Database Develop

Urgent Help Needed!

Hi Guys,
I bought an O2 XDA iis. I heared they had a new upgrade rom and so I decided to upgrade the phone. It ran ok and then got to checking phone details and crashed. The phone just is a blank screen with with USB and 2.07 on the bottom. I've tried all reboots but nothing works. Can someone please help..i think i just messed something up here!!

si2040 said:
Hi Guys,
I bought an O2 XDA iis. I heared they had a new upgrade rom and so I decided to upgrade the phone. It ran ok and then got to checking phone details and crashed. The phone just is a blank screen with with USB and 2.07 on the bottom. I've tried all reboots but nothing works. Can someone please help..i think i just messed something up here!!
Click to expand...
Click to collapse
Try re-flush rom again , it should work

reflush
Hi,
What do you mean reflush rom...it will not do anything at the moment..it will not active sync etc.. please can you clarify? The phone is just sitting with nothing showing on it. Power does nothing either. Just has Serial or USB showing on the screen depending if i place in cradle and some ver number at the bottom.. please can anyone help!!!

Re: reflush
si2040 said:
Hi,
What do you mean reflush rom...it will not do anything at the moment..it will not active sync etc.. please can you clarify? The phone is just sitting with nothing showing on it. Power does nothing either. Just has Serial or USB showing on the screen depending if i place in cradle and some ver number at the bottom.. please can anyone help!!!
Click to expand...
Click to collapse
check your pm

see here http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode

Or see here http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=7508&catid=34

Tried to Upgrade rom --> Crashed --> Now DEAD!! HELP!!

Please Help!!
I tried to use the aWizard utility and I did the RAPI and CID unlock and tried to install the 1.6.7.1 to my qtek with the original sept 22nd rom. It froze while doing the upgrade (after 3 or 4 mins) and now it gets stuck at the splash screen but it shows the 1.6.7.1. It does not connect via USB anymore and I can only soft reset or hard reset and it goes back to the qtek splash screen and hangs.
Do I have a paperweight?? Is there anything i can do without it being able to connect to USB??
Any help would be appreciated.
Riker.[/b]

Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp...

Thanks for your help!! It worked perfectly!! I am a long time 'viewer' and have loved all the knowledge that is available on these forums!!
I hope this helps out anyone else who is in a similar situation and is scared they have destroyed their device.
Boy am I relieved!!!
Riker.

OK
Try this funny rom:
ftp://xda:[email protected]/Up...TOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe

Re: Tried to Upgrade rom --> Crashed --> Now DEAD!! HE
riker said:
Please Help!!
I tried to use the aWizard utility and I did the RAPI and CID unlock and tried to install the 1.6.7.1 to my qtek with the original sept 22nd rom. It froze while doing the upgrade (after 3 or 4 mins)
Riker.[/b]
Click to expand...
Click to collapse
Hi Riker,
The upgrade takes 10 to 20 minutes to complete. If you stop it before it say finish then.... u have to flash ur device all over using upgrade program.

Button said:
OK
Try this funny rom:
ftp://xda:[email protected]/Up...TOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Thats unfare!
I may try somethings, but i'm not installing a new rom, without at least knowing what its going to do? :lol:

CID-unlock your Wizard first, please.

hey man..your lucky u got urs to work straight away
im stuck exactly where u r but now when i upload the new rom...nothing happens still..think its because i didnt do cid unlock...but it did say CID is unlocked on your phone now....
well...i just cnt get wait to get this dead 9100 to be bk up again..

Power failer during upgrade

Hi, I need help here
My XDA IIi doesn't work now.
I was doing an upgrade and the power of my computer went off.
Now my XDA just doesn't work now, I don't get windows mobile, I only get Serial v 1.01
Please help me, I need to fix this.
Thanks in advnace

gwoo_ca said:
Hi, I need help here
My XDA IIi doesn't work now.
I was doing an upgrade and the power of my computer went off.
Now my XDA just doesn't work now, I don't get windows mobile, I only get Serial v 1.01
Please help me, I need to fix this.
Thanks in advnace
Click to expand...
Click to collapse
simple, just put your device into the cradle Serial v 1.01 wil change to usb and run the upgrade again.

xda IIi problem

Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Thanks

you go to bootloadder and uprom again
goog luck

It doesn't sync with the pc anymore though.

