S2U2 and Voice Dialer - Tilt, TyTN II, MDA Vario III General

I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.

which device?
which ROM?
which voice dial app?

smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626

The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.

Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.

NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C

Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse

Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos

I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?

Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM

bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.

Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.

LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.

Just saw this, and now it won't lock on it's own now that I did the regedit.
???

CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.

smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.

CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....

Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.

CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.

Related

Remap Soft Keys on the Kaiser

Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
MACkjam said:
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
Click to expand...
Click to collapse
advanced config tool
http://duttythroy.lives-in.eu/
SoftKey Changer
There you go.. Install, soft reset, and its under Start -> Settings -> System
I gave it a try but my expectations were that would be what that soft key would be no matter what program I'm in, but that is not the case. I guess I'll use somethign else like AE Button to get teh keys I want.
Thanks for the post though.
[EDIT]
By the way, after uninstalling, the button assignments remain. Interesting.
Yep use AE Button. It's an amazing tool! Although be careful what you change as it can mess up your device used carelessly.
duncstar said:
There you go.. Install, soft reset, and its under Start -> Settings -> System
Click to expand...
Click to collapse
Thanks very much. I will give this a try.
In the meantime I had to restore a previous version from SPB Backup and this got sorted. I have decided not to re-install Pocket Informant 8 as it caused some isues with ringtones and performance.
I put this on my HTC Tilt and it works awesome, exactly what i was looking for to change the two soft keys.
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
RunsHouse said:
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
Click to expand...
Click to collapse
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
modestmelody said:
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
Click to expand...
Click to collapse
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
Worked perfectly. Thanks.
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
That's it! *Real* new sms Thanks!

I think my Kaiser doesnt like me. Please help

Hello all!
I have a question about some issues I am having and I am wondering if they are common and can be fixed or I am making a mountain out of a mole hill.
I am running Dutty's DualTouch Rom v4 (which is awesome BTW) on a AT&T Tilt
but I have some issues I am running into:
1. When I type @ I get ! and when I type ! I get @, is this a common thing? it also happens with other keys that I am still finding out about. Can I remap the keys to be correct? Will Shaps Advance config 1.1 do this for me or I am misunderstanding that program?
2. On the home screen from the HTC Home plugin if I go to mail it opens up Outlook just fine, then I go back to the home and check my SMS and it brings it up fine. But when if I check my mail again it defaults to the SMS folder and I have to change it every time to Outlook, is there a fix for this?
3. Touch FLO is always different, if I swipe left I will get contacts. If I swipe left again I might get contacts but I might get something else, I have tried it many times and almost every time its different. Is there a way to make it so whenever I swipe left it always beings up the same thing?
4. If I want to change the Splash screen, do I need to put HardSPL on again and then flash it? or can I just do it now that I have Dutty's on there?
Thanks!
mlabate said:
1. When I type @ I get ! and when I type ! I get @, is this a common thing? it also happens with other keys that I am still finding out about. Can I remap the keys to be correct? Will Shaps Advance config 1.1 do this for me or I am misunderstanding that program?
Click to expand...
Click to collapse
I might be wrong, but I think that is fixed by Tilt keyboard fix.cab (search forums for it).
mlabate said:
2. On the home screen from the HTC Home plugin if I go to mail it opens up Outlook just fine, then I go back to the home and check my SMS and it brings it up fine. But when if I check my mail again it defaults to the SMS folder and I have to change it every time to Outlook, is there a fix for this?
Click to expand...
Click to collapse
I thought KaiserTweak has a setting as to what should open up when messaging/email is opened. KaiserTweak is a sticky in this forum.
mlabate said:
4. If I want to change the Splash screen, do I need to put HardSPL on again and then flash it? or can I just do it now that I have Dutty's on there?
Click to expand...
Click to collapse
You might want to confirm it, but I think once you've done HardSPL, you can flash splash screens whenever you want.
DarkDvr said:
I might be wrong, but I think that is fixed by Tilt keyboard fix.cab (search forums for it).
I thought KaiserTweak has a setting as to what should open up when messaging/email is opened. KaiserTweak is a sticky in this forum.
You might want to confirm it, but I think once you've done HardSPL, you can flash splash screens whenever you want.
Click to expand...
Click to collapse
I had that saved from before (keyboard fix) I ran it once then I re-flashed and forgot to do it again, I thought that was only good if your keyboard didn't respond to anything at all, I didn't know it helped for that also. I guess I missed KaiserTweak, I will give it a shot.
KaiserTweak has Tilt keyboard fix as far as I remember.
Besides that, there is a Tilt keyboard fix.cab which solves exatcly that - improper key assignment..
I hope you flashed hard spl before you flashed dutty's rom anyway...
Yeah I did use HardSPL and it was successful.
I understand what it does, but once I flashed to dutty's wouldn't it not matter anymore? Or is there a reason done the road that I need it?
Thanks

