Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
I don't want to be rude but if you don't know how to unpack those files - you shouldn't be doing this.
And why do want to put a JJ rom on a wizard?
no offence...are you on crack or somethin?
jasjar ROM into k-jam device?! :?
Related
Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes
Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?
Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!
Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX
Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.
Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
Hi Guys,
I am trying to flash my rom from Asia to Qtek. I have read that i need to convert the exe to usable form. I have been reading the wiki but, just cant seem to be able to do so.
just extract the exe file with a zip program
ermm.. extract from any zip program ?? i dont get u dude.. I have got the
.exe file btw, when i run the baupgrade.exe, it says device data error. i have edited my editfix.bat. When i run the .exe file direct, it says country id error.
i also used the new type I tools still, no luck
Whats meant by "convert the exe to usable form", is the exe file you download, well the upgrade exe file
I-Mate_PDA2k_French_14002_167_11200.exe this you can extract with zip.
If you download a TypeII rom, you should be able to use the MaUpgradeUt_noID file descriped here
If you download a TypeI rom, then use the xda3nbftool.exe to modify the rom to match your devicedata.exe.
Note that you must have the correct Rom password to get correct out come using xda3nbftool.exe.
Search Forum for password for the desired Rom
I have downloaded a T-Mobile Dutch Shipped Rom. It is a .bin file.
How can I upgrade my Qtek 9100 with this .bin file?
I tried some copy and paste work, but nothing works!
Who can help me?
where did you find it? I am desperately searching for this file.
I have it but it is not that like the other ROMS on the ftp, which upgrade automatically your MDA.
Here it is!
I just checked the file and it seems that its NOT a .bin file as cd image file.
Tried to burn it without luck and MagicISO gives an error its not a CD image file.
It's not a .Bin/.Cue file, it's a simple dump of the rom and has to be installed on your Wizard and not be burned on a cd.
Greetings,
How could i extract nk.nbf from the underground WM6 rom.
Because it is needed for all Cid locked G4 and it will be helpful to everybody.
Can anybody tell me how to? I tried searching it but i didnt find any good answer.
Thanks
I think you can just right click and extract it.
You wont see it unless you are able to view hidden files.
You may have to change it from hidden to read only in order to use the file.
Hope im not spoiling anybody's secret.
Hope this helps you.
if you've downloaded a self-extracting exe you can in most cases just rename it to rar and then open the file. Otherwise just get the nk.nbf from the temp directory that the exe is extracted to...
208 error
do i need a seperate application to get NBD 8.3 to extract to phone keep getting 208 file in use error I am noob but succsefully sim and cid unlocked 8125 and have had severall different ROMs on phone. Flashed back to button love ipl/spl and then flashed TMO 2.26 rom and really want to try NBD's latest and hot new ROM any help greatly appreciated. the info on here made me think I had a grip on flashing until I hit this hurdle
This site and the chef's awsome
If you have been successfully uploading several ROMs before the NBD8.3 with the RUU works in the same way.
Included in the rar file there is also a readme explaining pretty much in detail how to run the RUU to install. Moreover you will also find some explaination on the different error codes.
You may want to download the rar file again and have a second try.
File error
Sorry bout that I was not extracting to a folder and then running the RUU that's how I kept getting the error Thanks for your help
it´s simple download the magic program called wizard service tool (WST) by mestrini, you have a icon named nbf actions, press extract nbf open the rom you want, choose the destiny folder and voilá, you have the nbf file extracted, after you haved to cook then! with all you want S.O. radio ipl or spl..
hi guys..
i;m trying to upgrade from wm5 (shekkar) to wm5 (also from shekkar)..
i have follow all the instruction given.. but the error code 103 keep on displaying... how to solve this problem??
is the nbf (the rom file)
located in the same dir
as the exe file ?
Rudegar said:
is the nbf (the rom file)
located in the same dir
as the exe file ?
Click to expand...
Click to collapse
hahaha... my bad
i forgot to extract to the zip file into one folder... i directly run the setup within the zip file.... btw.. tqvm