hi guys..
i;m trying to upgrade from wm5 (shekkar) to wm5 (also from shekkar)..
i have follow all the instruction given.. but the error code 103 keep on displaying... how to solve this problem??
is the nbf (the rom file)
located in the same dir
as the exe file ?
Rudegar said:
is the nbf (the rom file)
located in the same dir
as the exe file ?
Click to expand...
Click to collapse
hahaha... my bad
i forgot to extract to the zip file into one folder... i directly run the setup within the zip file.... btw.. tqvm
Related
Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes
Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?
Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!
Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX
Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.
Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
Hi Guys,
I am trying to flash my rom from Asia to Qtek. I have read that i need to convert the exe to usable form. I have been reading the wiki but, just cant seem to be able to do so.
just extract the exe file with a zip program
ermm.. extract from any zip program ?? i dont get u dude.. I have got the
.exe file btw, when i run the baupgrade.exe, it says device data error. i have edited my editfix.bat. When i run the .exe file direct, it says country id error.
i also used the new type I tools still, no luck
Whats meant by "convert the exe to usable form", is the exe file you download, well the upgrade exe file
I-Mate_PDA2k_French_14002_167_11200.exe this you can extract with zip.
If you download a TypeII rom, you should be able to use the MaUpgradeUt_noID file descriped here
If you download a TypeI rom, then use the xda3nbftool.exe to modify the rom to match your devicedata.exe.
Note that you must have the correct Rom password to get correct out come using xda3nbftool.exe.
Search Forum for password for the desired Rom
Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
I don't want to be rude but if you don't know how to unpack those files - you shouldn't be doing this.
And why do want to put a JJ rom on a wizard?
no offence...are you on crack or somethin?
jasjar ROM into k-jam device?! :?
installed Tuma 1.4 & 1.3. I have problem with Chinese system. Now, I want to downgrade to Wm2003. But, I deleted Extrom when upgrade from 1.3 to 1.4. How do I downgrade it???
HELP!!!
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
the link can't go
It had a typo in it. Fixed:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Thanks!! I done!!
In the instructions, it says I should extract files from the rom I've downloaded... however when I double click on the .exe files (I've taken the third rom on this list from http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades) it simply starts the upgrade process, and I cannot extract any nk.nbf etc.
What am I doing wrong? How do I extract the rom files so I can use MaUpgradeUt_noID.exe?
Any help appreciated!
CUT AND PASTE from
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Extract the files (Unrar / Unzip) from the downloaded *.exe
Click to expand...
Click to collapse
So that means that with rar or zip you right click on the .exe and use the extract option.
hey
I am using windows xp on my desktop so when i try to extract the nk.nbf files using dumprom a window opens like that of cmd prompt and closes immediately. can anyone tell me of a software that works on xp since i dont know linux,unix and other stuff expect windows.
I searched the forums but I could't find such programs.
can anybody help me plz since I am trying to cook rom on my own using the procedure given by faria .
I found that the batch files that are included in the ROM cooking tools don't work, but typing the commands that are in the batch files work fine. Try that, it worked for me.
Not got around to cooking my own ROM yet though
HTH
Andy
try looking here
THANKS it worked
Still need help
Ok I must be missing something.
I probably found it but just did not know it.
most things need a nk.nbf file to start with.
Where do I get one ?
Does it make a differance what it is ?
stainlesspc said:
Ok I must be missing something.
I probably found it but just did not know it.
most things need a nk.nbf file to start with.
Where do I get one ?
Does it make a differance what it is ?
Click to expand...
Click to collapse
It makes ALL the difference
The RUU files are compressed pakages with the various files used in the update process one of which is the nk.nbf (always with that name)
So no matter if the OS is WM5, WM6, cooked or official, a radio only, a splash image only, it is ALWAYS named nk.nbf since it will be looked by that name by the updater application.
hope it was clear enough
cheers
_Nomad_ said:
try looking here
Click to expand...
Click to collapse
I looked at this, but it extracts .nba files. I need to extract files out of .nbf
So i can start cooking my own ROMs
freeyayo50 said:
I looked at this, but it extracts .nba files. I need to extract files out of .nbf
So i can start cooking my own ROMs
Click to expand...
Click to collapse
use typho5.
peter petrelli said:
use typho5.
Click to expand...
Click to collapse
OK, so i just downloaded typho5 through the ftp, but i dont have the dll file for it. I get error: LoadLibrary p2x587.dll failed
Where can i find the file?
just get it from shelltool.
I found another typho5 and it works. After dumping the files with typho5 which one is the extended rom so i can extract the cab files??
freeyayo50 said:
I found another typho5 and it works. After dumping the files with typho5 which one is the extended rom so i can extract the cab files??
Click to expand...
Click to collapse
Use my tool (Wizard Service Tool) as it extracts all the files in a nk.nbf without command lines and without any hassle
cheers
Thanx. Worked great. Why doesn't WinImage want to open the .nb files??
Im tryin to extract cab files from faria's Crossbow Reloaded v1.5. After using Wizard Service Tool, I get the 3 .nb files.
freeyayo50 said:
Thanx. Worked great. Why doesn't WinImage want to open the .nb files??
Im tryin to extract cab files from faria's Crossbow Reloaded v1.5. After using Wizard Service Tool, I get the 3 .nb files.
Click to expand...
Click to collapse
Winimage only handles the extension_rom.nb since it is an image of a HDD formatted with FAT16; the other files are encrypted/packed and can only be handled with kitchen tools spread all throughout the forum
cheers
Ok thanx. I'm going to start my search