Opening Messages - opens at BOTTOM of message?! - Tilt, TyTN II, MDA Vario III General

Anyone else? Open a message (any type) and it opens at the bottom of the message, so that I can't see the message or who it's from without scrolling up. It's annoying!
Also, if I use the D-pad to scroll through the messages, each message opens up in the same manner - at the bottom.
Is there a fix for this?
Thanks,
FrankyG

You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.

Mark Crouch said:
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Click to expand...
Click to collapse
Thanks for the reply , twice
Can anyone with a stock TyTN confirm what the default registry setting is?
Thanks,
FrankyG

thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)

patr!k said:
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...

Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
As do I, and I still have the problem after checking my settings. Can someone give us an answer on how to fix this issue?

Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage

patr!k said:
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
Click to expand...
Click to collapse
Huh? Could you explain a bit less cryptically?

Thanks a lot for the hint! I love this forum!

Related

All messages open at end of message. Please help...

I'm using an AT&T Tilt with the default ROM, no modifications, just added software. My text and email messages are opening at the end of the message. The scrollbar is scrolled all the way down. On really long messages, like long emails, it won't be scrolled all the way to the end, but down quite a ways. Does anyone know what might be causing this, or how to fix it. Any help would be greatly appreciated. Thanks...
did ya install kaisertweak? I read somewhere on this forum that that tool is causing that problem
No, I haven't installed that. But thank you for asking. I may check those references and see if anyone with that problem has found a solution...
try this , and please let us know!
http://forum.xda-developers.com/showthread.php?t=337968&highlight=messages
That was it. Thank you for pointing me in the right direction! Your original hunch was probably correct. I haven't installed that program but I did manually edit the registry to do that tweak. I didn't even think it was relevant cause I thought it only affected PIE. Looks like I have lots more reading to do at these boards. Thanks again for your help, and quick response...
I posted this in another thread, I have the Tweak installed on my Tilt and have the 4-Way Nav already set to 1. It still does this, very annoying. Any other suggestions?
didn't work on my HTC TyTN II either the suggested registry value value was already 1. I've been fiddling with KaiserTweak earlier.
working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
patr!k said:
working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What did you do? Please do share!
TheFuzz,
just follow this hint
patr!k said:
TheFuzz,
just follow this hint
Click to expand...
Click to collapse
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.
TheFuzz said:
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.
Click to expand...
Click to collapse
Same here. Did you find anything?
jahnotto said:
Same here. Did you find anything?
Click to expand...
Click to collapse
Nothing new, so I use Pocket CM now to do my texting, works much better anyways and has threaded messaging!

SMS Messages scrolled off screen upon viewing

Hey guys, I'm wondering if anyone has experienced the following before (I can't find any mention of it in various Kaiser FAQs etc)?
When I click on an SMS (and possibly MMS and E-Mail) the device automatically scrolls way past the bottom of the content and I have to manually scroll up to actually read it. I could understand it doing this if I was replying to the message, but I'm just clicking to view it.
I've experienced it on a couple of ROMs now - Dutty's dualtouch and Kaiser release so it seems to be something deep-rooted in the OS / messaging software.
Attached is 3gp video which demonstrates the problem. The quality is real bad but it's enough to see what's going on.
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Deframe said:
Any help would be highly appreciated as this is starting to become a bit of an annoyance!
Click to expand...
Click to collapse
A quick search is the best help that I can give you at this point.
Audio said:
An option in KaiserTweak causes this, you need to disable "D-Pad scroll Navigation" under "PocketIE". This should do the trick...
Click to expand...
Click to collapse
Thanks for the quick response but disabling that doesn't seem to make a difference
Same Here
I'm having the same problem (versions below). Any ideas?
hmmm... it should work... Are you sure you disabled it? Just to show you I didn't just make up a solution , here is a link to another thread which states that disabling d-pad navigation should solve the issue...
http://forum.xda-developers.com/showthread.php?p=1778601&highlight=text+bottom+screen#post1778601
Deframe said:
Thanks for the quick response but disabling that doesn't seem to make a difference
Click to expand...
Click to collapse
just wait a few seconds and than soft-reset!
this solved my problem!
steph
Success
Tried it a second time and this time it worked. Thanks Guys.
Problem occured also in my loved Tytn II.
It is a good news, Thanks U
yep - worked for me too.. thx Audio
thanks, disabling the PIE Dpad navigation tweak fixes the problem...
Soft reset did the trick, thanks all!
Same here! initially i too had problems that after changing it in KaiserTweaks, it still behaved the same, but the wait and then softreset did the trick!
Thanks a lot!

Messages open at the bottom!?

