smartskey - 8125, K-JAM, P4300, MDA Vario Software Upgrading

What is SmartsKEy .... What does it do? and if installed previously then how do i remove it? it comes preinstalled in Molski's ROM. Some how it got curropted and it fails to start and shows error messages every now and then.
Tell me how can i remove it so that i can install it again.
thanx

I wish I could help, but I can't seem to read this post... it's definately not in english

GldRush98 said:
I wish I could help, but I can't seem to read this post... it's definately not in english
Click to expand...
Click to collapse
hahaha......

GldRush98 said:
I wish I could help, but I can't seem to read this post... it's definately not in english
Click to expand...
Click to collapse
now try to read it show is ENGLISH

yay!
Smartskey is a utility that allows the left and right softkeys to be turned in to the Start Meny and OK/Close keys when you hold them down. It can also change the volume slider to act has a page scroll slider and it can do some other things.
Your best bet would be to just reinstall smartskey... I'm no familiar with Molski's rom, so I'm not sure where/how he has it installed.

When you still receive errors even when you've uninstalled SmartSkey then you should look for a program called: CheckNotifications this will remove the error notification for you
If would have used the search you would have found the solution on this forum yourself Just a small tip...

Related

Can't reboot after upgrade to XDA IIs Chinese

Today, I upgrade my HK XDA2s from eng to chinese, the chinese rom which was download from ftp , named "XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar" (Thanks the giver)
During the installation, I have successfully to edit the 3 rom header file to avoid the country ID problem.
All thing go well, and the PC screen saying "Congradulation" at last.
However, after I soft reset my XDA 2s, the device hang on the start up screen, can't reboot further more.
Can anyone tell me how to solve it OR any steps I miss ?
Thanks
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
MDAIIIUser said:
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
Click to expand...
Click to collapse
Thanks MDAIIIuser reply.
After seeing the PC screen said "Congradulation"
I've try 1) Softreset and 2) hardreset too
But the problem stilll exist.
Thanks
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
MDAIIIUser said:
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
Click to expand...
Click to collapse
Thanks MDAIIIuser, you already help me a lot.
Hope other member who 've encounter the same problem can sharing with us.
Furthermore, MDAIIIuser, while using the rom mention above
"XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar"
which is download from ftp server.
After upgrade, the start up screen is "Qtek" with KPN wording. It is very strange that why the chinese rom got "Qtek" wording.
It is there have something wrong on that files ?
You did what we all would have done, sorry that it was a waste of time.
This is another case of
FUNNY HA HA ... NOT
Check the thread on the t-mobile new rom found (cant post link am on mda). Here you will see that i found a new rom on ftp, posted it to wiki, downloded it and then cooked it to find out that it was a qtec rom.
What a waste of time that was.
We have one very sad person that thinks its funny to delete Ftp files, Ftp dirs and now post files that he/she knows would intrest some of us based on the threads that have been posted.
I for one will take more care when posting to wiki, pity as it takes the fun away.
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Dont think amy of our CHT are good, might try to download then and see if they work.
The link is in wiki, see my signature, you need the page with ship.exe in it.
idox said:
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Click to expand...
Click to collapse
Tell me which CHT ROM you did and how you flush Rom , maybe I can help,I try all CHT Rom in here except Dopod114 ROM was broken others all can flush,pm to me or replay in here I will help same as MDAIIIUser help me.
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Do not worry. I have got the same problem before. I suggest you just flash back to your own rom.
bbrcn said:
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Click to expand...
Click to collapse
re-flushing rom again , it's happen to me before,if you see usb 2.07 that need to re-flush again
Thanks for you two reply.
Yes I had thought about to it that way. But my problem is more serious the XDA stop at start screan the computer even can't detected it. I can't even do synch how can I flush it back? Is there any other way like "PC safe mode"? Anybody got a idea?
OK, move battery out wait 15 min , and put it back ,also reboot your pc,if don't work , try to remove and re-install ActiveSync .
try to doing soft reset first.
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
bbrcn said:
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
Click to expand...
Click to collapse
ok YOU DIDN'T SET ON Boot Loader Mode,TRY by pressing the camera button, power button and then the reset button and hold for a few seconds THAN YOU WILL SEE USB V-2.07 THAN PUT IN THE cradle THAN FLUSH YOU NEW ROM, I THINK SHOULD WORKING.
It do works by press voice record, power, reset together! :? Anyway it works again, just great!!
I'm really appriciated for your help mwang thank you!

