Anyone else got this... Every time i open a message it seems to default to the bottom of the message... i.e. a blank screen. So I have to scroll up to the top of every message i get!
How do i fix this!? its really annoying!
I have the same problem... I think it is rom specific though... I am using WM6.1...Sleuth V3
It's a registry hack issue. Install Kaiser Tweaks and disable the D-Pad scrolling.
If you are using Kaisertweak, make sure you have the D-Pad Scroll Navigation set to default.
fantastic - thanks
when i installed KaiserTweak i basically just put everything onto it's advised setting
Which option is it? I cant find it in KaiserTweak.
CorruptedSanity said:
Which option is it? I cant find it in KaiserTweak.
Click to expand...
Click to collapse
In KaiserTweak Collapse all the trees one by one until you get all the way down to PocketIE. In there set D-Pad Scroll Navigation back to Disabled.
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
duke911 said:
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
Click to expand...
Click to collapse
Perhaps you should read the actual issue again, cos you're talking about something else
oh, my bad...
knwoing this is the isuue, it happens with me also sometimes
Thanks
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
KaiserTom said:
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
Click to expand...
Click to collapse
Hey guys,
I'm experiencing the same thing with a Helmi AKU 3.5 ROM that I've put on my Universal. I know that KaiserTweak is for the....Kaiser, but I was wondering if anyone knew exactly which registry hack to change to "disable DPad scrolling". I read in one of these posts that it was under the PocketIE settings, and I do know that my PocketIE has been hacked to support "high resolution mode", so maybe this is what is causing my issue (although I've found nothing about the setting in IE itself).
If anyone can enlighten me (probably with a Registry setting), even if you've already 'fixed' your Kaiser, I would appreciate it immensely, as this small issue is slowly driving me nuts!
Thanks in advance all,
-scar
Related
Anyone else? Open a message (any type) and it opens at the bottom of the message, so that I can't see the message or who it's from without scrolling up. It's annoying!
Also, if I use the D-pad to scroll through the messages, each message opens up in the same manner - at the bottom.
Is there a fix for this?
Thanks,
FrankyG
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Mark Crouch said:
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Click to expand...
Click to collapse
Thanks for the reply , twice
Can anyone with a stock TyTN confirm what the default registry setting is?
Thanks,
FrankyG
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
patr!k said:
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
As do I, and I still have the problem after checking my settings. Can someone give us an answer on how to fix this issue?
Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
patr!k said:
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
Click to expand...
Click to collapse
Huh? Could you explain a bit less cryptically?
Thanks a lot for the hint! I love this forum!
I had this problem on my 8525 after flashing one of many ROM's and now have it on my Tilt with stock ROM. When sending a new sms or replying to one, the screen defaults below the address part onto the bottom of the text portion of the screen. I know this is a reg hack that is needed, but for the life of me I can not find it in a search. This was a common problem on the 8525's after a certain ROM upgrade if anyone remembers.
you mean where it cuts off the person's info you are replying to?
Yeah its annoying!
Doesn't cut it out, but when you open the window to reply, it defaults to only showing the text area, and uses the bottom part of the screen as the point that it sets to show. Thus, the top part of the text reply window is off the screen.
And yes, it is very annoying. I gotta find the reg hack to fix this!
As I recall it happens when the reg is set to use the right and left nav buttons to page down when using IE, it causes the sms to open at the bottom of the screen and you have to scroll back.
This question was asked by another Kaiser user.....guess you guys have all been busy flashing ROMs
The answer IS a reg hack, and here's a link to the reply I posted - the OP hasn't responded to say whether the problem is now cured, but if it's the same issue I experienced on my Hermes, the above answer will work.
Post back....I'd like to know if it works (I'll be getting my Kaiser next month, so this will be something to add to the "Tips and Tricks" document I'm compiling from everyone else's posts )
Cheers,
Mark.
My reg value is already set to 1 in this file. So, only option, set to 0 and lets see what happens!
Was just skimming through some threads and stumbled upon this. That problem was driving me crazy but i hadn't gotten to the point of searching for a solution yet.
This worked for me on my Hermes.
