Today I had some talks with Risidoro and Asukal about changing languages on Roms without upgrading to a whole new Rom.
Risidoro introduced me to Asukal after a question from me about Rom Cooking.
After some talking with Asukal about his "UI Language Switch Program" for Universal he gave me some files that I tested a few times.
Right now I am running a fully stable Mr. Clean 2.24a AKU2.3 Rom with dutch language, so for all dutch folks, here you go...
UPDATE: Right now I am running the latest 2.26 T-Mobile Rom, without problems!
[EDIT FRIDAY, 28th JULI]:
FINAL INSTRUCTIONS (for now....)
Definitive instructions to change the English Mr. Clean 2.24a AKU2.3 Rom into the Dutch language
- Install the Mr. Clean Rom
- Install these 5 files, I installed everything to the Main Memory, I advice you all to do the same!
1) Wizard_AKU2_NLD_mui_Tool.cab
2) NLD_Notifications_WIZ.cab
3) NLD_Today_113.cab
4) DUT_SMS.cab
5) NLD_Registry_Changes.cab
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run through the (Dutch) Welcome Screen for screen alignment etc.
- Go to Settings -> Regional Settings (Instellingen -> Landinstellingen) and set it to Nederlands
- Delete the file \Windows\initobj.dat and rename \Windows\welcome.lnk to something like welcome.bak.lnk
- Delete the folder "\Program Files"
- Delete the folder "\Windows\Fonts"
- Delete the folder "\Windows\Favorites"
- Delete the folder "\Windows\Programs"
- Delete the folder "\Windows\Start Menu"
- Delete the folder "\Windows\Start Up"
- Delete the folder "\Windows\PDFfonts" (optional, but I did it to get 2MB extra free space because I don't use ClearVue PDF!)
- Remove all English folders in \My Documents (EXCEPT THE TEMPLATES FOLDER, in this folder the Camera Templates will be stored!)
So you can delete the Camera Templates from \My documents\Sjablonen
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run these 2 files (located in this thread, somewhere below on the 1st page)
1) MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB
2) NLD_MMS_FOLDER.CAB
- Done!
Regards,
Molski
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Not good, i cannot remove or rename welcome.lnk.......
Any suggestions, tried total comander and the windows explorer...
edit: Solved the problem on my own: First with total commander tap'nhold --> properties and disable the read only checkbox.
then goto shortcut tab and edit this to something....
then it is possible te rename..
Yeah not beautiful... but it works so what the heck....
mccune said:
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Click to expand...
Click to collapse
It will work on AKU2.5 after some development from Asukal and some testing from me, offcourse when I got it working, you all will get it working
My litle contribution to this fantastic idea
For the Dutch T9 follow the next steps:
In the attachment are three files:
1 - dictprob.dat
2 - statdict.dat
3 - mssp2_nl.lex
Copy them to the \Windows dir and replace existing files.
Then make the following changes to the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Spell Check]
"Main_Dict"="\Windows\mssp2_nl.lex"
Restart your device and it should work like a charm
[edit]
The following location was not in my registry:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, and my device is decertified. When I change the properties or rename the file it looks like everything goes well. But when I refresh the file is still there.
[/edit]
Great contribution!!
The following location:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
has to be:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\Strings"
I'm almost ready with the CAB file that takes care of these registry changes, including the T9 stuff.
mccune said:
My litle contribution to this fantastic idea
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, en my device is decertified. When I change the properties or rename the file it looks like everything goes fine. But when I refresh the file is still there.
[/edit]
Click to expand...
Click to collapse
Uncheck the read-only for this file and then go to the properties and remove the entry, OR rename the file like I did to something as welcome.bak.lnk
Here it is, the CAB file with the registry changes, with the files for T9 including one extra file (autocorrect.txt) from a dutch Rom, for (I guess) spellchecking.
I installed the file on my device and got no problems, I don't wanna say it is 100% correct, but I really guess it is, so were heading for 5 final files for installing Dutch Language on EVERY Non dutch Rom
By the way...don't forget to delete the old English subfolders of My Documents guys
I love it to be Dutch
Looks great!
I don't mind that the welcome.lnk stays. It only lets you run the welcome screen once, in Dutch. After that it doesn't show up anymore.
I followed the instructions about the ReadOnly settings, but like I said it looks like it changes the name of the file. But after a refresh it's back again
Glad to be of some help concerning the Dutch spelling
I updated my NLD_Registry_Changes.CAB file.
Because the Camera has some problems, although I change the "Frames" string, every time you select a picture template the setting is resetted.
