day-ligh-saving-time setting - PDA2, XDA IIi, 2020i General

Does anyone know where the day-light-saving-time setting is?

Hmmmm :?
Good question! I just had a look for you, and I couldn't find anything obvious!
I'm assuming, as I don't recall having to set my clock when we came off BST onto GMT in the autumn, that WM2003 does it for you!
In fact, thinking about the way the desktop OSs have gone, in 95/98, it used to warn you it had changed the clock and to check it was correct. In XP, you no longer get this warning, so I'm also assuming the M$ have got so much confidence in WM2003 getting it correct, they've gone a step further and removed the option to turn it off all together and it just goes ahead and does it!
Just a thought - anyone know any different, coz it's got me thinking now!

Related

Upgrade then backup question..C'MON PEOPLE I NEED YOUR HELP!

Hello all,
I am a total novice at this stuff but request a little help. If you have 2 minutes spare please humour me and help out :wink:
I decided to upgrade my ROm etc for the first time and went to the o2 XDA site to do it.
It seemed to go fine. Then I restored my full backup from the xbackup thing, from my SD card. Is this correct? Or have I just undone my ROM upgrade? All my programs are back on but it looks the same.
If I cant restore after an upgrade, how do i get all my photos and other things back on? I can reinstall programs no prob, and contacts and calender will sync from my PC, but what about everything else?
Sorry if this question has already been asked but I tried the search facility and got nowhere.
Thanks in advance
HPJ
PS you never know, one day I might add something to this forum rather than just asking dumbass questions...
Well I got bored waiting so I bit the bullet and did the upgrade with no restore afterwards.
Seems all fine. Gotta reinstall everything I think so i'm slowly working my way through that. I'll keep posting....if anyones reading?! :!: :?:
HPJ
Glad you solved your problem. The reason that you never got an answer is that the topic of should I restore a backup after a new rom flash has been covered so many times before.
I will add a line in wiki BlueAngel For Beginners
Yeah I thought that, but the search facility seems to give so many inaccurate results that it just takes too long to go through all of them.
I'm just not technically minded, as I'm sure many others on here aren't, so more often than not we are stumped by the simplest of things.
Oh well...still far better off with the xda2s than anything else!
I understand your point on the search, it takes time to work it out and some things you just can't search for as they seem to be blocked.
The problem that we have is trying to work out the post that are based on the fact the the user has tried to find a solution and the ones that just have not.
Take the upgrade issue, we have wiki and it points you to a thread that reads Wiki, help me and yes I have read getting started. So Why do we have new threads that read upgrade failed?
On good days some of us point new users in the right direction and on bad days some of us don't. Would be nice if it was not allways the same ones.
That's the problem I had also. I'll search for stuff, but when I get results, a lot of them conflict. Not only that, but in the wiki there are things that branch off onto multiple levels. If someone ran a graphical link checker, I'm sure one would find a spider web.
I've found that I got more precise answers by posting and getting a response than going to the wiki. Although, I actually learned more by reading through the wiki....after I did what I needed to do first.
I use Linux and in the config file for Postfix, there are a million things that you can change. Looking through it I thought I had to change everything. Turns out, after I asked, I only had to make 2 changes to get it working.