Thanks ^_^
Raptor567 said:
Was just skimming through some threads and stumbled upon this. That problem was driving me crazy but i hadn't gotten to the point of searching for a solution yet.
This worked for me on my Hermes.
Thanks ^_^
Click to expand...
Click to collapse
Are you referring to the hack listed in the response above? Because on the Tytn II this value is already set as stated in that thread.
No this is not the same issue the Hermes had when you set the D pad to scroll in IE that issue was the "text curser" would be all the way at the bottom of a screen no matter what cutting off half of emails and what ever else text was sent to you. there is nothing to fix this issue as of now. BUT when I compose a new SMS it ALWAYS starts at the address line not sure why your don't
Hi all,
Not sure what I have done here - but since installing and playing with KaiserTweak when I open and email or SMS message it opens from the bottom of the message - meaning I have to scroll back to the top to start reading it. On some short messages all I get is a blank white screen as it has scrolled down past all the text. Soft reset does nothing to help and I can find no option in KaiserTweak that seems to influence it.
Can anyone help - it is slowly driving me mad!
Thanks, Rich
I have the same problem !
Just Open KaserTweak again, search the D-Pad Scroll Navigation setting and Disable it.
That should resolve your problem
cheers!
Excellent - thanks! Worked a charm...
R
Appears to be a small problem side-effect. In calendar, in agenda view I can no longer go left-right to select the day. Tapping the day on screen also does not change anything.
Tried changing the D-Pad setting back but no luck....still broken.
Anyone got any ideas or suffered the same?
R
What sort of view are you using (day/week/month/year)? Have you also tried to re-align your screen?
Using AGENDA view, I used to be able to use the D-Pad to go left/right. This no longer works. Screen is aligned and I can select one of the days MTWTFSS but it does not change the agenda view below. If I switch to day mode then I can still not use the D-Pad but pressing the day on screen now works....
Apologies for some reason I had day/week/month/year as sub-menu's of the Agenda View. Duh. Anyway, I see what you mean, possibly a stupid suggestion but have you tried a soft-rest since turning d-pad navigation off?
I, too, used D-Pad navigation at some point, but turned it off again, and I am still able to use the D-pad in agenda view...
yeah - have soft reset several times - makes no difference now if the d-pad is set or not - guess I have upset it somehow but how I do not know - was working fine until I disabled the d-pad in kaisertweak this morning to fix the sms message opening problem....
...I feel a hard reset and re-load coming on
R
Hmmm - turned it on this morning and it is fixed???? WEIRD!! Have nto changed, installed, or moved anything. Was broken yesterday - and working today - go figure???
I fixed it with my mind... your welcome
I'm experiencing this problem as well, but I did not install any version of Kaiser Tools. I'm actually using an HTC Universal, updated with an AKU3.3 ROM (check sig for details). I can't remember when or why it started to do this (opening SMS/E-mail at bottom), but it's driving me nuts.
Does anyone know of a registry key that can be changed, or anything else that I can look at? Please let me know if you have any idea.
Thanks in advance all,
-scar
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
MACkjam said:
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
Click to expand...
Click to collapse
advanced config tool
http://duttythroy.lives-in.eu/
SoftKey Changer
There you go.. Install, soft reset, and its under Start -> Settings -> System
I gave it a try but my expectations were that would be what that soft key would be no matter what program I'm in, but that is not the case. I guess I'll use somethign else like AE Button to get teh keys I want.
Thanks for the post though.
[EDIT]
By the way, after uninstalling, the button assignments remain. Interesting.
Yep use AE Button. It's an amazing tool! Although be careful what you change as it can mess up your device used carelessly.
duncstar said:
There you go.. Install, soft reset, and its under Start -> Settings -> System
Click to expand...
Click to collapse
Thanks very much. I will give this a try.
In the meantime I had to restore a previous version from SPB Backup and this got sorted. I have decided not to re-install Pocket Informant 8 as it caused some isues with ringtones and performance.
I put this on my HTC Tilt and it works awesome, exactly what i was looking for to change the two soft keys.
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
RunsHouse said:
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
Click to expand...
Click to collapse
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
modestmelody said:
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
Click to expand...
