Database Develop

Still haven't found what I am looking for.... (Bluetooth/ActiveSync)

This is quite a common problem, from what I have gathered reading from the web, but haven't found a solution yet.
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth.
What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Please to help... anyone???

i spent a day trying to connect to activesync using bluetooth, when i finaly manage to do this and disconnect it , next time i spent another couple hours trying to connect it again as it was before ). and i think i realize all specifics of that procedure. ur main goal is to recognise computer paired device as device connected via activesync service and not the "serial port" service on ur PDA.

That I know...
Thanks, for that, but that I know, problem is how to make the PDA realise that my system has Active Synch and not Serial port! Have you managed to find that out? If you have then please let me know. Thanks in advance.

It actually depends on what Bluetooth stack yr LapTop has, Broadcom,BlueSoliel, Toshiba or MS..U need to add a virtual Serial Port..set that serial port in yr Async connections on yr LapTop..then re-do the BT search on yr PDA and now it will show Async service in yr device..

yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.

Using MS Bluetooth software.
I am using the Microsoft Bluetooth software and there is only incoming and outgoing. Kept refreshing but only shows 'Serial Port'!

__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
You are an absolute genius. I would never have thought about the "refresh" on the PDA bluetooth settings. It worked. I had given up previously so many times!!!
Eric

__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
I tried this port with com5 and com9 instead because 6 and 7 were taken (by what??). But unfortunately it didn't work, kept showing "Serial port" even after many refreshes.

What a nuisance
I had a similar problem. One of the reasons I bought the MDA was to sync wirelessly, and I never got this to reliably work, and wound up using a USB cable. The problem is that if it doesn't work without doing something, it is more trouble than the cable. Here are my notes about making bluetooth work:
A workaround is (i) on the MDA, go into bluetooth settings, open the PC listing and uncheck and then recheck the ActiveSync service, and (ii) shut down ActiveSync and restart it on the PC, using ActiveSyncToggle (Google for it). This program also solves the problem that activesync would start and then report that it couldn't find the bluetooth dongle for the idiotic reason that ActiveSync started before the bluetooth dongle was started. ActiveSync doesn't have an Exit/close button, and ActiveSyncToggle provides it.

Bluetooth&ActiveSync
kull said:
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth. What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Click to expand...
Click to collapse
It's rather simple. Once you pair PDA & PC with ActiveSync, you got a connection - PDA with PC (ActiveSync) via USB. This you can see in ActiveSync -> Connection Settings - checked box near "Allow USB Connections".
And if you'll pair your PDA with PC by Bluetooth (I have BlueSoleil installed), you'll have a Com port (#7 in my case) applied to your PDA - not in PDA, in PC - so you must sign this port in ActiveSync -> Connection Settings -> check box "Allow connection to one of the followings:", choose right port from the list (#7 in my case), tap "OK" (but not "Connect"!!!) - and then try to refresh BT connection on your PDA - you'll see pretty soon - "connection type - ActiveSync". Then choose "connect via BlueTooth" from your PDA - Voila! Yuo're synchronising via BT!
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
So thats all. Have fun!

Right
rusigor said:
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
Click to expand...
Click to collapse
That is probably the problem for me, I sync with two PCs, so when I got one working, trying to sync with the other would bollix up the first's settings.

I have no experience synchronising with 2 PC's. Suppose, you'll have to pair with both PC's and watch right connection settings every time - is particular PC switched to synchronise by USB or by BT - before trying to synchronise!!!!
Else you'll be forced to delete all synx. settings from you PDA (AS page) every time (IMHO)... and pairing you devices from beginning...

