o2 Updrade - Camera dead - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Have upgraded to the latest o2 UK s/w (I'm a chicken for the hacked WM2005 versions for the mo) details below:
v1.40.237 are:
* O2 Active UI v3.6.024
* Bluetooth build 3900
* Radio build 1.12
* Windows mobile CE version 1.40
* BlackBerry Connect v2.0 for Enterprise Mail (BES)
* Removal of Photo Contacts
And now when I try to start the camera I get an error claiming it's not able to start preview mode (as per attached photo).
Any ideas?
-FM

Hi mate,
I had the same fault with my xdaIIs on vodafone, I used activesync and my cradle , downloaded the file below and copied and pasted it to program files in the pda. then navigated to the file using the pda and tapped on it , it self extracted and after a soft reset the camera worked.
I would imagine this would work for you.Bear in mind I am no expert.
Good luck.

Superb, cheers halflife. That's sorted it.
-FM

halflife said:
Hi mate,
I had the same fault with my xdaIIs on vodafone, I used activesync and my cradle , downloaded the file below and copied and pasted it to program files in the pda. then navigated to the file using the pda and tapped on it , it self extracted and after a soft reset the camera worked.
I would imagine this would work for you.Bear in mind I am no expert.
Good luck.
Click to expand...
Click to collapse
I've got the same problem.But I can't see the file.Pls upload it again.thank in advance!

Just checked... The file's still there for download so long as you are logged in ...
-FM

Related

Qtek 9090 ROM upgrade and bluetooth license expired

I have a 9090 bought in Dubai. I am now getting a bluetooth expired message and the imate help desk told me that I must get a ROM upgrade from the Qtek suppliers. Problem is that they all give a country error. Is there a patch for the bluetooth expiry problem? Is there a ROM upgrade that is open for all Qtek 9090s? thanks Bill
You may just try the BT upgrade to 3900 (file on FTP server) or try to correct the Country error with GetDeviceData.exe also on the FTP site plus the instructions of the other thread about upgrading QTEK
Joao Caldeira
Sorry, but the 3900 does not seem to work (at least out of the box)
Just tried it and started to receive that message.
Joao Caldeira
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Thanks.
I'll try it as soon as I have my cradle.
Joao Caldeira
Hi.
No more License expired message, but I'm not being able to pair with my BT Headset HBH-660.
Maybe I'm doing somethiing wrong... I'll check it out...
Thanks,
Joao Caldeira
OK.
Paired the device. When trying to "connect" the QTEK showed failes.
Turn BT off and on and everything is working.
THANKS
Joao Caldeira
BT_key
I copied the two extracted files over to myQtek 9090 and opened the exe file. A list of BT addresses came up and a write key icon. When I try to select a BT address and write it, I get the following message: ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail!
Am I doing something wrong - I copied the files into my documents on the 9090 and ran the exe file through file explorer on the Qtek.
Thanks,
Bill
BT_Key
Thanks. This solved my problem.
I was getting this message everytime I turned bluetooth on:
Sorry! Bluetooth can no longer be used because the license has expired.
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73C0A8B9A9074DD3B175
3515CD8
For some reason after a System ROM upgrade, my bluetooth device showed what it looks like a mac address as 00:00:00:00:00:00. This tool fixed the problem.
For anyone that is running into the Bluetooth License problem please try this.
DJ
Yes it does.Seems after upgrade BT have no mac adress so this "thingie" writes it down in some register.Any way done job for me.
Damn.. same thing happened to me today (
Reset time\soft reset not work
the fix when i launch i get "ResetMFG(). DeviceIoControl(). FL_IOCTL_BDK_OPERATION fail! " too..
Is there another way to set up a mac address? :O
Chooo
Upgraded to 3900... still 00:00... BDA and that fix program doesn't work!
Chooo
well in WM2003 rom they use old versions of the Bt stack thats why it shows license error
Ok.. but.. it's normal as answer? ^_^;;;
No mistaken.. thx for let me know this.. but danguard is already dead here in italy.. how the hell can i fix? I dont want to install a wm5, there isn't a way in registry to rewrite BT?
Chooo
The BT update worked for me.
FYI
I have tested 3900 and now 3500... nothing..
i want to try other stack,like this : OEM_WWE_160_600.sa.CAB
but.. how can i delete used file "audioGW.dll"?
Chooo
mamaich said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
I just want to give a short feedback.
I was experiencing the license-problem since a ROM-Update failed and my extended ROM was deleted. After hours of resaerch I finally found your post and I have to thank you very much! With this small file now everithing seems to work as it should again!
I can only recommend it to everyone with the same problem!
Greetz from Germany!

TomTom for my Wizard?

