Add/Remove programs problems! - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi guys, need help pls. I did a hard reset on an mda III and re-partnered with activesync. When i try to re-install my apps(spb p+ 3,Journal bar,etc) the add/remove window flashes on screen for a second but nothing else happens. I've even turned of anti-virus and firewall. Any help would be appreciated.
Cheers!

Even i am having a weird problem with the add/remove programs. If i try to uninstall a program it gives me an error and doesnt remove it. I have to manually remove. But the memory doesnt increase when i remove it. Can some one help.

Related

Button lock always returns after soft reset

Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again

Registry and Spb Pocket Plus

Hi Guys,
I've a problem with Spb Pocket Plus and with the default settings of my TyTN II.
I'll try to explain, because my ROM is in italian and I don't know how to translate them in english.
So, these are the facts:
I've installed the Trial version of Spb Pocket Plus 4.0.1 and I've checked the option to override the default X close button as you can see in pc_capture1.jpg.
Then I deselected it and reenabled from Settings - Buttons the two default items as you can see in pc_capture2.jpg.
But as I can try on my device, after a soft-reset, I can't see in the upper right of the screen the item that can let me choose to see and eventually close the applications running on the device pc_capture3.jpg
Now my question is: what is the registry key that I have to (re)set so I can reenable that functionality overriding that ugly settings from Spb Pocket Plus (that I've deinstalled but without success in resetting the item I need)?
Yes, I know it's difficoult to understand that pictures that are in italian, but if someone can help me, I'll be glad with him/her.
Bye,
ghale.
I know this dosen't really help because you seem to be talking a different avenue than I did... but I had to totally uninstall to get the HTC X back. There is a CAB for the HTC task manager that you might install and see if it over rides the SPB settings...?
Sorry.
If you have both Pocket Plus and the HTC Close Button app running at the same time, your results aren't likely to be good. Either disable the Close Button in Settings, or shut down PP's close button in it's settings, and then soft reset. If that doesn't work, remove Pocket Plus (your settings should be preserved) and reinstall.
Done.
I've the same problem.
Thanks, btw.
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Simply means that the problem was NON solved.
So I've reinstalled Spb and I'm trying to use the Spb method to close the application, instead of the HTC one.
I've tried also to install the HTC Task Manager, from 1.51 to 2.00, overwriting the ROM files, too, but without success.
I've tried a lot of time, but no solution.
If someone has other info, please let us know.
Bye,
ghale.
PerfAlbion said:
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Click to expand...
Click to collapse
Go to settings - system - task manager - button and make sure both boxes there are unchecked. I run Pocket Plus (3.2 upgraded recently to 4.0) without an issue. If that doesn't resolve the problem, it may be something else you're running.
You might try posting your question(s) on the SPB forums. Mods there are most responsive to issues, especially with newly released versions of their software.
http://www.spbclub.com/forum/