Solution found at last!
This was the solution to MY problem:
Originally Posted by miguelromerom
Found a possible "solution" for some people who have been having problems estabishing a BT AS Partnership with their Universal and a host computer running AS. What I found was you may need to edit the registry to fix the problem. Here's what happened to me yesterday:
Morning: Hard reseted my device and installed all my software apps at my work computer via AS in USB mode as a Guest. Note: I have not set up a partnership with any computer (either USB or BT).
Evening: Got in my truck and paired my JasJar to my BT GPS receiver via a BT Serial Port. Used TomTom and navigated home.
Late Evening: Got home. I wanted to set up a BT AS Partnership first so I went through the procedures of pairing my device and my home computer. And guess what, it didn't work. My JasJar would not see that AS was an available option on my home computer (NOTE: Before Hard Resetting my device in the morning, I had previously established a BT AS Partnership with my JasJar so I know my machine supported that profile). What the @?#~! Ok. I did a search of the word "sync" through the registery. Came up with an interesting issue. Under the registry entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
In that directory I saw a folder listed as: 000a3a051d0f (This folder is specific to my device (more below)). I was wondering what this was since I did not have any BT ActiveSync Profiles set up yet. When I looked in it, I realized immediately that this is the Device Profile for my GPS RECEIVER!!!! What the hell was it doing in this directory I asked myself. So I deleted the folder 000a3a051d0f from the directory:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
And guess what? I was able to establish a partnership via BT immediately!!!
Hope this helps anyone else facing similar situation... I guess when I sent something via a Nokia phone it created a key which kept recognising my laptop as having only serial port. Once deleted - pronto my laptop showed up saying it had Active Synch!

Bluetooth Activesync problem....

I don't see the word "activesync" on the services list on my device, I only see "serial port" what could be wrong? I tried re-connecting again and again, made an incoming connection on the comport and assigned the comport number in Activesync and still it won't work. The last time I did these procedures, everything seems working fine. What could be wrong?

Any solution? Bump.
I did read the thread here ( http://forum.xda-developers.com/showthread.php?t=331394 ) and tried everything there but just can not get the Activesync service to show up on my Tilt. Funny thing is it was working before I tried to get Bluetooth PAN working.
By the way, AT&T branded device, Toshiba BT stack on Win XP SP2.\
FINALLY SOLVED:
-In control panels Bluetooth Local COM
-Removed COM6
-Added COM6 as Bluetooth virtual COM port for a SERVER
Then finally Activesync service showed up and all was a breeze from there.

jtphl said:
I don't see the word "activesync" on the services list on my device, I only see "serial port" what could be wrong? I tried re-connecting again and again, made an incoming connection on the comport and assigned the comport number in Activesync and still it won't work. The last time I did these procedures, everything seems working fine. What could be wrong?
Click to expand...
Click to collapse
had the same problem. hee is, what worked for me: delete all pairing from device and PC. connect to pc with USB and install the Kaiser as modem. in active sync - connections - select the right USB serial port. after this it worked for me

tried both solutions above , but cant get the activesync service on my device :S
FINALLY SOLVED:
-In control panels Bluetooth Local COM
-Removed COM6
-Added COM6 as Bluetooth virtual COM port for a SERVER
Can you explain this? Are those settins on the device? or pc?
thnx

yeah, a little more details would be nice. I can see the Bluetooth Local COM in the device manager but how do i install the virtual one?

problem solved here
- reinstalled activesync!!!!!
- added bluetooth paired device on ppc with my laptop
- in bluetooth settings on the laptop i added an incoming port , laptop added port 11 automaticly
- in active sync in connection settings, i said , use port 11 for incoming connections
- on pda i refreshed the services of the paired laptop , serial port service became activesync service!!
problem solved for me

If people are still having the problem (as I was using a Widcomm based BT adapter) you should go check out the registry entry at \HKLM\Software\Microsoft\Bluetooth\ActiveSync. If you've deleted all the pairings and you still see a folder in there with some numbers, open it up and check the value of RasEntry. If it says the name of any device that you've paired your phone with, go back out to the ActiveSync folder (one level up) and delete that folder. Then re-pair and set up the serial port on your local computer to be the same as the one that ActiveSync (on your desktop) allows connections from in the Connection Settings preferences.

Bellfazar said:
If people are still having the problem (as I was using a Widcomm based BT adapter) you should go check out the registry entry at \HKLM\Software\Microsoft\Bluetooth\ActiveSync. If you've deleted all the pairings and you still see a folder in there with some numbers, open it up and check the value of RasEntry. If it says the name of any device that you've paired your phone with, go back out to the ActiveSync folder (one level up) and delete that folder. Then re-pair and set up the serial port on your local computer to be the same as the one that ActiveSync (on your desktop) allows connections from in the Connection Settings preferences.
Click to expand...
Click to collapse
Tried that, but that didn't help. I have a Anycom USB-200 Widcomm based bluetooth dongle and a O2 XDA Neo (aka HTC Prophet) with Prophet Touch IX WM6 installed and I'm using Active Sync 4.5. It worked for me with WM5 before a while ago. I don't remember what I did differently that time.

