Related
now obsolete
new aku2 here
http://forum.xda-developers.com/showthread.php?t=279908
so am i right in presuming that the gprs settings and phone settings are present in the rom? if not, how do we find them?
ALSO:
T-Mobile are releasing a rom update this month (ie this coming week!) so it might be worth looking at what they have done, not just for wifi fix but any other maintenence changes. Apparently they do alot of testing on their roms so there might be useful stuff there.
t-mobile gprs and wap settings are part of the extended rom. the 3 cabs files that begin CAB-Customization-...
i didnt include them as i'm on O2. This is more like a 'Qtek' version for the charmer, a universal version. doesnt include any operator specfic content.
looking forward to that update, hopefully its aku2, everyone else is releasing theres at the moment.
SDIO
What about SDIO drivers in this debranded OS?
so if i back up my current rom cabs and then install this, if it all goes pearshaped, i can relaod the origional and not end up with an expensive paperweight?
i wanna do the deed, but am scared as hell with it being my first PPC and only a few weeks old at that.
but anything to speed it up, its like im running windows or something.......
oh!
:wink:
only way you could mess up is if you pull the plug or have a power cut! while uploading the new os. remember to backup all your contacts and stuff as you'll need to hard reset.
you can start all over again if it doesnt boot or something by using the install package on the t-mobile site
http://t-mobile.iris-global.com/download_manager_mda_com2.html
just go into the phones bootloader, with the phone off, hold down camera and plug in the sync cable until the 3 color boot screen comes up and run the install package to go back to factory.
It worked!!
Dear dave106 and all;
i tried your fantastic upgrade yesterday. This was my experience:
1- I works like charm!
2- you might find it easier to use Total commander to uncheck 'system' and 'read-only' in the properties of the windows folder on your charmer, before Unlocking CID (to avoid any error).
3- alternatively you might use Lockiwiz 2b from this forum to unlock and unlock CID first.
4- the ROM upgrade went fine, showed some error messages on the charmer screen (nothing to worry about) but did not indicate an end. I unplugged it after 20 minutes. It rebooted on itself et voila, it was up and running.
5- Changing the boot scrren went very smoothly.
6- I noted that the T-mobile customization (after the new config.txt) did not install at all. I had to manually install the CAB listed in the config.txt file to reload the MMS and GPRS settings.
But now my charmer has no T-mobile crap on it...
However, i did not notice any dramatic change in speed....
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
supreme2k said:
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
Click to expand...
Click to collapse
thats a wizard, so you can just cid unlock it and install the imate or qtek wizard roms. the mda compact 2 is unique to t-mobile no other operator has it.
aeh....your sentence sounds strange to me, is it possible for my device or not ?
supreme2k said:
aeh....your sentence sounds strange to me, is it possible for my device or not ?
Click to expand...
Click to collapse
lol, in a word, no.
i am from czech and i dont understand all of this.
This is OK? or only any idea..
is really decustomization my mda compact II? I have tmobile
(i dont can it)
i flashing new rom....
after 10minutes say my mdac "aplication repllog.exe dont start"
...update is OK, and i have second problem
when customization is start it said " \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB"
DOESNT IT, I DONT HAVE THIS FILES IN EXTENDED ROM ++
and third problem, my storage card doesnt work ( i have2gb pretec...
only after the update
dead link
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
funkus said:
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
Click to expand...
Click to collapse
Funkus,
did you try wifi sdio with this debranded rom?
tnx
Re: dead link
Dzim said:
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
Click to expand...
Click to collapse
try it now, some tit nuked the uploads again
Got the Rom Working, the difference is quite noticable. Re wrote the extended ROM to auto customise just enough to get the MMS and GPRS to work correctly. Did any one work out if a WiFi card SD card will now work?
Would like to know before i buy one!
Re: dead link
dave106 said:
try it now, some tit nuked the uploads again
Click to expand...
Click to collapse
Thanks a lot, I have spent few hours searching the Web for this file, but couldn't find it. Thumb up!!
Dzim
aWizard not reconizing os.nba
Hi,
have followed instructions as above but when I go to write new rom it can't find os.nba.
Anyone have any ideas on what i'm doing wrong or what to do next?
I'm a noob, obviously :roll:
Hello to all,
Can it someone explain to me in steps how I can install WM6 on my HTC3600?
Currently is on Germany language, but I would like to switch it on English.
Thanks a lot on your help.