manilla

i recently installed manilla 2D and i cant seem to unistall it. has anyone found a way to uninstall it sucessfuly without a hard reset?
i heard somewhere that a hard reset will remove your custom rom is this true? i dont want to have to re flash my phone.
thanks in advance for any help.
RubberDucky451 said:
i recently installed manilla 2D and i cant seem to unistall it. has anyone found a way to uninstall it sucessfuly without a hard reset?
i heard somewhere that a hard reset will remove your custom rom is this true? i dont want to have to re flash my phone.
thanks in advance for any help.
Click to expand...
Click to collapse
I think a hard reset is the recommended way to remove it. And no, a hard reset will not remove your rom, it will put it back like you just finished flashing.
NO U DONT HAVE TO HARD RESET
why go thru all that when there's an easier way.
what u need to do is:
1. dl and install sktools
2. make sure its not active on ur today screen
3. use sktools to uninstall it and soft reset once its done.
tadaaaa
Trial and error method!
Hi all,
My trial and error method which worked is to uninstall all the apps which came with Manilla2D, e.g. new comm manager, audio manager, etc. Ignore any messages that say "not completely uninstalled". Then, uninstall Manilla2D in the normal way, you will of course get the usual "not completely uninstalled" message. Select "No" to removing from list of installed applications. Then re-install the same Manilla2D cab file that you installed before. You will see the message: "The previous version will be uninstalled..." select to continue, then you will get a second message saying: "The previous version was not completely uninstalled...do you want to continue..." at which you should select to do so. The "install" will take about 3 or 4 minutes then if you are not prompted to restart your device at the end of the installation, you should do so anyway. When your device restarts it should be M2D free. N.B. one thing that seemed to help this process was preventing the device going to stand by during the whole process, by plugging it in or changing the power auto-off settings.
This method is not proven so it may not work on your device.
N.B. I am using ROMeOS 4.6.0. If you do need to hard reset your device I recommend this ROM anyway.
Best wishes,
andrew-in-woking
JstarLuvsTina said:
NO U DONT HAVE TO HARD RESET
why go thru all that when there's an easier way.
what u need to do is:
1. dl and install sktools
2. make sure its not active on ur today screen
3. use sktools to uninstall it and soft reset once its done.
tadaaaa
Click to expand...
Click to collapse
Yes, after trying various things to remove Manila (including trying to install it again as suggested in another post) the only thing that worked for me was sktools BUT - even after SKTOOLs removed it, it left behind various side effects which took me two more days to get rid of
(i) I use Nadavi_Task_Manager_2_0_31261 . Its onscreen quick menu was spoiled. I had to remove and re-install it to get it back to normal
(ii) HTC Home - many things were screwed up, all teh phone numbers i had set up on the Favorite People tab were gone and I could not add any number. The weather tab had stopped working altogether. I had to install a patched version of HTC Home I found on these forums (not because I knew what I was doing but because I did not know what else to do!!)
So after all that I am wondering whether it would have been just easier to do a hard reset and restore from a back up (which as it happens I had taken just minutes before installing Manilla)
smjoshi said:
Yes, after trying various things to remove Manila (including trying to install it again as suggested in another post) the only thing that worked for me was sktools BUT - even after SKTOOLs removed it, it left behind various side effects which took me two more days to get rid of
(i) I use Nadavi_Task_Manager_2_0_31261 . Its onscreen quick menu was spoiled. I had to remove and re-install it to get it back to normal
(ii) HTC Home - many things were screwed up, all teh phone numbers i had set up on the Favorite People tab were gone and I could not add any number. The weather tab had stopped working altogether. I had to install a patched version of HTC Home I found on these forums (not because I knew what I was doing but because I did not know what else to do!!)
So after all that I am wondering whether it would have been just easier to do a hard reset and restore from a back up (which as it happens I had taken just minutes before installing Manilla)
Click to expand...
Click to collapse
wow the first i heard of anything like this before..thats just crazy
ive de-installed and re-installed plenty of times prior to having manila on a rom with no issues, even during the opening hours of the coding release we had.
did u run the sktools clean up after de-installing?
registry cleaner as well?
and i presume u soft resetted as well? as the instructions say to do.
also u have to understand m2D isnt just a theme..its an app that takes over whatever else u had on ur today screen, just like any other app and also its not perfected we're still trying to get there, we're damn near close..but not at 100% just yet.
Whenever I get the "not completely uninstalled, would you like to remove from list of programs?" message, I just choose "No", soft reset, then uninstall the program once again. Works every time.
Hi guys,
I tried to uninstall Manilla2D too, and I used Sktools. But when i came to "Installed Programs" i couldnt see Manilla there. There were only 2 programs there: Microsoft Windows Mobile 6.1, and SK Software SKtools.
Please tell me how to uninstall it. Im really sick ot it now...
Thanks

Help with uninstalling something with SKTools

hi i have installed a the Colour 3G 10 Button touch home dialer comm manager on my tytn ll but dont want it anymore and now i cant uninstall it, i try to run the installation process again to have the existing installation removed but i always get a message that it cannot be uninstalled, so i have gotten the SKTools program to remove it but still cannot find or remove this thing, can someone tell me where to look or how to get rid of it. thank you.
In SKTools:
- to be safe, start by doing a backup of your device (Sprite Backup or similar)
- select installed programs, then select the app you want to uninstall (and no other, otherwise they will also be uninstalled !)
- it shows all the components installed for that app
- make a screen capture of the installed components and save it for later reference
- select "Action", then "Uninstall marked" (not Uninstall marked standard !)
- if all goes well, it should be uninstalled
- otherwise, manually uninstall the components in your saved screen capture.
hi and thanks. see this is the problem tho, this 'Colour 3G 10 Button touch home dialer comm manager' is not showing up in the installed programs, i actually cant find it anywhere, i mean i know its there somewhere obviously, but i've even unzipped the file on my computer then looked for the files that came out of it manually in the windows folder and a few other places and using the search function of the fone and on SKTools and still can't find it haha. bugging me man. actually the search function doesnt bring up anything, i type in the exact file name of a few of the unzipped files and get no results. and now actually my original dial pad on the phone has been messed up too.so if anyone knows where i can find the windows mobile 6.1 phone dialpad i'd appreciate that too. does it even come separate?
First, did you soft reset after your uninstall? It often helps.
Also, being careful and using a registry editor, did you check if there are any unwanted remnants of the old dialer in the registry?
hi, thanks. no i didnt do a soft reset, i dont even know what that is actually. and i can't uninstall the app thats my problem. how would i know what files to look for in the registry?
thank u.
dude.5000 said:
hi, thanks. no i didnt do a soft reset, i dont even know what that is actually. and i can't uninstall the app thats my problem. how would i know what files to look for in the registry?
thank u.
Click to expand...
Click to collapse
1) search for soft reset on this forum
2) under HKLM/software and HKCU/software, look for the name of the editor/developper or the name of the app
Again, be careful
Have you made sure commanager is not running before uninstall?
A way to make sure is to soft-reset "turn device off then on "

[SOLVED] Missing Task Manager icon after WisBar

I installed Wisbar, didn't like it, removed it. Now the usual taskmanager icon is missing from the top bar... anyone knows how to fix it?
thx
Ok, it seems something is preventing the TaskmanagerService from autostarting even though MemMaid is showing it to be set on auto. I can start it manually but after soft reset it's stopped again.
curses!
Got it. Using MemMaid stop it, set it to auto, soft reset without starting it. On the next boot should be loaded automatically. What a strange software this wisbar.

Categories

Resources