PointUI to replace Today Screen

When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
grandpareza said:
When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
Click to expand...
Click to collapse
I myself have been trying to find a way to completely replace the Today screen with PointUI, but without any success. So I ended up throwing together this little piece of software.
It is called GetPointUI and is basically a Today plugin, which acts similar to the SPBWatcher plugin. If PointUI is not running, it will start it, and if PointUI is running, it will activate it as soon as the Today screen becomes visible. To deactivate GetPointUI, simply uncheck the plugin in the Today settings.
Now, mind you, I have only tested this application on my XV6800 (and it is working perfectly) with PointUI installed in the default location. I do not have S2U and/or any other launchers/Today replacements installed, so GetPointUI might interact with those in an undesired way. If you should have PointUI installed in a non-default location, GetPointUI SHOULD be able to detect that and find the correct path, but this has not been tested. The same goes for new versions of PointUI that might be released in the future. GetPointUI SHOULD always bring up the latest version, but again, that is pure theory. I am curious myself...
Installation: Just install the attached CAB and soft-reset your device.
NOTE: I will NOT be responsible for any damage on your device or any data loss you may incur. You are using this software at your OWN risk.
Unfortunately, that CAB file you posted won't install. No error, just "Unsuccessful"
here this may have fixed it
Perfect. Thanks guys. Since the time of posting (January), pointui has created a feature where you can choose to replace the Task Bar/Start Bar with the pointui task bar. Touching this "pointui task bar" takes you back to the home screen and at another location on the bar it gives you the "Running Applications"
Thanks again guys. Much appreciated.
kidnamedAlbert said:
here this may have fixed it
Click to expand...
Click to collapse
Thanks kidnamedAlbert. I should have noticed that.
mimpoca said:
Thanks kidnamedAlbert. I should have noticed that.
Click to expand...
Click to collapse
yeah no problem
Still not working for me. Any suggestions?
getpointui not tinstalling
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
hello,
i tried this .cab on PPC 2000SE - it installs - but nothing happens
- no new plugin
- going to today (and stay there) is still possible.
is there a way to make this work on 2003SE ?
thank you!
GetPointUI not installing...
chrisaba1 said:
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
Click to expand...
Click to collapse
I have an HTC S640 with Windows Mobile 6, I get the same error...will not install. Without this app, PointUI although very slick, without it beeing able to work like this its just eye candy....
If anyone has this working, please POST!!!!!
i know this is off the topic, but does anyone know if POINTUI is still in production for a new release?
it is true there are bugs in pointui, but free is free.. for the most part, POINTUI is a excellent all in one interface, simple, basic and fast...
tvos

