when I have programs opened using files in my sd ( dane-elec and sandisk ultra II , it doesn't matter) and I receive calls or radio interferences,the xda IIi crash and I have to do a soft reset...
i tried changing rom, but the problem persist!!!
..do you know a solution of my problem??
Probably down to your sd card.
some sd cards just dont work well with the xda2i
if you can get a trancsend or kingston card for it as they seem to work well with this phone
yup yup....i can feel the different after using Kingston....
HI!!!! I solved my problems with transcend sd 1gb 80x 8)
Related
Hi,
I need some urgent help...
today i got apacer 1gb 60x sd card.
the card does not allow any write function when it is in my pda2k, thru active sync or thru file explorer on my pda2k,
though it works fine in a card reader, can write and delete on the card.
my older 1gb mmc card is wirking fine in the phone.
i also formatted the card using a card reader, even that does not help.
i tried a format utility on ppc, but that can't do anything on the card, it says the card is read only or the access has een denied,
pls help me!!
I have the same problem and I can not fix it.
I think its the quality of the card.
Same problem here.
For future Reference it is a 1GB, Pretec High Speed
my friend bought 2 cards and sent one to me,
his pda is O2 xdaIIs and mine is imate pda2k, both blueangles..
but the card is working on his pda, and not mine..
hardware is supposed to be the same from HTC...
i fail to understand how can this happen.
Possibly the size of the card, 1gb, is the problem?
FWIW, with regards to size, I use a 2GB Sandisk card in my XDA IIs without any problems.
ejdmoo said:
Possibly the size of the card, 1gb, is the problem?
Click to expand...
Click to collapse
1gb mmc card is working fine on this phone..
so size should not matter..
i can read the stuff from the sd card... but can not write on it when it is in pda, i'm able to write to it by using a card reader..
Actually I think it may be the speed - 90x on this end
can anyone help? ive just brought a 2gb sd card and my o2 xda iis wont read it? is there a patch or software to help?
2gb cards are general ones any pda can read them if u r getting any problem try some other cards on ur pda, if they works repalce the 2gb asap.
tried a 128mb card and it wont read that either...
Make sure the card isn't a SHDC-type of card (most likely not, but one never knows).
Does the phone even see the card, or does it just have problems reading it?
Tried reformatting it in the phone? A known issue is many programs on a stand alone computer will try to format SD cards as drives (floppy or otherwise), which is the wrong formatting for flash devices.
no its not a shdc card.. ive no idea how to format the card in my phone ( a o2xdaiis), it shows the slot in use but no storage card
rewster36 said:
no its not a shdc card.. ive no idea how to format the card in my phone ( a o2xdaiis), it shows the slot in use but no storage card
Click to expand...
Click to collapse
Well, you can format it from your computer using a card reader and the flash formatter software from panasonic, or you can get an evaluation version of various different programs for the PPC platform that will do it as well.
Google for it, there are a lot of different ones and I've only ever used the panasonic software and a usb card reader.
not hain any luck .. got a flash card programme but my xda wont read any memory cards at all
rewster36 said:
not hain any luck .. got a flash card programme but my xda wont read any memory cards at all
Click to expand...
Click to collapse
If the cards are readable with the computer and/or other devices but not in the phone, I would suspect a hardware or potentially software problem with the phone.
Has the phone been able to read any cards at all, or is this the first one you have tried?
Have you tried backup up your data and hard resetting the phone?
tried a 128mb card and the 2 gb.. it reads the slot in use but no memory card ..think the problem may well be the phone... it had mobile 2003 on when i brought it have now upgraded to mobile 6 and still donrt work
rewster36 said:
can anyone help? ive just brought a 2gb sd card and my o2 xda iis wont read it? is there a patch or software to help?
Click to expand...
Click to collapse
i use normal apeed SD is ok
run 4D SDHC , ths pda can't detect the card so
use 2G non SDHC is OK
Ok so i bought this verbatim microSD 16gb class4...at first it worked fine on my xperia x8...but today it just decided to not be located at all...
On my pc the card is working properly with the card reader and i tried another sd on my x8, and it worked too..but the 16gb still wont be located...i tried everything from formating it to reboot etc...i tried the 16gb one on a x10mini but no luck either...
any recommendations?
oh and the shop said that they cant do anything cause this maybe my fault
Please help...
I had the same problem with 8gb class 4.
I did like what you did.
Finally it didn't work, I returnd it back to the store.
