Related
aladin2000 said:
Hi,
do you tried also a buttom to call with voice command application or a phone call ?
I've a HTC S100 and the sound is well but it's very difficult to start a voice commande or to recall last call because seem that the function "hand free" sometime is lose.
Sorry for my poor English !
Regards
aladino
Click to expand...
Click to collapse
I have the same problem with my handsfree headsets an Tytn II (kaiser):
i have a motorola H700 and a Scalarider headset for helmets.
They are bot NON-ADP and thyey support handsfree.
Sometimes the button on them stop working and I can't do voice dialing with Voice command neither repeat last call.
They appear as connected and If I manually call a number they work.
To get the button works again I have to restart the phone.
Maybe a fault in the microsoft bluetooth stack?
Also: my Motorola H700 has a flip and when you open it the headset turn on and get connected.
You should be able to answer phone calls by opening the flip.
Sometimes it works, but most of the time it doesn't connect if I open it while the phone is ringing and in that case I have to restart bluetooth connection to make it work again.
Microsoft or HTC should check end improve bluetooth stack!
Any hack around?
Can't we put the broadcom instead of microsoft stack on kaiser?
I wrote to HTC Support about this problem and they answered :
"Customer email address:XXXXXXXXXX
Good Afternoon,
The multi function button is the one small button with the led light in, not the big play/pause button.
If you try the other button, it should work.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
XXXXX
HTC Europe
[email protected]
http://www.htc.com "
That's incredible don't you ?
They beleive I'm idiot ?
Regards
aladino
Astonished!
Amazing answer!
Are they idiot?
I'll write them too,
I hope someone cleverer will read the my mail
and suggest the bug to the technical stuff.
I have a motorola H350 and have been experiencing the same problems. It's driving me mad. The problem makes the use of the hands free totally useless as it seems to stop working at the drop of a hat.
What I've found so far.
To get it working you need to turn on the ear piece.
Then turn on the bluetooth on the phone.
If you do this any other way it doesn't work. Once it's working you may or may not be able to hang up with the button. If that's the case it won't answer with the button either.
Once it's working it seems to work ok till either the headset or the phone's bluetooth is turned off.
Voice dial will not fire up until the main procedure if followed and sometimes it takes several tries.
I was wondering if this was something to do with the motorola but seemingly it's to do with the stack so getting another device isn't going to help I guess.
The bluetooth worked perfectly on the Hermes but immediately I got the Kaiser one thing alerted me to the fact that something was different.
With the Hermes, as soon as I turned on the bluetooth and the earpiece the phone would alert me to the fact that the motorola wanted to connect.
With the Kaiser nothing, even when I searched for a device. I had to find out how to put the earpiece into search mode before it would find it.
Very flakey and very disappointing. I hope someone finds a fix for this.
Anyone else experiencing these problems?
I've got an H700 and Jawbone. I do notice more crackle type sounds and lower volume on both using Kaiser compared to my 8525. The H700 connects within 1-2 seconds when opening it's flip and I have noticed that on occasion, if I walk away from the phone (eg. phone on desk) the headset may not reconnect when I return. The Jawbone has been fairly good at connecting and staying functional at all times but the volume is lower as noted by many people.
I would say that the stack overall is better than the 8525's for all the devices I've tried (3 headsets, 2 Laptops, 1 Garmin Streetpilot with BT Phone interface)
I am also losing the Voice speed dial & redial button from time to time. It also worked that way with my hermes, so I kinda get used to it...
I am now wondering if it is related to my BT earpiece (nokia bh-200 or something like this) of if it is the BT stack which has never been really working on all the device I could test (hermes, trinity, kaiser).
I allmost never had issue recieving call (I don't recieve much call while using the BT earpiece) but it is sometime impossible to initiate a call through the BT earpiece.
The simplest way for me to lose the voice recognition is to:
-Start BT on the phone
-Start BT earpiece
Phone recognize the earpiece, everything is fine
-Restart the phone
Phone & BT reconnect, but voice recognition & redial are gone
I would really appreciate of some of you could test my little procedure and report if it works of not. If it is working for some other BT earpiece I may change mine and get rid of this eternal annoying issue.
Thanks
Jabra BT500
I have the Jabra BT500 and same problem with the TyTn II.