I'm sure the mods and the expert posters do the best they can, but I'm thinking some spring cleaning needs to happen....from a newbie's point of view.
Tom
Tom
On the wiki side its an open site, so if you have a login you can change what it says, correct it or even add to it. Thats the whole Idea of it.
I know that its not perfect well I should anyway. However its better than nothing, it can be fixed by us all and not just a chossen few. Please remember that these people don't have the newbie frame of mind so they write what makes sence for them, leaving out information that should be understood by the reader if he is in that section. (Like the kitchen)-
So if you feel that it needs cleaning up then please do it, you have the rights, you have gained the knowlege so its all up to you or others.
Well here's a little update as to my experience upgrading the ROM and all the other bits.
It sucks! My xda2s was damn perfect before I upgraded. Since upgrading I have had to soft reset about 5 times a day, just because it decides to freeze on me.
Then, when you take it out of its cradle, it freezes...EVERY TIME!!! So whenever it comes out its cradle i have to soft reset!!!
Shurely shome mishtake??!??!!
And surely it's been fixed with something by someone on here that has 'the knowledge' (for I definitely do not, in case you hadn't noticed!).
And the benefits?? Er.......well the phone screen looks a little different...ummm.....that's it. I think. Oh yes, did I mention it freezes whenever it bloody well feels like it??!?!
Here's what the figures are now....for those of you that know what they mean...
ROM version: 1.31.00 WWE
ROM date: 12/13/04
Radio version: 1.06.00
Protocol version: 1337.38
ExtROM version: 1.31.139 WWE
Annoyance setting: Maximum
Timescale to be thrown through the nearest window: Imminent
HPJ
Have you got the O2 'today' screen still running (with O2 button top of screen)? If so that's the biggest offender of lockups in my opinion!
I followed instructions here:
http://forum.xda-developers.com/viewtopic.php?t=18350&highlight=
and since then its only locked once in about about a month...before that soft resent 3 to 4 times per day!
sounds good I'll give it a go now.....will post my results soon!!
My word I think it's worked!
See I knew it would be something simple....just took someone 2 minutes to point me in the right direction :roll:
Cheers vince
I'll crawl back into my newbie hole now until the next problem.....!!!
HPJ
i was in the same situation...only having had my XDA IIs for a month or so...was extremely hacked off that it was so unreliable! BTW did you have the connections.exe or connections.lnk? There seems to be some variation between machines...though moving out either one seems to stop the dreaded O2 software loading up!
by the way, are you using wifi connections? My XDA IIs (and others from searching on the net) seem to have a lot of problems connecting (it says 'connected' in wifi but when you try and go to a website it says "page is not available")....however I found something that said try re-entering WEP keys for known connections....and from my experience this seems to work for me. My Dell Axim organiser never had this problem...so possibly another 'feature' of the XDA IIs !!!
vincexda said:
(it says 'connected' in wifi but when you try and go to a website it says "page is not available")....quote]
For me it happends when your ip and subnet mask (in connection card settings) dont match with the wifi net you are connecting to... the pda found and connect but can not go online because is not a part of the right network (i.e. 192.168.0.1 and 10.0.0.2 usually..or subnet 255.255.255.0 and 255.0.0.0) byez!
Click to expand...
Click to collapse

