Wm 5 and camera - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i upgraded my I mate pda2k but I have a problem: the camera doesn't work. Can you help me?

wiki

excuse me
sorry, but I did'nt found anyithing. I don't speack English very well. Can you write me a solution for my problem?

http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
Fix number 3

MDAIIIUser said:
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
Fix number 3
Click to expand...
Click to collapse
Thank yuo for helping me.
what have I got to do after the download of the file?

I tried to copy the file in the pocket pc, but, after a reset, when i tried to use the camera, there was an error message that said: "Failed to initialize the camera. Please reset the hardware. 36001:110:2

Related

Can't reboot after upgrade to XDA IIs Chinese

Today, I upgrade my HK XDA2s from eng to chinese, the chinese rom which was download from ftp , named "XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar" (Thanks the giver)
During the installation, I have successfully to edit the 3 rom header file to avoid the country ID problem.
All thing go well, and the PC screen saying "Congradulation" at last.
However, after I soft reset my XDA 2s, the device hang on the start up screen, can't reboot further more.
Can anyone tell me how to solve it OR any steps I miss ?
Thanks
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
MDAIIIUser said:
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
Click to expand...
Click to collapse
Thanks MDAIIIuser reply.
After seeing the PC screen said "Congradulation"
I've try 1) Softreset and 2) hardreset too
But the problem stilll exist.
Thanks
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
MDAIIIUser said:
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
Click to expand...
Click to collapse
Thanks MDAIIIuser, you already help me a lot.
Hope other member who 've encounter the same problem can sharing with us.
Furthermore, MDAIIIuser, while using the rom mention above
"XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar"
which is download from ftp server.
After upgrade, the start up screen is "Qtek" with KPN wording. It is very strange that why the chinese rom got "Qtek" wording.
It is there have something wrong on that files ?
You did what we all would have done, sorry that it was a waste of time.
This is another case of
FUNNY HA HA ... NOT
Check the thread on the t-mobile new rom found (cant post link am on mda). Here you will see that i found a new rom on ftp, posted it to wiki, downloded it and then cooked it to find out that it was a qtec rom.
What a waste of time that was.
We have one very sad person that thinks its funny to delete Ftp files, Ftp dirs and now post files that he/she knows would intrest some of us based on the threads that have been posted.
I for one will take more care when posting to wiki, pity as it takes the fun away.
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Dont think amy of our CHT are good, might try to download then and see if they work.
The link is in wiki, see my signature, you need the page with ship.exe in it.
idox said:
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Click to expand...
Click to collapse
Tell me which CHT ROM you did and how you flush Rom , maybe I can help,I try all CHT Rom in here except Dopod114 ROM was broken others all can flush,pm to me or replay in here I will help same as MDAIIIUser help me.
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Do not worry. I have got the same problem before. I suggest you just flash back to your own rom.
bbrcn said:
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Click to expand...
Click to collapse
re-flushing rom again , it's happen to me before,if you see usb 2.07 that need to re-flush again
Thanks for you two reply.
Yes I had thought about to it that way. But my problem is more serious the XDA stop at start screan the computer even can't detected it. I can't even do synch how can I flush it back? Is there any other way like "PC safe mode"? Anybody got a idea?
OK, move battery out wait 15 min , and put it back ,also reboot your pc,if don't work , try to remove and re-install ActiveSync .
try to doing soft reset first.
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
bbrcn said:
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
Click to expand...
Click to collapse
ok YOU DIDN'T SET ON Boot Loader Mode,TRY by pressing the camera button, power button and then the reset button and hold for a few seconds THAN YOU WILL SEE USB V-2.07 THAN PUT IN THE cradle THAN FLUSH YOU NEW ROM, I THINK SHOULD WORKING.
It do works by press voice record, power, reset together! :? Anyway it works again, just great!!
I'm really appriciated for your help mwang thank you!

