My bootloader dosent work - XPERIA X1 ROM Development

the tri colour thing comes up but after that it freezes on the loading screen I am running windows mobile 6.1 (came with phone).(sony Erricson Xperia x1i

mikebuckley888 said:
the tri colour thing comes up but after that it freezes on the loading screen. any fixes would be much apperichated.
Click to expand...
Click to collapse
for starters: retry w/o sd card
and add a little more info on how your phone is setup and what you already tried or not, no thought-readers out here (that I know of)

Does it say anything in perticular when it freezes? If you'd manage to by accident fail to flash a rom you might have this issue saying something about updating rom.

My refrigerator also doesn't work...
no serious dude, first read before posting.
And if you don't get out, give us so much info so that we could help you.
Good luck

maddude88 said:
Does it say anything in perticular when it freezes? If you'd manage to by accident fail to flash a rom you might have this issue saying something about updating rom.
Click to expand...
Click to collapse
Yep it has the loading screen with three dots.
(thanks veryone for you help)

have you hard-spl'd?
or is this what your trying to do?

yeah thats what i'm trying to do

Jonny4911 said:
have you hard-spl'd?
or is this what your trying to do?
Click to expand...
Click to collapse
yeah i'm trying to do that.

Related

Registry Wizard "exception" when I start it up...?

On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Re: Registry Wizard "exception" when I start it up
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Re: Registry Wizard "exception" when I start it up
ghostrida said:
jonazen said:
On starting Registry Wizard, I get a small "exception" dialog box centered on the screen. I click "ok", and it seems fine after that. Any ideas? (I'm using the new 2.17 ROM).
Click to expand...
Click to collapse
same here, same rom, you should probably post this in the Regwizard thread though to get an answer
Click to expand...
Click to collapse
Thanks -- I had convinced myself that it was my fault, for first trying RegistryWizard without loading the OPENNetCF library to the MDA first. But if you got the problem too, then it sounds like a more substantial issue.
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
stormryder said:
I'm upgraded to the latest ROM and not a problem. You have the "extra" DLL files loaded in the program directory?
Click to expand...
Click to collapse
Not sure what these are...is this something needed beyond the OpenNetCF install?
yeah, please elaborate on these "extra" dll files. I loaded the openNETcf to the main memory of my device, that was all i had to do in the past.
regiwzzzzzzz
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Re: regiwzzzzzzz
thanas said:
HI PLEASE CAN SOMEONE HELP ME ASAP!!!!!!! REALLY SERIOUS PLZZZ, after using registrywizard device shows blank screen during boot up HOW CAN I FIX PLZZ i will give u tomtom5.21 or what u n eed just plz help
Click to expand...
Click to collapse
Not sure if there's anything you can do short of a hard reset -- but that should be the worst I imagine. This will restore the phone back to what it looked like right after booting up the first time with your ROM installed.
thank god i fixed it love the worl
thanas said:
thank god i fixed it love the worl
Click to expand...
Click to collapse
How did you fix it?
first the call button after the hardreset didnt work for some kind of reason so i thought it wouldnt hard reset

re flashing

hi,
i re flashed my phone last week and want to do it again as i have tried all sorts of programs and removed some and i think all of this has slowed my phone down and i have been getting a few problems so what i want to know is can i just re flash or do i have to do HardSPL again before i re flash ?
Tony
morpheus95 said:
hi,
i re flashed my phone last week and want to do it again as i have tried all sorts of programs and removed some and i think all of this has slowed my phone down and i have been getting a few problems so what i want to know is can i just re flash or do i have to do HardSPL again before i re flash ?
Tony
Click to expand...
Click to collapse
did you already hardspl? If it was successful its a one time only operation. You should not have to do it again.
P1Tater said:
did you already hardspl? If it was successful its a one time only operation. You should not have to do it again.
Click to expand...
Click to collapse
hello,
i did do the hardSPL but i was getting the white screen and had to do the other method which i forget which why it was but i am running Duttys rom at the moment.
i see that Dutty has a new Rom out now anyway so i might as well give that a try.
i want to use pocket plus and pocket weather on this ROM should that be ok
Enter bootloader mode for me and tell me exactly what it says.
Hold donw the camera button and at the same time insert the stylus in the reset hole until you enter bootloader
KAIS130 MFG
SPL-1.0.olipof
CPLD-8
morpheus95 said:
KAIS130 MFG
SPL-1.0.olipof
CPLD-8
Click to expand...
Click to collapse
your good, rock on.
ok thanks,
so all i need to do then is like before download the new Rom and open it ?
morpheus95 said:
ok thanks,
so all i need to do then is like before download the new Rom and open it ?
Click to expand...
Click to collapse
Yep. just flash away.
thanks for your help
P1Tater said:
Yep. just flash away.
Click to expand...
Click to collapse
That's 2 consecutive threads I've read with your posts in them and not a flame in sight - man, you need a holiday
ach2 said:
That's 2 consecutive threads I've read with your posts in them and not a flame in sight - man, you need a holiday
Click to expand...
Click to collapse
You might be on to something. Actually, upon suggestion by one of the mods, I have been updating the Kaiser FAQ and I realized it was quite hard to follow since more than half of it wasnt in Q&A format. I sure could use some help with it. Im about to pull my hair out. I might go on a rampage here shortly though.
P1Tater said:
You might be on to something. Actually, upon suggestion by one of the mods, I have been updating the Kaiser FAQ and I realized it was quite hard to follow since more than half of it wasnt in Q&A format. I sure could use some help with it. Im about to pull my hair out. I might go on a rampage here shortly though.
Click to expand...
Click to collapse
I'm a bit of a twat at some of this stuff, but if you need help - maybe easy stuff like proof reading etc, send me a pm.