Bad GPS fix and QuickGPS

A lot of people here have problems with their windows 6.1 and GPS. It seems some people have more problems than others, but someone on this forum has found a registry setting which solves my problem. At least until I soft reset my device, this causes the registry setting to go back to standard.
I’m talking about this post:
mavado said:
This solution helped for me:
The problem was in the registry of QuickGPS.
I changed the region settings of my PPC to Dutch, but QuickGPS doesn’t get this settings. So I assume it’s downloading the wrong GPS information.
After I changed the following registry setting I had a fix almost immediately :
[HKLM] - Software\HTC\QuickGPS\region changed from -- to NL
After using GPS Test I got a fix very fast.
Using:
Kaiser
OS DCS 1.4 WM6.1
R 1.64.06.04
Click to expand...
Click to collapse
Believe it or not but this works for me as I live in Holland but I think this could work for everyone who has problems regarding 6.1 and GPS no matter what radio you use. All we have to find out what the region codes are.
But this is a temporary fix, as I said soft-reset causes the setting to jump back to ‘--’ again and GPS is very slow whit the fix. Is it possible to create some sort of cab file or setting to set the region setting in the registry to user settings at reboot or wake-up? Or is altering QuickGPS also possible? If someone could point me in the right direction I would be very grateful.
spaanplaat said:
A lot of people here have problems with their windows 6.1 and GPS. It seems some people have more problems than others, but someone on this forum has found a registry setting which solves my problem. At least until I soft reset my device, this causes the registry setting to go back to standard.
I’m talking about this post:
Believe it or not but this works for me as I live in Holland but I think this could work for everyone who has problems regarding 6.1 and GPS no matter what radio you use. All we have to find out what the region codes are.
But this is a temporary fix, as I said soft-reset causes the setting to jump back to ‘--’ again and GPS is very slow whit the fix. Is it possible to create some sort of cab file or setting to set the region setting in the registry to user settings at reboot or wake-up? Or is altering QuickGPS also possible? If someone could point me in the right direction I would be very grateful.
Click to expand...
Click to collapse
After thinking about this on my way to work, I came across the fact that since I use KaiserTweak it will set the default QuickGPS settings back, which of course has its region set to "--". So i'm assuming that's why when you reset your phone thats why it resets your settings again
XML file
kjb86 said:
After thinking about this on my way to work, I came across the fact that since I use KaiserTweak it will set the default QuickGPS settings back, which of course has its region set to "--". So i'm assuming that's why when you reset your phone thats why it resets your settings again
Click to expand...
Click to collapse
Then I will look into the kaisertweak’s XML file and try to remove the QuickGPS settings and see if it works. Will keep you guys updated.
edit: Okay, this does not make any difference. So we have to find a way to set the user setting on every wake-up or boot. Does anyone know how to do this?
edit: Thought I had the answer, turns out... I didn't
spaanplaat said:
edit: Thought I had the answer, turns out... I didn't
Click to expand...
Click to collapse
what do you mean "BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON."???
kjb86 said:
what do you mean "BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON."???
Click to expand...
Click to collapse
No I found that answer using search, but doen't work with kaiser
QuickGPS runs as a service (a very annoying one if you don't disable the audio & popup and vibrate notification immediately ).
Have you killed QuickGPS via task manager before editing the registry and then soft resetting? (I use dotfred's, best task manager + utils proggie out!)
If the application is re-writing the registry constantly with the settings it started with, then that may be the reason why editing the settings doesn't work and why it also doesn't stick.
Give that a try...
Hope this helps!
_Alex_ said:
QuickGPS runs as a service (a very annoying one if you don't disable the audio & popup and vibrate notification immediately ).
Have you killed QuickGPS via task manager before editing the registry and then soft resetting? (I use dotfred's, best task manager + utils proggie out!)
If the application is re-writing the registry constantly with the settings it started with, then that may be the reason why editing the settings doesn't work and why it also doesn't stick.
Give that a try...
Hope this helps!
Click to expand...
Click to collapse
Hi _Alex_,
Thanks for your input.
I did try that, but unfortunately it still does not keep the same settings.
What I did was soft reset, change registry, soft reset - Then I had noticed that it kept the settings, but then I did a complete shut down and power up and then again, registry settings were back to '--"
I'm using the standard ATT ROM and the wierd thing for me is that I used the GSP (TomTom) on Tuesday with no issues. I tried to use it today and am unable to connect at all to the GPS via TomTom, Google Maps, or QuickGPS.
kjb86 said:
Hi _Alex_,
Thanks for your input.
I did try that, but unfortunately it still does not keep the same settings.
What I did was soft reset, change registry, soft reset - Then I had noticed that it kept the settings, but then I did a complete shut down and power up and then again, registry settings were back to '--"
Click to expand...
Click to collapse
But did you kill QuickGPS before editing the registry and proceeding to the soft reset? It runs as a hidden service, which is why I recommend using dotfred's task manager, because the standard HTC task manager might not show it running.
_Alex_ said:
But did you kill QuickGPS before editing the registry and proceeding to the soft reset? It runs as a hidden service, which is why I recommend using dotfred's task manager, because the standard HTC task manager might not show it running.
Click to expand...
Click to collapse
ahhh
No, still did not work. But thanks for trying, and yea that task manager shows a lot of programs that you can't see running
If you use Alexs kitchen, i think you can edit the Rgu file under region to reflex where you are and cook the package back into your rom and it would always reflex the region you choose?