6510b blocke during upgrade rom

Hi! i've tried to load italian rom on m 6510b like i read on this forum but the proces blocked! now phone after HardReset load old configuration and during this proces stop on image of hp that wrote SERIAL on top and v0.21 down.
What can i do? there is a solution or i must send it to hp? thanks
--------------------------------------------------------------------------------
the problem was................windows VISTA!!!!!!!
pc with os xp did rom install
Have you called to HP technical service?
really i've tried to do but they have not reply to my email.
settems said:
really i've tried to do but they have not reply to my email.
Click to expand...
Click to collapse
Can your 6510 get into bootloader mode?

Error 246 Device not responding

I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was ZackĀ“s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb

BCR WorldCard Mobile

I have downloaded and installed the BCR WorldCard programme from Duttythroy's website which seems to work fine except for the help file. it's there except the programme says it cannot find the help file although it does load. some of the images are missing from the help file and you keep having to click on the 'ok' button on the help file error message which does go eventually. it's not a big problem, but I do like things to work properly.
any help would be much appreciated.
Anyone got any ideas or the missing files?
got mine from links shown in thread.seems to be complete
hope u find this useful
http://forum.xda-developers.com/showthread.php?t=357738
Thanks Chap, will give it a go!
cush-tfgtgergeges
Can a mod please delete this post, it was created by accident, thanks!
Allen Mead said:
It's not a big problem, but I do like things to work properly.
Click to expand...
Click to collapse
Then what are you doing with an HTC Windows Mobile Device?!!!
lol, well, I guess that maybe that's a double standard. But I have no issues with mine and I'm certainly not worried about video drivers as that's not what I got mine for.
Did you get the file you were looking for? If not, this is the one I use and I have no problems with it at all.
Try THIS.
Yes, I found the file ok, thanks! I still get the same error message on the help file though
P1Tater said:
Did you get the file you were looking for? If not, this is the one I use and I have no problems with it at all.
Try THIS.
Click to expand...
Click to collapse
Is this the newest version for the Tytn 2 or where can I find this? (By the way this software is not included in the danish Tytn 2 - it's described in the manual as if it's on the phone, but it's not...???)

Serious problem with my kaiser

Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
gomesmachado said:
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
Click to expand...
Click to collapse
Why do people continue to screw up their phones by not reading, not understanding what they are doing, and doing things half the way. Are you all just rich and don't care about bricking a $500 dollar phone ? You are lucky you are able to recover your phone at all
Jumpspl is not hardspl . Jumpspl transitions your phone from stock spl to hardspl. You cannot flash any rom stock or custom ,that isn't specifically made for your carrier, until you have hardspl on your phone.
Read thoroughly and follow all the steps here, do not take short cuts and do not skip ahead,
http://forum.xda-developers.com/showthread.php?t=433835
canot do.....
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
gomesmachado said:
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Click to expand...
Click to collapse
What do the numbers say on your bootloader screen ( tricolored)?
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Press and hold camera button and power button and do a soft reset to get into bootloader to see what it says.
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Thats because you're not making it go to that screen..
Press and hold camera button and press reset
it says:
KAIS130
SPL-3.28.000
CPLD-8
gomesmachado said:
it says:
KAIS130
SPL-3.28.000
CPLD-8
Click to expand...
Click to collapse
Go to the wiki and find the original rom from your carrier and flash that ie: AT$T , T- Mobile, orange , 3 etc. Then after doing trhat try all the steps in the flashing for noobs thread again.
the only problem is that I bought the phone not from a carrier but from a store in Portugal and the phone was unlocked...
do you think I can still find the original ROM?
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
gomesmachado said:
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
Click to expand...
Click to collapse
It is not 3.28.410.0 on this list ?
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Help me Denco7 you're my only hope.
Denco7,
I tired to run the file that you told me with no luck.
it showed the same message of before:
ERROR 294: INVALID VENDER ID
what else can I try to fix my phone?
Does this help
http://forum.xda-developers.com/showthread.php?t=335568
http://forum.xda-developers.com/archive/index.php/t-425558.html

Categories

Resources