Stuck in RED, GREEN, BLUE, WHITE screen

Hi. I already did a search for this but didn't find any help for a Herald.
I tried updating to 6.1 and it would not work. It would start to install but then crash and start over again. I probably tried 20 times and it would not work...not my phone is stuck on this screen with Red, Green, Blue and White stripes. Is my phone dead? Is there any hope? Thanks in advance!
This question is asked at least one or 5 times a week. Please search.
If your SPL still says 4.0.0.0, just flash another ROM. Assuming you have HardSPL setup or you were using USPL.
If your SPL says 1.0.0.0, then follow this.
Sorry like I already mentioned in my post I could not find a thread specifically for the Herald so I made a post.
My screen says IPL 4.26.0002 and then SPL 4.26.0000.
galva said:
Sorry like I already mentioned in my post I could not find a thread specifically for the Herald so I made a post.
My screen says IPL 4.26.0002 and then SPL 4.26.0000.
Click to expand...
Click to collapse
There's a million threads on this for the Herald.
Anyhoo, have you tried just reflashing back to the stock ROM or another ROM?
Tell me exactly what you did to flash.
Went to T-Mobile site. Typed in my phone's info and downloaded the 6.1 update for Windows Mobile...followed the instructions to install. It would start installing and then stop or crash I can't remember exactly. But I tried many times. I called T-Mobile and they said I had to get a new phone. I've never flashed my phone or anything like that...I had Spb installed on it and that was it...
Well I took out my ol Wing and tried to do the update once again to remember what error I keep getting.
The update starts to install on my Wing as the bar loading bar starts to fill it stops and then tells me an error has occurred.
ERROR [262]: UPDATE ERROR
Some type of communication error. But I can recover. So I do and then I try again. I've done this like 20 times before. I don't know if that helps any but thats my problem...
First, find hardspl and flash then flash rom
galva said:
Well I took out my ol Wing and tried to do the update once again to remember what error I keep getting.
The update starts to install on my Wing as the bar loading bar starts to fill it stops and then tells me an error has occurred.
ERROR [262]: UPDATE ERROR
Some type of communication error. But I can recover. So I do and then I try again. I've done this like 20 times before. I don't know if that helps any but thats my problem...
Click to expand...
Click to collapse
Sounds like there's a problem with your computer talking to the phone. Try taking tmobile's ROM, take out the NBH, rename it to HERAIMG.nbh and place it into your SD card (formatted to FAT32.) Then turn on your phone while holding the camera button.
galva said:
Went to T-Mobile site. Typed in my phone's info and downloaded the 6.1 update for Windows Mobile...followed the instructions to install. It would start installing and then stop or crash I can't remember exactly. But I tried many times. I called T-Mobile and they said I had to get a new phone. I've never flashed my phone or anything like that...I had Spb installed on it and that was it...
Click to expand...
Click to collapse
Tmobile has a 6.1 update?
galva, which windows do you use? XP or Vista?
igord said:
galva, which windows do you use? XP or Vista?
Click to expand...
Click to collapse
Wow guys thanks...I'll give these a try. I am using BootCamp to read my phone.
ivanmmj, do I need format the card using another phone or can I use a card reader. I don't have another phone I could use.
galva said:
Wow guys thanks...I'll give these a try. I am using BootCamp to read my phone.
ivanmmj, do I need format the card using another phone or can I use a card reader. I don't have another phone I could use.
Click to expand...
Click to collapse
You can use a card reader.
Smoke362 said:
Tmobile has a 6.1 update?
Click to expand...
Click to collapse
No. It's a 6.0 update.
I was updating from 6.0 to 6.1 and I am running XP in Bootcamp.
ivanmmj said:
Sounds like there's a problem with your computer talking to the phone. Try taking tmobile's ROM, take out the NBH, rename it to HERAIMG.nbh and place it into your SD card (formatted to FAT32.) Then turn on your phone while holding the camera button.
Click to expand...
Click to collapse
Wait...so I'm a noob...T-Mobile's ROM? Where do I get that? Do you mean the update file that I downloaded from T-Mobile? Thanks again!!! I hope this works! And will MS-DOS FAT work when I format the card? I am using Mac's Disk Utility and I don't get a FAT32 option.
Well I think I have the ROM actually. It's an EXE file so I'm not sure how I can go into it and rename a file inside of it. Sorry...my noob is showing huh? Here's what I downloaded awhile back that I think is the original ROM you are talking about.
RUU_Atlas_TMO_US_4[1].10.531.3_4.1.13.37_02.83.90_Ship.exe
IT WORKED! Thanks!!!!
galva said:
IT WORKED! Thanks!!!!
Click to expand...
Click to collapse
No problem. ^_^ Glad to hear that it worked. Were you able to flash it through a FAT format? Or were you able to format it to FAT32?

