Database Develop

New official ROM 1.40 from Dangaard (1.40.149 1.12.00)

Site:
-------------
http://www.windowsmobile.no/modules.php?name=News&file=article&sid=161
BA_DT_WWE_NorwayRetail_14000_149_11200_Ship ROM:
http://www.windowsmobile.no/modules.php?name=Downloads&d_op=getit&lid=78

Thanks, I have uploaded the ROM to FTP:
ftp://xda:[email protected]/Bl...s/BA_DT_WWE_NorwayRetail_14000_149_11200_Ship
Enjoy!

OK, I'm sure I'm just an idiot, but I followed the instructions in the "Getting started" section, since I have the Brightpoint version of the Qtek, not the Dangaard. But I couldn't get it to work, probably because I haven't got the correct password in the editfix.bat. Can anybody help me with that?

See this thread mate...: http://forum.xda-developers.com/viewtopic.php?t=20770
Or read this thread, which will explain it also: http://forum.xda-developers.com/viewtopic.php?t=20339
And uh, have you read wiki?
See my signature for link.
Hope that helps

Yes, I did read the Wiki. Didn't understand much of it, but I did read it...
And thanks for that thread, adding the line [CHECKCEID_TYPE]=1 made it start updating!With any luck it will work. But then again with my luck... :roll: :wink:

Change the boot picture
Hello,
Updated my Qtek9090 to this version but the only complain i have is that the boot picture after a reset is UGLY. :x
They put a text in the image
www-windowsmobile-no + Qtek support number.
Is there a way to change the picture ??
I could not find anything about this ?
Does anybody have the QTEK cloud picture without the text.
Could you upload this to the FTP ?
Thx for your time

I wasn't that lucky... It just was stuck on "getting device info". Now I've got a unit that switches between showing a grey screen with USB and a grey screen with SERIAL... The annoying thing is that I remember I had that problem on one of the official upgrades, but I can't remember what I did. I probably just left it without a battery over night, though. Oh, and when I tried to restart that upgrade I saw the country ID error again. So perhaps just adding that line to the cfg wasn't what you were trying to divert my attention to in that other thread. Or was it?

Restart your computer and try the upgrade again...usually works.
And no, that was not a diversion, why should we? :shock:

I should stop using long words with serveral meanings when I don't know all the meanings myself... I ment divert in the sense that you divert traffic - showing me the way to that other thread.

ER2003Edit
Could somebody upload ER2003Edit to the blueangel >> Tool folder.
I found away to change the splashscreen :lol: but you need the ER2003Edit software to edit the *.nbf files
Thank you !!
WoooHooo almost there
>> Doesn't work for the QTEK9090 --> Again The quest begins <<

when a new for imate ?¿?
regards

Gotcha. I'm going with the one on the forum's FTP. I assume that's the same one as the official one I downloaded from the windowsmobile.no site. Maybe I can get my at the moment rather expensive paper weight back from "USB SERIAL"...

I often get the USB/SERIAL problem. Best thing to do is just kill activesync via task manager. I think wcescomm.exe is the one. Then just re-run the upgrade. Should run through, but it won't have anything in the screen that tells the to and from version info for the 'from' info.
Cheers
RTP

Aaargh! To quote a certain young mr. Brown with a rather round head and a wacky dog: "Good grief!" I thought I was rather computer litterate having spent the last 20 years around them, but any old dog can learn new tricks, it seems...
Finally the upgrade of the main rom went nicely, and also the extended ROM, it was very much a by the numbers job as soon as I understood where to look. Kitchen? Man, I know we've got something called that in my house... Oh yes, that's the mysteriuos room where my wife goes into half an hour to one hour before dinner and then emerges again with the food! :roll: :wink:
Finally the radio ROM, and I'm good, I hope. It will be interesting to test this stuff and see how it works! Thanks for the help! I feel like a dangerous hacker now, so look out, Norway!

Re: New official ROM 1.40 from Dangaard
can somebody explain me where I can download rom 1.11?

