Related
When you don't hear your calls and infact your call is in progress, this occurs normally in the morning when your unit take a nap in the night.
The solution is turn ON your bluetooth and then turn it OFF or just remain it to ON.
This problems occurs frequently who use bluetooth headsets.
I don't use any bluetooth headset and I still have this issue... can't ear anything...
So you say that your solution is valid? Great! I'll give it a try!!
anyone tried?
it works??
!Working! Solution
Remove BTTrayCE.lnk from Windows\StartUp, and the sound problem is solved.
To enable BT again, run Run_BTTrayCE_10.lnk and BT icon will appear.
To disable it again, u have to soft reset the machine.
Cheers,
Senator
THIS WORS FINE. I HAVE THAT SYSTEM WORKING IN MY 9090, FOR 2 MONTHS ALMOST AND THE PROBLEM GONES.
REGARDS
BY THE WAY, I FOUND THIS PROGRAM THAT IS THE SAME OF WINDOWS XP TASK MANAGER, TO POCKET PC, THAT ENABLE YOU TO END THE PROCESS WITHOUT RESET.
Please can someone give a solution for this "no hearing the caller" problem!!!! Otherwise I can't use my qtek 9090. Everytime to switch the BT on and off isn't real solution.
My solution works...
yes but is that a real solution. I mean it' s not a real automatically solution. everytime I want to use BT I have to start it. is a radio update to 113 no solution?
Haven't updated yet, try it.
Has anyone else had a problem keeping a Bluetooth GPS receiver paired with Tomtom. After much messing about I managed to get tomtom working and even paired it with the receiver, but when I switched off tomtom and restarted it the next day I had to redo all the pairings again, altering com ports etc.
Surely this can't be right
same problem here,
still looking for a solution, will post here if i found it, if you can find it first, please post it too...
i'm gonna take a look at the file properties written by TomTom, maybe they are setup to be readonly, making Tomtom forget it' setting and rest the com-port settings after every restart.
i m not sure yet if it's a tomtom problem or a bluetooth / gps problem of windows mobile 5.
CIAO!
VOODOOS!L
Bluetooth tomtom
Look in the registry for the com9 change that to com7 (the com port you used for pairing with gps device. It should work. Bought regedit.net for editing the registry
try to change in registry
Where do you change it in registry edit
Did you open up the GPS control panel?
I found thizs excellent walk thru a few month's ago & have had no problems whatsoever.
http://www.howardforums.com/showthread.php?t=742385
I finaly found the problem: at the bluetooth pairing setup of the com-port, the default selection is to use a secured connection, but it seems like TomTom doesn't support a secure connection very well..
so if anybody else has this problem: remove the current bluetooth pairing of your GPS device, repair, select the serial connection, add a new outgoing port to be for example COM6 and remove the "secure connection" selection.
Open TomTom and select the COM port you used as at the Bluetooth pairing com port.
Now, when the GPS is turned off and back on again, the pairing will be remembered and TomTom will immediately recognize your GPS.
I hope this will solve some problems for other people too...
CIAO!
VOODOOS!L
BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test)
This is just some test of mine to hv option with BT stack (MS/Broadcom), I only spend the last 3 hour workin on this little project, so it really possible if anything is missing or I forgotin something (its happens to me right?..lol), but I've test it and it work like it should (With My v1.3 ROM), I dont know if this test hv a bug. maybe we can test it, especially A2DP and stabilty issues with this test.
Tested operation:
1. Activesync
2. Send/Recieve File
3. Headset via computer
4. Network Access
5. BT Serial Port
6. Dial-up Networking
Known Issue:
U tell me, not tested so much.
Instalation:
1. Install the HELMI_BA_WM5_BT1.7_TEST.CAB then soft reset
Uninstall (note the step its really neccesary, or u'll endup mess with ur phone):
1. Install Enable_MS_BT_.CAB
2. Delete registry value (or the folder)
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM]
and delete "Redirect" key on:
[HKEY_LOCAL_MACHINE\ControlPanel\Bluetooth]
"Redirect"="BTConnManagerCE.exe"
3. Reset
4. Uninstall HELMI_BA_WM5_BT1.7_TEST.
5. Delete file from \Temp dir
EDIT:
I forgot to mention, after u run ENABLE_MS_BT.CAB the Broadcomm/Widcomm file will be move to \Temp folder so u can delete it safely...
