Database Develop

Qtek 9090 would not update and is dead now

Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes

Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?

Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!

Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?

Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.

berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:

When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.

berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX

Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.

Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/

extracting nk.nbf

hey
I am using windows xp on my desktop so when i try to extract the nk.nbf files using dumprom a window opens like that of cmd prompt and closes immediately. can anyone tell me of a software that works on xp since i dont know linux,unix and other stuff expect windows.
I searched the forums but I could't find such programs.
can anybody help me plz since I am trying to cook rom on my own using the procedure given by faria .

I found that the batch files that are included in the ROM cooking tools don't work, but typing the commands that are in the batch files work fine. Try that, it worked for me.
Not got around to cooking my own ROM yet though
HTH
Andy

try looking here

THANKS it worked

Still need help
Ok I must be missing something.
I probably found it but just did not know it.
most things need a nk.nbf file to start with.
Where do I get one ?
Does it make a differance what it is ?

stainlesspc said:
Ok I must be missing something.
I probably found it but just did not know it.
most things need a nk.nbf file to start with.
Where do I get one ?
Does it make a differance what it is ?
Click to expand...
Click to collapse
It makes ALL the difference
The RUU files are compressed pakages with the various files used in the update process one of which is the nk.nbf (always with that name)
So no matter if the OS is WM5, WM6, cooked or official, a radio only, a splash image only, it is ALWAYS named nk.nbf since it will be looked by that name by the updater application.
hope it was clear enough
cheers

_Nomad_ said:
try looking here
Click to expand...
Click to collapse
I looked at this, but it extracts .nba files. I need to extract files out of .nbf
So i can start cooking my own ROMs

freeyayo50 said:
I looked at this, but it extracts .nba files. I need to extract files out of .nbf
So i can start cooking my own ROMs
Click to expand...
Click to collapse
use typho5.

peter petrelli said:
use typho5.
Click to expand...
Click to collapse
OK, so i just downloaded typho5 through the ftp, but i dont have the dll file for it. I get error: LoadLibrary p2x587.dll failed
Where can i find the file?

just get it from shelltool.

I found another typho5 and it works. After dumping the files with typho5 which one is the extended rom so i can extract the cab files??

freeyayo50 said:
I found another typho5 and it works. After dumping the files with typho5 which one is the extended rom so i can extract the cab files??
Click to expand...
Click to collapse
Use my tool (Wizard Service Tool) as it extracts all the files in a nk.nbf without command lines and without any hassle
cheers

Thanx. Worked great. Why doesn't WinImage want to open the .nb files??
Im tryin to extract cab files from faria's Crossbow Reloaded v1.5. After using Wizard Service Tool, I get the 3 .nb files.

freeyayo50 said:
Thanx. Worked great. Why doesn't WinImage want to open the .nb files??
Im tryin to extract cab files from faria's Crossbow Reloaded v1.5. After using Wizard Service Tool, I get the 3 .nb files.
Click to expand...
Click to collapse
Winimage only handles the extension_rom.nb since it is an image of a HDD formatted with FAT16; the other files are encrypted/packed and can only be handled with kitchen tools spread all throughout the forum
cheers

Ok thanx. I'm going to start my search

Enquiry on downgrading to WM2003SE

http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
I saw the step to step downgrading from the above link
I have downloaded the downgrade pack (on step 1)
I have also downloaded the available the original shipped ROM versions (step 2) and have some problems on "Extract the files (Unrar / Unzip) from the downloaded *.exe". I don't how to extract the *.exe because as I execute the *.exe, it just try to run and search for devices. Does anyone know how to just extract the content?

open the exe with winrar it is self extracting archive

downgrade success but....
I have successfully downgraded to WM2003SE. But there is one problem occur... When I tried to activesync with the new WM2003SE, my PC couldn't recognize my PPC by saying I must upgraded the activesync to suit the PPC. I have tried the activesync 3.7 , 4.2 and 4.5 and same thing happened. Is it the problem of extRom.
Could someone explain to me what is extRom work and mean for PPC

help needed: error 103: rom not found

hi guys..
i;m trying to upgrade from wm5 (shekkar) to wm5 (also from shekkar)..
i have follow all the instruction given.. but the error code 103 keep on displaying... how to solve this problem??

is the nbf (the rom file)
located in the same dir
as the exe file ?

