On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Re: Registry Wizard "exception" when I start it up
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Re: Registry Wizard "exception" when I start it up
ghostrida said:
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Click to expand...
Click to collapse
Thanks -- I had convinced myself that it was my fault, for first trying RegistryWizard without loading the OPENNetCF library to the MDA first. But if you got the problem too, then it sounds like a more substantial issue.
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
stormryder said:
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
Click to expand...
Click to collapse
Not sure what these are...is this something needed beyond the OpenNetCF install?
yeah, please elaborate on these "extra" dll files. I loaded the openNETcf to the main memory of my device, that was all i had to do in the past.
regiwzzzzzzz
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Re: regiwzzzzzzz
thanas said:
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Click to expand...
Click to collapse
Not sure if there's anything you can do short of a hard reset -- but that should be the worst I imagine. This will restore the phone back to what it looked like right after booting up the first time with your ROM installed.
thank god i fixed it love the worl
thanas said:
thank god i fixed it love the worl
Click to expand...
Click to collapse
How did you fix it?
first the call button after the hardreset didnt work for some kind of reason so i thought it wouldnt hard reset
Related
Today, I upgrade my HK XDA2s from eng to chinese, the chinese rom which was download from ftp , named "XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar" (Thanks the giver)
During the installation, I have successfully to edit the 3 rom header file to avoid the country ID problem.
All thing go well, and the PC screen saying "Congradulation" at last.
However, after I soft reset my XDA 2s, the device hang on the start up screen, can't reboot further more.
Can anyone tell me how to solve it OR any steps I miss ?
Thanks
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
MDAIIIUser said:
Did you do a Hard reset (power and reset) after the install like it told you to do on the screen?
Click to expand...
Click to collapse
Thanks MDAIIIuser reply.
After seeing the PC screen said "Congradulation"
I've try 1) Softreset and 2) hardreset too
But the problem stilll exist.
Thanks
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
MDAIIIUser said:
Sorry, can't help out! never been down that path, alas wiki has no info on that issue.
Click to expand...
Click to collapse
Thanks MDAIIIuser, you already help me a lot.
Hope other member who 've encounter the same problem can sharing with us.
Furthermore, MDAIIIuser, while using the rom mention above
"XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar"
which is download from ftp server.
After upgrade, the start up screen is "Qtek" with KPN wording. It is very strange that why the chinese rom got "Qtek" wording.
It is there have something wrong on that files ?
You did what we all would have done, sorry that it was a waste of time.
This is another case of
FUNNY HA HA ... NOT
Check the thread on the t-mobile new rom found (cant post link am on mda). Here you will see that i found a new rom on ftp, posted it to wiki, downloded it and then cooked it to find out that it was a qtec rom.
What a waste of time that was.
We have one very sad person that thinks its funny to delete Ftp files, Ftp dirs and now post files that he/she knows would intrest some of us based on the threads that have been posted.
I for one will take more care when posting to wiki, pity as it takes the fun away.
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Dont think amy of our CHT are good, might try to download then and see if they work.
The link is in wiki, see my signature, you need the page with ship.exe in it.
idox said:
after i finished update, i discover this topic....
I also hit this problem right now.
Can anyone tell me what can i do?
Click to expand...
Click to collapse
Tell me which CHT ROM you did and how you flush Rom , maybe I can help,I try all CHT Rom in here except Dopod114 ROM was broken others all can flush,pm to me or replay in here I will help same as MDAIIIUser help me.
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Do not worry. I have got the same problem before. I suggest you just flash back to your own rom.
bbrcn said:
My new XDA IIs got a same problem here. It's dead. Anybody got a solution?
Click to expand...
Click to collapse
re-flushing rom again , it's happen to me before,if you see usb 2.07 that need to re-flush again
Thanks for you two reply.
Yes I had thought about to it that way. But my problem is more serious the XDA stop at start screan the computer even can't detected it. I can't even do synch how can I flush it back? Is there any other way like "PC safe mode"? Anybody got a idea?
OK, move battery out wait 15 min , and put it back ,also reboot your pc,if don't work , try to remove and re-install ActiveSync .
try to doing soft reset first.
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
bbrcn said:
Thanx MWang.
Yes I tried what you said, still not working. The xda freezed at the first second it start. I think that is why pc can't detected it. Also soft reset will only turn off the xda and it won't start unless you use hard reset.
Click to expand...
Click to collapse
ok YOU DIDN'T SET ON Boot Loader Mode,TRY by pressing the camera button, power button and then the reset button and hold for a few seconds THAN YOU WILL SEE USB V-2.07 THAN PUT IN THE cradle THAN FLUSH YOU NEW ROM, I THINK SHOULD WORKING.
It do works by press voice record, power, reset together! :? Anyway it works again, just great!!