Mastiff said:
Aaargh! To quote a certain young mr. Brown with a rather round head and a wacky dog: "Good grief!" I thought I was rather computer litterate having spent the last 20 years around them, but any old dog can learn new tricks, it seems...
Finally the upgrade of the main rom went nicely, and also the extended ROM, it was very much a by the numbers job as soon as I understood where to look. Kitchen? Man, I know we've got something called that in my house... Oh yes, that's the mysteriuos room where my wife goes into half an hour to one hour before dinner and then emerges again with the food! :roll: :wink:
Finally the radio ROM, and I'm good, I hope. It will be interesting to test this stuff and see how it works! Thanks for the help! I feel like a dangerous hacker now, so look out, Norway!
Click to expand...
Click to collapse
Congratulations mate for that
May you please upload the extended rom files to the forum's FTP ?!
Thanks in advanced mate and best of luck and wishes everybody
Best Regards,

Thanks! The files are already there. Look at the thread that I'm refered to after my first message: ftp://xda:[email protected]/Uploads/Blueangel/BA_WWE_14000_147_11200_Ship_EXT_ROM_1.40.147

any one able to extract the extended rom pls post it on the ftp.
thanks
jeet

Re: ER2003Edit
Captkiwi said:
Could somebody upload ER2003Edit to the blueangel >> Tool folder.
I found away to change the splashscreen :lol: but you need the ER2003Edit software to edit the *.nbf files
Thank you !!
WoooHooo almost there
>> Doesn't work for the QTEK9090 --> Again The quest begins <<
Click to expand...
Click to collapse
The tool can be downloaded here:
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Good luck, coz I think the tool will not work on BA ROMs...

No camera
Hi everybody,
I like the new 1.40 rom but even after trying some camera fixes off the wiki, My camera stills ("failed to initialize"). Any tips from anyone would be great!! :lol:

SX66 EXT ROM Standardization Project

Hi, I've opened this thread to correspond if a new development project that has started on WIKI. The concept behind this project is to support users of the SX66 (PH20B1) available in the US. There is a good community of folks using this model, and a users group seems to be forming. Giving that this community has varied levels of the technical skills, this idea came to me as a way of further increasing the growth of the BA adoption in the US, while reducing the need of me helping folks one at a time. But I must give credit where credit is due, the knowledge I bring to this project was all gained from the hard work and dedication of users here. Work that I would be lost without.
I have posted a Beta I trial for a 1.40.121 (cooked for the SX66 WWE Cingular) EXT ROM, and have invited select users to assist in the testing. This space will be used for feedback.
Update 5/12/05 - I've posted a Beta 2 release: Check out the Dev page at the link below for deatils:
http://wiki.xda-developers.com/index.php?pagename=BA_Wiki_Dev_Test5
Thanks,
-Chris

cdaly1970 said:
Hi, I've opened this thread to correspond if a new development project that has started on WIKI. The concept behind this project is to support users of the SX66 (PH20B1) available in the US. There is a good community of folks using this model, and a users group seems to be forming. Giving that this community has varied levels of the technical skills, this idea came to me as a way of further increasing the growth of the BA adoption in the US, while reducing the need of me helping folks one at a time. But I must give credit where credit is due, the knowledge I bring to this project was all gained from the hard work and dedication of users here. Work that I would be lost without.
I have posted a Beta I trial for a 1.40.121 (cooked for the SX66 WWE Cingular) EXT ROM, and have invited select users to assist in the testing. This space will be used for feedback.
Thanks,
-Chris
Click to expand...
Click to collapse
Chris Add me to the beta
Mozzer1138

Thank you for your effort, Chris. add me too.
Do you recommend upgrading to Windows Mobile 2005? I have downloaded the SW and wanna check first.
thx

where do you download this? or are you just sending it to people?

My friend, I will post the links to the forum now.
-----------
I am not responsible if you system has any problem because of this upgrade.

the bluetooth does not work on Beta2-S1.40.00-R1.12.00.E1.40.122
I can't pair my headset

KS, even after a soft reset? I've got 1.40.122 running without incident, but the BT files haven't changed, so it should not be an issue.. It is built on the 3900 stack included in the 1.40.00 system ROM, with only an add on to put the stereo headset in.
What headset are you using?
-Chris

Here is the link to the DEV page, which includes a link to the current kit:
http://wiki.xda-developers.com/index.php?pagename=BA_Wiki_Dev_Test5
Let me also point out, as I think it may be confused in some of the earlier posts. This is an EXT ROM for System ROM 1.40.00, which is Windows Mobile 2003 SE, not 2005.
-Chris

thanks Chris. this is nice, had been wanting to upgrade my sx66 but was just too lost to cook my own ...
the cabs included sounds good and i'm going to try it tonite!
feedback once its done. thanks once again.

