight shutting off after 30 seconds anymore! OR if I close the MP3 player and want to read my email or RSS news feeds, then I want the ringer back on, the device to auto-suspend after 5 minutes, and the backlight to stay on that long too.
...It is time consuming to be constantly swapping settings back and forth, trying to remember what needs to be changed. I feel like I spend more time tinkering with settings then actually getting good use out of the Wing. Sometimes I only have 5 minutes to read news or play a quick Sudoku game, and don't want half that time wasted futzing with settings.
...Maybe there is 3rd party software for this, but I haven't found any as of yet.
Business Contact Manager Pocket PC / Contacts Button on TMobile Wing
Thanks for this thread. I think we should also post replies when members post questions about their needs....
I like my Wing and I am trying to keep it clean - minimal software. Having said that there are some things I would like to remove / change....
I have installed business contact manager pocket pc - which sync's with my business contacts in Outlook. The problem I have is that one of the Today screen soft button (just above the ok button) points to "contacts" and not business contacts. I am wondering if anybody knows how to get this button to point to the business contacts. I do not want to install new software - I think this is a registry edit type fix. Any help will be appreciated.
I would also like to see a new forum category for all posts regarding Wing and/or WM6 professional. A lot of the threads deal with older OS's and I am concerned to install software written for WM5 and older. Also you find WM6 posts buried under different devices, etc...
This is the only way I know how . . .
zerodiscount said:
I am wondering if anybody knows how to get this button to point to the business contacts. I do not want to install new software - I think this is a registry edit type fix. Any help will be appreciated.
Click to expand...
Click to collapse
See attatched and it's the 'official' T-Mobile applet so . . . . .
Don't hold your breath for T-mobile 3G . They only have a little bit in Manhattan (apparently) and they were saying early this year that it would be rolled out in August and 1 week away and nothing so far
aLdaRiS said:
I really love my wing.
The T-Mobile Wing would be a better pda if it had 3G, so i don't have to buy a new phone when t-mo's 3G networks comes out.
Click to expand...
Click to collapse
RUU updater
T-Mobile Wing would be a better phone if they released the RUU updater with the stock version of the ROM that comes on the Wing!!
When do they plan on doing that?
I'd mainly like to see a faster CPU (preferably keeping the dual core, so the radio stuff is independant) and more onboard RAM/ROM space.
Then, there is the feature T-Mobile announced recently -- a special box that goes onto people's home LANs, where people can make voice over IP calls, and have it automatically handoff to and from the cellular network. Calls made on the wireless at home are free, even if the call gets handed to the cell network.
Of course, I'd like to see a RUU ROM file, as well as a "bare/clean" ROM from TMO, providing pretty much WM6, and the basic T-Mobile network customizations, as a starting base to work from.
How about having the extra storage space built in to the phone instead of having to buy an sd card?
How about [email protected] for the Wing?
Now here's a GREAT Idea! Hotspot @home for the Wing - god knows it'd take little to no-effort for them to allow/enable us to utilize this . . . . .
My wife switched over to T-Mobile cuz she wanted the Sidekick (bleh) so she offered to get me the Wing...I really didn't like how slow and sloppy the phone's interface is. Still don't like how slow it is but I've warmed up to the phone since it's so handy. But I do wish that the apps where not so buggy and was more customizalbe. Like customizing the homepage to have using only icons for certain things or framing some parts of the homepage so that you can view different info without having to leave the homepage and watch my phone akwardly blink to the next screen.
pickpocket said:
I'm having email issues. My wife and I can not get the send/receive function to work with my home email accounts (Cox Communications). I'm using the Wing and she's on the Dash, both using WM6. We didn't have this problem with WM5 so what's the deal?
This phone would be better if I could get an answer from Tech support why I'm having this problem.
Click to expand...
Click to collapse
That is an issue with Cox. Recently alot of ISP's have locked their outgoing email to be only able to send from approved IPs. T-Mobile right now is working on getting added to those. Dont worry about it being 6.0, that was just a coincidence.
and
Don't hold your breath for T-mobile 3G . They only have a little bit in Manhattan (apparently) and they were saying early this year that it would be rolled out in August and 1 week away and nothing so far
Click to expand...
