Related
Hi @all
could it work to change the Language of my QTEK9100 via an language-pack?
I found one on another webspace, but I am not shure if that could really work.
Here the text from the install.txt-File:
THIS LANGUAGE PACK WILL WORK ON "nocert" ROMs ONLY!!!
Install
=======
1. Unpack Windows.rar into \Windows directory on your device
2. install the .cab on your device and softreset (not with reset button).
Uninstall
=========
1. Uninstall the cab
2. Rename all *0407.mui files to *0407.del
3. Softreset
4. delete all *.del files
Click to expand...
Click to collapse
Anyone an idea if that could work?
did anybody try this out?
Micha
I 've tried, but it didn't work
Where have you find the Language Pack for WM5?
Torsten
buzzdev I guess
Today I had some talks with Risidoro and Asukal about changing languages on Roms without upgrading to a whole new Rom.
Risidoro introduced me to Asukal after a question from me about Rom Cooking.
After some talking with Asukal about his "UI Language Switch Program" for Universal he gave me some files that I tested a few times.
Right now I am running a fully stable Mr. Clean 2.24a AKU2.3 Rom with dutch language, so for all dutch folks, here you go...
UPDATE: Right now I am running the latest 2.26 T-Mobile Rom, without problems!
[EDIT FRIDAY, 28th JULI]:
FINAL INSTRUCTIONS (for now....)
Definitive instructions to change the English Mr. Clean 2.24a AKU2.3 Rom into the Dutch language
- Install the Mr. Clean Rom
- Install these 5 files, I installed everything to the Main Memory, I advice you all to do the same!
1) Wizard_AKU2_NLD_mui_Tool.cab
2) NLD_Notifications_WIZ.cab
3) NLD_Today_113.cab
4) DUT_SMS.cab
5) NLD_Registry_Changes.cab
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run through the (Dutch) Welcome Screen for screen alignment etc.
- Go to Settings -> Regional Settings (Instellingen -> Landinstellingen) and set it to Nederlands
- Delete the file \Windows\initobj.dat and rename \Windows\welcome.lnk to something like welcome.bak.lnk
- Delete the folder "\Program Files"
- Delete the folder "\Windows\Fonts"
- Delete the folder "\Windows\Favorites"
- Delete the folder "\Windows\Programs"
- Delete the folder "\Windows\Start Menu"
- Delete the folder "\Windows\Start Up"
- Delete the folder "\Windows\PDFfonts" (optional, but I did it to get 2MB extra free space because I don't use ClearVue PDF!)
- Remove all English folders in \My Documents (EXCEPT THE TEMPLATES FOLDER, in this folder the Camera Templates will be stored!)
So you can delete the Camera Templates from \My documents\Sjablonen
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run these 2 files (located in this thread, somewhere below on the 1st page)
1) MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB
2) NLD_MMS_FOLDER.CAB
- Done!
Regards,
Molski
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Not good, i cannot remove or rename welcome.lnk.......
Any suggestions, tried total comander and the windows explorer...
edit: Solved the problem on my own: First with total commander tap'nhold --> properties and disable the read only checkbox.
then goto shortcut tab and edit this to something....
then it is possible te rename..
Yeah not beautiful... but it works so what the heck....
mccune said:
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Click to expand...
Click to collapse
It will work on AKU2.5 after some development from Asukal and some testing from me, offcourse when I got it working, you all will get it working
My litle contribution to this fantastic idea
For the Dutch T9 follow the next steps:
In the attachment are three files:
1 - dictprob.dat
2 - statdict.dat
3 - mssp2_nl.lex
Copy them to the \Windows dir and replace existing files.
Then make the following changes to the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Spell Check]
"Main_Dict"="\Windows\mssp2_nl.lex"
Restart your device and it should work like a charm
[edit]
The following location was not in my registry:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, and my device is decertified. When I change the properties or rename the file it looks like everything goes well. But when I refresh the file is still there.
[/edit]
Great contribution!!
The following location:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
has to be:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\Strings"
I'm almost ready with the CAB file that takes care of these registry changes, including the T9 stuff.
mccune said:
My litle contribution to this fantastic idea
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, en my device is decertified. When I change the properties or rename the file it looks like everything goes fine. But when I refresh the file is still there.