Rudegar said:
is the nbf (the rom file)
located in the same dir
as the exe file ?
Click to expand...
Click to collapse
hahaha... my bad
i forgot to extract to the zip file into one folder... i directly run the setup within the zip file.... btw.. tqvm

[How To] Step by step guide to Backup your Shift to nbh (All Steps!)

Please rate this thread if it was useful...
I know that stuff like this has been posted before but I have never seen a full guide begining to end on how to backup your rom so here is the complete guide (with links) beginning to end of how to backup your WM6X ROM on HTC's Shift to an NBH
To do this you will need a HTC Shift (dir), and basic knowledge of Windows Mobile, Vista, the command prompt and Syncing a WM device with a computer.
NOTE: I am NOT sure if you need HardSPL on the device to flash the ROM back onto your Shift (if someone could let me know that would be great), my guess is that you do as the created nbh will not be signed with HTC's Cert - HardSPL can be found here http://forum.xda-developers.com/showthread.php?t=406606 and is compatible with GSM Shifts only (x9500)
If anyone has any suggestions as to how this post could be improved or tell me if something needs a more in-depth explanation, let me know - Thanks.
First you will need to Liberate your shift; instructions on how to do this can be found here: http://www.modaco.com/content/windows-mobile-news/266537/liberate-your-htc-shift/ (this step will "unlock" the restrictions on windows mobile - this is not necessary but makes installing RAPI tools and other files easier later.
Download HardSPL (we are not going to install HardSPL in this post, but the download includes RAPI that is needed prior to the next step) from here: http://forum.xda-developers.com/showthread.php?t=406606
When the download has finished extract the contents and copy EnableRapi.cab to your device (To do this select Settings from the today screen > USB Tool > Options > Detach from Vista > Options Attach to Vista - yes detach is not always required but seems to solve some issues with syncing).
Your device will now appear in "My Computer"; copy the file somewhere to your device then switch to Windows mobile and run the file.
Download the latest version of itsutils from: http://www.xs4all.nl/~itsme/projects/xda/tools.html (Look under download section) then follow the instructions on http://forum.xda-developers.com/showthread.php?t=382609
After you have followed the instructions there you will have created RAW files of your Windows Mobile ROM (on the post you will notice the the code window in color - these may be different depending on your device and may need to be changed)
Now we need to convert the raw file to an nbh to do this you will need to download the shift kitchen from: http://forum.xda-developers.com/showthread.php?t=422914 then extract the files from the rar archive (using winrar, winace etc)
On some computers the below operation may fail saying "Error loading dll msvcr71.dll" so you should download and extract the attached zip file (msvcr71.zip) to the Tools directory
When you have done that put the *.raw files created by itsutils into the BaseROM directory and run the !BEGIN.cmd file
Select option 2 when asked to rebuild a ROM and follow instructions.
When the command has completed run the !COOK.cmd file; When a window appears titled BuildOS Click on the Play button and wait for the process to complete then close the BuildOS window
Follow further instructions; until another window appears, Select Shift as the "Target Device" and under "OS" select os-new.nb, then click "Build NBH!",
A window will appear asking you to save the NBH - DO NOT CHANGE THE PATH as it kept crashing when I tried to save elsewhere and call the file RUU_Signed.nbh
Copy the file RUU_Signed.nbh where you want and download and extract CustomRUU.zip (attached) to the same path
To restore the ROM all you need to do is Sync with Vista and run CustomRUU.exe
Feedback is always welcome,
Thanks,
Kris

*RESERVED*

All done! But when performing this process
BuildOS Click on the Play button and wait for the process to complete
I have Error window:
Error: File `ROM\XIP\boot.rgu` not found.
and when I click `OK` - process stops!?
What is wrong?

