Related
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
MACkjam said:
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
Click to expand...
Click to collapse
advanced config tool
http://duttythroy.lives-in.eu/
SoftKey Changer
There you go.. Install, soft reset, and its under Start -> Settings -> System
I gave it a try but my expectations were that would be what that soft key would be no matter what program I'm in, but that is not the case. I guess I'll use somethign else like AE Button to get teh keys I want.
Thanks for the post though.
[EDIT]
By the way, after uninstalling, the button assignments remain. Interesting.
Yep use AE Button. It's an amazing tool! Although be careful what you change as it can mess up your device used carelessly.
duncstar said:
There you go.. Install, soft reset, and its under Start -> Settings -> System
Click to expand...
Click to collapse
Thanks very much. I will give this a try.
In the meantime I had to restore a previous version from SPB Backup and this got sorted. I have decided not to re-install Pocket Informant 8 as it caused some isues with ringtones and performance.
I put this on my HTC Tilt and it works awesome, exactly what i was looking for to change the two soft keys.
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
RunsHouse said:
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
Click to expand...
Click to collapse
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
modestmelody said:
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
Click to expand...
Click to collapse
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
Worked perfectly. Thanks.
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
That's it! *Real* new sms Thanks!
Anyone else got this... Every time i open a message it seems to default to the bottom of the message... i.e. a blank screen. So I have to scroll up to the top of every message i get!
How do i fix this!? its really annoying!
I have the same problem... I think it is rom specific though... I am using WM6.1...Sleuth V3
It's a registry hack issue. Install Kaiser Tweaks and disable the D-Pad scrolling.
If you are using Kaisertweak, make sure you have the D-Pad Scroll Navigation set to default.
fantastic - thanks
when i installed KaiserTweak i basically just put everything onto it's advised setting
Which option is it? I cant find it in KaiserTweak.
CorruptedSanity said:
Which option is it? I cant find it in KaiserTweak.
Click to expand...
Click to collapse
In KaiserTweak Collapse all the trees one by one until you get all the way down to PocketIE. In there set D-Pad Scroll Navigation back to Disabled.
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
duke911 said:
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
Click to expand...
Click to collapse
Perhaps you should read the actual issue again, cos you're talking about something else
oh, my bad...
knwoing this is the isuue, it happens with me also sometimes
Thanks
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
KaiserTom said:
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
Click to expand...
Click to collapse
Hey guys,
I'm experiencing the same thing with a Helmi AKU 3.5 ROM that I've put on my Universal. I know that KaiserTweak is for the....Kaiser, but I was wondering if anyone knew exactly which registry hack to change to "disable DPad scrolling". I read in one of these posts that it was under the PocketIE settings, and I do know that my PocketIE has been hacked to support "high resolution mode", so maybe this is what is causing my issue (although I've found nothing about the setting in IE itself).
If anyone can enlighten me (probably with a Registry setting), even if you've already 'fixed' your Kaiser, I would appreciate it immensely, as this small issue is slowly driving me nuts!
Thanks in advance all,
-scar
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
it cant be this simple...
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
closet410 said:
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
Click to expand...
Click to collapse
Connect device to PC. Use Active Sync to move the (unopened/unextracted) CAB file to your device (storage card or if not main memory).
Then on the device use file explorer to find the CAB and tap on it to install it. Choose install to main memory for this CAB.
AND follow above posters advice to ensure the plugin is set to show on the Today Screen.
Mike
not that simple
jymbrittain said:
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
Click to expand...
Click to collapse
already done that.
ditched the original link and downloaded schen's version on these very forums. so far so good!
look for schen's HTC Home at pocketemu.com. Then download HTC Home Customizer from the same Link and use it to customize your HTC Home.
weather
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
closet410 said:
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
Click to expand...
Click to collapse
2 ways
HHC can do it for you under one of its tabs
or
Go to the weather tab on HTC Home, tap on your city name and change it from the Menu option corrosponding to the right soft key.
Play around with it first and see if you can figure things out.
I downloaded the home plug and schen's cab, but the today screen only appears as the HTC home plug should appear. I tried reinstalling the cab file, but nothing changed. I can't find it under settings.
:EDIT:
I'm not even gonna bother deleting my previous post here. That was dumb of me. I thought I was to look around in the settings... Then I checked programs. You may now bash.
Screen not responding to the stylus?
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Have a screen protector??? May need to adjust the sensitivity. Don't have the exact key, but I know it's in several posts. try filtering your search with the term pressure threshold.
No, it happened to me today too
Tilt w/Duttys latest.
I was reading email, when suddenly the touch screen stopped working. I could use the DPad, but no response to touch. Opened and closed the keyboard, still no response. Soft booted and it went back to normal.
I have had it happen 2 or 3 times on my tilt with dutty previous release. Rebooted and it went back to normal.
The problem is usually related to FTouchFlo, a simple soft reset cures the issue. If you don't have FTouchFlo installed, I'm not sure what could be causing it
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Me too!!!
closet410 said:
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Click to expand...