The earpiece can't initiate a voice call...
Looks like HTC (or Windows), starts to deliver ROMs like Mr. Bill Gates does with his M$ crap...
If someone find a solution for this Bluetooth problem, please post it!!!!
Thanks a lot,
Kaiser and Moto H700 just do not work together
I also have a problem with the Kaiser and a Moto H700. The M700 button stops working randomly, the BT connection sometimes disconnect during the call at will.
I can still use H700 successfully with my old Nokia 6680, so the problem clearly is in the Kaisers BT stack.
I’ve made the BT update that HTC posted just recently for TyTN II, but it had no effect.
Fortunately, I have my old Moto H500. This one is working OK with the Kaiser, but. Like it was pointed here before me, the only way to get it working you need to turn on the ear piece. Then turn on the Bluetooth on the phone.
In case if the Bluetooth connection was disrupted for some reason, the only way to make it work is again swath Kaiser BT off then turn on the ear piece and switch on the TyTNs BT.
The Kaiser’s BT stack is not good also connecting with a PC, the connection is just not stable.
Just wanted to chime in and say I've had the exact same problems with my Tilt and Motorola H700 as various people have described here. I posted about it on the AT&T forum too, and no one there has any working solution either, AFAIK. I too tried the "fix" from HTC, and to no avail.
This is a pretty big disappointment for me; I love my Tilt, but Bluetooth is not new technology, and it's really inconvenient that it works so poorly on this phone.
Motorola headsets seem to have a problem with this device. I had trouble getting my H500 to connect and the voice button to work. Once I reset the phone when the headset was on and it wouldn't connect. I tried deleting and re-pairing. It took another reset to get it back. Fortunately I don't use that headset anymore.
jameselee said:
Just wanted to chime in and say I've had the exact same problems with my Tilt and Motorola H700 as various people have described here. I posted about it on the AT&T forum too, and no one there has any working solution either, AFAIK. I too tried the "fix" from HTC, and to no avail.
This is a pretty big disappointment for me; I love my Tilt, but Bluetooth is not new technology, and it's really inconvenient that it works so poorly on this phone.
Click to expand...
Click to collapse
The same problem.
But this time with the Sony Ericsson BT HBH - DS980.
I also put the "fix" from HTC, I gave them back and they change them with another brand new Sony Ericsson BT HBH - DS980, but the problem exists.
costas2by4AIO said:
The same problem.
But this time with the Sony Ericsson BT HBH - DS980.
I also put the "fix" from HTC, I gave them back and they change them with another brand new Sony Ericsson BT HBH - DS980, but the problem exists.
Click to expand...
Click to collapse
I just bought the same headset... cant get it work with the TyTN II - Kaiser but pairs without any problem with my TyTN I - Hermes... clearly it is the BT Stack
Way beyond my abilities, but cant the BT stack on Hermes be cooked into a rom for the Kaiser ?
I have a Motorola HT820 and a Motorola S9 both devices are working flawless with the kaiser.
Now i own a motorola S705 too , with this device my kaiser suddenly turn the bluetooth off (
regards
Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
adamcullen said:
Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
Click to expand...
Click to collapse
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
There is a know problem with the Parrot kit and you will find a thread in this forum where a member has contacted Parrrot who replied that they are addressing the issue.
This one my be usefull.
http://forum.xda-developers.com/showthread.php?t=340908&highlight=parrot
NuShrike said:
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
Click to expand...
Click to collapse
Hi, thanks for that pointer ... most of what is described in that MSDN library isn't in my registry.
Im going to manually insert them all and see what happens.
A
Still no luck
I tried updating the Reg with the tweeks as suggest ... but still no luck. All i get is still the initial pair, but on disconnection, no automatic re-pairing of the device to the car kit.
Im doomed at this stage.
You're not alone. I have the same problem with my Motorola S9 headphones and Microsoft SYNC in my 2008 Ford Edge. Sometimes I have to turn BT on and off a couple of times for it to connect.
agreed
Turning the BT on and off a few times has also be part of my "solution" package.
This really isn't acceptable though. This device should automatically pair up, just like every other BT device does. BT is a protocol that should be adhered to and just work.
I have also tried this on my other WM device. It pairs a little better, but is not great. I've tried compairing the registry values of that device to my Kaiser, but I just dont understand the functionality of the reg settings enough to work out what to change.
