Related
Dear friendly XDA-Developer,
Three days back, I tried to upgrade my ASIA IIs radio from 1.02 to 1.12. It all went smoothly, but however, my IIs had been without signal and all it says is No Service. I've tried to search through the forums, but to no avail. Kindly please help... I'm at my wits end.
Thank you all!!!
Not sure were or what files you used, if they were type I or II, so I would just sugesst that you Reflash using the files of wiki.
Hi, thanks! I practically tried all the other radio roms for BA thats available on the ftp://xda-developers, but all give same results... Is it something to do with the radio rom or my phone?
You can't try all roms of the download site for they wont work unless you know what you are doing, (correct rom type ect).
Just make your life easy and go over wiki, download, read and install, its worked for many before you.
Read below this
Dear MDAIIIUser,
Like what you've said, I've read through the wiki BA guide, over and over again. I've followed throught the tutorial carefully and still, it didn't solve my problem.
I've some queries here:-
Firstly, if I use an incompatible radio version, would it affect my XDA IIs? I mean, I've successfully upgraded my CE Rom to 1.40 WWE previously and it worked flawless with cooked 1.40 Ext Rom, however, the moment I upgraded my radio rom, my phone feature cannot be utilised. It just says No Service. I've seen on the forum Asian users using Qtec 1.08 radio rom.
Secondly, my understanding on the Oper and WWE is that by setting them correctly with XDA3tools, I can then upgrade them to my XDA without facing any country code errors or such. But would it affect my XDA functionality?
Lastly, can you make any recommendations on which is the most appropriate CE/Radio ROM version I should use for my XDA IIs based on WWE & O2ASI001?
THanks a millions! Believe me, I've really tried very hard to get my IIs to work and have throughly read through the guide, but to no avail...
I recommend that you just download a FULL, fresh, 1.40 Shipped EXE (I recommend the I-Mate one) and upgrade with it.
Use the first method described here to upgrade.
Dear TheLastOne,
I'll try that now! I'll post the results after that.
Thanks a millions!
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
khngaroo
Could it be that your device is sim locked or that your sim card is no good?
Dear MDAIIIUser,
I believe that my SIM is not locked as I can make calls using the same SIM with another phone. When I insert my SIM card into my XDA, there wasn't any prompt or indication of my device being locked... Is there another way to verify that?
Thanks!
khngaroo said:
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
Click to expand...
Click to collapse
Hi KHNGAROO... I am not an expers as TLO and MDAUser..but you can give a try downloading the 1.10 radio and downgrading your 1.40 istallation thet contains 1.12 radio to 1.10... I experienced a lot of problems on my device ( low signal or no signal) with the 1.40+1.12 radio combination..and I solved with hios trick..Dont know if can work for you..but maybe you can try..byez
khngaroo
The fact that you have no service would or could indercate that it is beining rejected by your network operator.
Alas, I have no Idea what message you get when a BA is locked to a sim.
(as in the provider has SIM locked your device so that you can only use it with that sim on his network).
The fact that you can use your sim in a different phone proves that the sim is not faulty however that does not verify if the Phone is sim locked.
Thus can you insert a sim from another device that you know that works into your BA and use it.
I have no idea what you had on the phone before you upgraded it nor if it worked, nor if you have also changed your sim so its just a bit hard to work out your probem.
At the moment it could be a locked device or a faulty instaltion of the radio rom.
You might have to go back to your Shipped version to verify if the device still works.
Then upgrade the OS only and check again
Then cook the Extromn to make sure you are not downgrading anything with the new 1.40 OS
Then upgrade the radio to a higher version 1.10 to verify if it works
The upgrade to 1.12 to prove or disprove vicer's very good suggestion.
Have fun
Be careful with the files that you use as you can't use Type I upgrade files to upgrade a Type II rom. Thus you will need to always download the files based on wiki and not reuse the old ones.
Dear MDAIIIUser,
I've flashed my original shipped asian rom back to my device. Got the SD bootable from my pal holding the same phone. Didn't work, still says No Service. I guess either my device is locked or the hardware is screwed.