Regards
1) decide which rom you want (I used LVSW)
2) go to the thread and read 1st post
3) grab the 3 files attached
4) they are zip's, extract each to thier OWN folder.
5) go to each folder IN TURN as listed in the thread and run ROMUtilityUpgrade that is enclosed IN EACH folder.
STOP between each folder / Upload to phone and check your phone
THE VERY first one HardSPL MAY give an error, HOWEVER just run it again, seems ActivSync throw a fit and then the computer has to re-connect, HOWEVER after that off you go.
ALSO use NON-Vista machine
deech said:
1) decide which rom you want (I used LVSW)
2) go to the thread and read 1st post
3) grab the 3 files attached
4) they are zip's, extract each to thier OWN folder.
5) go to each folder IN TURN as listed in the thread and run ROMUtilityUpgrade that is enclosed IN EACH folder.
STOP between each folder / Upload to phone and check your phone
THE VERY first one HardSPL MAY give an error, HOWEVER just run it again, seems ActivSync throw a fit and then the computer has to re-connect, HOWEVER after that off you go.
ALSO use NON-Vista machine
Click to expand...
Click to collapse
HUH...YOU ARE REALLY FAST..THX...
SO...
1. what is LVSW? I will use same like you
2. i just need to connect my HTC with a PC and start applications from 1st thread? or before that I need to do something more?
go here http://forum.xda-developers.com/showthread.php?t=305250
grab the 3 downloads and put them safe
Extract each to it's own folder.
Do them in the order listed in the post ... HardSPL, Radio, WM6.
Enjoy
deech said:
go here http://forum.xda-developers.com/showthread.php?t=305250
grab the 3 downloads and put them safe
Extract each to it's own folder.
Do them in the order listed in the post ... HardSPL, Radio, WM6.
Enjoy
Click to expand...
Click to collapse
Really....THX!
It works man, thank you once more!!!!!
Can you give to me little help with a GPS tomtom 6....?
What I need to download and install?
No worries
What exactly do you want to know about tom tom?
First off I'll assume you are buying the software. In which case you want this
http://www.tomtom.com/products/product.php?ID=281&Category=2&Lid=1
now you dont have to buy it from them direct, however that is the product you want (it may be cheaoer elsewhere)
If it's already on a memory card.... just pop the card in the slot and it'll do everything for you.
I would HIGHLY recommend making a copy of the card contents to your computer, just use activ synch and explre the device till you get to the storage card then copy and paste the entire contents of the card to somewhere safe.......
Then EITHER push this up to a larger card or carry on with the card you buy.
Install Tom Tom home on your computer, it will then synchronise your maps and voices and stuff BUT more importantly it'll auto update your software for you.
You need to be running 6.03
in this version tom tom can be set to use "built in gps receiver" after that away you go... simple and Deech proof
edit for spelling mistakes
lol.. you are really fast....
can it be anything without buying orginal software or maps ?
It can and if you know where to look I am sure you will find what you seek young Jedi
I arent going to preach but note I did buy this software mainly for updates and technical back up
If you "acquire" the software read any threads / forums from the place where you get it from
Fast cos laid on the couch nursing a size 10 thick head after last night
ihihihihihi...
okay..... i will search... my the force be with me
Again problem,
Im facing with extremly battery drain, after charging standby was just 36 hours, before was around 5-7 days i think.
Is there any solution for this??
Thank you... Mr.Vader
An my young jedi, yes there is....... and if I can get it to work it should be attached to this post.... Also read the MuN RUS Rom thread it has been flagged-up thier with alsorts of solutions including this .cab
Drop it onto your memory card and ermmm run it
I get an corrupted image error when I try and flash the hard-spl?
Anyone know how I can get around this? tried searching for info and the search function just brang up unrelated posts, and theres nothing on the wiki despite it being a common problem.
So please forgive my stupidity, and enlighten me on how to solve this?
I have an M700 with shipped rom installed
Thanks in advance,
WWWeed
after i upgrade to wm6, how hard is it if i want to go back to wm5, how hard is it to downgrade? Do I have to back anything up?
back up contacts etc
back up ringtones etc
grab a rom with WM5 in / on it, and re-re-flash the phone, leave the radio rom as it was mind as it's seperate from the WM section
deech said:
An my young jedi, yes there is....... and if I can get it to work it should be attached to this post.... Also read the MuN RUS Rom thread it has been flagged-up thier with alsorts of solutions including this .cab
Drop it onto your memory card and ermmm run it
Click to expand...
Click to collapse
Ahhh great thanks.
Just what I was after.