What I understood is: class 4 sd cards are not working on our x8.
because I asked the guys here and they were answering that they have a working sd cards on x8 but with classes like 2,8,10 not 4!
Sent from my X8 using xda premium
1Fawwaz thnx for your reply
but i could use it for about 2-3 days...and the same happened with an 8gb card but i dont remember of what class..
any ideas anyone?
[UPDATE]
After many experiments i found out that my card was working with thsd card adapter that SE provided once...the one that is like a usb stick...but with a MicroSD to SD adapter,my card wont be located by my pc...
[UPDATE 2]
The card is working fine on my sony ericsson yari.
also i read through the forum that others are using class 4 and its fine..so i cant see why mine wont work...come on guys..you have fixed far more complicated issues...
bakas666 said:
but with a MicroSD to SD adapter,my card wont be located by my pc
Click to expand...
Click to collapse
If the adapter you refer to is really a mSD to SD adapter then your PC would do the right thing(TM). To read a mSD you need a MicroSD to SDHC (<--!!!!) adapter.
SD, SDHC and SDXC are three totally different standards not really compatible to each other.
bakas666 said:
[UPDATE 2]
The card is working fine on my sony ericsson yari.
Click to expand...
Click to collapse
Then there you have your confirmation that the card is actually working.
If the X8 and X10 is refusing the card, then you may have hit a incompatibility (EDIT: that's why it is important to either straighten it out with the dealership that you can return the card in case it doesn't work or that you can try the card right there in front of the eyes of the shop dude). The only way would be to swap the card with one of another brand (like Kingston or SanDisk ... I wouldn't buy Verbatim crap).
In theory the X8 should be able to accept mSD's up to 32GB.
bakas666 said:
also i read through the forum that others are using class 4 and its fine..so i cant see why mine wont work...
Click to expand...
Click to collapse
True, I used a 8GB Kingston Class 4 mSD with my X8 - worked flawlessly.
thnx for your reply..
my card was working in the begining..so im not sure if this is really an incompatibility...
bakas666 said:
thnx for your reply..
my card was working in the begining..so im not sure if this is really an incompatibility...
Click to expand...
Click to collapse
Question is ...
- If you're running a custom ROM ... you tried another one?
- If you're running Stock ... you tried a custom ROM?
Also ... try putting the card into a _working_ mSD adapter and ERASE the partition that's on it. Then "Safely remove" the card reader / card from your PC and put the EMPTY (unpartitioned) card back into the phone. From there you have two options you can try ...
1. Try to partition and format (FAT32) the card in ClockworkMod recovery and see if it works now.
2. Boot up Android and format the card through Android (I think it's "Memory and Storage" in "Settings")
I tried with both stock and GingerDX...same result...im going to try this and post reply in some minutes..
nothing....i tried to partition with CWM..no luck....
I partitioned it with Partition Wizard..no luck again...
pfff...why it just denies to locate it?i was working just fine :S
I take CWM actually recognized the card even at its correct size.
The last thing you can do now is to look through logcat to see if the log holds any hints about why the card isn't recognized/mounted.
You better do that through adb as it's a medium pain in the rear to do that in the Terminal Emulator on the phone.
If you find something that could be related to the issue at hand post it here; maybe the error message carries something that would give a clue.
hi all ,when i 1st used a rom (any rom )there must be a friggin ton of problem ..so when i updated to GDX v21 i expected trouble, so yes it's a little buggy but i fixed / the problem just went away ..so theres just one problem which is a true , but then this problem is just presistant and i can't fix it ...=( so heres's the problem , the sd(8GB class 10 ) in my phone will say it's damage please format , so i did , but then the whole phone restarts without fixing the problem , so i tried 2 more sd card a 2gb class 6 and a 8gb class 10(?) micro SD card they all started fine but then it encountered the same problem , i faced this problem a week ago and i cant fix it , yesterday the memory was abler to be read and then today it says SD card error again.WTF??? i tried factory reset but it's still there use CWM and wipe dalvik and battery stats , no resolve i cant flash cause my sd card is dead , imma using PCC to flash my phone later but is it cause of SD card problem or isit my phone sd card reader is buggy?
details
-SE w8
-GDX v21
-MIcro SD 8GB class 10
-problem -SD card unable to read (says SD card is damaged) tried 3 diff sd card but all same
-well maybe a little off topic but my DSP manager seems to lags the phone badly when i turn on equalizer for speaker
Is your sd card kingston? I have the same problem, and found out that there is a compatibility problem with kingston 8gb.
