Related
What is SmartsKEy .... What does it do? and if installed previously then how do i remove it? it comes preinstalled in Molski's ROM. Some how it got curropted and it fails to start and shows error messages every now and then.
Tell me how can i remove it so that i can install it again.
thanx
I wish I could help, but I can't seem to read this post... it's definately not in english
GldRush98 said:
I wish I could help, but I can't seem to read this post... it's definately not in english
Click to expand...
Click to collapse
hahaha......
GldRush98 said:
I wish I could help, but I can't seem to read this post... it's definately not in english
Click to expand...
Click to collapse
now try to read it show is ENGLISH
yay!
Smartskey is a utility that allows the left and right softkeys to be turned in to the Start Meny and OK/Close keys when you hold them down. It can also change the volume slider to act has a page scroll slider and it can do some other things.
Your best bet would be to just reinstall smartskey... I'm no familiar with Molski's rom, so I'm not sure where/how he has it installed.
When you still receive errors even when you've uninstalled SmartSkey then you should look for a program called: CheckNotifications this will remove the error notification for you
If would have used the search you would have found the solution on this forum yourself Just a small tip...
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM
I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.
okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.
Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.
here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY
thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.
VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?
you CHICKEN >"<
quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?
Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932
I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+
thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!
Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.
Hello xda, so yet another person took the plunge into flashing a rom. Im not sure what I did that was wrong because the install went perfect, it made it to 100 percent and restarted my phone like it was all well and good, but it wasnt. It just sits there perpetually restarting. Believe me I have been looking unfortunately, I didn't seem to find anything that helped. From the threads I read it sounds like I can just go to the boot loader, plug in my phone, then place a stock rom from alltel on my internal storage and flash that, or maybe I was mistaken with what I read. Either way I can't get that to work I can get to the boot loader and hook it to my computer, and the computer will say something connected, but it doesn't show up as a removable storage device or anything. This is the rom I used http://forum.xda-developers.com/showthread.php?t=553844 this is also the tutorial that I used http://forum.ppcgeeks.com/showthread.php?t=36062
Please, please give me some help.
me too
Anyone have any ideas? I tried using the HardSPL from here:
http://forum.ppcgeeks.com/showthread.php?t=35839
and I tried may different ROMs with the same problem... So i don't think it's the ROM.
Thanks in advance!
i was able to 'unbrick' my phone...
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. load the bootloader
3. plug the phone to the computer
4. go to sprint.com and get the Rom from them and just use their exe
now it's back to WM6.1
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
score3 said:
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
Click to expand...
Click to collapse
I don't know how offical it is, but I have loaded WM6.5 on my Sprint CDMA Diamond just fine.
Alright thank you that worked, I thought I was going to have a diamond shaped paper weight for a minute. I do believe that there are indeed 6.5 roms for the diamond, but I have no idea why this rom didn't work. Thanks for the help.
so I got mine to work with a wm6.5 rom.
this is what i did:
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. then get this wm6.5 ROM: http://forum.ppcgeeks.com/showthread.php?t=74084
this ROM is awesome!
Hope that works for you too.
You Bricked your Diamond
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Bmagee4716 said:
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Click to expand...
Click to collapse
Yes thats pretty important to know when you are messing with roms, also make sure to note the boot loader screen which is reset, back, vol down, and power. That is how I fixed my phone. This tutorial is a nice tutorial to look over. http://forum.ppcgeeks.com/showthread.php?t=36062
www.everythingdiamond.info/ this site has cdma versions theyre pretty good
Yeah I actually got my latest rom from there, thanks for all the help everyone you were a god send
check everythingdiamond.info or ppcgeeks.com . Both of those sites have stickies dealing with this and all the roms you'll find there are for cdma phones.
brainmaster's htc eznpu 2.1 wga english on my x1 with wm 6.1 the phone will turn on experia light comes on the goes out did i fry my phone what can i do to fix it thanks
okay now i;m getting
the device is unable to boot because either you have turned off hte device incorrectly or tread to instull an app untrust source press volume button up to reset or press any button to concancel this opperation will delete all ur personal setting ...ok it wont let me do any thing ,i dont care if i loose anything but it;s not letting me do anything
all good now
everything back up ,did some reading ,update latest ware reloaded everything back ,good to go
Great - but do you understand your own writing?
_TB_TB_ said:
Great - but do you understand your own writing?
Click to expand...
Click to collapse
LOL!!!!!!!!!!!!!!