[/edit]
Click to expand...
Click to collapse
Uncheck the read-only for this file and then go to the properties and remove the entry, OR rename the file like I did to something as welcome.bak.lnk
Here it is, the CAB file with the registry changes, with the files for T9 including one extra file (autocorrect.txt) from a dutch Rom, for (I guess) spellchecking.
I installed the file on my device and got no problems, I don't wanna say it is 100% correct, but I really guess it is, so were heading for 5 final files for installing Dutch Language on EVERY Non dutch Rom
By the way...don't forget to delete the old English subfolders of My Documents guys
I love it to be Dutch
Looks great!
I don't mind that the welcome.lnk stays. It only lets you run the welcome screen once, in Dutch. After that it doesn't show up anymore.
I followed the instructions about the ReadOnly settings, but like I said it looks like it changes the name of the file. But after a refresh it's back again
Glad to be of some help concerning the Dutch spelling
I updated my NLD_Registry_Changes.CAB file.
Because the Camera has some problems, although I change the "Frames" string, every time you select a picture template the setting is resetted.
So the solution is to delete every English subfolder of My Documents EXCEPT for Templates (!!), but on the other hand, it's not a bad idea to have al the camera templates in a seperate directory
Where is the update cab file? is it the one posted above?
ny-hardcore said:
Where is the update cab file? is it the one posted above?
Click to expand...
Click to collapse
Yes, but please read the 1st again, I updated the post with final instructions (for now....)
I also tested this language Pack on the new T-Mobile 2.26 Rom and I can confirm it's also working on the new Rom.
My advice for now is, don't use the Mr. Clean Rom anymore, but the new T-Mobile 2.26 Rom and don't install the Extended Rom to keep it as clean as possible (or manually select what you want to install).
Hmmm... ..just came to tell you that I also run the latest T-Mobile ROM in Dutch now. No problems so far! 8)
I really find it very cool that we don't have to wait anymore for Roms in dutch!
We just grab the latest WWE Roms and turn it into Dutch, no problem
The Mr. Clean Rom was cool to test with, but I'm happy with the 2.26 Rom.
are there any other languages?
Nope, not explictit for the Wizard, only for Universal.
These packages that I am using now were custom created by Asukal especially for the Wizard!
is it possible to do the same thing for french ?
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
mccune said:
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
Click to expand...
Click to collapse
Yep....you're right on that
Hi, I have bought from Ebay a HP 6510 whti english Language.
I'm Italian, and I wanto to install a Italian Rom.
I have downloaded it, but I cannot install it, becouse language is different and setup doesn't go on.
There is a solution??
Daniele
danielehk said:
Hi, I have bought from Ebay a HP 6510 whti english Language.
I'm Italian, and I wanto to install a Italian Rom.
I have downloaded it, but I cannot install it, becouse language is different and setup doesn't go on.
There is a solution??
Daniele
Click to expand...
Click to collapse
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Hello Asukal,
Wow .. I see you everywhere for changing language ..
I found you on google and saw your web site .. and reading so much of your posts ..
You are the expert here with IME.
I am having a problem for my Benq P51 that using WM6 JPN. I can't understand it because it is in Japanese. I try to work on it by changing it back to English or Thai but no hope.
Can I use your korechithai ?? or Do I have to do something as the above post ??
Please guide me !!
PS... I just installed your korechithai and it works !! i can read Thai now but .. everywhere is still in japanese .. such as, contact button, name of some programs, .. etc
ipaq 6515
i tried to cahnge language from spanish to english , update stopped at 0.1%, i disconnected after few hours and after that my ipaq is dead , i cant do nothing, its not recocnized by active sync, i tried hard reset but it dosen't show nothing, exept light shows that is charging , screen is empty all the time , if anybody had same problem please help me
chilly_ft said:
i tried to cahnge language from spanish to english , update stopped at 0.1%, i disconnected after few hours and after that my ipaq is dead , i cant do nothing, its not recocnized by active sync, i tried hard reset but it dosen't show nothing, exept light shows that is charging , screen is empty all the time , if anybody had same problem please help me
Click to expand...