Won't sync, but if you plug it in, and see the screen on the pda change to something like USB, it's connected.

It's connected, but when i go to update, it says country id error.

find this file at the ftp "MaUpgradeUt_noID.exe" and use it to upgrade

I fixed the problem by reflashing the rom using the ma_upgradeUt.
Thanks to everyone that helped

xda2i dead
hello
the solution seems very good to resolve the problem i have , but i cannot see any link to domnload the fix....
after aplying update ROM on my XDA2i (Qtek 2020i) i had a black screen with serial and V 1.01..
please advice
thanks

My XDA Dead
my O2 XDA IIi do not boot and it displays is "Serial V.1.01"
Please Help Me ?

fishbulb said:
Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Thanks
Click to expand...
Click to collapse
I'm in the same boat...
I think I'm in the process of reflashing the ROM.
I have a message, " Checking the information on your device, Please Wait"
how long should this whole process take?
Thanks

Time for an update
I waited 45 minutes for the ROM to update. It never got out of the "Checking the information on your device, Please Wait" mode. I have a bad feeling...
Its my guess that when its in the SERIAL screen and USB screen when plugged in to the Computer that its in Bootloader Mode. Is there a way to get it to load a new ROM? Or, am I trying to revive a "brick."
Thanks to all that help or explain my situation to me.

captirwin said:
I waited 45 minutes for the ROM to update. It never got out of the "Checking the information on your device, Please Wait" mode. I have a bad feeling...
Its my guess that when its in the SERIAL screen and USB screen when plugged in to the Computer that its in Bootloader Mode. Is there a way to get it to load a new ROM? Or, am I trying to revive a "brick."
Thanks to all that help or explain my situation to me.
Click to expand...
Click to collapse
you have to quit the installer program from task manager, then rerun it, i had to do this with both my xda2 and xda2i it hangs, make sure you dont remove your phone from the cradle or out of boot loader mode.
the second time the program runs it will not find any existing info and just install the OS, it takes about 30 mins

A Little More Info, Please
skeeve666 said:
you have to quit the installer program from task manager, then rerun it, i had to do this with both my xda2 and xda2i it hangs, make sure you dont remove your phone from the cradle or out of boot loader mode.
the second time the program runs it will not find any existing info and just install the OS, it takes about 30 mins
Click to expand...
Click to collapse
Please go into a little more detail. I go to Windows Task Manager, click on the "Processes" tab but unable to find the "installer program." Thanks...

I tried with my o2 2i XDA but it gets up to 2% then says there is a radio update error. HELP And does anyone have the 1.10 radio update?

well wn i faced this problem in my i-mate pda2,i asked the i-mate support ppl n they sed there wz no way other than dwnloading the original rom n re-installing it,so i guess u guyz hv 2 do da same in ur O2z.this problem happens becoz a simpl 'stik at bootloader' program is loaded in ur extended roms,n remember that extended roms are LOCKED.

fishbulb said:
Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Tried the same but dropped during update & now xdalli is completely dead. Read light comes on if in cradle with no battery.
Knowledge is very basic. Any suggestions apreciated.
Rgds
Click to expand...
Click to collapse

HW6515 died after upgrade

I tried to upgrade my device to WM6. Unfortunately it seems completely died after upgrade. It does not show anything and I cant even go to bootloader mode. Also it can not even charge the battery. Just the red LED is lit up after I remove the battery cover. Please help me!!!

There is no upgrade to WM6 for the 6515 it's not possible

masoud252000 said:
I tried to upgrade my device to WM6.
Click to expand...
Click to collapse
and how did you do that?

I have downloaded WM6 for seimens SX66 and I tried to upgrade my beetle device using this software!!!!!!!!!!!!!!!!!!!. after I received Upgrade completed successfully, I did hard reset on my device, but it does not power up at all. Please help me!!!!!

Why sx66???
Bootloader...rom...everything different!!!
I hope u can restore old rom...or you'll have a bricked device...

If you can't resolve the issue I could by your unit 'cause mine has a bricked screen. Please let me know if you wanna sell it, thanks!