Is there some developer out there who can help? This type of problem was experienced by us all back in the early days of the Hermes and this community sorted it out.
Can any developer out there help, like working out a port of the Widcomm BT stack for Kaiser?
a
Interesting. I have a Nokia CK-7W bluetooth car kit and the Tyn II has re-connected/connected to the kit every time. Actually more reliable than my SE K800i. Sorry that it doesn't help you.
Hey Juzzman,
nah, that doesnt help ... but does increase the frustration level!
Seems like you need to have a Nokia component in there somewhere for it to work ;-)
Anyhow, Im still convinced it is a bluetooth stack problem in the Kaiser. I'm going to try flashing one of the AT&T based roms and the other radio version and see what happens.
Cheers
Adam
I've had BT issues with all of my HTC devices, it's very frustrating.
Currently I've got a Kaiser (Orange), E650 (Orange) and a new S730, none of which work on my Pioneer headunit without Jetware.
The Kaiser with Jetware pairs up ok, but the sound is really tinny.
The E650 with Jetware sounds fine, but I can only send 150 contacts to the headunit.
The S730 doesn't pair, haven't put Jetware on it yet.
In the past I've had BT issues with M3100, C600, C500 etc etc.
Why the hell doesn't MS sort out their bloody BT stack!!!
Bluetooth problems
I am having the same problem with my JVC bluetooth unit BT1000. It will pair ok first time, allows me to make 2 calls. Will not the reestablish a connection/pairing. JVC worked fine with my sony erricson and nokia phones. Anyone found a cure to this?
Same problem with the stock AT&T rom (1.27.12.11) with the H700 headset.
Turn bluetooth on it normally sees the headset. If not turn it off and on again to get it to work. Once working it normal looses the connection after an hour or so.
Could it be a BT 2.0 Compliant issue?
I have posted this same problem earlier in xda-deveopers, on htc wiki and aximsite. Many people have viewed and are experiencing this same problem, but no one has posted any solution specific to my problem either. I hope a developer can solve this one for us. Is it a BT stack problem, or a BT 2.0 compliant problem, or a need for an updated ATT ROM to solve this issue? (I currently am using the stock ATT ROM 1.57.. that shipped with my Tilt.)
When I use my Motorola H700 with the Tilt the BT works fine, UNTIL, I use the voice speed dialing from the Tilt. Once I use the voice speed dialing directly on the Tilt, the Motorola H700 will no longer connect. I have to do a soft reset or go through the pairing process again. Once I re-establish pairing again, the H700 will continue to work fine, UNTIL, I use the voice speed dialing on the Tilt. Then we're back to having to do a soft reset to again establish H700 connection with the Tilt.
NOW, I just received a call back from an HTC tech who told me the problem is likely due to the Motorola H700 being only BT 1.2 compliant. He recommended that I try the Motorola H12, which is BT 2.0 compliant, but he could not absolutely guarantee this would solve my problem.
Does anyone know for SURE that the Motorola H12, being BT 2.0 compliant, will solve my problem? Or is there another solution?
Note: I have tried MS Voice Command 1.6 (full version), but the above problem still occurs. I have also tried Jetware, but again, no go. I am not sure that there is going to be an updated AT&T ROM to solve this issue either.
Additional Note: I have also tried other BT devices, such as the Jawbone, and the Plantronics Voyager. All do exactly the same thing as above.
Anyone have any solution? If the Motorola H12 is the solution, that would be great...
Thanks in advance.
I'm having the same problem with my new carkit. Did anyone ever find a solution to this??
Hello people,
i've been searching but couldn't find a thread about bluetooth carkit probs with diamond.
I have a parrot 3100 and always worked just fine with the wm6.1 device I had (Prophet).
But with diamond it's quite a mess.
When phone rings:
- Parrot rings
- Answers call
- Parrot mutes (? Mute-symbol on parrot)
- Cannot unmute, on phone there is no sound.
- Sometimes parrot disconnects a second or two.
When making call
- Also mute problem
- Other line can't hear me, must talk in phone?
Even buggy, sometimes hangs, just working really annoying, cannot rely on the carkit. Missed several callers today.
But, sometimes it just works...
Anyone recognised this, any fix or workaround? It should be able to work propery.