Click to collapse
The bootloader was dead, there is almost nothing you can do (unless you know how to JTAG the 6515... or take out the ROM, reprogram and solder it back)...
watchsat might not be right i have read other posts that this error at 0.1% is due to radio rom not being compatable and freezing there. no idea what the solutoion to this is but i know that if you dump radio.nbf it will continue pat 0.1% but you will have no radio
dont read much chinese but go over to www.pxdxa.com and search for error there as well.
try with another pc
that work
i try that and it's working. first I try english to italian the resultat its ok
I come back in english end now I heve change in french
thanks
Asukal said:
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Click to expand...
Click to collapse
where i can find ROM for english language only for 6515-without letters ?
how do you open hpruu.in for editing???
Asukal said:
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Click to expand...
Click to collapse
hello everyone
Í have the HP ipaq 6515 yesterday i've updated it to the newest vesion 1.21 but i'm asking if someone has or can fabricate a dutch rom if possible
greets
hnaoume said:
how do you open hpruu.in for editing???
Click to expand...
Click to collapse
open it with Notepad or other txt editors.
ini was just text file.
chilly_ft said:
i tried to cahnge language from spanish to english , update stopped at 0.1%, i disconnected after few hours and after that my ipaq is dead , i cant do nothing, its not recocnized by active sync, i tried hard reset but it dosen't show nothing, exept light shows that is charging , screen is empty all the time , if anybody had same problem please help me
Click to expand...
Click to collapse
i also got same problem with you a long time ago.
then i had brought it to Hp service center.
i said to them " suddenly it never boot any more,,"
they replaced it with new one after few days.
(in my case, it was free of charge,but i dont think you also free)
pls try this, if you have little bit of luck, you can get new one
neogin said:
Hello Asukal,
Wow .. I see you everywhere for changing language ..
I found you on google and saw your web site .. and reading so much of your posts ..
You are the expert here with IME.
I am having a problem for my Benq P51 that using WM6 JPN. I can't understand it because it is in Japanese. I try to work on it by changing it back to English or Thai but no hope.
Can I use your korechithai ?? or Do I have to do something as the above post ??
Please guide me !!
PS... I just installed your korechithai and it works !! i can read Thai now but .. everywhere is still in japanese .. such as, contact button, name of some programs, .. etc
Click to expand...
Click to collapse
you can tweak registry in those valu with registry editor,
could it be posible to flash only OS and EXTROM to avoid radio bricking?
Asukal said:
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Click to expand...
Click to collapse
and how to proced English to Spanish can you upload de rom hackng because i dont a expert computer
thanks a lot it worked perfectly for my HW6515 i used this tutorial to change the language from spanish to french. Cool
How can I update through memory card ?
My phone is showing SERIAL v0.21 .
Thanx !
me too
salaam
1)i have a hw6515c my language is arabic and i want to change it to english but i can't find arabic rom please help me???
2)can i download wm2003 us or uk and install it on my hw6515c???
if your answer is yes please guide me ...
thanks ...
thanks for the perfect guide!
I changed the language of my 6515 from WWE in to Italian
now I've only question, I can flash the full Italian rom after this operation?
Help
Ok thanks to this helpful site I have flashed my ROM with Dutty's v3 beta and I must say its fantastic. But...
...I need to add Remote Desktop and I have downloaded it from Dutty's cabs but I haven't a clue on how to install it!
Can any one help?
Thanks.
How to run a cab (?)
Well, if it is that what you are asking, just copy the .cab file into a folder at your card or phone and execute it. Cab is the equivalent to .exe files on PC's.
NOTE: During the installation, you have to specify where to install, device or card. For this specific application, (remote desktop) you should install it at your device as some issues have been reported when installed on an extension card.
Seems so daft now - thanks for that - got confused as WinRaR just opened it and showed the contents on the PC.
Anyways, working now. Thanks again.
Hello
i have spent the last 4 days trying every combination to get slideview working on my x1. and to no avail
I tried countless different files and different ways to download then in order and different tutorials.
I cant do it.