AlmondKing,
Looking at your flag, and provider logo, I just wanted to point out that the files contain customizations for Cingular as they are required in the US. Hope that is not a problem.
Everyone,
Found my first bug. There is a problem in the version cab. I got creative, and tried the set the version to 1.40.122 (Cooked).... Well, the getdevicedata doesn't seem to like that. It doesn't seem to create a problem when flashing, but it records the EXT rom version as blank when reflashing. I've updated the version CAB, and will have it in beta 3.
-Chris

BETA
Chris,
I did upgrade without problems and everything is working fine so far.
I will report
Jerry

the splash screens have got to know, they are worse the the stock ones, the theme is ok, but the rest looks good so far

Here is a great tweak that gives your the timer and disconnect on th grps bubble
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000010

beta
There are a number of files in WINDOWS (including CAMERA DETECT) that I tried to delete, but I got error (in use)and couldn't delete them??

Re: beta
urologyhealth said:
There are a number of files in WINDOWS (including CAMERA DETECT) that I tried to delete, but I got error (in use)and couldn't delete them??
Click to expand...
Click to collapse
Jerry, I believe the files you are trying to delete are the one that are part of the System ROM, and can't be deleted. This is why you are getting the in use error.
-Chris

wstahlhut said:
the splash screens have got to know, they are worse the the stock ones, the theme is ok, but the rest looks good so far
Click to expand...
Click to collapse
Got something better?? I'm not a graphic artist, never claimed to be. I'm more then happy to have something better.
-Chris

wstahlhut said:
Here is a great tweak that gives your the timer and disconnect on th grps bubble
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000010
Click to expand...
Click to collapse
Nice, I'll add this.

beta
Since I did the updates all is functioning fine--no issues
This board has been quiet--anything new added??

Can you add this one to it too?
Displaying Date and Time in the title bar of your PocketPC
Browse to "HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Shell \". Create a binary value named "TBOpt" and set its value to "13 00 00 00". Save any unsaved document and reset your Pocket PC.

MMS server is not set up it seems, looking for the setting so they can be added

Editing Rom

hi again..
C.Shekhar can you help me to edit the icons of your windows WM6 .... is it possible if I change the file that contains the windows icons.... ?
I think it is ended with dll extension ... Please help me.
thanx

Oweida said:
hi again..
C.Shekhar can you help me to edit the icons of your windows WM6 .... is it possible if I change the file that contains the windows icons.... ?
I think it is ended with dll extension ... Please help me.
Click to expand...
Click to collapse
If you want to ask Chandra only, why you won't use PM?...
It's shellres.96.dll, but if you know nothing about that, you won't succeed, it needs either signing or XIPing.

Oweida said:
hi again..
C.Shekhar can you help me to edit the icons of your windows WM6 .... is it possible if I change the file that contains the windows icons.... ?
I think it is ended with dll extension ... Please help me.
thanx
Click to expand...
Click to collapse
Do not reply on my threads anymore....... Rudegar.
I'm not asking you even if You are the only one to ask..
........
C. Shekhar or Ather I need your opinions.
Click to expand...
Click to collapse
Here I am oweida.
I read on one of the other thread also, you wanted to ask me many questions. I am all for you guys bro! But my knowledge also has its own limitations. So, may not be able to fully answer many of the queries. But, neverthless shall try to answer as many as I can.
On this great forum when you launch a thread there are many who have answer to those issues which you have addressed. This forum is full of genius whose knowledge level is very difficult to fathom. So pl dont mind if any other knowledgeable person tries to answer your queries. You should appriciate his efforts which he has made to extend towards you. You can always PM me whenever you like if you have anything pointed towards me specially. I hope you shall understand the system here. so going straight to your queries....
Firstly
You wanted my opinion about inserting WM6.1 features into WM2003 so that the speed of WM2003 can also be enjoyed. So, to be very precise I Wouldnot recommend that. The upgrades of OS are designed by microsoft with certain intrinsic features embeded into it and many a times the file system of the databases are also changed. So it is (in my opinion) a wasteful exercise to fiddle with that for not so very significant gains.
And according to my observations the speed of WM6.1 is not so naticeably less than WM2003 any longer and on the other hand embedded with lot many advantages & features which make me happily sacrifice the minor reduction of speed over WM2003 .
secondly
The icons of WM6.0 are more or less similar to those of WM6.1. And as explained by utak3r already, the most of the system icons are in shellres.96.dll, shellresapps.dll, shellresapps.96.dll. But, unless you know how to dump rom and cook it back, you would not be able to change the icons.
Another way is to create a separate resource dll having the icons of your choice and edit the shortcuts of the applications to show those icons. That you can easily do without any advance knowledge of cooking.
I hope i have managed to you answer your both the queries. If you still want to know anything more feel free to PM me or post your queries on the relevent thread. search button is also a very useful companion try that too.
...regards... c_shekhar