Also wonder, why my parrot gives the contacts as contact /m for mobile and contact /w for work in normal list, instead of grouping them under one name (contact -> work, mobile etc).
Have you tried firmware upgrade on your Parrot 3100?
http://www.parrot.com/uk/support/downloads
OMG what an Idea.
I'll take this laptop into my car and fix it.
I have the same parrot and I'm having similar issues. It's annoying because when it gets "muted", the parrot is functioning as if had a call and it blocks the music from the cd-player and it won't get unblocked until I turn off my car.
I think I'll try to update the parrot firmware as staroip said...
you can give this software a try.
http://www.jetwaremobile.com/
This has been solved similar problems with my CK3000.
\\yoshi
Version 4.17 of the Parrot software more than solved the issue!!
* good contact syncing
* better voice quality
* no hangs at all
I'm happy
Hi all,
I also have problems with bluetooth and my Audi Bluetooth kit:
Connecting and phoning works fine but:
the phonebook:
- Names are wrong displayed (Surename and name are switched)
- on every number he deleted the "+" ... :-( on the car-screen (MMI)
In the phonebook on the diamond all Numbers have the e.g. +49 ... but on the screen in my car there is no "+" and of course the number without the "+" does not work...
- special chars like ä, ö, .. are not displayed correktly...
So what can I do, and whats that Parrot software you are talking about? EDIT: I just saw the parrot is an external bluetooth kit, right? So no solution with parrot software for my problem
FYI: I had a sony ericsson W950i with Symbian before and there everything worked perfektly with my bluetooth car system, so I hope I can also fix the problems on my Diamond with WM 6.1 ...
Thanks,
MrDiamond.
How did you update your Parrot kit?
Can you do it over bluetooth?
Been using the TD in my Land Rover (Discovery 3) with its bluetooth PTI. Works like a dream.
Auto connects, access to dialled, missed and received calls. Address book navigation using head unit and steering wheel control.
Better than when using my Nokia N95... that never did work with the recent called, dialled, missed lists.
Ironically the LR PTI is made by Nokia
Just need a power charger now as having a bluetooth connection running all the time kills the battery big time.
yerfdog said:
How did you update your Parrot kit?
Can you do it over bluetooth?
Click to expand...
Click to collapse
Yes, look at parrot site. New firmware is available there too.
Version 4.18 an same problems
Riel said:
Version 4.17 of the Parrot software more than solved the issue!!
* good contact syncing
* better voice quality
* no hangs at all
I'm happy
Click to expand...
Click to collapse
I update to version 4.18 of the parrot software, and the same problems are here.
What is your Rom and Radio?.
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Well with mine i have some hickus but it just happpends once a while.
Most irritating about Diamond and BT in my opinion is that wa have no equalizing for it. and the sound setup from the begining is horrible.
Asked here if anyone has a solution before but none replied.
But as far 2 your problem no. And i use a Pioneer system in my car.
Mauser.NET said:
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Click to expand...
Click to collapse
HI
Same was happend with me (Opel), when my battery is low.
orsiga said:
HI
Same was happend with me (Opel), when my battery is low.
Click to expand...
Click to collapse
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Mauser.NET said:
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Click to expand...
Click to collapse
I've a JVC head and my bluetooth has no problem.
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
davemazo said:
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
Click to expand...
Click to collapse
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Mauser.NET said:
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Click to expand...
Click to collapse
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
davemazo said:
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
Click to expand...
Click to collapse
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Mauser.NET said:
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Click to expand...
Click to collapse
Thanks again Mauser. I tried various settings but without any success, I think the phone is just not compatible with the Honda. Having said that I don`t have much luck with bluetooth at all on the phone. More often than not It just won`t detect other bluetooth devices and when it does it won`t send or receive files so it`s time for it to go and I can go back to a trusty Nokia
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Rapier said:
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Click to expand...
Click to collapse
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Yes, I have an Audi UHV 6634. Thank you for the info, I'll try that and post the results here. Though, my car-kit is not the advanced one and I don't have to sync anything with it (contacts or something else). It's most working as a plain hands-free device, no extra functions...speaking of which, I've noticed that on the phone is detected as "hands-free"...why not "car-kit" as I know a car-kit has other functionality as well? This is the "standard" BT device for any audio enhancements (even if it is a car-kit not a BT headset), or I have to activate something to be recognized as car-kit?