The Bluetooth and Windows Mobile Device Center Dilemma

Hey everyone!!
Did anyone manage to connect his HTC Wings via Bluetooth to the PC and Sync it with WMDC?
It works with cable but not Bluetooth (BL).
I appreciate comments.
Thanks

A.Bagatov said:
Did anyone manage to connect his HTC Wings via Bluetooth to the PC and Sync it with WMDC?
Click to expand...
Click to collapse
It worked pretty easy on my S730. Make sure you enable BT on the phone and your computer. Pair the PC with the S730 and start ActiveSync on your mobile. Select the option 'Connect via Bluetooth' and that was it (for me).

you seem to be using activesync, however i use windows mobile device center with windows vista x32... so the procedure is different and much more problematic it seems... not just with the s730 but with all wm devices

A.Bagatov said:
you seem to be using activesync, however i use windows mobile device center with windows vista x32... so the procedure is different and much more problematic it seems... not just with the s730 but with all wm devices
Click to expand...
Click to collapse
I use Windows Vista Business (32-bit) and I needed to upgrade Mobile Device Center. It works without any problems afterwards. The only disadvantage is that I need to manually connect on my phone, before it starts synchronizing. I would rather have it syncronized whenever it is near my laptop.

it doesnt work for me. bluetooth is turned on in both devices.
does anyone have any suggestions?
i have the toshiba bluetooth stack software, do you use that too??

I had the same problem. Open you WMDC and go into Mobile Device Settings and select Connection Settings. Under Allow connection to one of the following: change the selection from Bluetooth to COM7.
Then open your device and set up your bluetooth connection again. You should see Activesync now.
You are most likely using the Toshiba Bluetooth Stack instead of WIDCOMM.

IT IS NOT WORKING
AAAAAAAAAHHHHHHHHHHHHHHHHH
this is so STUPID
when i try to set up on my phone then it says "you have no partner for activeysnc, get one?"
i say YES and choose my computer
then i can select a port a one point and i CANT select 7
whats the solution!=?!

From your response I think you are trying to set the COM port on your device but you should be changing it in Windows Mobile Device Center.
I'll go step by step in case I was not clear.
1- Disconnect your Wing from your computer.
2- Open Windows Mobile Device Center
3- The only option should be "Mobile Device Settings"
4- In Mobile Device Settings you should have two option Connection Settings and End a partnership, select Connection Settings.
5- Under the second check box "Allow connection to one of the following" there is a drop-down box which should currently read "Bluetooth". In the drop-down box change that selection to COM7.
Note: If COM7 is not available, then I suggest you uninstall your Bluetooth device drivers and then reinstall them.
6- Close Windows Mobile Device Center
Now return to your device.
Delete any existing Bluetooth connections to your computer. and reestablish your Bluetooth connection. You don't need to change any COM settings on your device. Just establish your connection and you should have the Activesync option once it is reconnected.
This is under the assumption that you are running the Toshiba Bluetooth Stack on your computer. If you are and it doesn't work, I'm all out of ideas.

I should have specified that as of Step 2 above, this is all done on your computer not your smartphone, i.e. HTC Wings.
Your problem with Bluetooth is on the computer not the device, most likely.

this doesnt work... i did all the things like u told me on the computer.
then i go to my phone and try to connect from activesync via bluetooth and it says that no computer with a partnership could be found?? even though i actually made bluetooth partnership with my pc. when i added my pc to my bluetooth devices list on my HTC it told me that my pc supported 2 services: stereo audio and com port. i ticked com port... it doesnt seem to help.
on my pc, when i open the bluetooth stack software from toshiba i can see my phone has a partnership with my pc. but it has a network symbol on it.. is this supposed to be like that? ah this is so frustrating? any suggestions?

The only difference I see between your set up and mine is that I don't have a connection appearing on my computer.
So when you open your Bluetooth Settings on the computer, I don't have a saved connection with my Smartphone. The only place I see a connection between my computer and my device is on the device itself.
So my last suggestion is to delete both connections. The one on your computer and then the one on your device.
Open your device and reestablish a connection from your device to your computer. You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection.
Also, go back and make sure that in Windows Mobile Device Centre, the connection is for COM7 and has not reverted back to Bluetooth. What you described has only ever happened on my computer when the connection was not set to COM7.

Something currious happened with my device when I was reestablishing my Bluetooth connection, which may be of interest to you.
I erased my original Bluetooth connection and while reestablishing it my device was also connected to my computer with the USB cable. When I paired the device, there was no option for ActiveSync. I disconnected my device and then started the Bluetooth pairing over and this time ActiveSync was available.
Does this help?