I DID IT!!

Woo-hoo!
I have finished the multiple hour process of doing the ROM and extended ROM upgrade!!! I am so proud of myself and had no one else to tell who would understand what the heck I meant - so I'm posting it here for my own personal pat on the back!!
Although I do think there is a need for re-writes for the BA incompetent because I accomplished this using wiki, here, and the BA standardization project yet still came across a few glitches....don't know how i figured them out but I guess after spending four days reading message boards and taking notes something must have stuck up there!! Also, it seems as if I had to piece meal the extended ROM update - which makes me hope I did it right but one of the places I downloaded it from was missing all the nbf files??
BUT....who cares now!!! I'm just excited I finally got it done. Now I can relax and have a drink or few and tomorrow start looking into the current radio update and the BT updates....but quick question....not that I am being lazy - but are they really necessary if I am not using a BT headset, and rarely use BT for anything else? After all the problems people had I just got a wired headset and can't even think about WM5.0 till they fix the sound issues for the SX66 - variable ringtones is an absolute must! Also, I rarely (like once a month) use the internet on this device so do I need the radio upgrade?
Another issue - can anyone explain why after doing hard resets active sync makes you set up a new paternership? I don't mind since it still ends up giving me all my Outlook info - but just was wondering why?
Well....off to do hubby's - hopefully his will take less time!! :roll:
THANKS to all who have contributed to XDA forums, wiki, and the BA standardization project - I couldn't have done it without your info, insight and problems you experienced!!! :lol:
not 100% sure, but I think the HR makes the thing reset everything... and... well..
I always change the name of my device...
And it tries to call itself PockePC again...
And the computer doesn't like that.
But if I change the name back to whatever it was and connect to the computer it tells me the name is in use. And that's annoying...
Before you slap that sucker back in the cradle, go to AS, FILE, Delete Partnership (you'll have about 100 from the way I read your post ) And... Well... Re-set it up using whatever name you wanted to use that it wouldn't let you.
And... if you're already doing this and are just wondering why it's necessary, look at the name of the software manufacturer and I'm certain you'll see the reason for your dificulty

