Hi there!
My father has:
-iMate Blue Angel with:
-1.40.00 ROM installed
-1.13.00 Radio installed
-1337.42 Protocol installed
-1.00.3900 BT stack installed
- Pioneer DEH-P70BT car audio system with BT loudspeaker support.
The problem is that when he's trying to call somebody, peoples on the other side says they can't hear him enough loud.Is there any reason why peoples can't hear enough him?
Is there any upgrade to solve this problem?
Experts!!!HELP!!!!
Related
Hi all,
Dunno about you guys but my new XDA2s is pretty paff when it comes to bluetooth. Scratchy sound, erratic volume, headset disconnecting randomly, poor range, etc etc.
I have used an old O2 G2 headset, a new O2 Bluetrek headset and most recently a Nextlink Bluespoon AX headset. All of them were nearly as bad as each other - except the volume on the AX is far less erattic. However, using them with my PC proved no problem so the XDA2s is at fault here!
I did find that forcing the headset to use headset mode rather than hands-free made a significant difference on the older models, however I cannot manage to force the AX to headset mode in any way (still waiting for tech support on that). The AX is let off though as its hands-free mode is as good as the headset mode on the older models, I just hope it will be even better when I force it to headset (if anyone knows how let me know!).
So - I have tried the following builds with my AX:
Radio 1.06.00 BT 3500 - BAD
Radio 1.06.00 BT 3900 - BAD
Radio 1.08.00 BT 3500 - Better volume and outgoing call, but bad for person on other end of the phone.
Radio 1.08.00 BT 3900 - Pretty much the same, small imporvement for me, no imporvement for other end of the line.
I am hoping we can keep a track of various radio and BT version in this post and try between us to figure out a good combination.
There is an extra audio dll
There is an extra audio dll for bluetooth that fixes some problems posted somewhere else in this forum.
This one fixed bluetooth headset enormous here.
I believe the dll you are talking about adds the high-quality bluetooth protocl, allowing stereo bluetooth heasets to be used for music etc. Does this make any difference to the normal bluetooth headsets though?
R
Hi,
Not sure how I got mine to work but I am using a Jabra 200 headset and it works great.
I am using a custom image of WM2003SE with the optional BT drivers and so far no problems - I found when I originally had similar issues I had to pair the headset again and then everything was okay (I noted the XDAII asked if I wanted to enable the headset support).
I get the odd problem where the headset icon disappears from the today screen but I found that its still there, just doesn't refresh so you have to tap the area and it comes to life.
The headset answers the calls after 3 rings (the headset creates beeps in time with the ringing) and when I dial the headset switches on after a second of making the call. The only thing I have noticed is that I cannot redial when pressing the button on the headset however it does hangup an existing call.
Cheers,
Godz
Hi finalzero - you say XDAII, do you mean IIs or are you using the II? My old XDAII worked fine - it is just this new XDAIIs that is giving me problems.
R
Bluetooth
Hi ,
same problem for me ,
Radio 1.08.00 BT 3900 - slightly better but not the best wit Jabra 250 V & Qtek 9090 ,
I installed BA_OEM_AudioGW CAB , downloadble somewhere around , but still problems .
When all of this will end ? Bluetooth is a nightmare !
I've had an XDA2 (several actually and got fed up of them being rubbish so insisted on an upgrade) now got XDAIIs. The bluetooth manager is aweful! Can't connect to my O2 headset, does't work well with TomTom3 and is generally crap!
Logged on to find out if anyone else is having trouble so please it's not just me, now all I need to do is find out how to fix it. I'm not a mega techie (but not too bad with the right support) and wondered if it's possible to use the bluetooth software from the XDA2?
Bluespoon AX
I have the same sort of combination Orange M2000 and Bluespoon AX and have the same nightmare sound quality - using Radio 1.04.00 and BT 3900. The AudioGW patch makes no difference (as posted above it's for headphone solutions).
Would be interested in the info you get back from Nextlink on the way to force the mode of the device if possible. Otherwise it's a complete waste of money as it crackles at both ends.
Nothing back from NextLink - have sent 2 emails. With radio 1.08 it sounds fine to me but the user on the other end reports it still quite bad. Gonna do 1.10 soon and see if that helps...
Rich
XDAIIs Bluetooth - upgrade to a Jabra 250
I had similar problems with my bluetooth Jabra 200 so I upgraded to a 250 (the black one) and I didn't have any further problems. The vibrating alert is really neat... 8)
bluespoon AX
while we're waiting for Nextlink's reply - can anyone advise me as to whether an upgrade to the Radio version (I'm only on 1.04) requires a hard reset (and full software re-build) or not? If not - are there instructions on another post that say how to do it??
Upgrading to radio ROM 1.08 or 1.10 may improve your BT performance significantly -- I updated my SX66 to 1.08 a couple weeks ago and my Bluetrek G2 headset now works much better.
Radio ROM upgrades do involve a hard reset & software re-install; this thread is devoted to the 1.10 upgrade -- there's another one in this forum for the 1.08.
Hi,
I bought a Pioneer DEH-P70BT car stereo it has a internal BT carcit BUT my qtek 9090 is not compatible with the head, my other phone a Ericsson Z600 works without any problem
But my 9090 won't connect to the carkit in de radio
this is also stated in de compatibility list on the pioneer site
if anybody can solve this problem for me, witch give me the option to lose the Z600 again and go back to 1 phone
the pioneer has BT 1.0 and works ok with the qtek S100
pls help
regards John
Hi John,
I am going to order the Pioneer DEH-P70BT soon since my Jabra BT800 headset seems to be useless when I try to call hands-free (this headset is obviously not the best candidate for QTek9090 and people at PDAShop in Rotterdam had already warned me due to compatibly issues).