Any of you guys who have sucessfully pairedd WDMC in Vista with S730 over bluetooth use original MS out-of-box bluetooth drivers?

I've only used the Toshiba and Widcomm Bluetooth Stacks and have been able to sync with both on Vista.

dagobert_29 said:
The only difference I see between your set up and mine is that I don't have a connection appearing on my computer.
So when you open your Bluetooth Settings on the computer, I don't have a saved connection with my Smartphone. The only place I see a connection between my computer and my device is on the device itself.
So my last suggestion is to delete both connections. The one on your computer and then the one on your device.
Open your device and reestablish a connection from your device to your computer. You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection.
Also, go back and make sure that in Windows Mobile Device Centre, the connection is for COM7 and has not reverted back to Bluetooth. What you described has only ever happened on my computer when the connection was not set to COM7.
Click to expand...
Click to collapse
there is the problem: "You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection."
because as soon as i enter the bluetooth password on my phone and computer, there appears a bluetooth connection in the manager from toshiba. this connection has a "network" symbol and the services offered are com port and stereo audio. thats not much is it? and also when i click "connect" an error comes up.. connection couldnt be established or something.
i hate this. how can be a SIMPLE task so problematic?
toshiba drivers are working fine. send and receive works. and my phone is fine too. the wmdc work fine as well via USB. i also installed the wmdc UPDATE..... wtf right?!

Hey A.Bagatov,
I'm at a complete loss to understand why you can't get WMDC to work with your phone over BT. You've done everything I've done but unlike you I was able toe stablish the connection.
The only other thing I can think of is to download the latest BT drivers from Toshiba. But before you install them, make a copy of the TosBtChk.dll file and once you've completed the installation of your new BT drivers, replace the new TosBtChk.dll with the one you saved. This will stop you from receiving the trial period notification.
If that doesn't work, then maybe replace your Toshiba BT stack with the Widcomm stack. You'll need to locate a version compatible with your computer.

i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio

A.Bagatov said:
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
Click to expand...
Click to collapse
You have to understand Widcomm is not a free replacement for your MS drivers. Its commercial and it can only be obtained with some BT hardware, not as stanalone product AFAIK. As that, it is a bit complicated to make it work with unsupported device (but quite possible). And where to get it? Generally, if you are able to pirate, you are also able to google.
However, I assume you have legal OS installed on your Sony laptop - why not to tell MS they BT drivers SUCK A BIG TIME? Go tell them its crap that does not EVEN WORK TOGETHER WITH THEIR OWN UTILITIES.
Call 1-800-MSSUCKS

A.Bagatov said:
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
Click to expand...
Click to collapse
I've also got a Sony Vaio, SZ45, and on the Notebook Review forum, there is a thread that discusses replacing the Toshiba BT stack with Widcomm, which you can get free of charge. The thread offers a modified file which should be sufficient to enable Widcommon your laptop. Here's a link to the general forum http://forum.notebookreview.com/forumdisplay.php?f=8

mpattonm said:
You have to understand Widcomm is not a free replacement for your MS drivers. Its commercial and it can only be obtained with some BT hardware, not as stanalone product AFAIK. As that, it is a bit complicated to make it work with unsupported device (but quite possible). And where to get it? Generally, if you are able to pirate, you are also able to google.
However, I assume you have legal OS installed on your Sony laptop - why not to tell MS they BT drivers SUCK A BIG TIME? Go tell them its crap that does not EVEN WORK TOGETHER WITH THEIR OWN UTILITIES.
Call 1-800-MSSUCKS
Click to expand...
Click to collapse
Microsoft are not the developers of the Widcomm Bluetooth Stack, it's owned by Broadcom. It can be obtained for free, however, you're right in saying it may not work with non-Broadcom hardware. In A.Bagatov's case, the issue is with Toshiba not Microsoft. They are the one's who developed a driver that is not always compatible with non-Toshiba products.
According to other posts I've, the Microsoft generic Bluetooth drivers would appear to work just fine with Windows Mobile devices, however, I was unable to get it working and did not pursue the matter any further once I was able to get the Toshiba BT Stack to function.
I can sympathize with your frustration, but your post does not help him solve his problem.