Click to collapse
The ITCs ban on 3g chips is probably the real culprit behind the 3g launch delay. Why launch 3g when you cant even get any 3g phones imported??
!st letter going out on Friday
Hey everyone, I just wanted you to know that out first letter is going out on Friday. If you have any other ideas please add them.
SIP please . . .
how about giving us the built-in ability to use SIP/VoIP that WM6 provides . . BACK to us . . .
I know there have been several posts about the GPS, and various tools for them but it seems that some people have problems either getting the GPS to start, or in my case getting it to stop. I've tried Google maps, Windows Live, Pocket Streets, and the Dell Navigator GPS Software (I'm a former Axim owner and had it still around).
the gps works, or atleast its worked once. it seems the various programs all have the same issue, they can start the GPS but not interface with it, and cant stop it when they're done leaving it to chew on the CPU. When the GPS program is no longer running and the GPS is still apparently going (flashing amber light next to speaker) the phone's performance drastically decreases.
I've not messed with the external GPS setting and have the GPSinit (which also starts but doesnt seem to close the connection)
any ideas?
Are you sure you are closing the apps properly after you have finished or are they in the background?
I've been running the stock AT&T Tilt rom, and with the task manager set to 'end programs by tapping "X" '
the task manager, and the wm6 memory program show no applications running (sometimes Activesync stays active) but i can see acticity on the Amber light.
a soft-reset 'fixes' it but i dont know why it stays open. the Dell program is the worst by far, but all of them seem to do it.
well, installing a new GPS software on top of the Tilt's software is what caused the issue.
anyone have a suggestion on how to repair what i think is an over-written file? not much to go on other than it was Dell GPS navigator software designed for WM 2003 and no software will recognize the installed GPS after.
GPS Test worked before, doens't work after. verified its settings didnt change
Uninstalled Dell but didnt reset with a soft-reset. I can do a hard-reset if needed, but i'd prefer to stitch it back together instead.
I would be very surprised if you could fix it without a hard reset. Unless you know the dll's etc that dell changed and the registry changes it made...
Good luck.
Botanicus said:
I know there have been several posts about the GPS, and various tools for them but it seems that some people have problems either getting the GPS to start, or in my case getting it to stop. I've tried Google maps, Windows Live, Pocket Streets, and the Dell Navigator GPS Software (I'm a former Axim owner and had it still around).
the gps works, or atleast its worked once. it seems the various programs all have the same issue, they can start the GPS but not interface with it, and cant stop it when they're done leaving it to chew on the CPU. When the GPS program is no longer running and the GPS is still apparently going (flashing amber light next to speaker) the phone's performance drastically decreases.
I've not messed with the external GPS setting and have the GPSinit (which also starts but doesnt seem to close the connection)
any ideas?
Click to expand...
Click to collapse
There are some GPS apps that are not good at closing GPS. Tomtom does but I notice some others don't. If you open sherpa's app and then use it's exit button hopefully it'll close it:
http://forum.xda-developers.com/showpost.php?p=1586889&postcount=1
Mike
looking through the windows folder and system folders i couldn't pick out anything that had been changed to a pre-2005 file (age of the software) but that doesn't mean it didnt hit the registry as you pointed out. I'll do a hard reset/selective restore while at work and see if that helps.
Once i get it running though i'm going to try to leech my windows directory and do a registry backup if i can.
How are you able to tell the GPS is still "ON" ?
DLD
RacerX10 said:
How are you able to tell the GPS is still "ON" ?
DLD
Click to expand...
Click to collapse
The amber light continues to flash
Mike
the amber light to the right of the speaker stays flashing, and the com port shows as in use (com4) not allowing other GPS software to connect to it in this instance.
Botanicus said:
the amber light to the right of the speaker stays flashing, and the com port shows as in use (com4) not allowing other GPS software to connect to it in this instance.
