Is any voice dialing software compatible with BT headset (press button on a headset -> speak number -> call) available? I have to start VoiceDial programm manually
Qtek 2020i.
Hi! I have Qtek 2020i and NOKIA HDW2. I am looking for the same software. Something to make voice calls with BT headset. Did you find anything? Maybe there is some program like buttonMAX, which can map bluetooth button to make a voice call or start Voice2Go or VoiceDial to recognize voice command.
Sorry. I've found any suitable software for this yet. Still looking.
hi i have problem with call and bt headset
same problem , i press button but no incoming call from bt headset
bt is motorola s500
Somebody Can Find the Software??
i need it ,too.
Related
Is there any way to get button on bluetooth headset to start voice dial? If I press it once- it toggles mic and sound from PDA to/from Headset (should be voice dial), but when I press it for a second- I get last number redial (as it should be).
I can't find any information about doing it for Widcomm bluetooth stack.
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
zard said:
Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.
Click to expand...
Click to collapse
i am using 1.6
When i prees my Headset's button, Voice recognition turns on but my voice command is heard by the phone and not through the headset. Maybe this is how it was supposed to work? Seems that actually working through the headset would be to much of a convenience.
i actually tried to make it work, but until now I havent managed to dial via BT handsfree.
i am now using Cyberon, which does the same thing i.e. u press BT handsfree button, it activates the voice command, and you have to talk to the Phone.
I also make a VoiceDial softkey button...
I guess I have to be happy with this, since nothing else works.
MVC 1.6
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
wizard327 said:
MVC Ver 1.6 is working well with my PDA2K upgraded to Helmi's 2.6. I have I-Tech Clip S headset and I can hear MVC in my headset. Also streams music to my headset.
Click to expand...
Click to collapse
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
zard said:
What are the profiles you have for the I-Tech Clip S headset?
Is I-Tech Clip S headset with BT 2.0?
When you receive an incoming call, does the audio comes in from the headset or the ppc?
When you speak, does the audio goes into ppc mic or headset mic?
Thanks.
Click to expand...
Click to collapse
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
wizard327 said:
My PDA2K recognizes my I-tech Clip S as wireless stereo and Handsfree. When I receive an incoming call, MVC announces the call through my headset but sometimes, announcement is through the phone ( mostly through the headset). When I speak, audio goes to the headset mic. I'm not sure if my bluetooth stereo headset is BT2. Hope this helps
Click to expand...
Click to collapse
I just bought the I-tech Clip Radio. It too was recognised by my IIs with Xplode's AKU 3.5 rom as wireless stereo and Handsfree. On the other hand, MVC doesn't annoucee incoming call to my headset at all. My voice too does not go through the headset mic. Very sad!
Can't see your signature but I think you are using O2 Atom. Does it come with Microsoft bluetooth stack or Broadcomm bluetooth stack?
Can you check for me if this dll file is present in your Atom. Do you have Task Manager by DotFred ( http://buzzdev.net/component/option...option=com_content&task=view&id=86&Itemid=1)? If yes, please run it and go to Devices, and check if the following is Loaded or Unloaded?
$device\WAV8(WAV8 => Reg Key is Drivers\BuiltIn\BtA2dpSnd
Mine is not loaded and even if I try to load it, it won't load. When I try to look for the file in \Windows, there wasn't such a file. If you have this file, can you upload for me? BTW, what is the Rom that you are using, i.e. which AKU? You can find out this information from settings, system, about. Mine is AKU 3.5, and it reads as OS5.1.195 (Build 15698.3.5.0).
Next, can you check the build for MS VC? Mine reads as v1.60.4622
Thanks.
Curious if it works properly now with voice commands initiated and received over bluetooth plus incomming call announcements over bluetooth.
thanks
mpovolo said:
Curious if it works properly now with voice commands initiated and received over bluetooth plus incomming call announcements over bluetooth.
thanks
Click to expand...
Click to collapse
not really working for me, once I push the BT button - it ask for the command but the the BT disconnects ...
Works fine for me on my JX-10.
My Jabra BT8010 works well so far with voice command.
FYI; The default mode on the BT8010 is "music mode" This means if you push the large center BT8010 button into your head, it is the pause/play button for Media Player. Here's what you do.......
You have to press the (mode) button at the tip of the BT8010 once to turn off music mode. *icon will change on LCD screen) Now when you press the large center BT8010 button into your head, you'll then hear the voice command boobeep and it works great!
Turn on BT durring a call?
BT question:
Are we supposed to be able to activate our bluetooth headset durring a phone call already in progress? (you want to switch your headset on, in the midde of phone call) I was able to do this just fine on my iPAQ 6900. I noticed that if I activate bluetooth durring a phone call, the system/phone audio will not transfer to the bt headset unless I hang up the current phone call first. The system icon will show it's connected though! I then have to hang upt and call them back and my headset works as it should. This also happened on my 750 via WM5, but I was hoping the new 750 WM6 would fix this. (just updated)
Is this the same behavior for everyone else or is it somethign to do with my BT8010?
I can transfer calls to my Motorola H700 just fine, but I heard the BT8010 dont work quite right with WM. I was actually interested in getting the BT8010's pretty soon - how well does it work? Is the call transfering during a call problem the only thing you've encountered? I've heard it takes away your ringtone(only rings in the headset - not from the phone) can you turn a2dp on/off with ease?
I can turn on my bluetooth (Aliph Jawbone) during the middle of a call and it will transfer the call to the headset.
