Pocket PC CHAT Engine and Windows Embedded software. - MDA III, XDA III, PDA2k, 9090 Software Upgrading

OK Here are two bits of software that you will need to enable your Blue Angel to enter Chat Rooms. I was able to acertain that the Windows Embedded Software file needs to be installed first. The CAB file is copied to the phone via Activesync and run from there. But the actual Pocket PC Chat software needs to be run from your Desktop. It installs to the phone from there. However even though I got it installed OK. As of yet I have not figured out how to set up the software itself and make it work. If anybody has any clue how to do this I would apreaciate any help you can give.
Please Email me at:- [email protected]
Thankyou
Rob

Dowload this FIRST
You must download and install the software from MSDN at the first link below for the chat engine to even load up. Sorry only able to give you the link, Uploader wont work.
http://msdn.microsoft.com/mobility/windowsmobile/downloads/evb.aspx
Also if your into tweeking the Windows Mobile Software I found a wealth of other tools at the adress below.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/mobdevtools.asp

Related

" not a valid pocket pc app"

....thats what I get alot of the time trying to install things like mem maid and skype mobile. Does anyone have any ideas on this one, do I need to unlock something to install as I don't see anyone else on the forum with the same prob. I have the T-mobile MDA if thats relevant.
Cheers.
Most probably you can't run unsigned apps.
Change the xxx101a key to dword 00000001 in security policies in the registry.
Did you download SkypeForPocketPC.exe or SkypeForPocketPC.cab ? I accidentally downloaded SkypeForPocketPC.exe the other day and got the same message. Download the .cab file instead. It's located on the same page. It says something like "For advanced users, download <link>.".
yes .exe installs for pocketpc are always ment to be run from the pc which then
use activesync to copy the cab to the phone and run it
Rudegar said:
yes .exe installs for pocketpc are always ment to be run from the pc which then
use activesync to copy the cab to the phone and run it
Click to expand...
Click to collapse
... or download it through opera if you have free 3G or WiFi.
thanks guys will give that a try, bloody love this fone

HELP!!!Actisync not connecting at all - "support code 0x86000107" ???

I need to flash a new rom, and my tilt wont sync for some reason to my pc. it has before. but now, it just wont, wont even give me a notice saying it cant sync.... this was the support code on my phone when it says view status
"actisync encountered a problem on the desktop
support code: 0x86000107"
any help?
edit: I'm running windows xp not vista
turboxer said:
I need to flash a new rom, and my tilt wont sync for some reason to my pc. it has before. but now, it just wont, wont even give me a notice saying it cant sync.... this was the support code on my phone when it says view status
"actisync encountered a problem on the desktop
support code: 0x86000107"
any help?
edit: I'm running windows xp not vista
Click to expand...
Click to collapse
Why don't you do a search or google first?
Delete the PC files
I use XP64, and have experienced this a few times when I've moved pictures out of the backup file on the computer. The fastest way to resolve this is to delete the entire file structure backing up your phone from your PC. If your phone is named "TOM," then there's a whole file structure backing up the phone. If you are okay with deleting the mirror files from your computer, you should. Then when you go to Sync, activesync won't see it, and it'll create a new one. Its a sledgehammer solution, but it works.
Duplicate issue of http://forum.xda-developers.com/showthread.php?t=377823&highlight=86000107 (Seaching for 86000107 found me the thread )
Please discuss there.
Thanks
Dave

how do you update .NET

how exactly do you upgrade the .NET to 3.5. i downloaded it from the microsoft website and it said it wasnt a valid ppc file.
i used the search function (typed .NET and also tried .NET upgrade) i even tried google. anyway basically all i want this for is so i can use the diamond beer app aswell as any other app i might download or create that might need it.
thank you.
Look here:
http://forum.xda-developers.com/showthread.php?t=468535
install the correct version... correct file is named
NETCFSetupv35.msi (recommended google search)
Greetz
Boris
P.S. you have to install it to ppc from starting it on PC while being connectet to ppc via active sync!!
thanks so i found this site.
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
is there a way to do this with out the active syn. i havent set it up yet and find it easier to just put it on my sd card and install like every other program.
if not thanks for ur help.