As you are using the LVSW like myself you may have an answer to my other question.
Is there a .cab file to fix the awefull sound on WM6 and the trinity?
Media player is so quiet, if I can't fix it, I'm going back a stage to WM5 as I use the MP3 player side of it allot.
Many thanks.
Shaun.
Hi,
i have just loaded wm6 following the instructions here and now i am getting USB device is not recognized.
Can anyone suggest a solution?
Thanks
Stephen
are there any issues not completely solved on the available non-official WM6 ROMs for Trinity?
I'd like to upgrade mine, but only if all the initial problems have already been solved.
BTW, my Trinity came with TomTom 6 pre-installed. If I upgrade to WM6, will I have to purchase and install a new copy of the software?
All seems to work fine now, any issues then there will be a .cab file around here somewhere, main ones are ATIfix, when does somthing to make tomtom work nicely, power fix which address' some power useage issues.
The tomtom that come with the handset is a crippled try before you buy version (well it is here in the UK ) So ermmm yes, you would need to buy a full version, but on the plus side it's yours forever and no matter what you do to your phone you can always put it back Unless the tom tom is on your SD card in which case REMOVE the card before you start and re-install when you've finished rom-ing
Failed with upgrade to wm6
Hi all
I just got mine 3600 and tried to upgrade to wm6 with the 3 files. When I run the first hard-spl program I had problems with the connection with the usb cable. The program aborted after a second or so. Now I am stucked with this colured image with the text
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
is there any way for me to correct this. Or do I have to send the phone for repair?
Grateful for all help
/adam
Active sync doesn't get a connection to the 3600 anymore....
Read the second post in this thread, on page one, in the instructions I wrote it tells you THIS IS NORMAL, dont worry about activesync, when doing hard SPL the first time it regularly disconects and hangs the phone with the tri-colour screen, soft reset the phone and re-start the procees (ie run the first file again). That should see you right
hey guys,
just flashed my unlocked cingular treo 750 with the new wm6 row and was wondering if there was a way to perform an application unlock...
I have a few apps that are unsigned and it won't let me run them... it's extremely annoying..
any help would be greatly appreciated!
http://mobile.surrealnetworks.com/AppUnlockReg.htm
paypalbid said:
http://mobile.surrealnetworks.com/AppUnlockReg.htm
Click to expand...
Click to collapse
thanks paypalbid but it didn't work... Did you get it to work on your treo?
just checking.....you downloaded the one for PPC instead of Smartphone right ?
What applications are you trying to run that required the phone to be app unlocked ?
Since i upgraded to WM6 i have not had problems with app unlock
If all fail why dont you just edit the registry your self by:
HKLM>Security>Policies>Policies
value = 0000101B DWORD = 1
paypalbid said:
just checking.....you downloaded the one for PPC instead of Smartphone right ?
What applications are you trying to run that required the phone to be app unlocked ?
Since i upgraded to WM6 i have not had problems with app unlock
If all fail why dont you just edit the registry your self by:
HKLM>Security>Policies>Policies
value = 0000101B DWORD = 1
Click to expand...
Click to collapse
well for now I'm just doing a few tests with some app I developed and it just won't let me run it because it's unsigned..
I installed the cab file that automatically adds that key, restarted the phone and then I made sure it was there, and it is..
any ideas why it's not working?
try this:
HKLM\Security\Policies\Policies001001 has a value of 1, NOT 2
sahmedkh said:
try this:
HKLM\Security\Policies\Policies001001 has a value of 1, NOT 2
Click to expand...
Click to collapse
tried that and tried changing the value of 00001005 from 16 to 40 as suggested on another site but it still didn't work...
this is really annoying... can you guys give me a list of unsigned apps that I can try just to be sure it's not my own app that isn't working?
Download Wm5 Storage which is the last application on the list, it requires app unlock
http://mobile.surrealnetworks.com/MDAapps.htm
paypalbid said:
Download Wm5 Storage which is the last application on the list, it requires app unlock
http://mobile.surrealnetworks.com/MDAapps.htm
Click to expand...
Click to collapse
well I'm not sure if it worked or not... it installed but I don't see any new apps
unsigned apps
The Hermes Tweaker 1.1 has a check box that allows you to run unsigned apps. You might need that if I'm understanding what you wrote.
Hi,
I loaded up Jack_V3 ROM today and he pointed to your page to download the Manill HD cab to update the icons he used.