time zone keeps switching to GMT -5 Indiana

Help i need it to be GMT -5 Eastern my calendar is not correct! I switched to the 2.3 ROM and this started happening any way to tweak a default so it won't switch??
Allow a fellow newbie who asked the same question to help.
There is a problem, not with the ROM but with towers. GO to settings\Phone and in the Time Zone Tab, deselect auto change. Remember that if you travel you will have to change the clock manually.
Hopefully a fix will come out for this as some point, either from Cingular or one of the great guys here.
Enable Time Zone Tab
And if you don't have the Time Zone tab (it's under settings->phone) you can run this cab from the T-Mobile ROM to enable it. You can also edit the registry, but for those that don't want to play with the registry this is a bit easier.
Hope it helps.
darn... i should have found this!
Thanks to all the feedback, feeling stupid now..
Re: darn... i should have found this!
rwardmi said:
Thanks to all the feedback, feeling stupid now..
Click to expand...
Click to collapse
Don't feel stupid. That one caught most of us on this release! Being in South FLA when it switched to Indiana really threw my Calendar coming from my Exchange 2003 into a snit.
My father used to tell me that there were no stupid questions ... unless you kept asking them ...
Steven
chow
Thanks
I have a same problem, everytime I do soft reset, my time changes to GMT -4.caracas :twisted: ...glad I found this post and would like to thanks everyone for solving the problem. 8)
I had this same problem on the AKU2.3 ROM and just switched it off as well. Mine was switching me to Saskatchwan or something like that, and it was an hour off. Anyway, I'm almost certain I had network time updating on with the 2.17 ROM but it always read the correct location. Wonder why the new ROM is dorked up...
jorge_culv said:
I had this same problem on the AKU2.3 ROM and just switched it off as well. Mine was switching me to Saskatchwan or something like that, and it was an hour off. Anyway, I'm almost certain I had network time updating on with the 2.17 ROM but it always read the correct location. Wonder why the new ROM is dorked up...
Click to expand...
Click to collapse
My guess is the registry hack enabled something basic while this newer ROM implemented something more. 2.17 seemed to work just fine. I roamed in good test cases and it worked without a single problem (I'm based in Atlanta but took the phone to Toronto, Seattle, Anchorage, and San Jose while on 2.17). I felt like Johnny Cash last month! http://www.azlyrics.com/lyrics/johnnycash/ivebeeneverywhere.html
As soon as 2.24 booted, it was screwy and made me wonder if I picked the wrong time zone during set-up.
Maybe the new ROM can't figure out where it is because it's so freakin fast! I'll take the speed over time zone automation any day but it was nice while it lasted.
Yeah i definitely love the speed and will deal with the time zone. But I know in the old 1.08 the time zone setting worked fine, so I am saying that it is the ROM and not the towers and stuff that people are saying. But I absolutely love the new ROM.
Re: Enable Time Zone Tab
gamescan said:
And if you don't have the Time Zone tab (it's under settings->phone) you can run this cab from the T-Mobile ROM to enable it. You can also edit the registry, but for those that don't want to play with the registry this is a bit easier.
Hope it helps.
Click to expand...
Click to collapse
-------------------------------------------------------
hi this is understandable but my phone changes date to 3 days forward and dont know what is heppening please help
thanx
Oh yeah, don't get me wrong...this is a MINOR annoyance compared to the speed and stability. Definitely worth the trade off. The few times I'll travel, I'll just switch it manually!
still no timezone settings
I have a stock phone... I installed this cab and nothing happened...
I however tried downloading this first from my phone and it was a php file...
same size so i think it was actually the download but named php.. so i changed it and installed it ... nothing new... soft reset... nothing new...
so i just downloaded it from my laptop and installed the cab onto the mda and ran it... nothing new... soft reset... nothing new...
im checking settings / personal / phone
its just not there
upgraded rom and now I have that tab... however...
if my network is picking up a time later than what I have and that is the network time then what time do my nights and weekends free night time minutes start then ?
just a thought?
is it my time or the time the time it thinks it is in Indiana?