Activesync

Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.
Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.
I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.
Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.
Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.
help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse
All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!
All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John
Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee

First Windows Phone 7 App Unlocker Released

Hi Just wanna share the info regarding unlocking WP7, sorry if this posted in XDA already, but in case somebody want to try this unlock tools... here it is..
Microsoft allows developers to unlock their device for sideloading their applications for testing purposes using their marketplace account. Creating a marketplace account requires yearly charges of 99 USD which is difficult for new testing developers to pay for. A groups of developers have released a new Windows Phone 7 unlocker tool which provides the ability for anyone to unlock a WP7 device without a Marketplace developer account. The developers claim that this tool is completely safe and reversible for the phone and the app even allows you to relock the phone. Just download the exe,run it when your phone is connected. Thats it..Your phone unlocked. Here is the download links,
http://walshie.me/ChevronWP7.exe
http://www.multiupload.com/4T7AYFWLSZ
Congrats to the developers of this tool, the chevron group consisting of Long Zheng, Rafael Rivera and Chris Walsh. Follow their blog for more details on this project.
Click to expand...
Click to collapse
Link source: http://wmpoweruser.com/first-windows-phone-7-unlocker-released/
error the application says
(Sorry, i'm having trouble communicating with the phone,
-Please make sure it's connected using usb
-Please start the Zune application)
the zune app is detecting the phone I might be getting this error because i'm using win 7 64bit
vdub804 said:
error the application says
(Sorry, i'm having trouble communicating with the phone,
-Please make sure it's connected using usb
-Please start the Zune application)
the zune app is detecting the phone I might be getting this error because i'm using win 7 64bit
Click to expand...
Click to collapse
for all who are having issues i found a way that should definately work.
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=04704acf-a63a-4f97-952c-8b51b34b00ce&displaylang=en
download from the above link. install first.
Once you installed whats above then do the following:
1. Connect Windows phone 7 (HD7 for me)
2. ON THE DEVICE go to http://www.chevronwp7.com/cert and install. Lock the phone and leave it.
3. edit the properties of ChevronWP7.exe (I am running windows 7 64 bit.)
a. Run in compatibility mode XP SP3
b. Run as Admin.
c. Apply those changes and exit. DO NOT RUN IT YET
4. Start up the Zune software, and make sure it detects your phone
5. Run ChevronWP7 (If you get the pin code error, simply slide the lockscreen up so you can see the tiles, and run the program again.)
6. Then click all of the check boxes and unlock
There you go. This is just how it worked for me. If you have any questions, Ill try to help you.
HackMimic said:
for all who are having issues i found a way that should definately work.
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=04704acf-a63a-4f97-952c-8b51b34b00ce&displaylang=en
download from the above link. install first.
Once you installed whats above then do the following:
1. Connect Windows phone 7 (HD7 for me)
2. ON THE DEVICE go to http://www.chevronwp7.com/cert and install. Lock the phone and leave it.
3. edit the properties of ChevronWP7.exe (I am running windows 7 64 bit.)
a. Run in compatibility mode XP SP3
b. Run as Admin.
c. Apply those changes and exit. DO NOT RUN IT YET
4. Start up the Zune software, and make sure it detects your phone
5. Run ChevronWP7 (If you get the pin code error, simply slide the lockscreen up so you can see the tiles, and run the program again.)
6. Then click all of the check boxes and unlock
There you go. This is just how it worked for me. If you have any questions, Ill try to help you.
Click to expand...
Click to collapse
thanks worked like a charm although the program took like 15 mins to install lls it crazy because i'm using a core i7, but thanks for the tip I was at a stand-still til you showed up.
vdub804 said:
thanks worked like a charm although the program took like 15 mins to install lls it crazy because i'm using a core i7, but thanks for the tip I was at a stand-still til you showed up.
Click to expand...
Click to collapse
no problem bro. I spent 3 hours reading and trying on several machines till I found all that info in several places. It just did not work for me on XP but every os beyond from ms did.
I did every step, but it still doesn't work.
It keeps throwing the error
Sorry, i'm having trouble communicating with the phone,
-Please make sure it's connected using USB
-Please start the Zune application
If the phone's locked, it does show "Your phone is PIN locked" or sth.
I'm also running Windows 7 64 bit.
help
everytime i run chevronwp it crashes help
