Enquiry on downgrading to WM2003SE - MDA III, XDA III, PDA2k, 9090 Software Upgrading

http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
I saw the step to step downgrading from the above link
I have downloaded the downgrade pack (on step 1)
I have also downloaded the available the original shipped ROM versions (step 2) and have some problems on "Extract the files (Unrar / Unzip) from the downloaded *.exe". I don't how to extract the *.exe because as I execute the *.exe, it just try to run and search for devices. Does anyone know how to just extract the content?

open the exe with winrar it is self extracting archive

downgrade success but....
I have successfully downgraded to WM2003SE. But there is one problem occur... When I tried to activesync with the new WM2003SE, my PC couldn't recognize my PPC by saying I must upgraded the activesync to suit the PPC. I have tried the activesync 3.7 , 4.2 and 4.5 and same thing happened. Is it the problem of extRom.
Could someone explain to me what is extRom work and mean for PPC

Related

Qtek 9090 would not update and is dead now

Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes
Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?
Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!
Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX
Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.
Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/

9090 dead after flashing.....

My Qtek 9090 Dead after or in time flashing
I try .....
1. Flash with NO_ID
2.TRy via romupdate and nb1-file
3. Try via I-mate and T-mobile roms includes NO_iD
and nothing... only dark screen and USB or Serial string......
HELp plz.
...... and IF I insert in it SD card string serial no change after put him in cradle.....
What you can try.
if you have the seral message on your screen then just replace it in cradel and rerun the no_id application.
Are you SURE that you are using a valid ship.exe file and that you have extracted all the files and are following the upgrade instructions for 1.42 as per wilki.
MDAIIIUser said:
What you can try.
all THAT MAY BE
if you have the seral message on your screen then just replace it in cradel and rerun the no_id application.
Yes try, i start no_ID (with many roms) and 9090 waiting 20-30 minutes after this connection error
Are you SURE that you are using a valid ship.exe file and that you have extracted all the files and are following the upgrade instructions for 1.42 as per wilki.
Yes I extract all files , I try many ROMs for I-mate , Qtek , T-mobile in various version ..... I try make SD-Card with dump of rom,......
Only one that i cannot see How Update 9090 from SD to ROM or how copy dump of the ROM from harddrive via MTTY to 9090
This`is Unreal I work with PDA 3,5 years ago but look this bugs first ........
Click to expand...
Click to collapse
We have had a few (very few) that were not able to do an upgrade form thier pc. Not sure if this is a USB issue or software but after all the suggestions that we gave these people and none of them worked all they had to do was move over to a different pc and it worked.
So we know that the wiki 1.42 upgrade page works, that the file works and that the instructions are correct. Best for you is to try a different pc.

O2 IIS - how to downgrade to wm2003

installed Tuma 1.4 & 1.3. I have problem with Chinese system. Now, I want to downgrade to Wm2003. But, I deleted Extrom when upgrade from 1.3 to 1.4. How do I downgrade it???
HELP!!!
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
the link can't go
It had a typo in it. Fixed:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Thanks!! I done!!
In the instructions, it says I should extract files from the rom I've downloaded... however when I double click on the .exe files (I've taken the third rom on this list from http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades) it simply starts the upgrade process, and I cannot extract any nk.nbf etc.
What am I doing wrong? How do I extract the rom files so I can use MaUpgradeUt_noID.exe?
Any help appreciated!
CUT AND PASTE from
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Extract the files (Unrar / Unzip) from the downloaded *.exe
Click to expand...
Click to collapse
So that means that with rar or zip you right click on the .exe and use the extract option.

What I did to get WM61 and the new radio installed with no sd card.....