Up till last week I had a T-Mobile MDA Compact and I'd got Tomtom (bakonl) running. Now I have a Wizard (T-Mobile from The Netherlands) and I can't install the Tomtom. Appears that WM2005 not compatible with Tomtom Version 5. Anyone got a plan to get arround this? :?:
To install TTN5 on WM5 you have to copy the cab files directly to pda and launch it with the pocket explorer (or resco explorer).
a bit more info to install tomtom and get it working
http://forum.xda-developers.com/viewtopic.php?t=29606
Thanks for the responses guys. I've given it a go and moved the cab files from the CD to my SD card and installed the GPS cab first. Then soft booted the Vario and then attempted to install the TTN cab.
All per the post :-
http://forum.xda-developers.com/viewtopic.php?t=29277&highlight=ttn
However... Still won't install correctly...
Am I doing something wrong?
Any more advice gladly received.
Thanks,
you need te get the tomtom 5.1 files then it works fine. I've got it working on my bleu angel with WM5, and today i installed in on my brother's vario and it worked just fine.
Thanks,
Can I ask... Where did you get the 5.1 files from?
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
otherwise just use a torrent search engine, you should find it in no time
dalamario said:
You can download TTN5.1 from the following link
http://www.tomtom.com/updates/ppcupd510.exe
Click to expand...
Click to collapse
You need the zip file not the exe. AS4 messes up the installation.
http://www.tomtom.com/updates/ppcupd510.zip
Dear All,
I found this update this week..
http://users.skynet.be/wallpaper/TOMTOM5.1.zip (for more info see http://tomtom3.web-log.nl/log/856067 around - Mondeo :: 20 september 2005 16:18 -).
Note : Download, unzipp... connect your PDA/Phone via Sync cabel/station, setup.exe run. (I have installed it over my (bakonl) 5.0 version.... !!!).
Note 2 : Can ONLY be used if you have a BeNeLux version of bakonl TT5 and only with the BeNeLux map (normal or plus).......
Success with the upgrade.
TomTom with WM6.1 on HTC wizard
Good Morning,
can anybody support me in trying to setup a navigation functionality on my HTC wizard, that runs WindowsMobile 6.1 (those TNT edition)?
Unfortunately i can't find up to date information about which GPS-hardware to use. Is BlooTooth the only reasonable solution for the wizard?
I also plan to feed the tachymeter signal from my bicycle somehow. Has anybody read of approaches to this and can cite or link?
Third thing I'm in search of is an alternative camera software. The "Camera for Pocket PC Version 3.00" does not support geoTagging and not even writing in the Tags for Titling, commenting etc.
Many thanks for your valuable hints in advance.
blausand