So the solution is to delete every English subfolder of My Documents EXCEPT for Templates (!!), but on the other hand, it's not a bad idea to have al the camera templates in a seperate directory
Where is the update cab file? is it the one posted above?
ny-hardcore said:
Where is the update cab file? is it the one posted above?
Click to expand...
Click to collapse
Yes, but please read the 1st again, I updated the post with final instructions (for now....)
I also tested this language Pack on the new T-Mobile 2.26 Rom and I can confirm it's also working on the new Rom.
My advice for now is, don't use the Mr. Clean Rom anymore, but the new T-Mobile 2.26 Rom and don't install the Extended Rom to keep it as clean as possible (or manually select what you want to install).
Hmmm... ..just came to tell you that I also run the latest T-Mobile ROM in Dutch now. No problems so far! 8)
I really find it very cool that we don't have to wait anymore for Roms in dutch!
We just grab the latest WWE Roms and turn it into Dutch, no problem
The Mr. Clean Rom was cool to test with, but I'm happy with the 2.26 Rom.
are there any other languages?
Nope, not explictit for the Wizard, only for Universal.
These packages that I am using now were custom created by Asukal especially for the Wizard!
is it possible to do the same thing for french ?
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
mccune said:
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
Click to expand...
Click to collapse
Yep....you're right on that
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
4. Install PPCPimbackup utility by Dotfred on your existing ROM and backup your SMS using that. And then flash the new ROM.The utility is available in this folder also.
C_shekhar
Click to expand...
Click to collapse
Hi C_shekhar,
I have two questions in upgrading your ROM and the ExtROM
1) How to do this step ->Mark all cab files as read only
2) Can i flash the ROM first, the copy all ExtROM files to the SD card, and then do a Hardreset -> i have done this but seems not work.
Thank you.
you can mark the files read only using a file explorer utility like resco explorer. and as long as u add the appropriate entries to config.txt whenever u hard reset the cabs will get installed.
n btw im sorry im not c_shekhar but i think the answers correct
xPreSiDenT said:
you can mark the files read only using a file explorer utility like resco explorer. and as long as u add the appropriate entries to config.txt whenever u hard reset the cabs will get installed.
n btw im sorry im not c_shekhar but i think the answers correct
Click to expand...
Click to collapse
thank you very much for your quick reply.
now i have reflashed the ROM and the ExtROM works now.
I am wondering why we have to hide the files in the ExtROM folder, as i found all CAB files still there after the installing.
another question: can we hide teh ExtROM folder not the files inside?
Thanks.
yeah sure again that could be done with resco file explorer or something similar... although i dont think hiding is one of the requirements. the only thing required is marking them readonly.
Since I upgraded my TyTN II to official HTC WM 6.1 ROM French, I noticed the following new big files in the Windows folder:
- EngDict.dat (947 Ko)
- EupDict.dat (1,49 Mo).
They are not system files.
I didn't install any additional dictionaries and couldn't find these file names in the forum or on Google.
Questions:
1) Does anybody also have these files?
2) They are obviously dictionaries (full of words) but what are they used for?
3) Can they be deleted without problems?
Thanks for your help.
I don't have either file in the Windows directory on my AT&T standard ROM.
I would consider renaming the files (or copying them to backup and deleting them.) I wonder if they came as part of another install you did.
They are the dictionary for T9
jackleung said:
They are the dictionary for T9
Click to expand...
Click to collapse
Hi misfitflt and jackleung,
Thanks very much for your quick answers.
As I don't use T9, I will keep a backup and then delete them.
Hello
1. I downloaded and installed ROM from sunnysoft - Diamond_HTC_WWE_EastEurope_2.03.479.2
2. I downloaded and installed language localization from sunnysoft - InterWrite_WWE_EastEurope_2.03.479.2
3. HR
4. After customization some CAB's are instaling but I am not able to install all CAB's.
Installation hangs out on CAB called "HTC_Diamond_5in1_EEU_2_03_VC...", that is language pack, this is also last CAB on the list. If i SR everything is ok, but im still have ENG version.
I tried many times with the same result. I want PL version anyone can help me solve it?
I also know many ppl form Poland and Czech notice the same problem...
I figured out something.
I unpacked InterWrite_WWE_EastEurope_2.03.479.2
There was a file called ExtendedPKG.cab.pkg i changed extension to CAB
Then i unzipped file.
I can't post pics im new user :
//imageshack.us/photo/my-images/26/htcmv.png/
I coped both CAB files. First one was install sucessful, second didn't - message pop up "Unable to install aplication. Please update your ROM device to required version before trying again"
But this is correct language pack for ROM version.