Thanx..
thanx for explaining ....
I'm gonna PM you whenever I need you.

Oweida said:
I'm gonna PM you whenever I need you.
Click to expand...
Click to collapse
Heh, I wouldn't want be you now

How to make IE default browser.

So after 40 minutes of wasting time (searching how to do it) I got nothing.
Anyone know how i can make Internet Explorer the default browser? I tried and couldnt find it.. An answer is all i am looking for.

This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.

THANK YOU VERY MUCH.. you made my day :]

Thanks
Thanks works perfectly on my T-Mobile wing

This worked on my Fuze too. It is a big help.
Thanks,
cj

Code/ Steps to create the cab file
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor

ankit.to.excel said:
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor
Click to expand...
Click to collapse
There are cab extractors I'm sure that could be used on it, but otherwise I wouldn't have a clue, I just saved it from another thread. I couldn't find the thread, so I just attached the cab I'd saved.

ankit.to.excel said:
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor
Click to expand...
Click to collapse
Unzip it was WinRAR and have a look at the _setup.xml.
Or try a product like WinCE CAB Manager, or any other good cab creation software
Or just google, creating CAB files, there's lots of suggestions
Ta
Dave

IE vs. Opera
So I have tried switching OPERA TO IE on
tf3d but cant get it. Any ideas? Ive tried using total commander, and using mem. card to laptop and back.

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.
Click to expand...
Click to collapse
THANK YOU!!

Hi Just a question.
Can you uninstall the app once it has set IE back to the default? Will this leave IE as the default?

thanks
[thanks its working

thanks
thanks it is working

Sorry if this is a newb question. It's working with email links, but how do I change the HTC touchflo settings to make IE the browser that is invoked from the touchflo menu at the bottom of the screen? I can't seen any touchflo settings besides the thing about sounds when finger scrolling, etc.

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.
Click to expand...
Click to collapse
Thanks GREAT!!!!!!!!

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Click to expand...
Click to collapse
Hey, thanks for this. It works 100% tested on an XDA Zest
-------------------------------------------------------------------
http://flymustang.com
http://theflightstuff.com

ankit.to.excel said:
hi,
Can anyone please let me know the xml registry coding used for the same and the procedure for creating this as a cab file? I am really interested in knowing the coding for the attached cab file []
Regards
Amajor
Click to expand...
Click to collapse
stevation said:
Sorry if this is a newb question. It's working with email links, but how do I change the HTC touchflo settings to make IE the browser that is invoked from the touchflo menu at the bottom of the screen? I can't seen any touchflo settings besides the thing about sounds when finger scrolling, etc.
Click to expand...
Click to collapse
Welcome on board!
By searching & reading this greatest smartphone forum in the world you can find the answers of 99% of your questions. First please go to the General >> About this forum section to learn have to make good use of this site.
Glad we have more curious members now!

wg5566 said:
Welcome on board!
By searching & reading this greatest smartphone forum in the world you can find the answers of 99% of your questions. First please go to the General >> About this forum section to learn have to make good use of this site.
Glad we have more curious members now!
Click to expand...
Click to collapse
Nice way to avoid answering his question.