Is there anything I can do to unlock my SIM on my XDA, should it be my XDA being locked. Or do I really have to bring it down to the service center to get the whole thing fixed?
Thanks a millions for all your help... Appreciated...
You still have not asnswerd the question of the sim. So I still dont know if it is the original sim or if you are using another on on a locked device.
So based on what I do know:
If you flashed the original Rom and have the correct sim and it does not work then your device needs to be sent back to the shop (which will be no problem as you have the original rom in it).
Wiki has a how to unlock (but like I said I dont know if that is your problem)
To all whom had helped me along the way (esp. MDAIIIUser & TheLastOne & vicer)
Brought my XDA IIs to Accord Dist and got it fixed. Now its back. I was told by the customer service operator that they had replaced the whole mainboard altogether. They didn't tell me what was the exact problem. Guess it was the hardware all along. But I was wondering, how on earth can flashing a ROM cause so much damage?
Therefore, here is a warning to those who wish to flash their XDAs, please do so only f you know what exactly you are doing. Please read wiki carefully before you try anything, or you might end up just like me, hee...
Well glad you solved your problem. There are a lot and I mean a lot of people that have been able to falsh thier device via this forum. But as you said you need to read and understand what you are doing.
So what rom do you have now and are you going to keep it?
(Not sure based on your sig)
Dear MDAIIIUser,
Weel, I've upgraded my CE rom to 1.40. However, I've decided to maintain my radio rom as it is (1.02), its kinda like once bitten twice shy. Quite sceptical that my IIs might end up in heaps again, lol.
Thanks again for all your help and concern.
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
TheLastOne said:
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
Click to expand...
Click to collapse
Dear TheLastOne,
I took your word for it and gave it another shot! Followed all the instructions found at WIKI and presto, it worked and now my IIs is running on 1.40 CE and 1.12 Radio.
Many, many, thanks to all of you who had helped along the way!
khngaroo
Great, Happy for you.
The 1.40 rom has a few issues that can be found on the wiki Upgrade page that you need to be aware of.
Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!
Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:
Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.
Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.
Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!
hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.
Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.
thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.
SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.
Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.
Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?
Never mind ignore me, that'll teach me not to read T-Mobile's site correctly
Hello everybody
Yesterday I tried to use "lokiwiz - HTC Wizard Unlocker v0.2b" for my new T-mobile MDA Vario because otherwise I was not able to upgrade the ROM from 1.6.2.2 to the latest one. But.. in the end I got a problem. To be honest this problem was appearing periodically before unlocking/upgrading but now it presents permanently. I simply can not dial any phone number. The systems responds as: "SIM card is not installed or invalid" (something like that from translation from Dutch into English, originally: "SIM-kaart ontbreekt of ongeldig").
I already tried to use this SIM in my previous phone (SE T630) and it still works perfectly. I can dial numbers, I can SMS, whatever. But in my new T-mobile MDA Vario this SIM card just does not admit dialing the phone numbers.
Does anybody have any thoughts, what it might be?
Thank you very much in advance!!!
P.S. Honestly, in case of warranty during unlocking process I kept my SIM card out off the MDA.
Just for info...
When I bought MDA the version of ROM was 1.6.2.2 NLD
After upgrading I got ROM 2.21.2.5 NLD and ExtROM 2.21.2.108
As I see now it connected to T-mobile network but still can't dial any number, reporting of the possible problems with SIM card. In the same time this SIM card is working with no any problems in my T630.
This is a very strange problem indeed. When you turn your device on or soft reset, does the device ask for a PIN code for the phone? If it asks for a PIN code and it accepts that code and starts searching for a signal, that means that the device can read the SIM card. It is very strange that when you have a signal, the device cannot make call. Either it should not be able to compare your PIN code to the one on your SIM and give an error message, or if it accepts your PIN code, you should be able to make calls. Perhaps there is a hardware problem with your SIM slot that makes the device unable to read the info on your card? Since it works in your other phone, the SIM does not seem to be the problem. You can try flashing another ROM on it to test if the device works with that ROM. If that does not work as well, flash back to an original T-Mobile NL ROM and call T-Mobile for your warranty.