HERE is a unzipped version of language pack
//hotfile.com/dl/126016132/e6251d4/InterWrite_Diamond_2.03.479.2_unzipped.7z.html
Hello
i have spent the last 4 days trying every combination to get slideview working on my x1. and to no avail
I tried countless different files and different ways to download then in order and different tutorials.
I cant do it.
PLease can some1 help with a cab file or better instructions
p.s i am using 826x series rom with sense
I have no problems loading the panel manager and having it mapped to x button and with every single panel working along with the new android NEOFROYO
I am not new to this rom flashing and such but I just can't get this working no matter what i have tried.
please help me!
seriously no1 knows how
try following the steps and you will come to the same roadblocks as me
please help
i am trying to port the 2 registry files 1.Discretix DRM.reg and 2.xperia drm.reg
i am using sktool registry editor to import
when I try to import 1.Discretix DRM.reg my x1 reboots
when i import 2.xperia drm.reg the screen pops up a little box and says ported 1
is my x1 suppose to reboot itself on the first reg file?
AM I SUPPOSE TO COPY ALL 88 CAB FILES TO MY x1???????????
I AM ONLY COPYING THE DEPENDENCIES CAB FILES....... is that the problem?
WHAT DOES DEPENDENCIES MEAN???????
COULD IT BE THE ROM I AM USING?
I HAVE GOTTEN X2 PANEL MANAGER WORKING WITH ALL PANELS ON MY X1
JUST NOT SLIDEVIEW
I AM USING DIFFERENT PANEL MANAGER I FOUND ELSEWHERE AND IT WORKS FLAWLESSLY
So slideview still does not show up on my x1 with me doing the following
Heres a list of what i am doing
1st way:
ive downloaded and tried both the sixth release and fourth release files and the original release files as some of the files are missing in the 4th and 6th release.
I've tried this way of installing with both the original release and the files from the 6th release DID NOT WORK EITHER WAY!
Dependencies:
12_SEUS DRMWhiteList
15_Extra Fonts
2_Awox mediaCTRL
28_OEMNotif
42_SlideView Plugins
47_SlideView (of course )
64_Sony Ericsson XpFramework
65_PlayNow (sometimes it can't install, skip it)
70_EmzFilters
88_SlideViewDisableErrorMessage
DRMClient (!). Download, copy .zip contents to \Windows\ manually (using Resco Explorer, ...), apply *.regs.
Thanks to NighPlayer32
DRMClient is MUST-HAVE!
Then I have tried again both the original release and then tried the 6th release files to this tutorial in succession
DID NOT WORK EITHER WAY!
2nd way:
install panel manager R3AA :
1. install sdkcert
2. install panel manager R3AA
3. copy xpengine.dll to folder panelmanager
4. install PMLauncher
5. install Xkeyhandler
6. install X2PM
7. install activeXdeployment
8. install flashpanelAndMMIInstall
9. tilewave panel
install slideview
12_SEUS DRMWhiteList
15_Extra Fonts
2_Awox mediaCTRL
28_OEMNotif
42_SlideView Plugins
47_SlideView (of course )
64_Sony Ericsson XpFramework
65_PlayNow (sometimes it can't install, skip it)
70_EmzFilters
88_SlideViewDisableErrorMessage
then copy DRM client content \Windows\ and apply *.regs.
restart
i found this: http://forum.xda-developers.com/showthread.php?t=607465&page=2
and i think it might help you...(see the last post on this page)
now (if it helped or if you want) please upload a zip with all panels on rapidshare or megaupload, or anywhere as soon as possible...(and -obviously- post a link to them)
(sorry for any mistake)
greetings from Romania....
thanks but if you notice my post i do add that cab file thanks
Here you are: first install slideview next copy all the files with DRM HTC + X2 to windows/ next install fdc task manager and import xperia drm.reg then Discretix DRM.reg at the end restart your phone if it will not work download rom: lix-X2 v1 and extract from it SlideView.cab - older versions for 6.1
P.S. Sorry for my bad English
I GIVE UP!
everything i tried has failed
thanks
p.s i think its because it only works on a winmo 6.1 and not winmo 6.5 or 6.5.x
i am only guessing here
SlideView works without problem on 6.5 and 6.5.x look at XPure ROM
oh
sorry i was wrong then
that is the only place i have been able to use it
I had that rom with tf3d
then i found 826x and like that better i loaded panel manager and all the panels and they are working flawlessly
the only thing that wont work is slideview