Anyone else got this... Every time i open a message it seems to default to the bottom of the message... i.e. a blank screen. So I have to scroll up to the top of every message i get!
How do i fix this!? its really annoying!
I have the same problem... I think it is rom specific though... I am using WM6.1...Sleuth V3
It's a registry hack issue. Install Kaiser Tweaks and disable the D-Pad scrolling.
If you are using Kaisertweak, make sure you have the D-Pad Scroll Navigation set to default.
fantastic - thanks
when i installed KaiserTweak i basically just put everything onto it's advised setting
Which option is it? I cant find it in KaiserTweak.
CorruptedSanity said:
Which option is it? I cant find it in KaiserTweak.
Click to expand...
Click to collapse
In KaiserTweak Collapse all the trees one by one until you get all the way down to PocketIE. In there set D-Pad Scroll Navigation back to Disabled.
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
duke911 said:
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
Click to expand...
Click to collapse
Perhaps you should read the actual issue again, cos you're talking about something else
oh, my bad...
knwoing this is the isuue, it happens with me also sometimes
Thanks
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
KaiserTom said:
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
Click to expand...
Click to collapse
Hey guys,
I'm experiencing the same thing with a Helmi AKU 3.5 ROM that I've put on my Universal. I know that KaiserTweak is for the....Kaiser, but I was wondering if anyone knew exactly which registry hack to change to "disable DPad scrolling". I read in one of these posts that it was under the PocketIE settings, and I do know that my PocketIE has been hacked to support "high resolution mode", so maybe this is what is causing my issue (although I've found nothing about the setting in IE itself).
If anyone can enlighten me (probably with a Registry setting), even if you've already 'fixed' your Kaiser, I would appreciate it immensely, as this small issue is slowly driving me nuts!
Thanks in advance all,
-scar

How to change the main menu soft button?

Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.

Dismiss Alarm Box Unchecks itself

every 2 or 3 days when my alarm sounds i get no onscreen noticfication to dismiss the alarm, only the symbol in the status bar.
When i look into sounds notification/reminders i see the "display message on screen" box is unchecked again so i recheck it.
What causes this to uncheck itself?
are you experiancing this behaviour or have any insight into the cause?
thanks
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Anyone knows how to disable Missed Alarm Alert (symbol on the status bar) so I don't need to go to status bar console and remove it every morning ?
drdoc said:
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Click to expand...
Click to collapse
I believe i was having this problem before i had installed Diamond TF3D.
The search continues.
Im having the problem on TLR3 ROM and i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
I'm using TF3D Config and also 1.93 ROM but I don't seem to have this issue?
Although I have never used it to apply a 'theme' only, to change date/time format and apply one of the performance tweaks.
Have you guys updated your TF3D config via apptodate and also tried restoring defaults (within TF3D config) and then tried applying your settings again?
i too only use TF3D config to format the date, i have updated it using apptodate.
I may uninstall it and see what effect that has, im not really sure that TF3D is the cause of the problem.
rumpleforeskin said:
i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
Click to expand...
Click to collapse
Yes, I'm on the original 1.37 ROM and am seeing this - bl00dy annoying too as it seems such an odd 'bug'....
Mathew
Had this happen again today, really annoys the wife as i spend time trying get the phone to shut up.
I have made no progress determining the cause, but it does only seem to uncheck the box after a soft reset, but strangley not after every soft reset..... the plot thickens
This problem only happens after i reset the device, but not every time.
As i cant find the cause i was thinking of a way to fix the problem.
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
and i have the values for the box checked and unckecked.
I have been googleing for the past hour but having no luck with what i want to achieve.
I would like to write a batch file to open a reg file that will change the dismiss box registry entry to the checked value, but it seems batch files cannot be run from the windows start up folder.
Im not very technically skilled with programming so could someone more knolegable point me towards the correct way of doing what i desired, which is change a rehgistry value at start up.
rumpleforeskin said:
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Click to expand...
Click to collapse
I could write an executable that will restore the registry entires on start-up but I can't find the registry value that controls it.
Which value are you editing?
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
pegaz said:
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
Click to expand...
Click to collapse
If that was in reply to me, I'm looking for registry entry!
This thread seems closest to the problem I have.
For me it is always that on alarm there is no popup where I can dismiss the or snooze the alarm
I always have to unlock the phone (by entering password), tap the status bar, then choose the alarm button and then the pop up appears as it should have done by itself.
This is always, no matter if I reset or not. And, I have checked on "display message" when I look into the settings.
This is freaking weird and annoying.
I've noticed the box unchecks after the sync process via Activesync.
I'm pretty sure it's caused by particular side software we have installed on our Diamons. I propose to post the side software list we have and then point out the pattern.
My list:
MS Voice Command
Finix Battery Icon
Splash ID
Sprite Backup
Diamond Tweak
Resco Explorer
Yandex Maps
Skype
CorePlayer
G-Alarm
Manila Calculator Skin
Yota TV
Nice idea but already flawed given you've not published an exhaustive list. A case in point being Activesync - that's a resident piece of software and furthermore one which you suspect as possibly being responsible!
Or are you certain it is a non-Windows issue? That's quite a leap of faith given we've all previously been scratching our heads...
I don't mean to come across negative, but I also don't want to see a futile attempt at finding a solution!
Mathew
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
I suspect G-Alarm, got to try to play around with it being uninstalled.
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Moonsower said:
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
Click to expand...
Click to collapse
That's a very good point, although it could quite simply be down to a combination of i) a limited number of people using the alarm, ii) affected users not being bothered by the issue, and/or iii) affected people not realising they are being affected!
I suspect G-Alarm, got to try to play around with it being uninstalled.
Click to expand...
Click to collapse
For what it's worth I've never used G-Alarm...
Mathew
Polluxus said:
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Click to expand...
Click to collapse
I had it on 1.93 and still on 2.03

Categories

Resources