Bluetooth Sync- Please help

Hi all:
After hours of searching and trying, and failing, I have given in, and decided to go ahead and ask. Please be gentle, I know how much everyone hates when people ask already answered questions, but I have honestly spent hours trying to solve this problem.
I am unable to get bluetooth sync to work (Windows XP).
I kept getting too high a COM port number, and was not able to select it on ppc.
After many searches both here and Google, I was finally able to get a COM port which was low enough for my Tilt to recognize (COM port 9). I Added new device to Tilt, and FINALLY I had ActiveSync as an option.
It indicated I should select COM port 9 to sync. I have also gone into my bluetooth place on PC, and verified that it shows COM 9 as My Serial Port. I have also checked, and my PC does show up on ppc bluetooth devices. I have double checked that ppc is discoverable. I also added 9 under COM ports on phone.
However, ActiveSync on PC does not list COM port 9 as an option.
Also, when I try to add Tilt to My bluetooth places (on PC), it tells me no available COM ports on ppc.
If I go to Activesync on phone, and click connect via bluetooth, it says opening port, then connecting to host, and a pop-up on pc states that ppc is connected to blueooth serial port on PC (COM 9). After this, all activity stops, and active sync does not ever connect.
Please help me
Thanks!

You don't need to set a COM port on the PPC itself. Delete it as well as the pairing with your PC.
On the PC, check the Serial Port service is enabled in the BT settings. I'd then make sure the COM port number is between 1-8. Now where this is done depends on the BT software stack you have on the PC, it can be in the BT settings, or you might have to go in the device manager, COM ports, find the Bluetooth COM port and change its number here in the advanced properties.
Open Activesync connection settings, check the COM port tick and select the port in the dropdown. If you can't see the port here and select it it won't work, so theres no chance your current setup will work.
Then on the phone add new device, select the PC, type same passwords on both sides to create the pairing. In the next service window you should have Activesync, tick it, finish. This should now work, at least I've always done that way for years now with different PCs and PPCs. Activesync is crap though, and on some configurations I needed to kill the activesync process and relaunch it everytime before connecting or it wouldn't work, or open the connection settings, remove the COM port tick and dismiss, then open again and put it back.
Also, when you connect on the PPC, some PC bluetooth stacks will ask you everytime if you want to allow the connection, but the prompt doesn't appear unless you go manually click in the BT tray icon. That was on my last PC.
There are often small issues but I always got it to work somehow

Hi:
Thanks so much for your reply.
I deleted the COM port on phone, as you instructed.I also deleted pairing.
I wasn't able to set COM port to a lower number than 9. There was no advanced properties for the COM ports in device manager. I even enabled show hidden devices, and show non present devices. Still nothing. I have no idea what is trying up the lower numbered COM ports.
Somewhere along the line, ActiveSync started showing COM port 9 as an option. After selecting it, it now works perfectly.
I am however mad, and frustrated as I don't know which of the MANY steps I took fixed it. I wish I did, so I could post it here, and hopefully help someone else who is about to pull their hair out trying to get their Kaiser to sync via bluetooth. Not to mention if I ever have to set it up again for myself, I have no clue what got it working
Thanks again for your help!!

In the future:
Turn on bluetooth on phone/PC
Right click 'My Computer'/Manage/Device Manager
Check what COM Port your Bluetooth on PC is using
Start Active Sync/File/Connections/Allow Connections from the following (select COM here)
Hit OK then Sync.

Hi Nufsaid:
Thanks for the steps, but believe me, I had tried that dozens of times. My problem wasn't with setting up pairing or anything like that. All the COM ports assigned to bluetooth were way too high for ppc to recognize. Eventually after much effort I got the serial COM port down to COM port 9 (which the phone now was able to use, before it had been 16, 17, 18). Active Sync refused to recognize that COM port. Anyway (as I mentioned in my previous post), after hours of trying, COM port 9 magically showed up as an option in Active Sync. Sadly I am not sure which of the many steps I took fixed the issue.
Thanks anyway.

cincy1020 said:
Sadly I am not sure which of the many steps I took fixed the issue.
Thanks anyway.
Click to expand...
Click to collapse
Don't worry, the first time I tried to sync a PPC via BT I had the exact same kind of problem and never found out how I got it to work. But since then the steps above have worked well

kilrah said:
Don't worry, the first time I tried to sync a PPC via BT I had the exact same kind of problem and never found out how I got it to work. But since then the steps above have worked well
Click to expand...
Click to collapse
LOL
That is funny, but great to hear!
Thanks!