I'm really appriciated for your help mwang thank you!
thEsE files are only for the HTC WIZARD
this post is in response to the request from this thread ;http://forum.xda-developers.com/viewtopic.php?t=52521&postdays=0&postorder=asc&start=0
Upgrading only the radio or the splash and extended-rom will not wipe any setting from you device. It only updates the respective part that you are flashing.
This is a proper extended-rom[for sumiter rom wizard custom AKU 2.3 ROM but it should work with any 2xxx rom].nbf is not a folder containing the files
To install unzip the folder and run the ROMUpdateUtility_Wizard_NoID.exe
You will not lose any setting that you have in your rom. It simply updates the extended-rom.
when’d you decide to hard reset you device again the extended rom will load automatically as in the official rom , there it is .no Cingular stuff .
download my extended rom from here EXTENDED-ROM-FOR NON-CINGULAR-USERS
how to install? simply run the ROMUpdateUtility_Wizard_NoID.exe that is inside every splash screen and extended rom folder[/b]
more splashes coming soon.please post your requests and if you like my work please say thank you a least .
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
gizm0luvsu said:
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
Click to expand...
Click to collapse
no it should stay the same.
Thanks !
Hi Faria,
Thanks for this handy utility. Are you still working on a kind of manual about cooking your own rom?
Nico
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
raven2000 said:
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
Click to expand...
Click to collapse
HTC LOGO HAS BEEN UPLOADED TO THE FIRST POST
gooshy said:
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
Click to expand...
Click to collapse
your problem is very rare but it is know across roms im afraid i dont know the cause.
this is a network issue, happens to me all the time sometimes i get the msg 4 times in a row lol THANK GOD FOR UNLIMITED TXT
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
update
update
I have successfully created a new test extended rom for any wizard with 2xxx rom versions regardless of the carrier.
the best thing is that this extended rom has carrier settings in it for UK/AUSTRALIA /SOUTH AFRICA/PORTUGAL/NEW ZEALAND/NORWAY/AND Nederland’s ,so wend the extended rom loads a dialog comes up and you chose the particular carrier setting that you want, after selecting it just install automatically.or you could just press cancel and no carriers setting will be isntalled but the remaining items will be.nice.
I have also manage to hack the program called [wm5torage] so now it can be installed from the extended rom ,I have also made the program 30% lighter and it works flawless
Also it has registry setting on it like; gps icon back, performance tweaks etc, etc...
At the moment imp putting a few more settings programs into it like a tiny program that actually closes the applications and it is only 4kb.
It is not ready to public release. But will be soon if anyone is interested. Are you?[/
samimayer said:
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
Click to expand...
Click to collapse
are you talking of the htc-logo or splash screen?
both would mae me happy
the splash is the most annoying
i use the attached (changed 2 jpg for size) file
as the welcome96.png
can it work on prophet?
Orange?
/Cacti
Re: Orange?
le_cactus said:
/Cacti
Click to expand...
Click to collapse
thank you for uploading orange dump CACTI,i have converted and posted in the first post, also there is a DOPOD splash uploaded.
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
kyphur said:
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
Click to expand...
Click to collapse
kyphur is correct 1 wrong move and you have a dead device. the reason that it is difficult to do a tutorial on how to cook roms is because you need to mess with several tool/programs/encode/decode/convert flash,etc,etc.etc...there is not a simple straightforward way of doing it, my Wizard is only 2 months old and have learn to cook roms unlock simply by reading the xda,also a lot has been guess work and brain power because no one is prepared to help you kill you device .at the moment I m very busy but I plan to write a tutorial in how to cook your extended rom.
in another note there is 2 new splashes uploaded
lookie
I'm gonna try it right now.
ivanmmj said:
lookie
I'm gonna try it right now.
Click to expand...
Click to collapse
woooooooohoooooooo thanks man good luck
got it workin! yipee!
Tested. WORKS GREAT!!
Good Looking Out
Works like a Charm.
Now Ttran can use it for his next release.
can somebody tell me where i put these files and how i do this.. i have hard spl and using open touch v3.0
thank you
prelude91sit said:
can somebody tell me where i put these files and how i do this.. i have hard spl and using open touch v3.0
thank you
Click to expand...
Click to collapse
If you download the DLL, just place it on your windows directory, disable HTChome first, of course, then reenable it after replacing the dll in the windows directory.
prelude91sit said:
can somebody tell me where i put these files and how i do this.. i have hard spl and using open touch v3.0
thank you
Click to expand...