SE claims to have solved it with an update but this is for stock rom users. So not me. I don't know if anything can be done and if any of our fantastic (slurp slurp) developers could help.
Sent from my X8 using XDA App
mine is apacer 8GB ...it's so dam annoying i flash back to stock but still have problem i flashed like 6 times now and it's finally ok...can read sd card so far...but still going to the retailer and asking for a refund if the problem occurs
tohno said:
MIcro SD 8GB class 10
Click to expand...
Click to collapse
sonik_5 said:
Is your sd card kingston? I have the same problem, and found out that there is a compatibility problem with kingston 8gb.
Click to expand...
Click to collapse
Not able to confirm again ...
There's a 8GB Kingston Class 4 in my X8 which is working perfectly fine since the last 7 months (GDX v021 on Stock Kernel).
However, as there's been another one posting about SD card problems who also has a Class 10 mSD ... I would rather say the phone seems to have a problem with Class 10 Micro SD cards ... given my Class 4 and some Class 6 (if you search the X8 section) work flawlessly.
tohno said:
so i tried 2 more sd card a 2gb class 6 and a 8gb class 10(?)
Click to expand...
Click to collapse
The 2GB Class 6 _should_ work, given we have some posts around where people use a Class 6 mSD successfully.
But, as I said above, I would be cautious with Class 10 mSD's as there not only yours which gives trouble.
for some reason my phone is a magnet for trouble ...
I spoke to the guy that sold me the card and he told me to go by the store and try with either a kingston 8gb class 4 or an apacer 16gb class10 (that's what he has in store). I guess i'll try the kingston but i'll be away for a week so I'll have answers next week.
tohno said:
for some reason my phone is a magnet for trouble ...
Click to expand...
Click to collapse
Same here mate. Perhaps we shouls start a club.
haha yea...we are really poor souls =(
damn it i tried my sister's sd card ( just to confirm my problem ) i connect it to pc and all is fine ...then i click turn off usb storage and it says blank sd card ...i guess i cant confirm it's the hardware problem
Just as a related note now that I checked back...
The other guy who had about the same SD card problems was using a Verbatim 16GB Class 4. Seems as the X8/W8 is somewhat picky when it comes to the brand (manufacturer) of a SD card and the related class.
As I wrote in that post - either try the card in your phone right there in the shop (if the clerk agrees to it) or strike a deal that you can return the card in case you have severe troubles due to compatibility issues.
as always thanks BJ! you helped me so many times! so yeah i called my dad to send it to the repairman but i doubt it's the sd card problem since the other 2 i tried also failed to read ...it could initially until i restart the phone or connect it to usb then it will get the warning..i suspect its the hardware problem
My sd card is 8 gb . after make a partition it goes to 3.25 gb ..help
polar bear! said:
My sd card is 8 gb . after make a partition it goes to 3.25 gb ..help
Click to expand...
Click to collapse
u r making a partition by which way? if u made it ext2 so rest of them will be available as a sd memory and other memory reserve for apps. install link2sd that will show u if u r in GDX install root browser and find sdext u will know everything
I think everyones know about this mounting problem for sg i9000 user since update to JB..it would be great for those never had this problem since upgrade to jb but not for me having this problem..currently,i'm using kingston 16gb class 10 sd card on my i9000.i don't know this could happen because after upgrade to jb,my sd card showing blank sd card on notification bar and not supported something like that.i try to format it through my phone also doesn't work.i've been try other methods to solved it including partition my sd card but,result is still the same:crying:.and today i try to use my other sd card kingston 8gb class 4 and it working on my phone..i don't know why this could happen to my 16gb class 10 which more standard than 8gb class 4..anyones can help me to solved this?plz...
nope, i also got da problem recently, dont know da cause but changing sd was da method, as for me, any 16gb any class (tried 15 different sd with same value) but dont detect on phone, change to any 8gb or 32gb, working perfectly, tried adb, usb debug, partitioning (pc n cwm), formatting n lastly hit it with hammer , n still not detecting on fone. try any option available on xda n even LvL format not working. so i decide to buy a new 32gb for my fone.
Sent from my GT-I9000 using xda premium
Thanks anyway for ur advise and suggestion..for me,i believe our developers will solved this problem matter how.this cannot be because of the value of memory card i think,just like what u said try with different class.because when i was on ics before,my sd card working without any problem.the problem is maybe the android system for this model smartphone.or could this happen because of my memory card still on r/w protection?huh...i'm still looking for this solution.i won't waste my money again to buy new sd card.
:screwy:
Sent from my GT-S5360 using xda app-developers app