After searching for hours on all the files, procedures, etc. on the subject, here's a quick guide for the n00b's out there that want to do this... Some information i will be repeating from other places on the internet.
----------------------------------
The following Files are needed (search the forums and google to locate)
1. CheetahUnlocker.rar (http://forum.xda-developers.com/showthread.php?t=334100)
2. Treo750_OS5_2_19199WWE_STD.rar
3. Treo750Radio1.54.07.00.rar
4. RUUWrapper.zip
OK.. Now here we go
unrar the first file 'cheetahunlocker' and basically follow the instructions from the above #1 link. Two things to note: Ignore any images for Hermes and you must have .net 2.0 framework installed on the device.
when you run the unlocker, the first one worked fine for me, the second process didn't work, but that doesn't matter. also watch the screen for the unit to ask you about opening files. if you don't do it, it can time out and then you'll have to start over.
Now here is the fun part.
1. Unzip the RUUwrapper file to it's own folder.
2. unrar the CHEEIMG.nbh file from Treo750_OS5_2_19199WWE_STD.rar into the same directory of the RUUwrapper files
3. rename the CHEEIMG.nbh file to CHEEIMG_FW.nbh
4. run the RUUWrapper.exe file and it will flash the rom of the unit to WM61. **remember to watch the screen for prompting of opening files at the beginning.
5. Done with WM61. Now for the radio update. It's basically the same process as above.
6. unrar the CHEEIMG.nbh file from Treo750Radio1.54.07.00.rar and put it into the RUUwrapper directory like before.
7. rename the CHEEIMG.nbh file to CHEEIMG_FW.nbh (delete the old one first)
8. Run the RUUwapper.exe file again to flash (this time) the radio to the unit. **remember to watch the screen for prompting of opening files at the beginning.
9. All Done.
----------------------
It worked fine for me with the Treo 750 and the AT&T network..
Main places i got information from were:
http://forum.xda-developers.com/showthread.php?t=365873&page=9
http://forum.xda-developers.com/showthread.php?t=334100
Your method above just helped me escape a bootloader loop which was (apparently created) by trying to load a different custom rom after having installed hardSPL. The only precautionary measure I took was to place only one image (the same OS & Radio you used) into the RUUWrapper folder at a time and it loaded right up. Still checking and testing some things out because the bootup isn't exactly smooth as silk, and the old "TREO750-1.13-CNG" still shows up under About->Phone->Software Version, but all firmware references reflect the updates. MTTY was ineffective in my particular situation.
Now for testing the radio for reliability and battery drain,etc...
Thanks for the heads-up!
Witch one is the correct selection (see attachment)
Anybody? at least tell me where I can find information about RUUWrapper.
Well I clicked Force use safe SSPL and clicked through and I got a error message saying that it could not communicate with the 750 Error 246 check usb connection?
I read that Vista had some issues with usb connections and to download and use VistaRUU usb drivers, I installed it according to the description, still error 246 and sometimes error 202?
Any ideas?
honestly i don't remember seeing that screen you are getting. it looks like the software isn't detecting the rom you have on your phone, in which case i would use the autodetect.
Hello Eric,
If I use autodetect it says it can not detect what version I'm using "Recomend using Safe SSPL"
This was the ONLY process that worked for me. However, I did not use the Cheetah unlocker, it is unfriendly with my Vista USB connection. I used magic unlocker and then your instructions and now I running on WM 6.1..
Thanks.. great work!!
I wonder - do you have Voice Command anymore?
Just curious - I lost Voice Command when I did this upgrade. Sure, the OS runs nice, seems a little faster, but I sure do miss Voice command. I am running AT&T's Treo 750, which had Voice Command on it. Some people, on some websites, like TreoCentral said there was a 'lite' version, which did not have Voice Command, but I installed this version: Treo750_OS5_2_19199WWE_STD.rar, and that seems like the right one.
So, I wonder - do you have Voice Command anymore?
As I know it is the normal version's bug (missing the voice command).
I completed set 1, no success!
When u say add to directory what do you mean?
missing the voice command? Oh my...
egiblock said:
After searching for hours on all the files, procedures, etc. on the subject, here's a quick guide for the n00b's out there that want to do this... Some information i will be repeating from other places on the internet.
----------------------------------
The following Files are needed (search the forums and google to locate)
1. CheetahUnlocker.rar (http://forum.xda-developers.com/showthread.php?t=334100)
2. Treo750_OS5_2_19199WWE_STD.rar
3. Treo750Radio1.54.07.00.rar
4. RUUWrapper.zip
OK.. Now here we go
unrar the first file 'cheetahunlocker' and basically follow the instructions from the above #1 link. Two things to note: Ignore any images for Hermes and you must have .net 2.0 framework installed on the device.
when you run the unlocker, the first one worked fine for me, the second process didn't work, but that doesn't matter. also watch the screen for the unit to ask you about opening files. if you don't do it, it can time out and then you'll have to start over.
Now here is the fun part.
1. Unzip the RUUwrapper file to it's own folder.
2. unrar the CHEEIMG.nbh file from Treo750_OS5_2_19199WWE_STD.rar into the same directory of the RUUwrapper files
3. rename the CHEEIMG.nbh file to CHEEIMG_FW.nbh
4. run the RUUWrapper.exe file and it will flash the rom of the unit to WM61. **remember to watch the screen for prompting of opening files at the beginning.
5. Done with WM61. Now for the radio update. It's basically the same process as above.
6. unrar the CHEEIMG.nbh file from Treo750Radio1.54.07.00.rar and put it into the RUUwrapper directory like before.
7. rename the CHEEIMG.nbh file to CHEEIMG_FW.nbh (delete the old one first)
8. Run the RUUwapper.exe file again to flash (this time) the radio to the unit. **remember to watch the screen for prompting of opening files at the beginning.
9. All Done.
----------------------
It worked fine for me with the Treo 750 and the AT&T network..
Main places i got information from were:
http://forum.xda-developers.com/showthread.php?t=365873&page=9
http://forum.xda-developers.com/showthread.php?t=334100
Click to expand...
Click to collapse
This is great and it worked for me so I'm including the files here.
WM 6.1 does have some things that need to be debuged.
I havent tried WM 6.0 but from what I read on here it seems that 6.0 is more stable.
Does any one know if this route will work for WM 6.0?
If so does any one know which file do you download?
Will this set up work with WM 6.0?
http://omnifusionhosting.net/treo750/
http://forum.ppcwarez.org/viewtopic.php?f=221&t=41062
Well, WM6.0 is more stable, for one thing I had a faster battery drain with WM6.1 than I did with 6.0.
As mentioned earlier, some missing stuff like voice command, but one thing I thought wouldn't be there was messaging. For some reason that Messaging is half annoying me.
While I'm at it, anyone know how to backup SMS messages? That Messaging app is just keeping them to itself.