Click to collapse
ok if u have Open Touch.. Download the 2.1 cab.
install into ur device..
once u have it installed open Internet Explorer.
then Minimize Internet Explorer.. NOTICE I SAID MINIMIZE NOT CLOSE. "sorry for the caps"
and then just tap on the weather and it'll update..
u only have to open IE once. i guess that enables it.
where do i install or copy the files to? how do you minimize ei?
no **** sherlock im talking about what folder
prelude91sit said:
no **** sherlock im talking about what folder
Click to expand...
Click to collapse
Hey Dude.. if ur gon come in here with that attitude, with other peeps.. no one will help u out.. on the Real
and if ur talking about what folder u have no idea on how to run a .cab file do u? if u did u would know what he ment. and when i said INSTALL on the DEVICE
cangri87 said:
Hey Dude.. if ur gon come in here with that attitude, with other peeps.. no one will help u out.. on the Real
and if ur talking about what folder u have no idea on how to run a .cab file do u? if u did u would know what he ment. and when i said INSTALL on the DEVICE
Click to expand...
Click to collapse
i appreciate your help but i could care less what he posted cause it was useless.
so i just put the files anywhere?
prelude91sit said:
where do i install or copy the files to? how do you minimize ei?
Click to expand...
Click to collapse
Just download the cab. Run it. Run IE, don't close it. To minimize it, either set your... well, to make it simple, just click on start and then click on today. Then do your thing.
prelude91sit said:
i appreciate your help but i could care less what he posted cause it was useless.
so i just put the files anywhere?
Click to expand...
Click to collapse
One more time.
You INSTALL the CAB on the device. You don't place them on ANY folder, unless you download the dll itself. I realize that's what I said first. But that's because I didn't see his cab file.
Just run the cab file.
prelude91sit said:
i appreciate your help but i could care less what he posted cause it was useless.
so i just put the files anywhere?
Click to expand...
Click to collapse
ok u can put the cab file anywhere..
i usually put it on my memory card.
once u run the .cab file from ur memory card.. its gonna ask u where u wanna install the file.
Memory Card
Device
Network.
ur gonna select Device.
and to minimize IE u just click on the start tab on the top left side and click on today screen.
thanks for the help. im sorry but i thought i got but i think it did when i connected to my laptop. so i just download the files and run the setup while the wing is hooked up. or do i copy the files on the wing and then run the setup? im sorry but trying to figure out how to install the on the device without putting them in a folder. well thanks for all the help
thanks for the heads up ivan, its working for me.
cangri87 said:
ok if u have Open Touch.. Download the 2.1 cab.
install into ur device..
once u have it installed open Internet Explorer.
then Minimize Internet Explorer.. NOTICE I SAID MINIMIZE NOT CLOSE. "sorry for the caps"
and then just tap on the weather and it'll update..
u only have to open IE once. i guess that enables it.
Click to expand...
Click to collapse
thanks this helped me get mine working
blank today
how come my today screen is blank after installing and restarting, activating plugin, etc.? Tried with htc home 2.1 and htc home 5-tab patched... thnx in advance for any help.
towenk3 said:
how come my today screen is blank after installing and restarting, activating plugin, etc.? Tried with htc home 2.1 and htc home 5-tab patched... thnx in advance for any help.
Click to expand...
Click to collapse
that happened to me too. i enabled some other random today screen plugin (doesnt matter which one) and htc home appeared. then i just disabled the random one.
still blank
i tried activating several different plugins (and de-activating) with no success. any other ideas?
the tri colour thing comes up but after that it freezes on the loading screen I am running windows mobile 6.1 (came with phone).(sony Erricson Xperia x1i
mikebuckley888 said:
the tri colour thing comes up but after that it freezes on the loading screen. any fixes would be much apperichated.
Click to expand...
Click to collapse
for starters: retry w/o sd card
and add a little more info on how your phone is setup and what you already tried or not, no thought-readers out here (that I know of)
Does it say anything in perticular when it freezes? If you'd manage to by accident fail to flash a rom you might have this issue saying something about updating rom.
My refrigerator also doesn't work...
no serious dude, first read before posting.
And if you don't get out, give us so much info so that we could help you.
Good luck
maddude88 said:
Does it say anything in perticular when it freezes? If you'd manage to by accident fail to flash a rom you might have this issue saying something about updating rom.
Click to expand...
Click to collapse
Yep it has the loading screen with three dots.
(thanks veryone for you help)
have you hard-spl'd?
or is this what your trying to do?
yeah thats what i'm trying to do
Jonny4911 said:
have you hard-spl'd?
or is this what your trying to do?
Click to expand...
Click to collapse
yeah i'm trying to do that.
well i was making a rom and so i completed it. So i flashed it to my hima and it didn't work so, i flashed one of my working ones to it and it stays stuck on the first boot screen before the backlight comes on.
Anyone know whats happening here?
Thanks
flyboyovyick said:
well i was making a rom and so i completed it. So i flashed it to my hima and it didn't work so, i flashed one of my working ones to it and it stays stuck on the first boot screen before the backlight comes on.