XDA 2s Upgraded to wm 5

Hey all.
For once, I upgraded to wm 5 without any problems, well so I say.
Theres a few things, that I could do with.
When I originally tried upgrading, I copied the cab files etc from the ext rom ( o2's ) and I fancy installing some of the fixes they provide, but each one is called customization tools, so each time i install one, it uninstalls the previous. Any way around this?
Also, the joypad between the green and red phone, when the dialpad is open ( pressing green phone ) I used to be able to press up to view my contacts and down to see my history. Anyway to fix this?
One last, do the developers out there. I developer software for the ppc and windows using .net and cf.net. I would like to access the sdk of the phone it's self, which I know you can use CFNET's own framework to access certain things. But if theres anything else, i'd appreciate a heads up on it?
Kind regards
TIA
Gav
Hi, gRoberts
Can you tell where I can download WM5 for XDAs. I've searched but i haven't found anywhere (or I used the wrongkey to search)
Im waiting for your link.
Thanks alot.
nguyensonhm said:
Hi, gRoberts
Can you tell where I can download WM5 for XDAs. I've searched but i haven't found anywhere (or I used the wrongkey to search)
Im waiting for your link.
Thanks alot.
Click to expand...
Click to collapse
BlueAngel Windows Mobile 5.0 Home Page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
qyach said:
BlueAngel Windows Mobile 5.0 Home Page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
Click to expand...
Click to collapse
Thanks qyach
hijacking my thread lol
The previous versions were complicated, you had to get device id's etc correct or your phone was useless. So I downgraded back to shipped rom and lost my ext rom auto install feature.
This one, basically backup, unlock your rom, copy a file to the correct folder and run the exe, after that it's some complicated button presses and your in.
A tip! don't set a password when it first asks you. I did this on the last rom, and it locked me out completely. Not sure if its been fixed.
Gav

Registry Wizard "exception" when I start it up...?

On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Re: Registry Wizard "exception" when I start it up
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Re: Registry Wizard "exception" when I start it up
ghostrida said:
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Click to expand...
Click to collapse
Thanks -- I had convinced myself that it was my fault, for first trying RegistryWizard without loading the OPENNetCF library to the MDA first. But if you got the problem too, then it sounds like a more substantial issue.
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
stormryder said:
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
Click to expand...
Click to collapse
Not sure what these are...is this something needed beyond the OpenNetCF install?
yeah, please elaborate on these "extra" dll files. I loaded the openNETcf to the main memory of my device, that was all i had to do in the past.
regiwzzzzzzz
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Re: regiwzzzzzzz
thanas said:
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Click to expand...
Click to collapse
Not sure if there's anything you can do short of a hard reset -- but that should be the worst I imagine. This will restore the phone back to what it looked like right after booting up the first time with your ROM installed.
thank god i fixed it love the worl
thanas said:
thank god i fixed it love the worl
Click to expand...
Click to collapse
How did you fix it?
first the call button after the hardreset didnt work for some kind of reason so i thought it wouldnt hard reset