Thank you, you have helped me a lot!!
I've wasting my time looking for a solution for this, as just making an association ended up in infinite loop! (this Microsoft sh*t!), but your program solved it!!!
Thank you from Spain!
David Bluecame.

khaytsus said:
This was originally named something else, but I renamed it so I could find it again. It's buried in a thread somewhere.
Anyway, this restores the registry settings for IE and has fixed IE getting hosed a few times. By Opera, or seemingly randomly. I've had to run this at least 3 times in the last 3 months.
Click to expand...
Click to collapse
----> Thanks!
This worked on my HTC Touch Pro and my HTC Touch Pro II ...Opera just isn't ready to be the default browser. Too much overhead, its just too slow (even on the Touch Pro II) and I just cant count on it for viewing web pages consistantly like I can with IE. One day I will be able to watch a YouTube video on my Windows Mobile phone ...still waiting for that day. The Droid certainly is a fast bugger and can you tube but between the keyboard and the excessive power usage ...and quite honestly lack of application support ...I am sticking with Windows for now. This little fix made my life much better. Thanks again.

few HTc FUZe Qz !! ??

Watsup guys, I just bought a HTC FUZE 2 days ago (att) and it's awesomeee..i just have a few questions and i went through some of the threads but can't really find easy answers because i' m busy with school or work so i was hoping somebody could help me out right here...
1. I've heard that you can make the ROM, (i think its called) faster but i don't want to have the warenty voided or anything like that..
2. What are the best tweaks and APPS i can use because i cant seem to find a app store like place for the HTC ?...can any windows mobile app be downloaded in the fuze ??
3. I've seen a few themes out there but to get them do i just download the CAB file and open it ..? hw do i delete it to get the normal default flow theme ???
would be great if somebody could explain it and give me some really cool / useful apps to show off my htc and just help me out

insanekid said:
Watsup guys, I just bought a HTC FUZE 2 days ago (att) and it's awesomeee..i just have a few questions and i went through some of the threads but can't really find easy answers because i' m busy with school or work so i was hoping somebody could help me out right here...
1. I've heard that you can make the ROM, (i think its called) faster but i don't want to have the warenty voided or anything like that..
2. What are the best tweaks and APPS i can use because i cant seem to find a app store like place for the HTC ?...can any windows mobile app be downloaded in the fuze ??
3. I've seen a few themes out there but to get them do i just download the CAB file and open it ..? hw do i delete it to get the normal default flow theme ???
would be great if somebody could explain it and give me some really cool / useful apps to show off my htc and just help me out
Click to expand...
Click to collapse
To avoid you from getting flamed , check out the wiki for general guidlines now to the questions
1. If you flash ROM your phone will be better, MAKE SURE YOU FOLLOW THE INSTRUCTIONS IN THE ROM SECTION, MAKE SURE YOU DO NOT FLASH A CDMA ROM TO YOUR PHONE. For warranty purposes you can always restore your phone to factory (reflash factory rom, radio, etc.) for a return, I have never had an issue returning a device to ATT (just reflashed factory rom/radio and returned). Remember, back up your personal data (email, contacts, etc.), Hard-SPL, then flash. If you follow the directions its easy and safe, and you can always go back if you need to return the device.
2. Microsoft has not yet rolled out an app store (its coming) most roms have a bunch of stuff cooked in, check out this forum for apps or www.fuzemobility.com for others. Also if you want an app store like product, go to the Hacking and Development forum (towards the top of all the forums) and search for JAK, its a community app store you can setup on your phone (and it is badass)
3. settings>system>remove programs find the theme on the list and remove it.
Thats it you get your one round of noob questions, for the rest read the threads and spend some time in the forums!

hah thanks alot aaronsmckee i just noticed the *READ THIS BEFORE POSTING* thread .. ima have to look around the websites you gave me..thanks alot

1. Here is a post for a cleaner install that doesnt flash the ROM and void the warranty.
http://forum.xda-developers.com/showthread.php?p=3042587#post3042587
Click to expand...
Click to collapse
Here is a post for some great tweaks
http://forum.xda-developers.com/showthread.php?t=413562
Click to expand...
Click to collapse

how to handle this situation
I made a website specifically to keep threads like this from spiraling out of control. So when you get a guy like this looking for awesomeee APPS and really cool TwEaKs and warentee info just say go to blownfuze.org and the thread can then be closed.
Doug

Here's an extensive list of tips/tricks/tweaks/apps for the Fuze: http://www.ppcmobility.com/forums/showthread.php?t=367
It's part of FuzeMobility.com and it's the one line version of all of their postings