Dont expect to be perfect on this release, cos its only on earlier stage, to early, hopes someone might help for improvement, and workin together with me, and I hopes some1 can make a better Install/Uninstall process.
Dont install/try if u dont know what ur doin, and backup your data is a must.
Input is always welcome. cos I believe there's still much things to do.
Thanks for http://www.aximsite.com site and everybody there for the BT file.
http://www.aximsite.com/boards/showthread.php?t=122247
and also thanks -=xXx=- for the info where to find it. thanks man.
Helmi
gonna test it now helmi_c
thanks
Just intalled. The stereo works fine! Great quality for me! The hands free seems to be a bit tempremental. Worked once and then stopped afet receiving one call.. WIll try it out again..It looks like am stuck with an either. One observation: with the ms stack, there was a headphoen icon while using the phone. is absent here...wonder if that was a ms stack function?
deepak
helmi_c,
hmm weird, after i installed the new wildcom stack, my pda cant see my headset anymore.
still testing though.
wish me luck.
imatrix
I believe u guys both hv problem with MS Stack, hopes this stack will help for who having problem with MS Stack, but remember this is just some sort test, maybe still need a lot of improvement. but its seems work good with deepakr who hv problem with MS, imatrix hopes u'll hv the same result like he does. good luck.
btw In the rar there's a BTspeed cab, it might help for some headset, post on the Axim forum sites... there's also another app for controlin power if i'm not mistaken, I'll post when i get back.
A little note, this stack sometimes wakeup if gsm signal is lost/found, if the signal of gsm is good, it shouldnt happen (theoriticaly speaking..lol..).
helmi_c
Firstly great to see BT restarting automatically after handset is switched on from standby mode. After some fooling around I was able to set up activesync and it worked like a charm (useful for me especially since USB activesync does not work)
Couple of problems I faced
1. Turning off and restarting BT gave me a unable to load driver due to insufficient memory error. When I stopped my activesync, outlook and contacts and tried again it started successfully.
2. I was unable to find the DUN service and my PC did not recognize a DUN service either - am I looking/not looking at the right place?
Thanks and highly appreciate your prolific contribution
-AKC
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
hi..
hi have instal this, and find some issues
1- if i turn on bt the wifi dont work..
2- if i turn on wifi, the bt give the memory error
afther use 1 off the things (bt our wifi) need a soft reset to work the other
Riddler said:
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
Click to expand...
Click to collapse
No, it does not work on WM2003SE, I installed it and I had to hard re-set my Imate, it works only under Wondows 2005!!
Any way I gave it a try and I had to hard reset my PDA any way!!
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
helmi_c said:
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
Click to expand...
Click to collapse
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
NO HANDSFREE PROFILE
Hi
nice integration and thanks but i went back to ms as my sony ericson hcb-700 wll not pair for some reason after looks like the handsfree profile is not working
The Audio stream is great with this BT solution !
But when I connect to my parrot ck3300 carkit, It opens the connection like there is a tel.call active. when i press the hangup button on my carkit the BT connection is gone.
So it seems it is connected as headset and not as handsfree phone,
One other thing, when I connect to my BT Sony Ericsson HbH ds970 stereo headset I cannot shut off the screen in tcpmp player ???
(I think this also happened with th MS stack)
any solution for this ?
Last test (with my clean AKU3.2 v1.3) with BroadcommPatch1 applied and no overclock:
Turn on/off 4 times and reconnect below service (get bored to turn on/off and play with it again):
currently active BT service at the same time is:
1. Activesync / Bluetooth serial Out (syncing)
2. Network Acces/ Bluetooth Networking
3. Audio Gateway / Calling my mobile operator and stream audio to my pc as headset
4. Send/Recieve file from pc and from pda
5. Bluetooth serial In
and currently active application (leave as background procces I dont close it):
1. Activesync (Syncing)
2. Calendar
3. Contact (580 contact display)
4. Excel Mobile opening 185kb file
5. Album
6. Word Mobile opening 220kb file (little bit slow on opening)
7. Powerpoint Mobile opening 350kb file till end slide
8. Notes
9. Task
10. Bluetooth Manager
11. File Explorer
12. Calculator.
lastly...activate Wifi...wifi detecting & connect to neighbor network... turn off wifi...activated again...detecting & connect to neighbor network again...
but I dont test the GPS (serial port) or A2DP stuff since i dont hv it.