When it is loaded it shows up the Telefoon screen with the following message: "Ongeldige of ontbrekende SIM-kaart. U kunt nog wel alarmnummers bellen, als uw seviceprovider dit ondersteunt." If I type numbers it show stars, like I would enter the password. Why stars? I already tried to input my unlocking code but it didn't help, as looks like it expects something else that this. I may just press Annuleren and continue working with other available functions of MDA but still may not use the phone.
Could you please share the info how to downgrade back to 1.6 ROM?
Thank you very much for your response!
Ok, this indicates that your device cannot read your SIM card. The screen you get on start-up is the screen where you normally enter your PIN code, if the device can read your SIM Card. That is why you see only stars when you enter a number there. Seems to me that your device cannot read your SIM Card and therefore cannot compare the PIN you enter to the one on your SIM card. You should not be able to get a signal from T-Mobile, since your phone cannot read the SIM and cannot register with the network. This can be caused by three problems: either your SIM card slot is broken, or your ROM is faulty (try flashing it to another ROm first, for instance a Qtek ROM from the ftp server, there are many ROMs available there) or the SIM card is defective ( seems not to be the case here, since it still works in your other phone).
I recommend that you first try another ROM on your phone, e.g. a Qtek ROM. If the problem goes away then, just keep the Qtek ROM or try flashing the T-Mobile ROM again. If that does not help, flash the latest T-Mobile ROM (from their website) to your device and claim your warranty for a broken sim slot.
As far as I know it is not possible to downgrade to the 1.6 ROM, it is a non-AKU ROM and cannot override an AKU ROM. Perhaps someone can correct me, since I am not a 100% sure of this. You do not need the 1.6 ROM at all, if the Qtek ROM does not work, just flash the latest T-Mobile ROM to your device and claim warranty. Since you then have an official T-Mobile ROM on your device, warranty should not be a problem.
Would be that a problem to flash latest T-mobile upgrade back from Qtek? I need to know it just in case I would not be able to do that. Cause otherwise, sorry, but im ****ed up in front of warranty office..
It should not be a problem to flash the T-Mobile ROM over a Qtek ROM. You can first try a hard-reset to see if that solves your problem. You can also call T-Mobile Klantenservice and tell them your problem. Tell them you want to use a Qtek ROm to figure out the problem and ask them permission to do so. They are known to give permission for such actions if that can save them from repairing your device. Be sure they make a note in your file stating that they give you permission, that makes your case stronger if there is a problem with your warranty later on. Good luck!
Do you think it's illegal installing even T-mobile NL ROM updates by myself, i.e. not asking T-mobile to do so?
Like I said the previous version of my ROM was 1.6.2.2. Then I actually tried to flash the latest UK version (2.21.2.5). The network signal was actually appearing from time-to-time but then it just died. Then I tried to install the latest NL version (2.21.2.5NLD) to check whether the signal would appear. But it didn't help.
Installing official T-Mobile updates is not illegal. T-Mobile NL made the upgrade available on their site. These updates are meant to be carried out by the users themselves, therefore the file and instructions are placed on their site. For other brands ( Nokia, SE) these updates cannot be done by the users themselves, but Windows Mobile updates are meant to be done by you, thereby saving T-Mobile the costs of performing the upgrades for you. So if an official T-Mobile ROM is on your device, they can never deny you your warranty. You can try to replace the radio Rom only (there is a thread on this) to see if that helps, but I recommend flashing an official T-Mobile NL ROM on your device and claim your warranty. Since you have tried different ROMs, the problem obviously resides in the hardware. If a hard-reset does not help, use the lokiwiz application to sim and cid lock your device again and T-Mobile will not be able to see that you had unlocked it. Just mention that you tried a hard reset and that you tried upgrading to the latest official T-Mobile ROM and they will have to honour your warranty.