Anyone know whats happening here?
Thanks
Click to expand...
Click to collapse
Should I really delete it?
You failed, what did you do?
hay i also got such a problom when i can't find the solution for always connected with active sync guide.
so just read it and follow the steps and flashe any good ROM and then hard reset it by below steps
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
& leave it you got your working screen again if device is not broken
best regards
KAASHP said:
hay i also got such a problom when i can't find the solution for always connected with active sync guide.
so just read it and follow the steps and flashe any good ROM and then hard reset it by below steps
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
& leave it you got your working screen again if device is not broken
best regards
Click to expand...
Click to collapse
No boot - rom failure.
Try using new tools instead
i fixed it. i just flashed one of your roms to it. lol
flyboyovyick said:
i fixed it. i just flashed one of your roms to it. lol
Click to expand...
Click to collapse
Well, in my opinion: Do not delete this thread.
It's a good beginning to discuss common problems on upgrading, or installing apps after that! What do you think of that? Telling others about problems and their solutions or workaround.
----------------
Now playing: Herbert Grönemeier - Musik nur wenn sie laut ist
via FoxyTunes
muckelmaus said:
Well, in my opinion: Do not delete this thread.
It's a good beginning to discuss common problems on upgrading, or installing apps after that! What do you think of that? Telling others about problems and their solutions or workaround.
----------------
Now playing: Herbert Grönemeier - Musik nur wenn sie laut ist
via FoxyTunes
Click to expand...
Click to collapse
good idea!
So luby have you been working on the 2minutes to flash a rom thing?
Or no progress?
flyboyovyick said:
So luby have you been working on the 2minutes to flash a rom thing?
Or no progress?
Click to expand...
Click to collapse
I've been working but now it is holiday, I have no special time to cook and create tools, I barely find time to write on forums. But last one is a must.
None of the kitchen for Himalaya can not gather a working firmware --- after flashing and hard reset - white screen.With Microsoft Device Emulator v3.0 everything works fine.Help us to reach a working Russian ROM.All files i give:
http://gettyfile.com.ua/570432/
aeroflyluby said:
No boot - rom failure.
Try using new tools instead
Click to expand...
Click to collapse
yeah you are right but by using good ROM you can flash it again and get working device Isn't it ??
KAASHP said:
yeah you are right but by using good ROM you can flash it again and get working device Isn't it ??
Click to expand...
Click to collapse
Yes, but if you cook it doesn't make any sense.
right i have cooked another rom, today that has the programs in DEVICE folder.
And i will try it tomorrow
flyboyovyick said:
right i have cooked another rom, today that has the programs in DEVICE folder.
And i will try it tomorrow
Click to expand...
Click to collapse
After about a month of mind collaption, of nirvana entries, of psychodelic traffic over my neurons (I believe them are transistors), I'm flashing new my rom.
God help the boot.
aeroflyluby said:
After about a month of mind collaption, of nirvana entries, of psychodelic traffic over my neurons (I believe them are transistors), I'm flashing new my rom.
God help the boot.
Click to expand...
Click to collapse
Still cannot get the rom to work! maybe its too big?
flyboyovyick said:
Still cannot get the rom to work! maybe its too big?
Click to expand...
Click to collapse
How many free sectors do you have?
aeroflyluby said:
How many free sectors do you have?
Click to expand...
Click to collapse
How do i find that out?
flyboyovyick said:
How do i find that out?
Click to expand...
Click to collapse
when you'r at the last step, you'll get a notice about free/used sectors..the rom MUST HAVE 0001 Bytes to work, if its not then ROM is overloaded..also the ROM stucking at bootscreen can be a wrong XIP port or initflashfiles.dat error
o btw guys...
/me takes out his dusty but still working good hima and charges it
/me starts up his kitchen
/me cooks ROM
/me starts testing and uploading soon
im sorry i was away..but i havent had much time for cooking...univerity exams and wokring to support myself =/
hopefully i'm back for good now..
Well today i come a cross a c skekhar folder with a rom in it and a ExtROM folder:
then i read this in a .txt in that folder and it says:
Code:
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
C_shekhar
So iam going to do a bit of messing about and try and get this to work and stuff.
Just thought i would let you know!!
flyboyovyick said:
Well today i come a cross a c skekhar folder with a rom in it and a ExtROM folder:
then i read this in a .txt in that folder and it says:
Code:
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
C_shekhar
So iam going to do a bit of messing about and try and get this to work and stuff.
Just thought i would let you know!!
Click to expand...
Click to collapse
It does not make any sense, because I didn't manage to unlock extrom in 6.5 to perform normal reading (i will try tomorrow). I also cook 6.1 too.