All done without errors!
Previous Error was under XP on D:\ with many subdirs to `shiftkitchen`.
Now all OK is under Vista with `shiftkitchen` in root of C:\
Thanks!
Little question. I am backuping original Russian ROM... an in the ending window (when I choose "Shift" and "os-new.nb") there is Language:WWE. Is there have to be something else?...

sardonix said:
All done without errors!
Previous Error was under XP on D:\ with many subdirs to `shiftkitchen`.
Now all OK is under Vista with `shiftkitchen` in root of C:\
Thanks!
Little question. I am backuping original Russian ROM... an in the ending window (when I choose "Shift" and "os-new.nb") there is Language:WWE. Is there have to be something else?...
Click to expand...
Click to collapse
When you flash your ROM it will be the Russian ROM ... the WWE setting there and the version are just what is displayed in the ROM flashing tool (CustomRUU.exe)
I had the Spanish version and used this process beginning to end - and it says WWE in the flasher but still installs the Spanish version
Kris

Kris, thanks! Believe that I`ll not have reason to use it. But with this reserved ROM it is composed to make any ROM manipulatios.
Thanks once more!

can i request this to be a stickey?
thanks

Great work i00
I have added it to the WIKI and the FAQ thread.

I confirm that you DO need to install HardSPL on the device PRIOR to flashing the ROM back onto your SHIFT.

it's work

someone got shipped UK rom backup ?

kgx said:
someone got shipped UK rom backup ?
Click to expand...
Click to collapse
Radio is here .. will upload the ROM shortley
http://rapidshare.com/files/232295760/Shift_Origional_UK_Radio.zip
Regards,
Kris

kgx said:
someone got shipped UK rom backup ?
Click to expand...
Click to collapse
Orig UK ROM can be downloaded here:
http://rapidshare.com/files/232298625/Shift_Origional_UK_ROM.zip
Regards,
Kris

Sorry when I try following your tutorial,
I have not os-new.nb file what could I do wrong?

Back-up the rom and radio files
Hi i00, absolutely great guide, thank you for the hard and tidy work!
Since I'm a beginner in this area, before doing the dump job myself, kindly ask you to advise if the dump operation leaves the Shift unchanged on the winmo side and I can use it further, i.e. it is a read-only operation OR do I need to load back (flash back) the resulting back-up files (ROM and radio)?
Thank you!

rom
Hi all
i just bought a brand new shift and want to have a back up of the ROM
I've exacted 4 parts of the rom, but unable to convert it back into a NBH
i cant seem to figure out if i need the RUU_Signed.nbh , and where do i get it from, i thought i was making RUU_Signed.nbh from the 4 raw part files.
if anyone can re upload the complete UK ROM.NHB i would be grateful
i have uploaded the 4 part files and the boot loader
www(dot)filedropper(dot)com/rawfiles
part00.raw
part01.raw
part02.raw
part03.raw
SPL.nb
also do i need hardSPL to even load the original back up rom?
thanks
is this the file i need to include in my baserom folder?
forum(.)xda-developers.com/showthread(.)php?t=1875806
Need Radio ROM GPS+Phone Modded 1.27
here is my error code:
Welcome to Kaiser ROM Kitchen
-----------------------------
Please choose the way for Kaiser ROM Kitchen to work:
Enter 1 if you want just to cook ROM
(RUU_signed.nbh required in BaseROM folder)
Enter 2 if you want to rebuild and cook dumped ROM into flashable ROM
(RUU_signed.nbh, dumped part01.raw and part02.raw required in BaseROM folder)
Please choose 1 or 2: 2
Could Not Find C:\kaiserkitchen\baserom\os.nb
Could Not Find C:\kaiserkitchen\baserom\0*.*
Path not found - C:\kaiserkitchen\temp
The system cannot find the file specified.
The system cannot find the file specified.
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Error: Could not open 'RUU_signed.nbh'
The system cannot find the file specified.
The system cannot find the file specified.
1 file(s) copied.
1 file(s) copied.
Press any key to continue . . .