I can also use VoiceCommand over the bluetooth headset.
singhnx said:
I can turn on my bluetooth (Aliph Jawbone) during the middle of a call and it will transfer the call to the headset.
I can also use VoiceCommand over the bluetooth headset.
Click to expand...
Click to collapse
my jawbone will initiate voice command over bluetooth, but as soon as I hear the beep of voice command it disconnects...
at&t orange 750
wm6 leaked rom
hiwayfuzz said:
my jawbone will initiate voice command over bluetooth, but as soon as I hear the beep of voice command it disconnects...
at&t orange 750
wm6 leaked rom
Click to expand...
Click to collapse
same for me with motorola BT (HS500).
Strange. Mine allows me to say the command ... just tried it and dialed out to my brother.
I figured it out, I need to hit the action button my jabra before the audio is transfered over to the headset. (durring an already active phone call with bt turned on later/in the middle of it) This makes sense, since it allows you to control when the audio switches over in case you're not ready. In the past it was automatic. I remember a few times not having my headset on so it's better this way anyway. Everything works great.
Well VC is halfway working for me so far with my MotoHS850... I can make calls by speaking the name and then it dials fine. But VC is not announcing the Caller via BT, although I have that selected under VC settings.
I am also getting this odd behavior I described in detail here: http://discussion.treocentral.com/showthread.php?t=149924
I cant even get it to work without a BT headset... think it is my accent though.
For me, everything works fine so far using a Jabra BT5020 except for one thing. When I activate VC via the headset I get the prompt over bluetooth but then silence. The prompt then repeats over the handset, and it is only then that I am able to initiate a voice command. If I try to do it at the first prompt over the headset, the command won't make it to the phone. The commands are also not repeating over the headset. Anyone else experiencing this?
Jawbone, HTC/Cingular Tilt Voice Commander not working for me...
I too am having difficulties to get the Jawbone to activate Voice Commander v1.60.4622.0. It will start to open the phone connection but then that's it.
Also MS Voice Command is suppose to do more like open apps.; calendar, contacts, etc... nothing happens.
I know MSVC works, when I hit the activation button I set (which happens to be the Windows Start menu) it then will do the typical VC beep and then allow me to speak my command.
I'm thinking it's more a Jawbone thing. I did have it working on my 8525 but I killed that thing.
BT and VC work fine for me using Jawbone. You need to look at the help file on the Palm relating to the VC proper usage as it did not really work for me until I did some reading. There are very specific words you must use to get it to work i.e. Open Contacts FAILS but Show Contacts succeeds. Then Show "conatct name" will show you the person you are looking for. As far as initiating a call via BT headset, I press the Jawbone side button this gives me a tone then a pause then another tone then you speak your instructions i.e. Call John Smith, there will be a pause while the app looks for John Smith, then it will repeat the name to you and ask if you want to call John Smith at Home, Work, or mobile depending on what you have saved for that particular contact. I have noticed it isn't perfect. If you have a contact with a phonetically difficult name it would be wise to change the contact name to Bob B instead of Bettencourt as at times the VC doesn't understand the name spoken. Overall it works pretty good, much better than my old Razr and there is no setup involved just say the name and go.
Hi,
I'm unable to perform commands through my bluetooth headset. Paring is successful, i can have conversations with the bluetooth activated. But i can't redial the last number, nor do a voice speed dial. I have the Kaiser SFR branded ( v1615 )
I have the latest Cyberon installed. Anyway i don't think the redialing has anything to do vith cyberon or voice command.
I have a bluetrek G3 headset, and i also tried a nokia hs11 headset i borrowed from a colleague. i still the same problem, so the problem doesn't come from the headset.
Help anyone, please !
Thanks
T-mobile MDA Compact IV.
SwiftBL WWE 16mb v6.5
I have an 'iqua' fairly cheap bog standard bluetooth headset.
When I make a call with the headset connected it works fine. When I recieve a call, the ringing comes through the headset, but when I answer the call its coming through the speaker on the phone and not the headset. I have to hit options then hands free to get it working.
Very annoying when I'm driving because Tom Tom flashes back up before I even get the chance to enable the hands free...
Tried panosha's rom as well, same thing happens..
Anyone know an app or registry edit which will solve this problem?
Thanks in advance!
Bump. Should I just buy a different bluetooth ear piece?
beauchampy said:
Bump. Should I just buy a different bluetooth ear piece?
Click to expand...
Click to collapse
I think yes. I have a Motorola bluetooth handsfree and it doesn't have this issue.
I have the same issue with my Jabra headset, a solution would be nice.
I'm having the same problem with a Sony headset.
You synchronize the headset and suspend the device. Once an incoming call arrives, the device wakes up, the headset rings (so it's working) but once you accept the call, it won't transmit the sound using the headset, you need to do it manually.
this sounds like a configuration/software problem, anyone has ideas, Please ?
with my jabra BT125 headset, if i press "answer call" on the phone, I'd have to go through menu and select handsfree. If I answer the call by pressing the button on my headset, then it routes to the headset. Have you try answering the call by pressing whichever button on your headset?
lude219 said:
with my jabra BT125 headset, if i press "answer call" on the phone, I'd have to go through menu and select handsfree. If I answer the call by pressing the button on my headset, then it routes to the headset. Have you try answering the call by pressing whichever button on your headset?
Click to expand...
Click to collapse
Yes i press the hardware button on my headset to answer it (which works). But it still doesn't enable the handsfree. Could this be related to the cyberon voice command ?