turn off bt...turn on again...reconnect the above BT service...do this 4 times.. still no memory issues. well maybe I'm just bein lucky... but the battery is drain more faster with this test, maybe because this is somekind of stress testing.
so far this Broadcomm stack still running well...the sound from Audiogateway while this test active is still ok, but if the gsm signal is bad, the sound is bad also, so its not bt problem its a gsm problem. btw the ShutXP Icon on the tray is GONE..thats weird.., that the only issue I hv..
btw does anyone know where to find a PC Widcomm/Broadcomm driver that support A2DP, I dont remember where to find it. My PC Widcomm driver version is v1.4.2 Build 12, quite old, I want to test the a2dp profile.
btw if u play with:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\HandsFree]
"SupportedFeatures"=dword:37 (default doesnt exist)
"ServiceMask"=dword:1
"AudioSetupDll"="\windows\HTC_PCM_Routing.dll" (default MkSpk_PCM_Routing.dll need to play with this and see what more widely support device)
"AudioPreferences"=dword:2
"AudioHandling"=dword:13 (default 8 )
there's a Icon if headset is activated. but its seems unstable in my device, try it.
bigsteve said:
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
Click to expand...
Click to collapse
Waitin for ur input...
jakubd said:
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
Click to expand...
Click to collapse
oops... well, maybe its a little bit tricky to strip out completely the old stack, but I'll try learn this... or any input is more then welcome
deepakr said:
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
Click to expand...
Click to collapse
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut.
hey helmi_c,
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut
Click to expand...
Click to collapse
yep still have the static noise, will try your method later.
been bz this few days, i did not test much. I will play around with it tomorrow.
thanks.
imatrix
Thanks Helmi, great job!
A2DP works nicely, but now i get the same opposite as compared to microsoft stack. my A2DP is perfect whereas any calls that come in ring through the hedset, but i can't pick the calls up / talk through the bluetooth headset. weird uh?
Anyone hit the same problem?
I have no problems with static, just some slowdowns due to processor usage and i can't toggle the screen in WM or using display switch.
Great Job though!
edit:
maybe its because i'm connected as both headset and high quality audio? going to try connect as hands free and HQA.
edit 2:
can't for the life of me find out how to pair it in handsfree mode! Any pointers?
Don't use. Users reports, that it worse, than before.
Attachment deleted
Old post:
In the old days of WM5 on BlueAngel there was a problem with BT driver:
- it doesn't properly wake up after device suspend/resume
- it was unusable as hands free if device is in the suspend mode.
There is a good fix: http://forum.xda-developers.com/showthread.php?t=267389 but device wakes up randomly.
I have no advanced hands free device (simple bluetrek G2). Could anybody check attached CAB and provide some feedback?
BT is still on after pressing power button on/off
BT device can wakeup BA.
I cann't test more
baniaczek said:
In the old days of WM5 on BlueAngel there was a problem with BT driver:
- it doesn't properly wake up after device suspend/resume
- it was unusable as hands free if device is in the suspend mode.
There is a good fix: http://forum.xda-developers.com/showthread.php?t=267389 but device wakes up randomly.
I have no advanced hands free device (simple bluetrek G2). Could anybody check attached CAB and provide some feedback?
BT is still on after pressing power button on/off
BT device can wakeup BA.
I cann't test more
Click to expand...
Click to collapse
I may just be thick, but I don't understand what this cab does as opposed to the Big Mike fix, and I don't understand what exactly you want us to test. I have a Motorola HS850 which I use all the time as my hands free device. I'd be glad to test if you explain what you want me to test.
motisu said:
I may just be thick, but I don't understand what this cab does as opposed to the Big Mike fix, and I don't understand what exactly you want us to test. I have a Motorola HS850 which I use all the time as my hands free device. I'd be glad to test if you explain what you want me to test.
Click to expand...
Click to collapse
cab contains only bthuart.dll (like big_mike patch), It replaces big_mike patch.
It looks, that:
- BT still works
- BT properly wakes up when BlueAngel wakes up
- BlueAngel doesn't wakes up randomly
- after pressing power off: BlueAngel can be woken up using hands free.
I can't check:
As I can understand: advanced hands free can be used to: dial (or redial) using only hands free. I don't know if it was possible without this patch. If yes - I can't check if this possibility still exists.
I can't check quality of the sound.
I can't check if BT stereo headset is still working after using this.
If redial still would be possible, quality would be the same and stereo would work - I would replace big_mike patched bthuart.dll with this one. BlueAngel would't wake up randomly anymore.