CLOSED-Touch-It with Wings - Public Beta for Wing

Closed this thread
go here:
http://forum.xda-developers.com/showthread.php?t=332789
itje said:
Ok here goes nothing
Whats in it (for now)
-TouchFlo with TF-settings
-10 button CommManager
-Htc Home build 2.0.814.722
-Networkwizard
-HTC Audiomanager
-psShutXP
-Hibernate
-TouchDialer
-MagicSS
-NotSoBlackKeyboardSkin
-HTC X-button 1,5
-HTC wmp skin
-Glossy Black bars
-Office 2007
-PHM registry editor
-Total Commander 2
-PIM backup 2,5
-Batterystatus
-Adobe Flash Lite
tweeks:
-Disable today items
-Disable sms sent notification
-Reminders show only once
-Wireless G enabled
-Disable customer feedback notification
-Security off
-SD battery drain fix
Removed:
-Windows Live (for better space and many dont use it, you can find cab to install newer version on the forum)
-Transcriber (VERY few uses it, saving space)
Instructions how to upgrade is in the Touch-IT folder.
READ IT.
If you dont, you will spend even more time infront of your computer flashing the official ruu before trying again, why waste time, use 1 min to read and understand.
Remember:
If you dont like what I have added, or what I have removed or w/e please dont spam this thread with lame comments.
Disclaimer:
I take NO responsebility if you brick your device, if you do search the forums before you come flaming me/us here at XDA.
IF you brick your phone (Brick=the phone can be used as a building brick, or maybe a paperweight? Because you cant start it up.) Its no others fault but your own.
Mainly the reason for bricking a phone is:
1. Not reading the instructions good enough
2. Not following the instructions.
3. Not having a RUU that can unbrick the phone (the official installer with the official rom for your specific phone, with your phones default language. In.ex if yu have a german phone by default, you need a german RUU, if not you will get invalid vendor error)
4. Not reading the instructions good enough..again
5. Not following the instructions...again
If you dont understand after reading CAREFULLY, then dont bother flash your device with this or any other rom.
I also recommend to use the pagepool changer found here http://forum.xda-developers.com/showthread.php?t=324955
I did nothing to the pagepool, because ppl have different experience with diffrent size on the pagepool, so thats why I leave that up to you
to find the correct pagepool size for your device.
Good luck
Download here: (only rapidshare for now)
Rapidshare
Click to expand...
Click to collapse
Downloading now, will post back when its installed
im just as qurious as a virgin at her weddingnight if it works out
Prepping my wing for it now
I will try this out and see what happens. I just started playing around with the other posted touch it rom. I do have an odd problem when i flash. I followed the instructions exactly. Established the aserg policies soft reset. put the phone in flight mode wait and soft reset. And then start the update. every time i do this tho i get this weird message titile ERROR - Uknown Status. First time i got it i acknowledged and that was a mistake as the flashing got screwed up. next time i didn't and the phone seemed to flash. and it was working. Anyways had this error ?
intothevoid said:
I will try this out and see what happens. I just started playing around with the other posted touch it rom. I do have an odd problem when i flash. I followed the instructions exactly. Established the aserg policies soft reset. put the phone in flight mode wait and soft reset. And then start the update. every time i do this tho i get this weird message titile ERROR - Uknown Status. First time i got it i acknowledged and that was a mistake as the flashing got screwed up. next time i didn't and the phone seemed to flash. and it was working. Anyways had this error ?
Click to expand...
Click to collapse
The error is completely normal, do not touch your screen when you see it. Let it sit and see if the installation finishes.
you can check my thread for install instructions as well
Flashing now cross your fingers
Im also uploading a mirror
hmmmmmmmmm.... interesting!
from the description looks like a perfect recipe of apps.
Will try tonight.
Thanks
also, would you rather us post in here, or in the development thread?
So far Im going on 20 minutes of install time, its still copying itsutils.dll currently.
WELLLLLL?????
whats going on then, anyone done yet
TylerC161 said:
also, would you rather us post in here, or in the development thread?
So far Im going on 20 minutes of install time, its still copying itsutils.dll currently.
Click to expand...
Click to collapse
post here, keep it simple
20 min??? wow
itje said:
post here, keep it simple
20 min??? wow
Click to expand...
Click to collapse
Mines 20 minutes into it to, but thats normal. I would say another 10 mins and it will be done. ITs copying the os.nb now.
Something crapped out on my machine and killed the connection, got to start over.
itje said:
WELLLLLL?????
whats going on then, anyone done yet
Click to expand...
Click to collapse
I'm downloading it rite now and will try it out shortly.
Bricked..
Trying again, loading RUU now.
TylerC161 said:
Bricked..
Trying again, loading RUU now.
Click to expand...
Click to collapse
awwwww!!
TylerC161 said:
Bricked..
Trying again, loading RUU now.
Click to expand...
Click to collapse
Same here, Loading RUU and will post back after ive tried again.
cleric said:
Same here, Loading RUU and will post back after ive tried again.
Click to expand...
Click to collapse
awwww times2
guess there might be a bigger diffrence with the wing os then I expected....hmmm
or maybe its the settings with the kitchen that is not fit for the wing? hmmmm
Or it could be we both just did something wrong.
I forgot to turn on flight mode before starting, Im about to attempt again.
try to install the enablerapi, and the cert.spcs also, I must confess im not sure what they do, but some have been sucessfull doing that when bricking only using asergspolicies...or maybe they just had luck