Click to expand...
Click to collapse
For the record, I have the same problem. In order to identify the problem it might help if I list the GPS-related programs I installed:
- Google Maps (never used yet)
- TomTom 6.03 (used, not problems)
- LocationSMS (never used yet)
- VisualGPSce (used couple of times; worked, but not sure if it caused prolems)
- Holux GPSViewer (used when I already had the problem described)
So it could be LocationSMS or VisualGPCce? What did you install?
Cheers,
Edward
If you are like me there are many times when you launch TomTom but you do not have any sound because your phone was on vibrate when it was launched or the volume on your phone was set too low to hear the voices. Well after some searching I came across this program on an Axim forum that will automatically turn your volume up when you launch TomTom and will turn it back to its original level when you quit TomTom. This works perfectly on my Kaiser.
Since we have internal GPS you will probably want to disable the bluetooth option in the configuration file.
You can find the thread here:
http://aximsite.com/boards/gps-talk/140969-tomtom-6-volume-override-loader.html
If you do not want to register I also attached the same file.
Wow, this is deadly intersting, thanks for your share I ll have a closer look into it
This is big news for me -- I always run my Tilt in vibration mode and I've given up with all the fuss of turning on the sound with TomTom anymore.
When TomTom is launched via the loader, I still get the 'No Sound' icon in the lower left hand corner of the map area. However, When I increase the volume (via slider wheel) the sound does indeed come on.
Not perfect, but a hell of a lot better than before!
If the DATA CONNECTION is active, you will get that issue.
So, check your DATA CONNECTION before turning on TomTom.
You dont need that prog.
gogol said:
If the DATA CONNECTION is active, you will get that issue.
So, check your DATA CONNECTION before turning on TomTom.
You dont need that prog.
Click to expand...
Click to collapse
I just tested this and you are right. That is a strange bug but it is good to know, however I use direct push so my data connection is always active so this program is still very helpful for me. For me the whole point is to just launch Tom Tom and be good to go. Disabling my data connection each time would be a hassle.
First off I'm using "Dutty's WM6.1 Hybrid UC" 3/29/08 ROM release and I have the device connected to AT&T. I've been using it for a few days and am seeing few annoying occurrences which I'm sure can be fixed, but I'm unsure how to do it.
Here is my current list of issues that I'm seeing:
1. While making a call the screen blanks out, which is fine, but how to I get it to re-enable to say dial a key (when prompted), I seem very good at hanging up when I attempt to do this.
2. FTouchFlo, even when I using the config program and uncheck the "Auto start" box and reset, it still starts up. Is this a bug?
3. Voice Command, I know its installed and I can see it in settings, but what I want to use it for is simple voice dialing, and contact lookup, without having to connect a headset.
4. Playing games, I've noticed that many games either lockup or are unresponsive to the stylist, is this a WM6.1 issue or something else?
Thanks,
ERIC
egandt said:
First off I'm using "Dutty's WM6.1 Hybrid UC" 3/29/08 ROM release and I have the device connected to AT&T. I've been using it for a few days and am seeing few annoying occurrences which I'm sure can be fixed, but I'm unsure how to do it.
Here is my current list of issues that I'm seeing:
1. While making a call the screen blanks out, which is fine, but how to I get it to re-enable to say dial a key (when prompted), I seem very good at hanging up when I attempt to do this.
2. FTouchFlo, even when I using the config program and uncheck the "Auto start" box and reset, it still starts up. Is this a bug?
3. Voice Command, I know its installed and I can see it in settings, but what I want to use it for is simple voice dialing, and contact lookup, without having to connect a headset.
4. Playing games, I've noticed that many games either lockup or are unresponsive to the stylist, is this a WM6.1 issue or something else?
Thanks,
ERIC
Click to expand...
Click to collapse
Eric, how else do you turn the screen on when it blacks out?
did you go into touchflo and uncheck enable?
I speak right into my phone
which games?. I have several that run great.
kaisertweak or schaps adv config works for preventing sleep mode