I've not tested it, but would a MortScript in the startup folder not do the job?
I made a little MortScript and added it to startup:
Code:
While (1)
Sleep (60000)
If NOT regKeyEqualsString ("HKLM", "Software\HTC\QuickGPS\", "region", "SE")
RegWriteString ("HKLM", "Software\HTC\QuickGPS\", "region", "SE")
EndIf
EndWhile
This works and keeps the "SE"-setting (for Sweden), but having the script running constantly isn't exactly optimal as it uses processing power and thus adding to battery-drain. Anyone have any ideas on a different way of making the script, which is more effective/power-saving? Or is there an even better way to make the registry key stick?
Hi all, after reading numerous articles about how to fix my issue with GPS, I've managed to find a fix using the UK radio rom compatible with Dutty's 6.1 rom. What I found out was the my first lock always never locked or took forever. So, what I did was go to the registry and left the key:
"HKLM", "Software\HTC\QuickGPS\", "region" to "--"
Then for the first time, after a hard-boot, (power off/on), I had to do this once:
1. Start up GPSTool
2. Change the setting to "Warm Start" and click "open".
3. Leave the app running and open up my TOMTOM application.
4. Give it about a minute or two and then it would lock, no problems.
5. I then, exited out of TOMTOM and closed the GPSTool.
So, for the next time I need to start a GPS, enabled tool, I would just start it up and no problems, it locks right away, until the next hard-boot. Then I would do this again. Kinda stinks, but this was the ONLY working solution for now because I don't feel like flashing my phone again. I have many apps installed and it takes forever to reinstall everything. Hope this was helpful for some people. Enjoy!
--edit
Well, looks like GPSGate fixed another phone... hehe, very happy now!! Thanks all for mentioning the program!
i1135t said:
Hi all, after reading numerous articles about how to fix my issue with GPS, I've managed to find a fix using the UK radio rom compatible with Dutty's 6.1 rom. What I found out was the my first lock always never locked or took forever. So, what I did was go to the registry and left the key:
"HKLM", "Software\HTC\QuickGPS\", "region" to "--"
Then for the first time, after a hard-boot, (power off/on), I had to do this once:
1. Start up GPSTool
2. Change the setting to "Warm Start" and click "open".
3. Leave the app running and open up my TOMTOM application.
4. Give it about a minute or two and then it would lock, no problems.
5. I then, exited out of TOMTOM and closed the GPSTool.
So, for the next time I need to start a GPS, enabled tool, I would just start it up and no problems, it locks right away, until the next hard-boot. Then I would do this again. Kinda stinks, but this was the ONLY working solution for now because I don't feel like flashing my phone again. I have many apps installed and it takes forever to reinstall everything. Hope this was helpful for some people. Enjoy!
--edit
Well, looks like GPSGate fixed another phone... hehe, very happy now!! Thanks all for mentioning the program!
Click to expand...
Click to collapse
I don't understand the link between:
- the registry key "HKLM", "Software\HTC\QuickGPS\", "region"
- and what you said about GPSTool
In the end how do you solve the problem with the region ?
Chris
The GPSTool is built into the Dutty's 6.1 ROM. Don't get that confused with the GPSGate application. They are two seperate apps.
In order for this to work, I set had to set my the registry entry "region" from "US" to "--". The full path location is listed above. I think when I ran the QuickGPS utility, it set my region to "US" in the registry. You will have to regedit it back to "--" then try what I did, or it may not work. It didn't for me until I changed it back to default, which is "--". I remember reading somewhere here that a "warm boot" was clearing the RAM within the GPS hardware, so I played around with the idea of it running, while starting up a GPS enabled application and got it to work.
But I eventually decided to use the GPSGate application which solved my problem, without having to run the GPSTool method. Note that I got a quicker lock, after regediting the region area back to "--" and running the GPSGate application. Usually the first lock would never happen or take well over 10 min. Now, the first lock is with 1-2 min. which is fine for me and every subsequent time I need to use a GPS enabled application, it would lock right-away, within seconds, until the next hard-boot (power off/on). Hope that clears things up a little.
i1135t said:
The GPSTool is built into the Dutty's 6.1 ROM. Don't get that confused with the GPSGate application. They are two seperate apps.
In order for this to work, I set had to set my the registry entry "region" from "US" to "--". The full path location is listed above. I think when I ran the QuickGPS utility, it set my region to "US" in the registry. You will have to regedit it back to "--" then try what I did, or it may not work. It didn't for me until I changed it back to default, which is "--". I remember reading somewhere here that a "warm boot" was clearing the RAM within the GPS hardware, so I played around with the idea of it running, while starting up a GPS enabled application and got it to work.
But I eventually decided to use the GPSGate application which solved my problem, without having to run the GPSTool method. Note that I got a quicker lock, after regediting the region area back to "--" and running the GPSGate application. Usually the first lock would never happen or take well over 10 min. Now, the first lock is with 1-2 min. which is fine for me and every subsequent time I need to use a GPS enabled application, it would lock right-away, within seconds, until the next hard-boot (power off/on). Hope that clears things up a little.
Click to expand...
Click to collapse
Hmm good solution now its takes less than a min to start tomtom. thanks.
Is this problem in all wm6.1 roms....Im certain that this is the issue with mine as once i downloaded data my fix was much more rapid then without (1.5-2.5mins, no tall buildings around clear line of sight). Any wm6.1 not have this issue??
i1135t said:
But I eventually decided to use the GPSGate application which solved my problem
Click to expand...
Click to collapse
What exactly is it that GPSGate does to solve the problem? Any specific settings you need to apply in GPSGate?