Another test: Wizard ROM ported to BA

Edited 26 jan 2006
I've uploaded a second test version of HTC Wizard's rom port to ftp://[email protected]/Uploads/Blueangel/wm5_test/wizard2ba_v2a_test.rar
(this is a v2 rom with a fixed camera)
USE THIS ROM AT YOUR OWN RISK!!!
This version is a complete Wizard's ROM including:
1. Working MMS client
2. Midi/mp3 ringtone support
3. DirectX mobile/Direct3D mobile (xscale-optimized 3D driver)
4. Built-in cyberon voice-dial
5. Wizard's battery indicator, device lock on today
6. Some cosmetic changes
7. 32 Mb RAM disk
8. Bug fixes from the previous version (for example now you can add picture to contact).
There is no need to install any of the old CAB-files with fixes on this ROM. All needed fixes are included in "EXTROM" folder.
The "EXTROM" folder has changed from the previous ROM version. You need to do a hard reset before using this ROM!
Known problems:
1. Bluetooth disconnect bug is still there. I have an idea, but would check it later.
2. The device cannot be used as an IR/USB modem. This can be fixed, but I don't have enough time.
3. It seems that midlet manager is not working. Probably this is a bug in original wizard's ROM.
Installation instructions:
1. Modify the operator as needed and if needed:
xda3nbftool.exe nk.nbf nk.nba -x 0x20040521
...read wiki...
xda3nbftool.exe nk.nba nk.nbf -x 0x20040521
2. Create "EXTROM" foder on your storage card, copy there the contents of EXTROM
folder from this archive. The full name of this directory on your device should
be "\Storage Card\EXTROM".
2. Flush the ROM
3. Make the hard reset (press camera+record+reset buttons, select "format storage")
4. Boot. During the first boot the CAB-files from "EXTROM" folder would be
installed. They are unsigned, so you should press "yes" when asked, and
install them to the default folder. This process would be silent on newer
builds of this ROM.
Note for modifying the EXTROM folder:
All CAB-files should have read-only attribute set. Otherwise they would be deleted after installation. This would be fixed in the future releases. And
Config.txt is renamed to Cfg.txt.
CAB files:
Missing-Files.CAB - must be always installed. Wizard's ROM is larger than ours, so several files had to be removed and placed to this CAB.
Default_CAB-shortcut-CDL-08Sep05.CAB
Default_cdl_wwe_version.cab
Default_ie_view.sa.cab
Default_SmartDialing_enable_0915_signed.CAB - these 4 are from original Wizard's ROM.
Camera2K5.cab - camera app and drivers
Note regarding "RAM Disk32". I recommend to move temporary internet files and install unnecessary apps there. Its contents would survive soft reset, but would be cleaned if the battery is removed. The RAM Disk driver is taken from www.buzzdev.net
Okay, so I got the ROM even before you posted this topic (after an hour you've uploaded it...yes, i do check the WM5_test folder on a regular basis, hehe) First impressions is that this ROM is fast, really fast, even faster than the Hima2BA port... I can't really call WM5 "slow" anymore now, it works very well. Gonna test it a bit more later today. And THANK YOU, as usual
Just turned on cleartype and the fonts looks a bit...I don't know...weird. I'm not saying that it is worse than in the older ROMs, it just looks different somehow. Or it's just me. Edit: yes, they *do* look different. I'd say they are nicer though...
install Camera2k5_1 ,it is owrking for camera , this rom fast than others, Pocker msn can't login " sorry, We are unable to sign you in to this service because we could not detect a valid server certificate. this can occur if the date on your device is different from today date.please check the date on your device and change it if necessary.
also missing phone icon at person settingn't set ringtone
hi mwang,can you tell me where can download Camera2k5_1 ,thanks
Mamaich, what can i say, outstanding, as usual...Testing now
great man...
picture and video application isn't working though :?
working awesome, does anyone know how can i install BT Tray?
thanks mamaich
In Phone, Options doesn't work, smartdialing doesn't work...
2. "ok" hardware button is mapped to "record" and this cannot be changed. Would investigate this.
Click to expand...
Click to collapse
Strange. In my device it's mapped to the OK button as in 2003..
Bugs that I found:
1. MSN Messenger does not work
2. Phone Option does not work
3. Unable to assign picture from contacts
4. MP3 ringtone does not work
5. Voice Command BT Headset Dial (by renaming voicecmd.exe to sddialer.exe) does not work
MP3 ringtones work for me
Phone, Options isn't there. comfirm.
Hope to have a fix for that soon.
This ROM is a bit faster, but still no match for wm2003se speed..
Another problem is that I don't seem to be able to connect to the internet using AS, is it just me?
Guess it's back to 2003 for now..
d3vil said:
This ROM is a bit faster, but still no match for wm2003se speed..
Another problem is that I don't seem to be able to connect to the internet using AS, is it just me?
Guess it's back to 2003 for now..
Click to expand...
Click to collapse
I'm back to 2003SE too, currently doing restore. Guess have got to wait for some patches. I must say the speed of this is better then any other WM5 version.
wlinsong said:
hi mwang,can you tell me where can download Camera2k5_1 ,thanks
Click to expand...
Click to collapse
over here http://forum.xda-developers.com/download.php?id=6645
I'll put together quickly a WiKi article with solution to the missing phone settings and such..stay tuned.
WiKi article with solutions and general info here (and also in my signature)
There are no notifications of current internet connection, i mean wifi bluetooth or gprs in the titlebar (like those in himalaya ported WM5)
There is still error when you press album icon in camera app, which can be fixed with installing album
The hardware button OK is mapped correctly , it works fine here
The record button is mapped as Voice Speed dial (the record app is there but doesnot work)
How can i get the tray icons of bluetooth and wifi ?
I like the new battery tray icon
Port to SX66
Great work Mamaich.
Installation was very smooth. The WIki solution to the missing phone icon was a big help. I prefer this version over the orginal WM5 or the himalaya version. I like the EXTROM installation. Not having a camera installed is a big help to SX66 owners, we don't have to deal with the sound issues. Finally got a midi ringtone to work with the wizard version, prior versions I had to convert the Midi to MP3. I have had it lock up on me a few times, but haven't figured out the cause yet.
Thanks again.