help
when i run the program and go through the check list and hit unlock i get a message that says the program has stopped workin help
1. Did u download and install the thing from the link to ms?
if no then that might be part of ur problem
2. Do u have Skype or any other app like that running on ur machine?
If so then u need to full close out of those apps. Make sure there process's are not still active. U can do so through task manager.
3. In Zune when ur phone connects does it say ur name or guest?
If guest then u need to hit the button below the phone image to set up ur phone to be the main user.
4. Did u sign into Zune?
If no then sign in. I was signed in when it worked for me.
I hope that helps troubleshoot ur problem.
Also try re downloading the unlocked app. If it was zip/rar it might of unpacked incorrectly.
1. Yes, I verified that because I can access the editor and Application Deployment (by searching for it..)
2. Only MSN, but that was switched off.
3. Will have to check, but I think it's the name of the phone.
4. Yes, I tried when signed in and out.
I will try booting in safe mode, maybe that helps.
I'll get back to you.
I have Win 7 64 bit as well and got all the same errors.
I then tried it on a Win 7 32 bit machine, with all the same settings, and no problems at all. Unlocked within a second.
Thankyou.
Taken from the chevronwp7 blog
seems that this tools dev has been temp stopped
tryed to dl the cerv from the link bellow
http://www.chevronwp7.com/cert
however its just goes to a 404 error page now
managed to dl the tool before the shutdown but seems to require the cert to work on a x64 machine
any ideas?
post from chervon bellow
Code:
ChevronWP7 Dev Team: “Earlier today, we were contacted by Brandon Watson, Director of Developer Experience for Windows Phone 7, to discuss the ChevronWP7 unlocking tool.
Through this discussion, we established a mutual understanding of our intent to enable homebrew opportunities and to open the Windows Phone 7 platform for broader access to developers and users.
To pursue these goals with Microsoft’s support, Brandon Watson has agreed to engage in further discussions with us about officially facilitating homebrew development on WP7. To fast-track discussions, we are discontinuing the unlocking tool effective immediately.”
Hope you already downloaded the software (^_^)
You will find it here.
You'll have to send it by mail to your HD7 to install it on your device.
MonteCristoffOn said:
You will find it here.
You'll have to send it by mail to your HD7 to install it on your device.
Click to expand...
Click to collapse
lol you beat me to it. make sure you extract the cert file from the zip before you attach to an email. just select the cert wait for it to download then select it again when you see the little shield next to the attachment. Then it will ask if you want to install the cert. do it and your set as far as that part of the process is concerned.
If your having issues with it in win7 x64 try changing the exe's compatibility to xp sp2 or sp3. i think i set mine to sp3 on my win7 x64 machine.
also make sure when your phone is sync to unlock your phone so its sitting at the start menu.
it worked! thanks montecristoffon for uploading of the cert file and and hackmimic for the guide.
Cheers!
HackMimic said:
lol you beat me to it. make sure you extract the cert file from the zip before you attach to an email. just select the cert wait for it to download then select it again when you see the little shield next to the attachment. Then it will ask if you want to install the cert. do it and your set as far as that part of the process is concerned.
If your having issues with it in win7 x64 try changing the exe's compatibility to xp sp2 or sp3. i think i set mine to sp3 on my win7 x64 machine.
also make sure when your phone is sync to unlock your phone so its sitting at the start menu.
Click to expand...
Click to collapse
I sent the reg file to my hotmail account and after downloading it tells me there is no app associated witht his file type. Am I missing something?
enyaj said:
I sent the reg file to my hotmail account and after downloading it tells me there is no app associated witht his file type. Am I missing something?
Click to expand...
Click to collapse
you need to install the reg on your pc. you need to send the cert file to your hotmail.
Friends I'm not getting the error when the ChevronWP7 tenatar open even as administrator. vm_web installed and error still continues. Thank you help me there. etou using windows 7 ultimate 32bts.
else how do I install phone.regAdd what steps to install it
rdia said:
Friends I'm not getting the error when the ChevronWP7 tenatar open even as administrator. vm_web installed and error still continues. Thank you help me there. etou using windows 7 ultimate 32bts.
else how do I install phone.regAdd what steps to install it
Click to expand...
Click to collapse
there should be a reg file. Just double click it and let it add to the registry on ur PC not the phone.
Phone = install cert
PC = install reg
Hi does this unlocker tool allow for third party apps to be installed? sorry abit confused about all this

Categories

Resources