Anyway, I was searching on the web to see if there are any experiences with DEH-P70BT till I found a few reviews at http://www.kieskeurig.nl
Go here: http://www.kieskeurig.nl/review/96D5EED1A819DFD3C12570230044CEC9.htm and search for Qtek, be aware that despite the official statement of Pioneer (see compatibility list of phones: http://www.pioneer-eur.com/eur/compatibility_Web.pdf) people use this player with QTek9090.
kind regards,
- Avareh
Don't use the register function on the head unit, instead tell it to connect. Then go to the phone and add a BT device with the code 1111. It worked for me with a JAMin.
Regards
you ******* hero. That worked!
Hi all,
I've just changed my old car handsfree with a Parrot CK 3100, that works great with my trinity, -but- tomtom6 (vers. 6.03 with Western Europe maps vers. 6.75) doesn't transfer vocal instructions to my car loudspeakers. According to the handsfree installer the problem is with trinity sw, but I think it could depend on Tomtom sw. Has someone had such problem? Thanks a lot for any answer
Sorry, I was wrong: my Parrot is mod. CK 3000, but problems remain...
I'm having the same problem with almost the same devices (P3600 and CK3100) with TT6.
Parrot is at the latest firmware release available.
I'm not an expert on WM5 but the problem could be somewhere in the audio setting around the handsfree service.
I'm not so sure about this is a real problem for me because having frequent interruptions while listening to the radio or cd is not so good.
However if it exists an option to switch the audio on/off....
Sorry not to be helpful
Unfortunately Parrot co. answered my question stating that only DM6000 model is able to transfer mp3 sounds and stereo ones generally from P3600 to hand free set. If only my installer/vendor said it to me... Anybody has got some solution?
i REALLLY want to stream music though the new Parrot mk6100 Car system.. i have a
Blue angel And recently i upgraded to
WM5.0 OS 5.1.195
HOWEVER for some reason when i tryed a Motorolla Stereo BT Headset i only got CALL Audio and no music atall!....
im a bit of a plank when it comes to upgrading this stuff however found it easy enough to change the OS what i want to know is....
Can the Blue Angel support A2DP
IF SO HOW!!!!!!
Do i need any bluetooth updates if so Where are they
do i need Anything Else if so What and How PLEASE PLEASE help....
This is a great oppertunity to be my own personal Jesus! and i will love you forever anyone got a clue????
For 2003: read this:
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
For WM5 and WM6 - it should work out of the box.
I'm having a problem with the bluetooth on the HTC with the bmw car kit (E46, 2004). It auto connects fine every time, but I can only make or receive 1 call. After that call has ended, it still claims it is connected - I can browse the phone book, but when the next call comes in it will ring through the car kit, but as soon as I answer it the audio comes out of the phone, not the car kit. The same happens if I initiate the call instead of receive.
It's not the car kit, it has worked flawlessly with previous phones (Sendo, N80) I just have a problem with this one. It happened with the stock rom (voda UK), and all versions of Dutty's.
Anyone any ideas?
Have you tried flashing a different radio?
I also had a weird BT problem and flashing a new radio helped.
Hi
How are you answering the incoming call?
My boss has a similar car to yours with BMW proffesional bluetooth and is running an HTC S710 which works perfectly.
I have found the although you are connected to handsfree if you answer the call on the handset and not via the bluetoooth controls then it will push the audio through the handset not the handsfree.
therefore are you answering the 2nd or 3rd incoming call on the handset or the handsfree?
I might be able to test my vodafone v1615 on this car kit during the week.
Tom
Hello,
I also have a BMW X3 E86 from 2004 with a BMW Bluetooth Kit ( I believe is the some as yours... ) and my Kaiser works great without any problems.
My Kaiser Radio version is: 1.27.12.11
I hope this can help you troubleshooting your problem!
pt_t830
well i have a Z4 ยด06 and all work fine...to be honest i haven`t try it after last BMW nav (Professional) upgrade to V.29 but before this all was OK...Otherwise there was no possimility to use it with a new N or E Nokia
Bluetooth BMW
Try Jetware handsfree extension, works on BMW X3 and HTC Kaiser
12/19/2007
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Click to expand...
Click to collapse
This is from HTC's website... I hope it will fix your problem
Thanks for the hotfix link, unfortunately I forgot to mention I had already tried it and it didn't work.
I have radio version 1.27.21.11, same as you pt_t830.
I'll try that Jetware handsfree extension..
Tom Williams said:
Hi
How are you answering the incoming call?
Tom
Click to expand...
Click to collapse
I have tried it both ways, but it makes no difference whether it is answered via the button on the steering wheel, the centre console or the phone - the audio will always come out the phone, not the car kit on the 2nd call. It does turn off the audio on the radio though, and it always rings through the car kit.
Even if the call is initiated from the car kit by browsing the phone book and dialling, no sound will come out the car kit - and then I realise it has already rung but the ringing tone has come out the phone and the other person has answered!
I had similar problems on my E46 M3. I have put jetware on and it's perfect now. I even get a mail indicator on the sat nav when I receive an SMS, never got that before!