BTAVUI Error 0x37 opening WAV Driver wit TomTom6

After installing TT6 on WM2003SE, rebooting the system gives:
BTAVUI Error 0x37 opening WAV Driver wit TomTom6
TT6 modified \windows\BtCoreIf.dll and \windows\BtSdkCE30.dll
As a result, Microsoft Voice Command fails to run.
Anyone else has the same problem? Or know how to fix it?
With WM2003SE
Before TT6 installation:
BtCoreIf.dll & BtSdkCE30.dll are both Version 1.0.0.3900 from BroadComm Corp
After TT6 installation:
BtCoreIf.dll & BtSdkCE30.dll are both Version 1.4.1.74 from WIDCOMM Inc
I was able to replace the BtSDKCE30.dll, but the BtCoreIf.dll is always in-use and I can't overwrite it.
mr_ding said:
With WM2003SE
Before TT6 installation:
BtCoreIf.dll & BtSdkCE30.dll are both Version 1.0.0.3900 from BroadComm Corp
After TT6 installation:
BtCoreIf.dll & BtSdkCE30.dll are both Version 1.4.1.74 from WIDCOMM Inc
I was able to replace the BtSDKCE30.dll, but the BtCoreIf.dll is always in-use and I can't overwrite it.
Click to expand...
Click to collapse
You need to use the PC and explore to that file (also view hidden files) then rename to old to remove it
how do you get the 1.0.0 versions ?
Think i sorted it, rename BtCoreIf.dll to BtCoreIfold.dll and it now "seems" to work
BTW my error was on a dell axim
Bless you, I had the exact problem - no sound coming from any program. The volume slider on screen and using the hardware buttons would move but as soon as the Volume display was off the screen it would revert to zero immediately!
Thankyou for posting this - such a simple solution. Just changed BTCoreIf.dll as above/ soft reset and everything is back to normal.
O2 XDA IIi
Hi!
Same problem with an O2 XDA IIi, just after installing TT6 too!
And same solution!
Thanks a lot!
ipaq 6510c
I have the same problem, my BtCoreIf.dll file was located in my c:\windows\system32 folder, and there is no sign of the BtSdkCE30.dll file.
I've renamed the BtCoreIf.dll file, but still no sound
can anyone help with this?
ken
Jaleq said:
Bless you, I had the exact problem - no sound coming from any program. The volume slider on screen and using the hardware buttons would move but as soon as the Volume display was off the screen it would revert to zero immediately!
Thankyou for posting this - such a simple solution. Just changed BTCoreIf.dll as above/ soft reset and everything is back to normal.
Click to expand...
Click to collapse
hi! could you tell me how to get to BTCoreIf.ll please. if you could give me a step by step procedure on how you did it that would be great. Thanks in advance....
same like me.... pls can anybody give me how to get that.... i cant found it....

WM2003 > WM6 contacts etc problems ?

WM2003 > WM6 contacts etc problems ?
Hey ,
I just loaded WM6 on my o2 xdaIIs or Blue anger as you say,
now i have several issues in front of me:
1. the backup file ( 2 files individually created on WM 2003) from both " spb and x backup (inbuilt in WM 2003) " won't restore any thing i.e. contacts,Apps, notes anything on my new WM6.
i tried restooring from both the files but to no avail.
any solution how to get my contacts back.
Note: i didn't sync with my PC, so no contacts loading from syncing with pc
2. there's no send via bluetooth option in file explorer.
3. when dialing no.s from keypad of BA, the no functionality won't happen. i.e. only alphabets appear, but in WM2003 no.s did appear.
i guess you haven't really completed the upgrade to wm6. you should do the reset + no/yes/yes + mail button routine.
I already did the same, but the problem is from the beginning, is there any way i can get my contacts from the backup files back ???
and what about the keys issue !!! and bluetooth funda !
the only way is to switch back to wm2003 restore ur backup, sync ur contacts or save them on sim than put wm6 again get ur contact back.
Hi,
now i want to downgrade to WM2003,
but going to the wiki gets me confused, b'coz of the several ROM's there.
now the thing is i have O2 xda IIS, India, and i have the official O2 asia WM2003SE ROM downloaded from the website of O2, that has been made for my Mobile only, but now as i have WM6 and i guess while upgrading to WM6, i deleted the contry code etc...., so now the O2 ROM is not detecting my Mobile,
can anybody help me out here !!!
DO THIS
1. extract the file given below.
2. put the rom file which u hv downloaded from the o2 site (file=nk.nba) in the same folder where above files were extracted.
3. put ur pda in boot loader by holding Pwr+camera+rec+reset.
4. screen shows bootloader serial.
5. run maupgradeutilitynoid.exe (it will skip country id)
6. do a update by clicking next next and so on
I have something like this pb on my Qtek 9090. But i think after upgrade the contacts database is crashed cause any CM application terminates immediately after being launched:
NullReferenceException.
at
Microsoft.WindowsMobile.PocketOutlook.PoomStore.Di spoze()
at
Microsoft.WindowsMobile.PocketOutlook.PoomStore.Fi nalize()
ActiveSync refuses to synchronize contacts giving error 8007000E.

Categories

Resources