Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again
Related
Can someone tell me how to "clear" the recently used apps when you hit the start menu? I find it cluttering and would like to clear it if not eliminate it altogether. Any ideas? Thanks!
sometimes help soft reset, but not everytime..
there is a software.. called.. "clearmenu", or "clearitem".. or just "clear" which is attached to many cooked rom, that is to be installed to your Windows/Startup folder.. which will clear everything in your most recent used list on every soft reset. You can clear it without soft reset, in case you are wondering. and soft reset will not do the job if you dont have the software.
i do not want to spam this thread and discuss it with you, but do not agree with
and soft reset will not do the job if you dont have the software.
Click to expand...
Click to collapse
. this is not true...
patr!k said:
i do not want to spam this thread and discuss it with you, but do not agree with . this is not true...
Click to expand...
Click to collapse
interesting.. but can I check with you the OS that you are using? Or, better still, you just go into your "\Windows\Start up\" to check if there are anything there, that starts with a 'clear'?
Anyway, since you said "sometimes" soft reset works, I would assume that it is not a repeatable process. If that's the case, probably that the 'sometimes' is the case where the regsitry got messed up and the 'recent used list' gone, and hence coincidently it worked as you wanted to.
Anyway, it is quite a new discovery, but just check with me the `start up` menu (better still, list everything there, can't be too much stuff there), to see if there are any working ones there.
ok, what i want to say is that clearing with apps you mentioned is not only one solution and as you correctly typed, it is done only "sometimes" and i was never trying find out when this happened (or why). now correct?
Help
Ok, guys, there has to be a better way to clean out the recently used apps menu. Anyone???
there is a registry hack... anyone????
Use MortScript and create a text file called cleanup.mscr and place the following in there:
Code:
ErrorLevel off
RegDeleteKey HKCU,Software\Microsoft\Shell\TaskSwitch,1,1
Place this file in \Windows\StartUp and it will clean up the Recent Menu Items in the Start Menu at every reboot.
big thanks!
do you happen to know the reg location of "recent programs" listed in "start"?
Delete the string entries in HKEY_CURRENT_USER\Software\Microsoft\Shell\TaskSwitch then soft-reset. That'll get rid of the recently used app list on the Start Menu.
I have been using the attached file since I had my Wizard and it works great on my Kaiser too! Just put the "startclean.exe" in your "\windows\startup" folder and it will remove the most recently used apps from the menu after each soft reset.
Someone posted this file a long time ago and I can no longer find the thread.
Use this program !!
http://mobile-sg.com/software/?p=ClearTemp&platform=ppc
soft reset is OPTIONAL !!
Maybe I am overlooking something... but, is there a way to permanently prevent recently used applications from showing up in the Start menu?
Thanks!
Hi Guys,
I've a problem with Spb Pocket Plus and with the default settings of my TyTN II.
I'll try to explain, because my ROM is in italian and I don't know how to translate them in english.
So, these are the facts:
I've installed the Trial version of Spb Pocket Plus 4.0.1 and I've checked the option to override the default X close button as you can see in pc_capture1.jpg.
Then I deselected it and reenabled from Settings - Buttons the two default items as you can see in pc_capture2.jpg.
But as I can try on my device, after a soft-reset, I can't see in the upper right of the screen the item that can let me choose to see and eventually close the applications running on the device pc_capture3.jpg
Now my question is: what is the registry key that I have to (re)set so I can reenable that functionality overriding that ugly settings from Spb Pocket Plus (that I've deinstalled but without success in resetting the item I need)?
Yes, I know it's difficoult to understand that pictures that are in italian, but if someone can help me, I'll be glad with him/her.
Bye,
ghale.
I know this dosen't really help because you seem to be talking a different avenue than I did... but I had to totally uninstall to get the HTC X back. There is a CAB for the HTC task manager that you might install and see if it over rides the SPB settings...?
Sorry.
If you have both Pocket Plus and the HTC Close Button app running at the same time, your results aren't likely to be good. Either disable the Close Button in Settings, or shut down PP's close button in it's settings, and then soft reset. If that doesn't work, remove Pocket Plus (your settings should be preserved) and reinstall.
Done.
I've the same problem.
Thanks, btw.
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Simply means that the problem was NON solved.
So I've reinstalled Spb and I'm trying to use the Spb method to close the application, instead of the HTC one.
I've tried also to install the HTC Task Manager, from 1.51 to 2.00, overwriting the ROM files, too, but without success.
I've tried a lot of time, but no solution.
If someone has other info, please let us know.
Bye,
ghale.
PerfAlbion said:
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Click to expand...
Click to collapse
Go to settings - system - task manager - button and make sure both boxes there are unchecked. I run Pocket Plus (3.2 upgraded recently to 4.0) without an issue. If that doesn't resolve the problem, it may be something else you're running.
You might try posting your question(s) on the SPB forums. Mods there are most responsive to issues, especially with newly released versions of their software.
http://www.spbclub.com/forum/
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
I didn't find anything about this in the forum and I was hoping that someone could help me. Basically I soft resetted my device (used the stylus and hit the deeply embedded button) but when it booted up, it ran the setup that it does when you first turn on the phone or if you do a hard reset. I mistakenly ran through the calibration and finally it booted up with the bloatware and original settings. The weird thing is, all my files and programs are present but all my registry has been reset. Also I cannot open SKTools, the latest program that which I installed. But, this didn't happen right after I installed it. It was after a couple of days.