Some help please - flashing x1 to Touch-IT

Hi,
I was really hoping to do this without having to ask for guidance!!
I have backed up my ROM via Kovskykitchen: all OK and nice clear tutorial! thx..
I have X1_HardSPL_V1 ready to run..
I have the Touch-IT Experience ROM..
I think I follow the process but have a question about HARDSPL : Once I have completed the process - will I be able to use the phone at that point - or will I have to flash a new ROM to use it? i.e. is HARDSPL just an unlock so to speak or does it wipe the phone?- been reading this very helpful thread http://forum.xda-developers.com/showthread.php?t=446070 by Phenx - ta..
Flashing the new rom:
all the detailed tutorials seem to be the MicroSD method.. I can't find a decent X1 walkthrough using activesync...
Can anyone point me in the right direction? I'm obviously searching wrong..
Thanks!!
(One other question: will flashing affect my sim contacts? Thanks)
I'll try and answer ur questions to the best of my ability but i can't say i know much about what hardspl is besides the ultimate tool
After you hardspl u will be able to use ur phone as normal. I believe it still has the same stock rom on it but again i'm not sure but i do know u will be able to use it.
There is a way to use activesync and its fairly simple. Establish a connection through activesync and then run the rom update utility and follow the instructions. This is the only method i've ever used and i've been flashing my phone since the wizard.
Hope this helps
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
I would suggest backing up your contacts to your sim card, pull your memory card and then flash AFTER you hrdspl the phone. The hrdspl enabled you to be able to flash the phone to another rom, it will not interfere with the operation of the phone afterwards.
WC
x1tom said:
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
Click to expand...
Click to collapse
Most ROM's are packed together with the flash prog. I do recommend the microSD method, as it's less prone to murphy's law.
always use the sd way, it far by the safest.
your sim contact will be left on the sim the other contacts yo want to backup.
hardspl is a unlock only utility, wont affect your phone, rom.
ive done it throught the sd way ...and its really simple and no problems, i had a few problems with hardspl ...but got that sorted quick enough.
yeah so i'd recommend the sd way.
Well don't have a microSD so did it via activesync...
HARDSPL - was painless - click - click, go make coffee - done!
I mistook the ROM update in the Touch zip for another HARDSPL.. It was infact (obviously) the update util needed.. Flashed to Touch-it .21 - As easy as HARDSPL....
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
x1tom said:
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
Click to expand...
Click to collapse
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
well thats the icing on the cake!! cheers - worked a treat.. thanks all
fards said:
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
Click to expand...
Click to collapse
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Angelusz said:
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Click to expand...
Click to collapse
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
smaberg said:
always use the sd way, it far by the safest.
...
Click to expand...
Click to collapse
flashed my phone like 10 times now and NEVER used the SD version.
so from my point of view ... usw the USB version. saves loads of time.
plugin USB
sync if not allready done
start update and click a few times
done
download file on x1, save to sdcard,,,,, rename flash, much easier doesnt require windows pc can be done anywhere and less chance of failure
must have flashed different devices well over 100 times
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
narutoramen said:
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
Click to expand...
Click to collapse
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Ooops! Misspost.
fards said:
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
Click to expand...
Click to collapse
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Angelusz said:
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Click to expand...
Click to collapse
mm what theme are you running?
Mine is pure black.. or do you mean the battery strip right along the top?
rotsu said:
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Click to expand...
Click to collapse
you dont need to falsh HardSPL again.

Categories

Resources