I love this ROM!

I flashed my MDA about a week ago, and thanks to this forum (everybody), and XCPUScalar, I have a unit that boots up a full 80 seconds faster (from about 190) runs substantially faster, like getting immediate response from Pocket Informant instead of waiting 8 or so seconds, and has needed no soft-resetting since I upgraded (although one should do it on occaision, so I do). I have installed about 35 apps, and that process was cut from a few hours to less than two (with distractions).
I have one issue, and it probably isn't the MDA. My WiFi won't connect with my XP home workgroup network. I'm looking into that. Any help would be welcomed.
Did I mention I'm a newbie? And if you haven't done this yet and you're having a hard time finding instructions, there all in the installation file, just make your backups and jump in, but make sure you have the right ROM/hardware combo and phone service.
Is a MDA the same as a Cingular 8125?
Which ROM did you use?
What did you use to backup?
I'm a newbie also. I want to do this. I've been reading this forum for 2 weeks. I still don't have much of a clue. If I was certain that I could get back to where I am if I screwed up, I'd be more willing to "jump in". I have flashed routers before so it's not totally foreign to me.
Thanks for any help/advice that you are kind enough to throw my way,
Porter
Which ROM is this?
Yes. Could you identify this marvelous ROM?
yes, i love her, too.
Since I've not heard about an update to XCPUScalar which supports OMAP processors, I think this guy has got the wrong forum.
you say you love the rom! But which ****ing rom do you mean exactly?
Sorry. T-mobile USA 2.24 Custom ROM
Here's the link that got me there:
http://forum.xda-developers.com/viewtopic.php?t=53300&highlight=tmobile+motorola
There is another ROM for other service providers (Cingular) that I hear is just like this one but has a higher number, like 3.x. There is a link in the thread on page 7 or so. ??? There is also a newer version of the T-Mo USA ROM available, but I can't reflect on that.
The MDA also goes by the Name MDA vario, Qtek 1900 (I think), and Wizard. I don't know of any other names. I learned this by searching for leather cases on Ebay. The pictures said it all. I highly recommend being sure you know all the names, particularly the HTC name, of your unit before trying to tell it with a new ROM what model it is. If they don't match, you could mess up irreparably, although there are developers here who might argue about the irreparable part, I don't have the skills or time they do.
Read, be sure it all matches, and *then* thake the plunge!
Hey, the XCPU Scalar works. ???
I am one of those people who is willing to try unheard-of things. ImmierSoft made my MDA go faster, I don't particularly care how.
And I'm not a guy.
XCPUScalar uses a different processor than what the Wizard uses. Unless you are imagining things, you are probably using a ppc other than the Wizard.
Did it not appear that I understood...
... the processor types were different? It's not helpful to be condescending for you or for the person you're talking to. It's Immiersoft's XCPUScalar, and a T-Mobile MDA (US), which is the Wizard. There are certain things I can do woth the software to make the unit crash.
"There was a little girl who said why
can't I see my ear with my eye
I'm sure I cn do it
if I put my mind to it
You never do know til you try!"
Why so negative?
I'm signing off of this forum
I'm pretty fed up with the lack of social skills on this forum, particularly the moderators. I personally can't afford to risk/try this kind of hard work at this point in my life. If you have further questions, please search the forum, there are likely some sort of answers to your question. (e.g. looking up the latest ROMs for your model to see what's available to you rather than asking me what I'm talking about. thanks all for your interst and time!
...nevermind...
Janis, if you have a Wizard (and not, for example, a Magician - check the pics on the forum index) then XCPUScalar has no effect on your processor speed. I checked their website, and they still do not support OMAP processors. XCPUScalar is designed for (Intel) XScale processors (and one other type, which escapes me) - it is not a generic ARM overclocker. So far, only OMAPclock is able to overclock the OMAP processor in the Wizard.
I also think some people on this forum should grow up and stop acting like children when someone says something they don't like, or in a manner they do not like. I don't see your reasoning, Janis, behind "spitting the dummy out" when someone wants to know what exactly you are talking about when you start a brand new thread with no reference to anything solid in the body of it.
What is funny though, the first post of Janis contained comments and 1 question:
"I have one issue, and it probably isn't the MDA. My WiFi won't connect with my XP home workgroup network. I'm looking into that. Any help would be welcomed."
Maybe one of you "experts" could try to answer or help on that one........
wifi problem
i just upgraded to the Tmobile 2.26 ROM and also have the same wifi problem... my wifi wont connect to my dlink 900AP access point. It was working fine before the upgrade. Any ideas? Thanks
Not sure if this is the case, but I'll give it a shot.
If you just upgraded your ROM, I believe it wipes out any registry settings you had previously changed.
In the case of a wifi network, if you're running an 802.11g-only network then you will have to go back in to the registry of your Wizard and enable 802.11g on the Wizard for it to connect.
You'll also need to re-enter any network keys as they were wiped out as well.
Like i said the processor for XCPUScalar is for XScale, not OMAP (which is what the Wizard uses). I'm sorry if you took my comment in the wrong manner and took it personally.
As for the question in your original post, well check to see which network you are on (G, B, or mixed). The Wizard is originally set on B without registry changes (unless T-Mobile fixed this). If you have set your wireless network setup with a password, try setting up your network without a password just to confirm if a connection can be made and your problem is a security issue. If that doesn't work, I find that making registry changes to the MDA for a G connection works perfectly whenever I try this. Just make sure you set your router on the G network and try again. Also try to set you wireless connections on your phone to performance and see if that changes anything.
And for the others don't judge me. How many times have I asked for help and got no response or a negative one. I don't even recall ever getting a thankyou for helping anyone on this site. Everyone tends to ask for help then I never hear from them again. Sound familiar? I thought so.
I decided to edit out my venting ... doesn't do any good ...
btw, I agree that you should check out your registry settings regarding the WiFi.....
"Hey guys, this ROM is great!!"
"Which ROM?"
"**** you!!"

