Sorry if this is posted before ... I just want to share.
[/b]If you planning to install signwise for wm2005 PLEASE DON'T, coz if you reset ur device the built-in password app will show up, and you can't get trough ur device again. It was happened to me :lol:. If en1 want to try it too, be my guest, and if it works normally after you're reset or ir device turn off, please show me the way, coz i definitly need it. Ive to hard reset my device again.
This is about as weird as it gets.
My phone won't let me hang up from a call. I try the touch screen button and the actual phone button and nothing.
Everytime I end a call, it will just stay "connected" until I hard reset the phone.
Has anyone else had this happen? And how can I fix it?
gregxdoom said:
This is about as weird as it gets.
My phone won't let me hang up from a call. I try the touch screen button and the actual phone button and nothing.
Everytime I end a call, it will just stay "connected" until I hard reset the phone.
Has anyone else had this happen? And how can I fix it?
Click to expand...
Click to collapse
did u install any application (like new dialer, contact manager, ...) that changed your dialer recently?
Mikulec said:
did u install any application (like new dialer, contact manager, ...) that changed your dialer recently?
Click to expand...
Click to collapse
Nope. I'm just using the stock dialer.
Is your service through ATT?
gregxdoom said:
Nope. I'm just using the stock dialer.
Click to expand...
Click to collapse
ok, in these cases its good to perform hard reset (not soft reset) if u are not afraid of setting your phone again from the beggining.
Then after hardreset u should try if its still the same, if not check it after every application that u install(u can figure out if it is some app that is causing it). If the hard reset dont help, u shoul try to flash another rom.
i agree it seems u need to perform a hard reset
but first try to remove ur sd card reboot and tell us if you still have the problem
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
go start-settings-clear storage and follow
i dont think u need another rom (especially if you happy with urs)
Mikulec said:
ok, in these cases its good to perform hard reset (not soft reset) if u are not afraid of setting your phone again from the beggining.
Then after hardreset u should try if its still the same, if not check it after every application that u install(u can figure out if it is some app that is causing it). If the hard reset dont help, u shoul try to flash another rom.
Click to expand...
Click to collapse
dsoler702 said:
Is your service through ATT?
Click to expand...
Click to collapse
Yep. I've got good ol att.
Hi anyone no how to hard reset the Galaxy S..?
knowyourcell.com/samsung/samsunggalaxys/galaxy-s-guides/498616/how_to_hard_reset_the_samsung_galaxy_s.html
Don't know it that works
tried the hardware method didn't work.
u can do factory reset by settings->privacy.
Or you can try *2767*3855#
I'm also wondering how to factory reset!! (yes I know it's in Privacy) but it keeps telling me cannot reset because clear service is not available
1 Select call.
2 Dial *2767*3855#
Archius said:
I'm also wondering how to factory reset!! (yes I know it's in Privacy) but it keeps telling me cannot reset because clear service is not available
Click to expand...
Click to collapse
did you get any solution for this?
my i9000 says the same "clear service is not available" - none of the suggested solutions works for me.
the reset option in privacy worked for me. my firmware is jf2, by the way, if that matters..
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is comming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the choosen option.
Regards Christopher
thanks man ,you made job easy.
Isn't hard resetting just removing the battery?
OGC313 said:
Isn't hard resetting just removing the battery?
Click to expand...
Click to collapse
no
hard reset, means something like FORMAT the phone, and restore the backup from Factory
If the phone has already been rooted, will the hard reset "unroot" it, so that you need to reapply the rooting procedure?
depends... to my best "guestimate" if you are on stock official ROM, chances are yes, you'll need to unroot again.
if you are using custom ROM, then it'll revert back to the clean state of the custom ROM you installed
i've not yet had the need to hard reboot, i'll find out in the near future
I just did a hard reset because I want to send my unit it for replacement.
How can I tell if the device is still rooted? I want to make sure they don't see any sign of rooting.
Edit:
The post below explains the unrooting procedure:
http://forums.hardwarezone.com.sg/showthread.php?t=2812085
But, where can I get the "odin3" for my phone which I bought from Optus Australia?
So the factory reset didn't unroot the phone?
dakine; said:
So the factory reset didn't unroot the phone?
Click to expand...
Click to collapse
Correct. It doesn't. After the wiping of data, it rebooted and presented the option of running the update.zip thingy, which I did not choose. Yet, it is still rooted. I could still see the icon called user permission. I can still install the screen capture program that requires rooting.
If you want to unroot, you probably have to use the procedure in my link above. The problem is I don't know where I can get e Odin3 file for Optus Australia.
My firmware details are as follows:
PDA I9000DTJF3
Phone: I9000DTJF3
CSC:I9000OPSJF1
When we unroot, this Odin3 thingy is to refresh which portion? All three or just one of them?
I just noticed that after hard reset, my music, video, pictures are not erased.
Isn't this strange?
^^ My internal SD card was wiped clean. Shows 13.43 GB total space and 13.43 available space
Will doing a hard reset reinstall all of the ATT features that were removed after rooting?
Good evening.
Yesterday I (unfortunately) decided to update to Lollipop, and did a factory reset.
Now, sometimes happens that when I unlock the phone, I can only see the wallpaper and nothing else. I can only reboot the phone, otherwise I can't do anything.
Is there a solution to this? Another factory reset? Something went wrong during the update?
Thanks in advance
Hey!
I don't know if this is the correct forum, but I hope so.
So, after having a few troubles getting the A2 to work with root and so on everything seemed to work until a few random apps didn't work at all (they crashed as soon as you opened them). After trying to solve the problem (and failing) I thought a factory reset would maybe be the best idea, now that I know the way to root it and so on.
But after factory reset the wifi doesn't work at all. It "searches" for networks, doesn`t find anything and if I finish the installation and manually want to turn the wifi off and on afterwards I can see that the wifi connection is turned off and if I press the slider it goes on and then off immediately.
I tried flashing the stock rom with the xiaomiflash-tool, tried to factory reset it on both partitions, but as soon as it boots and asks for a WiFi-network it can't find anything at all.
I hope somebody can help me.
There is the possibility that I did something wrong the last days and destroyed something because I probably tried too much compared to my knowledge (which isn't much at all), but maybe somebody can help me...
Thanks in advance!
im with the same problem
flash in edl mode