Please help, I think I bricked my phone :(

Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...
localcall001 said:
Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...
Click to expand...
Click to collapse
hi if you have done the hardspl then try this
to enter Bootloader
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
you should see serial at the bottom of the three color screen then plug in the usb cable the serial should change to USB then just flash another rom.
i hope this helps you.
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
only to pleased to help I am glad you got your phone back working
localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
idd, this is not ROM related, its just unlucky like hell. See the phone as a PC, where blocks need be written. If a block fails or is corrupt, you get these jokes. Its like a BSOD on a Windows PC.
I gotta admit it is great knowing that once you've done a hardspl you are safe as houses as even if you flashed the most currupted ROM, the bootloader will always allow a reflash.
This is way more stable and safe than any other experience I've had of phone flashing.
b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Funny that, your latest ROM was the only one I had problems with - the same problems as the original poster, in fact. I flashed a different ROM fine, re-downloaded your 2.0 and flashed it again, same problem. Hanging on the boot screen.
b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Probably I think I was just unlucky. My fear (while I was panicking) was that your ROM is European based, and since mine came from T-Mobile, it didn't mesh well. I also didn't unlock my phone so that could be also be a problem...
awesome community
localcall001 said:
That's a really cool recovery feature from HardSPL...
Click to expand...
Click to collapse
well..this is a normal recovery feature for stock spl also
Same Issue
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo
wahida76 said:
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo
Click to expand...
Click to collapse
no one have told me that on my thread... only here i found this issue.. and finally how pass the problem?
I had to re-flash a different ROM.
I'm wondering if it's related to the radio version...
what is your version of radio
can't you flash the latest 23060?
i use radio 3.36
I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.
Alas, no luck with that one either.
I have no idea why it doesn't seem to work on my Rhodium :/
I'm sorry if I'm hijacking this thread but it's the only one I've found that's even close to having the same issue I have, though I'm still using the stock rom/os.
I was installing winmo msn messenger. It installed fine and reset my tp2 fine. It goes thru the tp2 splash screen, the verizon splash screen and the winmo splash screen. Then it shows owner information and this is where it gets screwed up. Owner info will stay up forever if I dont touch the screen. After touching the screen the only thing left will be the top bar and the rest of the screen stays black. The only things on the top bar are the signal icon (which always has an x), the wifi icon (which seems to be connected fine lol) and either owner info will still be in the upper left or the start menu will be there. Hitting the screen only causes my tp2 to beep.
Nothing I know how to do (which is basically just hard and soft resetting it) works. Verizon can't fix it (didnt think they would be able to) and I can find no drivers (possibly cause I'm still a noob with winmo) to resolve my issue. I'm not even sure how I'd get them on as it wont even sync up to my computer and my computer cannot find its hd. If I could get a rom for the verizon one I think I can figure it out from there with no issues...but htc website sends me to verizon website for support and vice versa. The htc wiki is the closest I've gotten to an answer...but no rom to download. The only OEM roms I can find anywhere aren't for this phone, unless one of those will work? You guys are the experts.
Does anyone know what I can try? Verizon wants me to return it but cannot tell me when I'll get my new one as they are out of stock...again. Please help lol! Thanks for any and all help.
Mr.Clark said:
I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.
Click to expand...
Click to collapse
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)
b16b said:
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)
Click to expand...
Click to collapse
Sorry, I tried that one as well yesterday. And I've downloaded your ROM a few times too...
Are you still working on the 6.1 ROM? Maybe a new version will just magically start working for me...
EDIT: Tried a fresh 3.46.25.30 and a fresh download of your ROM. Still nothing

htc tytn ii dead HELLP

Hi, I'm new the forum and we try to solve a problem on my TyTN II.
The phone lights up in image windows where Oreste and says delete phone memory then goes out and no longer lights.
Please if you can help me with my problem what can be done.
enter bootlader but is not recognized by computer
welfare payments is all original.
Thank you
Flash stock rom via sdcard
Please if you can tell how to do
Thanks
Thanks
by searching for the info.
Mr. Clown said:
Flash stock rom via sdcard
Click to expand...
Click to collapse
I did get stuck when loading, Loading written remains.
What must be done or if there is something to do?
Thank you
1xx said:
I did get stuck when loading, Loading written remains.
What must be done or if there is something to do?
Thank you
Click to expand...
Click to collapse
Have you checked out that is not a battery issue? Try another battery
Mr. Clown said:
Have you checked out that is not a battery issue? Try another battery
Click to expand...
Click to collapse
I changed the battery and still remain locked when the load goes.
What to do? It can do anything?

Categories

Resources