Re: T-mobile NL: problems with dialing after unlocking &
First of all to my knowledge T-Mobile MDA Vario in NL is SIMlocked and CID locked . If you want to know the difference I advise you to search in the xda-forum or google it.
Here are a few comments from my experience of upgrading and unlocking my MDA Vario.
( BTW I have T-Mobile MDA Vario initially with 1.6 ROM and SIM& CID lock -first upgraded to 2.21.2.5 then unlocked with lokiwizard3a !! )
cagliostro said:
Hello everybody
Yesterday I tried to use "lokiwiz - HTC Wizard Unlocker v0.2b" for my new T-mobile MDA Vario because otherwise I was not able to upgrade the ROM from 1.6.2.2 to the latest one. .
Click to expand...
Click to collapse
I disagree with this, upgrading should not require you to unlock your device unless you upgrade to a None-T-Mobile ROM. If this was your main target ( only the Tmobile upgrade ) you shoudn;t have messed with the unlock stuff
cagliostro said:
But.. in the end I got a problem. To be honest this problem was appearing periodically before unlocking/upgrading but now it presents permanently. I simply can not dial any phone number. The systems responds as: "SIM card is not installed or invalid" (something like that from translation from Dutch into English, originally: "SIM-kaart ontbreekt of ongeldig").
Click to expand...
Click to collapse
I am a bit puzzled you state that the device was not behaving well before you started tweaking. Why did you not go to the Tmobile shop? OK you like the challenge ? Anyway it does look like a Hardware issue to start with.
cagliostro said:
I already tried to use this SIM in my previous phone (SE T630) and it still works perfectly. I can dial numbers, I can SMS, whatever. But in my new T-mobile MDA Vario this SIM card just does not admit dialing the phone numbers.
Does anybody have any thoughts, what it might be?
Thank you very much in advance!!!
P.S. Honestly, in case of warranty during unlocking process I kept my SIM card out off the MDA.
Click to expand...
Click to collapse
OK what have you tried else?
The suggestion of trying a QTEK ROM shold be blocked by your CID lock. I you remove the CID lock ( which is possible but not legal ) your warranty is at risk. Tmobile may claim you messed up your device ...
Therefor What I did is only take the SIM lock out. Lokiwizard 2(a/b) did not work for my upgraded MDA so I looked around a bit and found that there is a newer version 3a. That one worked for me on the Tmobile 2.21.2.5 ROM. I did not use or try the QTEK rom since the Tmobile rom allows my warranty to be safe and is newer ( and stable afaik) then the QTEK rom .
I also have found there are updater that do not check your version number of NBF file because you officially can not downgrade the 2.21.2.5 so there is a way back should you need to. Though I personally did not verify this . I mailed with a person here at XDA forum who did it with success.
I would propose to play dummy when approaching Tmobile and not ask to go to QTEK rom and tryin to be the smartass.
Try to downgrade and go for warranty - thats what I would do..
There many answers to my questions in the forums, but I need to understand a bit better, hence the special topic.
I am thinkin of getting an MDA Vario with Co-Pilot software, this would be on T-Mobile Network. (actaully an upgrade by a family member for me).
I am on Vodafone myself, so I would need to unlock it, what the difference between SIM lock and CID unlock ? Which do I need to do ?
Then I would want to get rid of all the T-mobile branding, am I right in thinking that would be via a ROM upgrade to a unbranded ROM ? Which is the most favoured ROM people go for ? Whats usually the differences between these branded and unbranded ROM's ?
Stupid question, but th Co-Piliot Software would not get effected my any of these updates would it ? Or does it come on a CD, so I just need to re-install it after all the updated ?
Thats alot of big questions I know, so now you know how confused my head is, any explanantion would be fantastic and help me understand what I would need to do.
Thanks a bunch.
So after more reading I got some answers.
SIM Lock - The lock put on by your mobile supplier, which prevents you using another carriers SIM card. Usually done as your getting the phone at a fraction of the actual cost.
CID Lock - The lock on the phone which prevents ROM updates, I believe it prevents other ROMS, so you can use the current suppliers update ROMS, but will not allow you to put a ROM of another supplier.