Okay, this is really becoming RIDICULOUS!
I had it syncing perfectly last night. All I did, was go to bed. Turned off bluetooth on phone, and turned off PC.
Today when I went to sync again, COM port 9 is no longer listed in ActiveSync.
And of course, it will not sync. I have tried everything to get COM post 9 to show up again, and it will not. My bluetooth serial post is still listed as COM port 9, and when I establish a connection, it connects, It just won't connect to ActiveSync. I tried deleting the pairing, and re-pairing, but now ActiveSync is not longer listed as an option on phone after pairing.
Any ideas, or suggestions would REALLY be appreciated. And believe me, I have searched, and searched, and then searched some more, I just can't fix this.
Thanks!

Install another Bluetooth stack (one that works ) on your PC? Widcomm for example

kilrah said:
Install another Bluetooth stack (one that works ) on your PC? Widcomm for example
Click to expand...
Click to collapse
Hi:
Thanks for your reply.
I actually am already using Widcomm. Is it possible Widcomm is not working well with my PC? Should I try another? Any suggestions.
Again, thanks for your help. While I am not new to PCs or PPCs, I am VERY new to bluetooth and all that jazz, lol.
Thanks
EDIT:
Actually, I should have said I have the Widcomm stack installed. I am not however sure how to verify that it is being used.

i once read that it works with BlueSoliel, not Widcomm. Try that. BlueSoliel worked for me, but not Widcomm.

I'm using Widcomm (actually the one that is bundled with my Logitech MX5000 desktop bluetooth keyboard/mouse) and it works perfectly fine. On my laptop I have a Toshiba stack and it works well too. Maybe you have an old version that is bogus? I have had trouble to get the widcomm stack to work at the beginning, Windows default crappy stack would always take the BT hardware over preventing the Widcomm stack from using it.

AthenaLod said:
i once read that it works with BlueSoliel, not Widcomm. Try that. BlueSoliel worked for me, but not Widcomm.
Click to expand...
Click to collapse
Just got a new mini dongle I'm trying to use BlueSoliel, but am having trouble, I can push to my phone, listen to music via stereo bluetooth, but can't serial. BlueSoliel gives an option in tools/configuration/quick connect to assign com ports, but the ones shown won't show on my phone as an outgoing/incoming port...have you figured this out? All I want to do is Activesync via Bluetooth.

You don't need any port to appear on the phone for sync. What matters is the COM port number on the PC. You need to know it, set activesync to use it, then do a pairing preferably from the phone, and select on the phone to use the PC's "ActiveSync" service that should appear in the list if the PC configuration is OK.
Basically there's nothing to configure on the phone. If something's wrong it's 95% chance that it's on the PC.

Bluetooth

Hi,
I just bought a Bluetooth dongle for my PC. (Trust Ultra Small Bluetooth 2.1 Usb Adapter 25 M)
The main reasons for buying this was so I could sync without using one of my very spare USB ports.
Another big reason was that I really want to try SideShow.
So, I hooked the thing up, installed it. Works like a charm for most services (files etc). It just doesn't work for two things: ActiveSync (on the phone)/Windows Device Center (on my PC) and Windows SideShow. Yay.
Could you please help me out?
To summarize:
PC with Vista Home Premium,
Trust Ultra Small Bluetooth 2.1 Usb Adapter 25 M,
HTC S730.
Not working for ActiveSync nor SideShow.
x5x_tim
PS: I installed something called "X86-PC Drivers.cab" I found in some thread. That's supposed to be the drivers for the SideShow service on the PC. (I think I installed them, I did not get an error from Rundll32...)
EDIT: what might be of use: I can't get the devices to pair if I use the PC to initiate that. The PC does not find the phone untill I pair them using to phone to initiate.

I don't know about SideShow but I managed once to ActiveSync my Wings through Bluetooth. Just be sure to remove any security restricition on your Bluetooth settings on your device. Like Secure Connection etc... Also, setup a serial port when you connect with your PC and then, at PC ActiveSync settings, at connection settings -> Allow Connections To One Of The Following (Com 4 or whatever). And then, at ActiveSync on your mobile, connect through Bluetooth. Try it and come again if it doesn't work.

Yes! Thank you. It's syncing as I type. That COM4 did the trick!

In the same way, you can have Internet on your mobile through Bluetooth's activesync connection. It is helpful if you don't have wifi on your mobile.