PLease can some1 help with a cab file or better instructions
p.s i am using 826x series rom with sense
I have no problems loading the panel manager and having it mapped to x button and with every single panel working along with the new android NEOFROYO
I am not new to this rom flashing and such but I just can't get this working no matter what i have tried.
please help me!
seriously no1 knows how
try following the steps and you will come to the same roadblocks as me
please help
i am trying to port the 2 registry files 1.Discretix DRM.reg and 2.xperia drm.reg
i am using sktool registry editor to import
when I try to import 1.Discretix DRM.reg my x1 reboots
when i import 2.xperia drm.reg the screen pops up a little box and says ported 1
is my x1 suppose to reboot itself on the first reg file?
AM I SUPPOSE TO COPY ALL 88 CAB FILES TO MY x1???????????
I AM ONLY COPYING THE DEPENDENCIES CAB FILES....... is that the problem?
WHAT DOES DEPENDENCIES MEAN???????
COULD IT BE THE ROM I AM USING?
I HAVE GOTTEN X2 PANEL MANAGER WORKING WITH ALL PANELS ON MY X1
JUST NOT SLIDEVIEW
I AM USING DIFFERENT PANEL MANAGER I FOUND ELSEWHERE AND IT WORKS FLAWLESSLY
So slideview still does not show up on my x1 with me doing the following
Heres a list of what i am doing
1st way:
ive downloaded and tried both the sixth release and fourth release files and the original release files as some of the files are missing in the 4th and 6th release.
I've tried this way of installing with both the original release and the files from the 6th release DID NOT WORK EITHER WAY!
Dependencies:
12_SEUS DRMWhiteList
15_Extra Fonts
2_Awox mediaCTRL
28_OEMNotif
42_SlideView Plugins
47_SlideView (of course )
64_Sony Ericsson XpFramework
65_PlayNow (sometimes it can't install, skip it)
70_EmzFilters
88_SlideViewDisableErrorMessage
DRMClient (!). Download, copy .zip contents to \Windows\ manually (using Resco Explorer, ...), apply *.regs.
Thanks to NighPlayer32
DRMClient is MUST-HAVE!
Then I have tried again both the original release and then tried the 6th release files to this tutorial in succession
DID NOT WORK EITHER WAY!
2nd way:
install panel manager R3AA :
1. install sdkcert
2. install panel manager R3AA
3. copy xpengine.dll to folder panelmanager
4. install PMLauncher
5. install Xkeyhandler
6. install X2PM
7. install activeXdeployment
8. install flashpanelAndMMIInstall
9. tilewave panel
install slideview
12_SEUS DRMWhiteList
15_Extra Fonts
2_Awox mediaCTRL
28_OEMNotif
42_SlideView Plugins
47_SlideView (of course )
64_Sony Ericsson XpFramework
65_PlayNow (sometimes it can't install, skip it)
70_EmzFilters
88_SlideViewDisableErrorMessage
then copy DRM client content \Windows\ and apply *.regs.
restart
i found this: http://forum.xda-developers.com/showthread.php?t=607465&page=2
and i think it might help you...(see the last post on this page)
now (if it helped or if you want) please upload a zip with all panels on rapidshare or megaupload, or anywhere as soon as possible...(and -obviously- post a link to them)
(sorry for any mistake)
greetings from Romania....
thanks but if you notice my post i do add that cab file thanks
Here you are: first install slideview next copy all the files with DRM HTC + X2 to windows/ next install fdc task manager and import xperia drm.reg then Discretix DRM.reg at the end restart your phone if it will not work download rom: lix-X2 v1 and extract from it SlideView.cab - older versions for 6.1
P.S. Sorry for my bad English
I GIVE UP!
everything i tried has failed
thanks
p.s i think its because it only works on a winmo 6.1 and not winmo 6.5 or 6.5.x
i am only guessing here
SlideView works without problem on 6.5 and 6.5.x look at XPure ROM
oh
sorry i was wrong then
that is the only place i have been able to use it
I had that rom with tf3d
then i found 826x and like that better i loaded panel manager and all the panels and they are working flawlessly
the only thing that wont work is slideview