Click to collapse
Check out this thread. http://forum.xda-developers.com/showthread.php?t=337979
I did everything in it, but sometimes my screen stops and freezes for a few seconds. Sometimes it gets so bad that it freezes like every 20 or 30 seconds when I am typing something using the stylus. I don't think I have touchflow because I never installed it. I just have the stock HTC rom.
Any ideas greatly appreciated.
fone_fanatic said:
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Click to expand...
Click to collapse
same here. i removed touchflo all together
i got it working again. just had to realign the screen.
What we browser are you using?
I have an att tilt so i have internet explorer mobile and im not really feelin it to much. what browser are you guys using?
many people like the latests beta opera mobile
Hi i have a kaiser on Uk orange. the right soft key says 'Go To ...' ttry as i may i can not change it at all. i have tried FdcSoft SoftkeyAppletEx, Key swop, Advanced Config and even editing the registry at Hkey_current_user\software\microsoft\today\keys\113 (where they have two extra keys called 'mem1' and 'mem2'.) however whichever method i try the key always resets itself back to 'Go To'
Does anyone have any ideas how i can try and change it at all?
Cheers
edblack said:
Hi i have a kaiser on Uk orange. the right soft key says 'Go To ...' ttry as i may i can not change it at all. i have tried FdcSoft SoftkeyAppletEx, Key swop, Advanced Config and even editing the registry at Hkey_current_user\software\microsoft\today\keys\113 (where they have two extra keys called 'mem1' and 'mem2'.) however whichever method i try the key always resets itself back to 'Go To'
Does anyone have any ideas how i can try and change it at all?
Cheers
Click to expand...
Click to collapse
Thats strange, I always use advanced config for that and its working like a charm.
if youur on orange chances are youve got that crappy side bar on. go to settingsstart - settings - today - go to the second tab laballed ITEMS then untick the orange item. when you go back to your today screen contacts should be on the right
Yeah that did it cant believe how long it has taken to find that out, however is there any way i can get the sidebar back (not necessarily that one but an alternate one) as its really useful to have that stuff on the screen.
edblack said:
Hi i have a kaiser on Uk orange. the right soft key says 'Go To ...' ttry as i may i can not change it at all. i have tried FdcSoft SoftkeyAppletEx, Key swop, Advanced Config and even editing the registry at Hkey_current_user\software\microsoft\today\keys\113 (where they have two extra keys called 'mem1' and 'mem2'.) however whichever method i try the key always resets itself back to 'Go To'
Does anyone have any ideas how i can try and change it at all?
Cheers
Click to expand...
Click to collapse
Try this one mate, letme know how it works out for you
raiisik he sorted the soft key out
you might want to consider the htc home plugin it shows time sms phone links to other apps and it customisable
look on the wiki page for more information
edblack said:
Yeah that did it cant believe how long it has taken to find that out, however is there any way i can get the sidebar back (not necessarily that one but an alternate one) as its really useful to have that stuff on the screen.
Click to expand...
Click to collapse
Oh, solved. Didnt see that one, slow read/typer I guess Well if someone else need to remap that is an exelent app for it
jayjay8585 said:
raiisik he sorted the soft key out
Click to expand...
Click to collapse
Yeh I saw and comment it
jayjay8585 said:
you might want to consider the htc home plugin it shows time sms phone links to other apps and it customisable
Click to expand...
Click to collapse
I am deffently not following here mate?
jayjay8585 said:
look on the wiki page for more information
Click to expand...
Click to collapse
Why should I read the wiki? I havent done anything wrong have I
raiisak is htc home in you cabs.
jayjay8585 said:
raiisak is htc home in you cabs.
Click to expand...
Click to collapse
I am what? Um, I am slow today but I dont get this. I have some HTC Home cabs yeh but havent released any in my corner. Only thing I have there is a hotfix for Leo`s V9 who was bugging some of the light users thats all.
sorry wait hold up
i was telling the thread starter to read the wiki and i also wanted him to consider htc home for what he now needs. and i was asking you if you have htc home in your corner
jayjay8585 said:
sorry wait hold up
i was telling the thread starter to read the wiki and i also wanted him to consider htc home for what he now needs. and i was asking you if you have htc home in your corner
Click to expand...
Click to collapse
Aha! I follow now, after a cup of coffee and youre explenation its all good
About the HTC Home, no I dont have it in my corner. I have some modified Diamon style tweaked for some of the dialers but havent made a cab of it since there is floating several around in here already. I might whanna have a go skinning one if I come up whit a kewl idea though. I am working on a SPB Theme atm (well not now, vacation atm. But will continue that project once back home), after that I have planned to make a cab/guide whit a nice theme for ultimatelaunch. And I also have promised a icon pack and some animations and on top of that I am eager to get back and work whit Leo on future projects. So it is kinda tight program for hobby timeline, but if you got a certain wish you could request it in my corner and who knows what happends from there and out
cool. it was just to show edblack in the right direction