I've tryng it now, i'll post any feedback later.
Thanks and regards
I've used H1.4.Ban.R1 (lazy to flash new one) + NOKIA LD-3W /GPS and BT is working like the old one.
BA wakes up randomly, ..., everything remains the same.
To me is no good. Every time turn off/on bt is off. (loke before bikmike) and when my headset is connect it's impossiile to disconnect it . (i've to call and stop calling to disconnect my headset).
For now i coe back to old dll.
Regards.
Strange
Thanks for feedback
I'm deleting it.
baniaczek, while you're looking at BT, let me remind you the problem I have when trying to use a BT stereo headphone with Windows Media (or with another player, for that matter): alas, it doesn't work...
By the way, I have no problem at all with BT when using the same headphone as hand free, or when using a GPS device... the only issue is with music...
Thanks again for your huge work!
Hi baniaczek,
i have tried it and it seems that the problems still exist.
Actually using it over the ROM created by your kitchen, made the use of BT difficult:
- It turns the BT off after the PDA is powered on.
- It turns on the PDA randomly, more frequently than before.
Cheers
Chris
I wonder if anybody knows if it is possible to have two (or more) divices connected at onceon a Blue Angel?
eg. Tom Tom 6 plus a hands free connection.
I have tried every configuration I can think of, different ports ect, but to now avail.
With the gps connection up and running, as soon as you turn on the hands free , the gps connection link is lost, turn off hands free and it will resume connection.
I am using BA WM5 AKU3.5 R4 - xplode's excellent rom
In GPS settings
Program is using COM 5
Hardware is using COM 0
Manage GPS settings set to Auto
In Device settings,
BTGPS unit is on COM 0 (Serial box ticked)
Hands free is unassigned
Any help will be much appreciated.
any idea's anyone?
On Last Baniaczek's ROM I made an experiment just a moment ago: BlueAngel, Navigation system (Polish one, Automapa), plus GPS on Bluetooth and A2DP headset - first connected headphones, then added GPS (using automatic GPS connection - it's M$ Stack) - Everything seems to be working fine. I thought it was a bit unstable at first, but AD2P stops sending data, when there is no sound from the device.
GPS Settings are default: COM6 for applications and GPS has COM7 assigned on Hardware tab and in Bluetooth outgoing port. Quite seamless.
then I made the 2nd one: same headset connected in Handsfree mode: indeed turning on navigation made it connect and disconnect every few seconds.
For me it seems to be fault of M$ BT stack: it cannot hold 2 similar streams on BT (COM and Handsfree/Headset are both typical serial connections of highest priority in BT stream). At the same time it can cope easily with two different streams (A2DP is lower priority, high-bandwidth BT connection).
I'm not sure, but I think when I used old Helmi 1.3.2 with Widcomm stack it could cope with GPS and Handsfree at the same time, but it needs more testing.
jakubd is right it is limitation in MS BT Stack
Don't give up and it should start to work. I have similar problem with BT GPS and BT headset. GPS goes on and off while headset is on. And than I try to switch headset off and on, BT off and on, GPS off and on and after some time it start to work together with no problem. It takes first 10-15 minutes of my voyage but then it works for the remaining few hours.
Sorry, but I still didn't find out what combination make it work. If I do, I will post it here as workaround.
And I'm almost sure that I had no such problem with Helmi 1.4 ROM.
Thanks guys,
have tried every configuration I can think of, but its always the GPS connection that is dropped, not the hands free, this would not be a problem if it was just when you are answering a call.The GPS reconnects only when you disconnect the hands free connection. ?
Has anyone Successfully used the Widcomm stack with this type of setup?
I am sure alot of members would find this usefull if it can be made to work!
This is my experience:
ROM : Helmi_BA_WM2k5_AKU3.5_v1.4.CF2.R2 (baniaczek)
Tom Tom 6
GPS : Bluetooth
Headset : Nokia BH-300
When the headset is on and connected, the GPS doesn't work (TT say no GPS found). When I turn off the headset, the GPS is working.
With ActiveSync I have the same problem: when the headset is turned on, I can't establish a connection with the PC via bluetooth.
BUT!
If I use a different headset, a Logitech HS03, all is working fine. I can leave the headset on and the GPS is working. I can receive incoming calls with no problem (using the headset) while I'm driving without loosing GPS signal.