ROM's - So there ROM provided by mobile carrier's, for UK I found there is ones from O2, T-Mobile and Qtek, I still do not know what the differences are other then the branding.
I am on Vodafone and by chance found a ROM for Vodafone :-
http://s131209249.online.de/vodafone_software/9100.htm
So I am thinking maybe this would be the best option for me.
I still would like to hear opinons on ROM's, please PLEASE helppppppp.
I assume I CID unlock my T-mobile UK and then I can apply any ROM including the above Vodafone one.
Got my vario today locked to T-mobile UK. And it was a G4 chip.
IPP/SPL - 2.21.0001
OS - 2.24.2.6
I had no t-mobile SIM so stuck my vodafone SIM in, first asks for my personal SIM password, then it asks for unlock code.
At this point I ran lokiwiz03a, which ran but never gave me unlock code, mentioned something about not being able to copy some file and it might be in use.
So I copied EnableRapi.cab to my phone and ran EnableRapi.cab from File Explorer, that went fine (message about overwrite, said yes)
Then I ran LockiwizMsl.bat from desktop while being connected to ActiveSync and there it was the unlock code.
Entered worked fine.
As regards the ROM upgrade, my main reason was to lose all t-mobile crap, but found an easier way with ZERO risk:
First time ever you startup phone it does inital setup, the last step it beings to do an install, as soon as the install starts pull the battery out, then reboot. (Important to have the battery cover off already)
On reboot you should be able to go into the phone no setup screens this time, also ZERO customizations, yes means you need to do all the GPRS, MMS etc etc setting yourself, but that I am happy to do.
Hope this helps someone.
Hello Everyone,
I know that is a very noob question, but I don't know anymore what to do.
I recently move to Germany and I bring my wizard (bought in Brazil) with me.
My device is CID and SIM unlocked and its running WM 6.1
The problem is, I never get signal!!
I already try all the available radios (2.19, 2.25, 2.69, 2.71 and etc..) and nothing happen!
someone knows if there anything to do for work?
I appreciate all the help.
Thanks in advanced.
no one? no ideias =/
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
-MyHTC- said:
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
Click to expand...
Click to collapse
i was not able to find it,
could you please send me a link, or tell me where i can find?
hope that work.
This Radio is from the O2 Xda Minis
And here is link to the ROM
danken schön!
i will try and report!
That is very strange!
i flash the radio and nothing happen.
I start to think that my device is SIM unlock again.
But the most strange is:
-I put a diferent SIM and my phone start normaly look for signal but couldn't find it.
-The Invalid SIM screen for type code don't show anymore
-When i read my device on Wizard service tool its show SIM LOCKED.
-But in Brazil i test other operator SIM a long time ago and works.
Any ideia?????
damed! i cannot find a solution...
anyone? any ideia?
I had the same Problem, I live in Germany and have the XDA mini S too, but it's a Vodafone SIM-Card inside. When I installed WM6 the Phone always got a bad connection to the network, and it took much longer even to connect than with the original GERMAN ROM from O2. I downloaded the original ROM from O2s german Website and flashed it with the tool which was in the downloaded file, I didn't extract it from the installer because my Phone was CID-locked. Then the Phone had very good connection again. Then I CID-unlocked it and flashed the newest release of TNT. I expected bad connection again but NO, the Phone behaves like with the original ROM.
XDA mini S german ROM:
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
My Phone is a G4, so I used this tool to unlock:
http://forum.xda-developers.com/showthread.php?t=332320
Then I flashed this ROM (Professional Edition):
http://forum.xda-developers.com/showthread.php?t=414518
I used ROMUpdateUtility_Wizard_NoID.zip for that:
http://forum.xda-developers.com/showthread.php?t=291215
Everything seems to be normal again. I described every detail because I am not really sure what the EXACT problem was because there are so many ways to do the same thing, but i don't know if every method REALLY DOES EXACTLY the same thing, if you know what i mean
wow! thats really strange! but i will try it!
i cannot beleave but works!!
thank you!