HTC TyTn 2 - Some Info on GUI for Newbie

Hi,
I have a HTC TyTn 2. Its on orange, and the details of it are:
ROM Version: 1.81.61.2 WWE
Radio Version: 1.27.14.32
Windows Mobile 6 Proffessional
I find it really boring and am looking for something to spice up the GUI.
I seen software on here called Cube. I was wondering if it actually works, and if there are any implications or lost functions related to installing it.
This is my first post, so i dont really have a clue what it is.
Also my phone is a works phone so it needs to be stable and retain all the Origigal functions.
Can anyone suggest anything??
Thanks
Gaz
There are some versions of the original "cube" as produced by HTC, which can be re-used on various devices for which it wasn't designed.
However, a number of our fellow members have written good or better 3rd party imitations of the cube launcher - try searching for cube and having a look at some of those ones.
IMHO the cube only has limited function, and you can do better with a well configured "Today" screen. There are hundreds of threads on modifying your today screen, and many screenshots for insipiration. Have a look at some of those.
At the end of the day, if you mess up your phone software wise, you can always "hard reset" which will reset to factory conditions, wiping all of your dodgy software off.
V
gaz_0001 said:
Hi,
I have a HTC TyTn 2. ...snip... Can anyone suggest anything??
Thanks
Gaz
Click to expand...
Click to collapse
I notice that this is your first post. A friend of mine once said the enemy of "good" is "better".
It is important to remember that you are about to consider messing with an expensive "phone". It is possible to make it (read the MANY threads here) work less like a phone than you might want.
If you did that (messed up) to your phone - how upset would you be...can you be without it for a couple of days while you sort things out?
Make sure that you read the WIKI/STICKYs at the top of the messsage board. It is interesting reading acually. If you have a hard time with them you need to leave your phone alone. If you understand what they are saying, then considering a change to your phone might not be too difficult.
Bill
whk said:
I notice that this is your first post. A friend of mine once said the enemy of "good" is "better".
It is important to remember that you are about to consider messing with an expensive "phone". It is possible to make it (read the MANY threads here) work less like a phone than you might want.
If you did that (messed up) to your phone - how upset would you be...can you be without it for a couple of days while you sort things out?
Make sure that you read the WIKI/STICKYs at the top of the messsage board. It is interesting reading acually. If you have a hard time with them you need to leave your phone alone. If you understand what they are saying, then considering a change to your phone might not be too difficult.
Bill
Click to expand...
Click to collapse
Jeez Bill , I'm afraid to even press a button on my phone now.
Seriously, look at this page, there is nothing on this page that can't be undone. You will learn a lot and your phone will be "kwel "
http://wiki.xda-developers.com/index.php?pagename=Kaiser_software_recs
denco7 said:
Jeez Bill , I'm afraid to even press a button on my phone now.
...snip...
Click to expand...
Click to collapse
Yeah - I realized that I made it sound scary - but I wanted to convey (since it was specified that this is a work phone and has to maintain the original stuff...) that there was some risk - that reading was required and should be done before jumping off and trying things and then having the phone not available.
But - honestly - if what I said "scares" you - you probably ought not be messing with your "work phone" - don't you think?
Bill
I want to add
2008-04-29 Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700
to my phone.
My question is do i need to upgrade to WM 6.1 first, or does this do it for me??
Do i need to do a sim unlock first??
Do i need to CID unlock first??
Ive done the reading of the wiki's but im not too sure!
Please help
Then you haven't read the wikis all the way through..
Also if that is a work phone I wouldn't flash any rom on it. (which duttys is a rom)
gaz_0001 said:
I want to add
2008-04-29 Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700
to my phone.
My question is do i need to upgrade to WM 6.1 first, or does this do it for me??
Do i need to do a sim unlock first??
Do i need to CID unlock first??
Ive done the reading of the wiki's but im not too sure!
Please help
Click to expand...
Click to collapse
Yes you will need to do all of the above, but TBH if you are after retaining all of the orignial functions of the phone then a flashed ROM is about as far away from that as you can be. It adds a lot of extras in removes a lot of bloatware etc. To answer your question yes when you flash a ROM it will auto upgrade you to WM6.1
EDIT: Beat me to the puch there Chumley
mmmn.
May be you guys are right, leave the thing alone. Its just so boring though.
It is a works phone. I have to use it to access corporate network internet pages, and to telnet into certain systems. Also they are supposed to be able to track us from them via the GPS inside.
Do you think changing the ROM would be a bit dodgy???
Are there any other options to make it a bit more fancier, the thing is so dull, but Duttys Rom looks cool.
gaz_0001 said:
mmmn.
May be you guys are right, leave the thing alone. Its just so boring though.
It is a works phone. I have to use it to access corporate network internet pages, and to telnet into certain systems. Also they are supposed to be able to track us from them via the GPS inside.
Do you think changing the ROM would be a bit dodgy???
Are there any other options to make it a bit more fancier, the thing is so dull, but Duttys Rom looks cool.
Click to expand...
Click to collapse
Again , Look at the page I told you about in the fourth post. Home plugin, HTC Home Customizer, Point UI , Spb Mobile Shell. These are all window dressing and will not effect the function of your phone like a rom switch ( good and bad ) will Look here for inspiration
http://forum.xda-developers.com/showthread.php?t=336013
if you are just after the "dutty look" then there is no need to flash a whole rom just to achieve that "look". you can just change you theme, install apps, change the skins etc, and you phone will look way cooler, in fact you may even become more attractive to the opposite sex
Cheers,
Just put the Slither C++ Cube thing on. Its sweet.
XtreMe_G - no new women yet... maybe it needs 24 hrs to kick in.... we'll see.

Categories

Resources