Tilt Rom Question

I hope I not out of line here but I am about to go crazy. I have read the posts and I am completely lost at this point. I goal was to go from WM 6.1 to WM 6.5.
As per the Noob FAQ I flashed 3.29 on to my phone exactly as the directions stated no problem. After step 3 I did step 4 no problem. At this step is where I am stuck. I have tried to flash the rom vis activesync with no luck.
I run the RUU.exe and it runs fine ask me to update the flash from version 3.29 to 1.00. the files I downloaded the TPC_V11_KAISER_MANIILA.rar and the TPC_V11_KAISER_LOADED.rar and placed them in the same folder as the RUU.exe but not both at the same time.
I have done this step at least 4 times and nothing it is still at WM6.1. I am sure that i am doing some stupid newguy mistake or I am missing something but I am lost. If this is out of line I am sorry to the mods, I am just going crazy.
you are correct to place whatever image needs to be flashed in the same folder as the RUU before running the RUU. you are also correct about avoiding more than one ROM image being present next to the RUU before running the RUU.
the RAR files that you downloaded need to be extracted first (download, install, and use winrar for this purpose). once extracted, the ROM image contained in the RAR file is what should be placed in the same folder as the RUU.
...or you still have something other than the image of the desired ROM in the same folder as the RUU. perhaps the image for the HardSPL is still lurking around in that folder?
Yup you need to extract the rar files using winrar (latest version). It's a .nbh file that you need for the flash, in the same directory as the RUU.exe file.
Thanks guys what a stupid mistake on my end. I flashed the rom and it is working great. I really like this upgrade from my original WM6.1. The only thing I am missing is Office mobile. Thanks for the help
Here is PDACorner Office 2007

Categories

Resources