Mauser.NET said:
Jetware? I have also limited the phonebook sync to max 5 entries to debug
Click to expand...
Click to collapse
my Honda system doesn`t read the sim I can only dial out via handsfree using contacts i`ve entered into the Honda system otherwise I either have to read the number to the system and it will ring out (most of the time anyway) or make the call on the phone (illegally obviously) cancel the call and then say "redial" and the system makes the call. So uless I`m misunderstanding this setting I don`t think it will help me.
I`ve searched the Jetware website and I couldn`t find a fix for my Honda
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Rapier said:
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Click to expand...
Click to collapse
No thanx! I'm glad I could help
Mauser.NET said:
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Click to expand...
Click to collapse
Hello,
I have a Mercedes car kit and facing the same issue as you: everything works perfectly for a few days when hard-resetting my device, even with my 500+ contacts (they are loaded in less than a minute), but after a few days/weeks I can't get to have my call history or contacts displayed in less than half an hour!
Yesterday I thought I'd just hard reset my device because I had this problem again, but unfortunately it didn't work!
Guess what I have done differently this time: yes, I backed up and restored my call history, which I hadn't done the previous times! So I guess it is indeed related to the call history, but I can't test for now!
I have installed JetWare and limited the call history to 5 numbers, I'll try this tonight and I'll keep you informed...
Hello,
So I have tested this yesterday (installed Jetware and limited the call history to 5 numbers), and now it works FLAWLESSLY! I can browse through my 500 contacts instantaneously when I pair my phone with my Mercedes car kit.
So, in my case it was also clearly the CALL HISTORY that was causing problems... A BIG BIG thanks to Mauser for pointing out this!
I'm also having problem connecting my Diamond to my Volvo S80. All the other functions work except that I could not hear the other party through my car stereo and I also could not diconnect the call with my car end key.
I'll try the Jetware and I'll report back later. Thanks for the pointer.
turt said:
A BIG BIG thanks to Mauser for pointing out this!
Click to expand...
Click to collapse
No thanx! ... glad I could help
I have experienced few irritating problems with my Diamond when used in my Seat Leon 2008's stock head unit via bluetooth:
1. Phonebook is displayed always and I can call phones from there which is OK, however "Incoming Calls", "Outgoing Calls" and "Missed Calls" are not working always: sometimes I have those lists filled with the corresponding entries, sometimes all three lists are empty.
2. When I am running iGO8, the bluetooth connection gets connected and disconnected each 5 minutes or so.
3. The headset volume is really low. I didn't have that problem with my Sony Ericsson phones before.
Does anyone have any of those problems and know a solution for them?
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
try posting in the Accesories section, u might get more help.
marco899 said:
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
Click to expand...
Click to collapse
Pioneer isn't that good either, I had the Pioneer radio with Bluetooth and I couldn't get it running with my previous phone Trinity P3600 and with my Diamond it didn't work either.
Willem
I have used the stock head unit previously with simple mobile phones and it has always worked perfectly and I was very happy with the bluetooth implementation in Seat. So, I think the problem is not in the head unit (i.e. an accessory problem) but lies somewhere in the "phonebook through bluetooth" implementation in the Diamond.
Hello,
I have the same problem. I have a Skoda Octavia II (2007) with built-in bluetooth and a Diamond (ROM 2.03).
I use the iGO8, and it works fine, but the bluetooth connects and disconnects randomly in all ~5 minutes. When I shut down the iGO8 or when it runs on the background, the bluetooth works perfectly, when it runs in the foreground, the bluetooth disconnects again...
Who knows wat is this problem? Should I try a new ROM? A new radio version? A new iGO version?
CyberGene: Have you a solution for this problem? Or you use a different iGO8 or a different navi software?
Thanks,
DuckHead_
Unfortunately I didn't find any solution to the problem. To be honest, I am currently using a SonyEricsson phone and the Diamond is used by my girlfriend. We are still using iGo from within the Diamond but with no Bluetooth activated.
Thank you for the quick answer.
Why don't you just take your car into a car audio place and get them to check it out for you
I thought it so that the problem with Diamond. The BT does not work only if running the iGO...