NoSleep!!.CAB - Stops the screen blanking during calls - WORKS!! [02/08/2008]

Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Can you explain what´s in that cab?
shinobi_uk said:
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Click to expand...
Click to collapse
Nothing new here...
You could also easily do it with Diamond Tweak
MonteCristoffOn said:
Nothing new here...
You could also easily do it with Diamond Tweak
Click to expand...
Click to collapse
Actually i found that using DT didn't work either, and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
horstborsch said:
Can you explain what´s in that cab?
Click to expand...
Click to collapse
Four registry tweaks, and a text file. Nothing sinister.
shinobi_uk said:
Actually i found that using DT didn't work either
Click to expand...
Click to collapse
It works for everybody... even on all bepe's ROMs.
and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
Click to expand...
Click to collapse
If so, good luck for making cab for each Diamond tweak...
Cheers.
MonteCristoffOn said:
It works for everybody... even on all bepe's ROMs.
Click to expand...
Click to collapse
Well i applied the tweaks and my screen still went blank when calls connected, I'm happy to test it again as I may have been using an older version.
If so, good luck for making cab for each Diamond tweak...
Cheers.
Click to expand...
Click to collapse
Well actually it's been very easy to achieve by taking registry snapshots, and then using diff on a linux box to find the changes, then import them into a cab file.
So thanks for wishing me luck but it's not required.
Sarcasm breeds sarcasm and frankly i'm slightly ammused that on a forum designed to help users share tips and software, a simple CAB i use after new ROM flashes has created such a hostile response.
I'm not attempting to replace or belittle your tool monte, it's certainly streets ahead of what i can do at the moment, however as bepe's ROM lets me run cabs at build this way is nice and easy for me to ensure that if I need to do a hard reset I can reinstate my registry tweaks during the reset without having to install any additional software.
What's so bad about the screen blanking out during a call?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
The registry tweaks in Advanced Config did not work on my phone either, but this cab did the job. Thanks shinobi_uk
THIS is effing amazing
Been looking for something like this for a looong time, cheers
Brilliant, I'd tried the registry tweaks in the tweaks thread, and advancedconfig without any luck and this cab worked perfectly.
I haven't tried DiamondTweak, looks interesting though.
This works perfectly. Big Thanks!
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
Have you tried to dial a requested code with a blank screen?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
It's not that bad, it just annoys me when I'm phoning numbers where you have a number menu system to get through.
It's strange that it's something no other WM phones I've used have done, yet theres no menu option to disable it.
shinobi_uk said:
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
Click to expand...
Click to collapse
here here...me too
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
If you'll think about it for a moment, during a call we never really need the screen to be active for more than 1 minute or so, from the last time we touched it. If you are calling a digital voice machine (either your voicemail or anything), 99.999% of the time it won't take more than 1 minute between key presses.
The ideal tweak should just make the screen behave like when you're not in a call, meaning the screen reduces brightness after ~30 seconds, and shuts down after ~1 minute. In order to be 100% on the safe side, you could make it shut down after 2 minutes from last key press. BUT, making it never go to sleep is simply a waste of battery if you're doing for example a 30 minutes conversation.
center button and screen back on
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
But i dont think we should discourage anyone from making any kind of cab if they desire.
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
Click to expand...
Click to collapse
Still, it is unnoying to press that damn key every 5 seconds. The screen should shut down after 1-2 minutes, but NOT never.
Noam23 said:
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
Click to expand...
Click to collapse
Thats abosolute BS. It is NOT flawed. If you dont want your screen to stay on just - dont use the CAB. I think most users around here are smart enought to know that keeping the screen on during a call takes a battery hit. If they use the CAB as I intend to they are willing to accept this.

Categories

Resources