I did however accidentally selected "restore settings to default" or something like that under "Tune up!" in SKTools. But this weird hard-reset paradox didn't happen right after I did that. It was much later. So it may or may not be the cause of this. Also I cannot seem to open SKTools but I can open everything else that doesn't require any registry... =[ Also, some app files are missing but some things are left like shortcuts? I'm not really sure...
At least my contacts, calendar reminders, and everything else is still saved.
btw I do not have a backup file or anything (yeah I know I gotta) but I guess I was careless ='[...
Someone please help, is there a way I can restore it- maybe an automatic restore image is hiding somewhere???
I am a normal user with pretty ok hang on general computing, but I got in way above my head. I sincerely hope someone will give aid.
Originally I was just looking for a way to 1) get my "tasks" to show on the HTCs interface start screen together with calender appointments and a way to record my phonecalls.
During my search I found some tweak-pack that did lord knows what. Among other things it added the options to record phonecalls, but only in wav and on main memory though.
Unfortunately it also made manila work in landscape mode, which I dont like. It flips over everytime I tilt my phone the slightest and I see no use for it actually.
I then downloaded some registry editor and tampered with some "enable landscape" setting under local user/software/manila and changed the value to false". After rebooting my phone still tilts and I cant find the command anymore in the registry. What did I do wrong?
I even uninstalled the tweak pack, which just made the record option dissapear again but the landscape rotating persists.
I also realized that adding the command again is easier said than done. Appearntly it takes much more than just writing it as I need to insert strings, dwords and whatsnot, and I have absolutely no clue about what is what.
Now Im even worse out than before. I have no record option any more, and the manila interface is still tilting. I still havent found a tweak or app that can add tasks to the manila homescreen.
Can someone help me disable the landscape rotaing, point me to a crash course for "phone-tampering illeterals" or recommend some way to get the two sought for features? Especially the call-recording preferably to memcard and mp3 is highly needed. First priority is to stop the screen from tilting though.
Oh please.. Help me out /cry..
about the manila rottion u can disable it by using td2 tools 3 in this thread http://forum.xda-developers.com/showthread.php?t=536410
sadly that is only what i can help
hard reset your phone and that's it
came99 said:
I am a normal user with pretty ok hang on general computing, but I got in way above my head. I sincerely hope someone will give aid.
Originally I was just looking for a way to 1) get my "tasks" to show on the HTCs interface start screen together with calender appointments and a way to record my phonecalls.
During my search I found some tweak-pack that did lord knows what. Among other things it added the options to record phonecalls, but only in wav and on main memory though.
Unfortunately it also made manila work in landscape mode, which I dont like. It flips over everytime I tilt my phone the slightest and I see no use for it actually.
I then downloaded some registry editor and tampered with some "enable landscape" setting under local user/software/manila and changed the value to false". After rebooting my phone still tilts and I cant find the command anymore in the registry. What did I do wrong?
I even uninstalled the tweak pack, which just made the record option dissapear again but the landscape rotating persists.
I also realized that adding the command again is easier said than done. Appearntly it takes much more than just writing it as I need to insert strings, dwords and whatsnot, and I have absolutely no clue about what is what.
Now Im even worse out than before. I have no record option any more, and the manila interface is still tilting. I still havent found a tweak or app that can add tasks to the manila homescreen.
Can someone help me disable the landscape rotaing, point me to a crash course for "phone-tampering illeterals" or recommend some way to get the two sought for features? Especially the call-recording preferably to memcard and mp3 is highly needed. First priority is to stop the screen from tilting though.
Oh please.. Help me out /cry..
Click to expand...
Click to collapse
Unfortunately if you tampered with the registry and did not save a backup, you will need to hard reset to get it back.
As Mohamed stated, TD2Tools will fix your rotation issue.
As far as incall recorder, here's the cab but you'll have to search on how to configure it.
I have not used it, so I cannot verify its functionality.
**Also, please edit your title to remove profanity, as it can only be implied here.... **
Hi,
I can verify- it works.
I use it and Resco Audio Recorder (paid) to record it in format i want (MP3 too) and there i want (phone or memory card)
1. Hard Reset
2. Install a ROM which has option to record a call
Thanks for the help guys. I never tried installing roms. Is there a list somewhere and some instructions on how to do it? Is it reversable without loosing everything on your phone?
With the tools recommended earlier will fix the rotation, the worst problem is averted. I still hope for some way to get a todo-list on my main screen without the cost of uninstalling Manila. But maybe thats not possible?
came99 said:
Thanks for the help guys. I never tried installing roms. Is there a list somewhere and some instructions on how to do it? Is it reversable without loosing everything on your phone?
With the tools recommended earlier will fix the rotation, the worst problem is averted. I still hope for some way to get a todo-list on my main screen without the cost of uninstalling Manila. But maybe thats not possible?
Click to expand...
Click to collapse
Read the wiki for flashing for newbies.
It is not reversable and you will loose all your data as well as your warranty if you screw it up.
Not many have been able to flash HardSPL lately which is the precursor to flashing a ROM so good luck with that, you'll probably end up having to pay for it, but it is well worth it.
All questions about flashing should be direct to that thread for maximum exposure and make sure to search and read first before you ask.
There are options on your current ROM to install a Second Today program and toggle between Manila and 2nd Today where you can add your todo list.
Note: not every registry hack is restorable by a hard reset.