With ActiveSync is the same: I can connect my PC with the headset on.
I have no idea why there is this difference with these two headsets, but one is working and the other no. I don't know if the problem is the MS BT stack, but my test demonstrates that under some circumstances this stack could manage more than one connection at time.
bigmike said:
I don't know if the problem is the MS BT stack, but my test demonstrates that under some circumstances this stack could manage more than one connection at time.
Click to expand...
Click to collapse
Bigmike, my point exactly. As I wrote in my post I keep turning on and off until finally it works. So there are some circumstances under coexistence is possible.
It seems that devices try to use same port which means that first device does not reserve port for itself. I am not an expert but it seems if we could somehow force devices to use different ports problem would be gone.
bigmike said:
If I use a different headset, a Logitech HS03, all is working fine. I can leave the headset on and the GPS is working. I can receive incoming calls with no problem (using the headset) while I'm driving without loosing GPS signal.
Click to expand...
Click to collapse
If this works with one set and doesn't work with another, it might be connected to list of profiles supported by the headset:
1. Headset - HSP - more common, typical profile for use with cell phones (supports AT commands)
2. Handsfree - HFP - audio-centric, used mostly in cars, less common
http://en.wikipedia.org/wiki/Bluetooth_profile
My SonyEricsson HBH-600 has both profiles (checked with services list on SonyEricsson phone), but I don't know how to select which profile is used by headset.
Just a thought...
sassa said:
Bigmike, my point exactly. As I wrote in my post I keep turning on and off until finally it works. So there are some circumstances under coexistence is possible.
Click to expand...
Click to collapse
I hope you haven't misunderstand my previous post. I haven't in mind to minimize the value of your post (very useful is someone will try to investigate about this problem).
I was thinking that somebody, reading your contribute, could wrongly think: “you're are a lucky guy and turning on-off the headset repeatedly you crash some library and the two devices are working together”.
My intention was to remark the fact that under some circumstances the headset and the gps can connect together every time and always at first try: it's not lucky, crash or random events.
jakubd said:
If this works with one set and doesn't work with another, it might be connected to list of profiles supported by the headset
Click to expand...
Click to collapse
I have a similar thought.
It seems to me that some times ago I have read that it should be possible to change some profile's parameters “playing” with the registry.... but I could be wrong...
bigmike said:
I hope you haven't misunderstand my previous post. I haven't in mind to minimize the value of your post (very useful is someone will try to investigate about this problem).
Click to expand...
Click to collapse
No I have not, bigmike, just the opposite. I was delighted that somebody confirmed my point.
bigmike said:
My intention was to remark the fact that under some circumstances the headset and the gps can connect together every time and always at first try: it's not lucky, crash or random events.
Click to expand...
Click to collapse
Couldn't agree more. And I think it's worth trying to resolve it.
Multiple BT connections - solution?
I think I find a solution for this, or maybe we can call it workaround. At least it works for me.
As I wrote in my previous posts, I could make it work every time just didn't know how. Now I established repetable procedure which worked every time for reasonable number of experiments.
Secret was to turn on BT headset (in my case Plantronics) and BT GPS device (Haicom 406-BT) and GPS program (iGo) first, and then go to Comm Manager and turn bluetooth on.
So my procedure is:
1. make sure that BT is off in Comm Manager
2. turn on BT headset
3. turn on GPS device
4. open iGo program
5. minimize iGo
6. turn on BT in Comm manager
7. open iGo and make sure it's connected
8. go to phone and call myself just to make sure it works
9. back to iGO and make sure it works
If 8 or 9 fails for the first time, just turn BT off and on again in Comm manager and check it again. I never need to do this more than twice.
Try this, guys, and good luck.
P.S. I don't know if it matters, but make sure that in Settings/Connections/GPS "GPS program port" and "GPS hardware port" is set to (None) and "Manage GPS automatically" unticked.
Very good! Many thanks Sassa!
I have tried for two times your procedure and both tries worked very well (with TomTom6 and Nokia BH-300)
I use a slightly different procedure:
1. BT off in Comm Manager
2. turn on BT headset
3. turn on GPS device
4. turn on BT in Comm manager
5. open TomTom 6 (wait some seconds and make sure it's connected)
6. go to phone and call myself (on the first call the headset is disconnected)
7. back to TomTom and make sure it works
I have noticed a different behavior of the BT headset having the BT always on (in Comm Manager) and using this procedure... but I need to make some tests before writing more.