I notice above a similar message to the problem I am having below but I am installing the full package.
i am having a probelm with changing the Icons used back to the stock ones. I downloaded Touch-IT blackstone manilla but I get an error reporting:
the program or setting cannot be installed because it does not have sufficient system permissions.
I have searched for hours and also tried Multiple Registry changes and HTweakC, SurrealNetworksAppUnlock etc.
Anyone, please shed some light as I have a call logged with my provider to get the phone unlocked. Is that the issue. PLEEEEEEEAAAAAAAASE.
hispeed_mike said:
Hi,
I loaded up Jack_V3 ROM today and he pointed to your page to download the Manill HD cab to update the icons he used.
I notice above a similar message to the problem I am having below but I am installing the full package.
i am having a probelm with changing the Icons used back to the stock ones. I downloaded Touch-IT blackstone manilla but I get an error reporting:
the program or setting cannot be installed because it does not have sufficient system permissions.
I have searched for hours and also tried Multiple Registry changes and HTweakC, SurrealNetworksAppUnlock etc.
Anyone, please shed some light as I have a call logged with my provider to get the phone unlocked. Is that the issue. PLEEEEEEEAAAAAAAASE.
Click to expand...
Click to collapse
OK. Trying to go easy on this phone and not treat it too much like a windows box. Seem the more I refrain the more posts I have.
Seems that the other ROM had manilla.exe running. Killed that with the phone service and some others and the cab installed fine.
Hope that helps someone else. Hats off to the Developer.
Does anyone have a cab installer to change the clock to black on white? instead of the white on black.
Thanks guys
hi all, I just got my wife's old tilt. No software or ROMs have been updated on this device at all and I'm curious what updates anyone can recommend that I install.
I did read through the WIKI and it was hard to tell what is the most recent updates available. Nothing is really working incorrectly on the unit, I just want the newest, fastest software/rom etc installed.
is there a windows mobile update that I should install? I saw some references to touchflow 3d working on the tilt, is this worth installing?
I'm starting from square one here and am looking for some general info which is why I posted in this room as opposed to the software or rom rooms. Any info would be great. thanks!
taz
The first thing you need to do is back up your phone. You can sync your or what I would do is use back up your data to your card. DO NOT USE SPRITE BACKUP THAT IS ON YOUR PHONE! I did this and could not get it to restore to my phone. Use PIM Backup. You can get the cab file by doing a search on the software thread.
I just upgrade my rom on my Tilt 8925 last week and I used build 23069 and I really like it so far. Make sure you also download the Jumpspl56,Jumpspl93 and Jumpspl94 file. You will have to add that to your phone first and I used the Jumpspl56 file. I did not have a problem with it.
Read the Wiki it will help so mucn and there is also YouTube videos on it. When looking up the information look up Kaiser. I also used this web site for help.
http://blog.contriving.net/2009/06/18/upgrading-your-att-tilt-to-windows-mobile-6-5-tutorial/
Good Luck
thanks Biloxigirl! do you know if I can put a new version of windows mobile on the device? I've read that some people have updated to 6.1 but do not want to update to 6.5 because it lacks good support for landscape mode?
taz
It all depends what you want? You can flash any Kaiser ROM after Hard-SPL [Resources] Flashing Your First Kaiser Rom (For Noobs) , there are many 6.1 ROMs to choose from and even though M2D doesn't support landscape well it can be disabled via today settings, not sure what you mean about landscape support on 6.5 as Chome has full lanscape compatability.
Good luck
tazmajazz said:
thanks Biloxigirl! do you know if I can put a new version of windows mobile on the device? I've read that some people have updated to 6.1 but do not want to update to 6.5 because it lacks good support for landscape mode?
taz
Click to expand...
Click to collapse
I upgraded from 6.0 to 6.1 with no problems. Now I have 6.5 and LOVE IT. Not sure what you are talking about landscape.....I have had no problems so far with anything in landscape.
Can you run 6.5 on the Tilt?
How much memory do you end up with?
ikepigott said:
Can you run 6.5 on the Tilt?
How much memory do you end up with?
Click to expand...
Click to collapse
yup, look in the rom dev forum.
when reading these steps from the tutorial, am I suposed to pull out the battery while the device is still powered on or should I turn it off first?
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
taz
tazmajazz said:
when reading these steps from the tutorial, am I suposed to pull out the battery while the device is still powered on or should I turn it off first?
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
taz
Click to expand...
Click to collapse
Doesn't matter, the idea is to kill all processes. Either way will achieve the end result.
gotcha, thanks Denco
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.