Click to collapse
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
Worked perfectly. Thanks.
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
That's it! *Real* new sms Thanks!
every 2 or 3 days when my alarm sounds i get no onscreen noticfication to dismiss the alarm, only the symbol in the status bar.
When i look into sounds notification/reminders i see the "display message on screen" box is unchecked again so i recheck it.
What causes this to uncheck itself?
are you experiancing this behaviour or have any insight into the cause?
thanks
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Anyone knows how to disable Missed Alarm Alert (symbol on the status bar) so I don't need to go to status bar console and remove it every morning ?
drdoc said:
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Click to expand...
Click to collapse
I believe i was having this problem before i had installed Diamond TF3D.
The search continues.
Im having the problem on TLR3 ROM and i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
I'm using TF3D Config and also 1.93 ROM but I don't seem to have this issue?
Although I have never used it to apply a 'theme' only, to change date/time format and apply one of the performance tweaks.
Have you guys updated your TF3D config via apptodate and also tried restoring defaults (within TF3D config) and then tried applying your settings again?
i too only use TF3D config to format the date, i have updated it using apptodate.
I may uninstall it and see what effect that has, im not really sure that TF3D is the cause of the problem.
rumpleforeskin said:
i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
Click to expand...
Click to collapse
Yes, I'm on the original 1.37 ROM and am seeing this - bl00dy annoying too as it seems such an odd 'bug'....
Mathew
Had this happen again today, really annoys the wife as i spend time trying get the phone to shut up.
I have made no progress determining the cause, but it does only seem to uncheck the box after a soft reset, but strangley not after every soft reset..... the plot thickens
This problem only happens after i reset the device, but not every time.
As i cant find the cause i was thinking of a way to fix the problem.
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
and i have the values for the box checked and unckecked.
I have been googleing for the past hour but having no luck with what i want to achieve.
I would like to write a batch file to open a reg file that will change the dismiss box registry entry to the checked value, but it seems batch files cannot be run from the windows start up folder.
Im not very technically skilled with programming so could someone more knolegable point me towards the correct way of doing what i desired, which is change a rehgistry value at start up.
rumpleforeskin said:
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Click to expand...
Click to collapse
I could write an executable that will restore the registry entires on start-up but I can't find the registry value that controls it.
Which value are you editing?
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
pegaz said:
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
Click to expand...
Click to collapse
If that was in reply to me, I'm looking for registry entry!
This thread seems closest to the problem I have.
For me it is always that on alarm there is no popup where I can dismiss the or snooze the alarm
I always have to unlock the phone (by entering password), tap the status bar, then choose the alarm button and then the pop up appears as it should have done by itself.
This is always, no matter if I reset or not. And, I have checked on "display message" when I look into the settings.
This is freaking weird and annoying.
I've noticed the box unchecks after the sync process via Activesync.
I'm pretty sure it's caused by particular side software we have installed on our Diamons. I propose to post the side software list we have and then point out the pattern.
My list:
MS Voice Command
Finix Battery Icon
Splash ID
Sprite Backup
Diamond Tweak
Resco Explorer
Yandex Maps
Skype
CorePlayer
G-Alarm
Manila Calculator Skin
Yota TV
Nice idea but already flawed given you've not published an exhaustive list. A case in point being Activesync - that's a resident piece of software and furthermore one which you suspect as possibly being responsible!
Or are you certain it is a non-Windows issue? That's quite a leap of faith given we've all previously been scratching our heads...
I don't mean to come across negative, but I also don't want to see a futile attempt at finding a solution!
Mathew
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
I suspect G-Alarm, got to try to play around with it being uninstalled.
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Moonsower said:
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
Click to expand...
Click to collapse
That's a very good point, although it could quite simply be down to a combination of i) a limited number of people using the alarm, ii) affected users not being bothered by the issue, and/or iii) affected people not realising they are being affected!
I suspect G-Alarm, got to try to play around with it being uninstalled.
Click to expand...
Click to collapse
For what it's worth I've never used G-Alarm...
Mathew
Polluxus said:
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Click to expand...
Click to collapse
I had it on 1.93 and still on 2.03