Hi,
I have a k-jam and I was trying to update it to the custom ROM. it hanged at 98% and the update software crashed on my PC so I had nothing to do but soft resetting the device.
Now I cant restore to the original imate ROM and when I try to go to the USB mode it gives the colored screen and goes off immediately.
Please help...
hey i have had that problem stuck for 2 days, must be stressing eh?
hold camera + voice then push reset button for 3 seconds...keep holding the cam and voice button and wait for the screen to come on..then plug in.... usb shud show on bottom left..
i had that problem....couldnt get it to boot loader but after numerious tries, it worked.
It just needed some power
Wizard was totally discharged i recharged it and restored the ROM successfully
thank u
Related
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar
Hi, I sorry to bother anyone, but I need help because my phone is not responding and I don't know what to do.
C6603, rooted, dual recovery installed, bootloader unlocked (I think)
So here's what happened. I very successfully installed the existenz ultimate rom on my phone. It was a wonderful rom and everything was going well. However, I accidentally dropped my phone and needed to send it for repair. Before sending it to the shop, I decided to do a factory reset using the option in recovery mode.
When I got the phone back from the repair shop, I wanted to install the same rom. What I did was download the rom installer and then install the zip file using the recovery mode. I went through the AROMA installer and everything, So I thought everything was going fine. When the phone rebooted, it showed the SONY logo, followed by a permanent black screen. The screen is on, it is just black.
I scoured the xda forums and I tried several things, to no avail:
I cannot enter recovery mode.
My PC cannot recognize my phone.
Flashtool cannot recognize the phone. My phone can't seem to enter flashmode, either.
I tried holding the power button and the vol. up button, and the phone does indeed restart (no vibrations), showing the SONY logo, and then I'm stuck with the black screen again.
I hope somebody can help me!
EDIT: I managed to somehow get flashmode working, so I think my phone is fine now! What a false alarm! In case this ever happens to anyone, what I did was to unplug the phone from any source of charging, then proceed to hold on the power button and vol. up button for REALLY long, I think almost 20 seconds. This managed to switch my phone off (it would keep restarting if I didn't hold in down long enough).
download stock firmware and open flashtool & ready to flash,dont connect until it say.connect your usb cable to ur phone,then reboot ur phone when display goes to black connect ur phone to pc whith pressing vol down ,then flash tool detect ur phone and it flash,sorry foe my bad english
Hey Guys. this is my first time posting something.. but i really need you guys help.....
Ok week ago i installed stock rom V3 for MMX A250 using CWM, it worked just fine after flashing but yesterday i did factory reset and after that my phone kept restarting and at first it would turn off and turn back on till MMX logo and again it would go back off, so i left it for an hour so to let the battery drain off but now when i try to turn it back on....the screen light up for 1-2 second and again it goes back off.
It tried to go to recovery but when ever i click power button to select recovery mode, nothing happens and goes back to that on-off situation. Itried to connect it to pc but because of ON-Off situation, it keeps disconnecting.
So guyselp me out..... please help me out.........
hellcrook said:
Hey Guys. this is my first time posting something.. but i really need you guys help.....
Ok week ago i installed stock rom V3 for MMX A250 using CWM, it worked just fine after flashing but yesterday i did factory reset and after that my phone kept restarting and at first it would turn off and turn back on till MMX logo and again it would go back off, so i left it for an hour so to let the battery drain off but now when i try to turn it back on....the screen light up for 1-2 second and again it goes back off.
It tried to go to recovery but when ever i click power button to select recovery mode, nothing happens and goes back to that on-off situation. Itried to connect it to pc but because of ON-Off situation, it keeps disconnecting.
So guyselp me out..... please help me out.........
Click to expand...
Click to collapse
first charge your phone and then flash rom again.
i connected it to wall charger and kept it for like 4hours, the screen was off, so i connected it to pc it keep getting connects and disconnects, but the screen is off.
need help
FSadino said:
first charge your phone and then flash rom again.
Click to expand...
Click to collapse
hi itried to install twrp through sp flash tool but instead of using mt6589 scatter.txt i used mt65xx scatter.txt now my phone is stuck on rebooting plz help
Alright guys... Try hard reset... What you must do is get your phone to off... Once it's off properly wait for about 40-45 seconds and then press the power button and both the vol buttons simultaneously... Then there will be an option for vol up-go to recovery & vol down-go for factory reset
it happened to my A250 too. i tried all the above method yet no result...still stuck at boot loop. plz help .
i need help, a few days ago my phone freezes, shuts down, and wont back up again.
i tried all button combinations and nothing seems to work at all,pressing volume up + down and power button only result on a red light flash once
This isn't the first time my phone freeze, last month i exprience a hard crash and a bootloop, but i flashed it through edl mode and it works again.
this time it wont even boot up at all,i hit a dead end.
i tried to use an edl cable but it still didnt work, the only way to access the edl mode is to short the test point inside the phone.
that method works, i manage to get in edl mode, reflash everything, but the phone still wont boot up.
also all the hardware is fine, i checked everything including the ufs and it works just fine.
but for some reason it wont charge at all on both the side, and the bottom port.
if i leave it for a while and then charge it, i get a blinkin red light for a while and then it stops flashing again.
if anyone can provide help i would be very thankfull
summary : i successfully flash the phone, but it wont boot up, and also wont charge for some reason. it still getting some current going in, but not much.
My phone suddenly died few months ago and helped for me flashing kernel and at that time, the newest rom version of rom
CRYPTfromCATACOMBZ said:
My phone suddenly died few months ago and helped for me flashing kernel and at that time, the newest rom version of rom
Click to expand...
Click to collapse
if i may ask, does your phone still able to get into fastboot at the time ?
no it was completely dead - so i tried to press power button for long time nothing happened, so i left it and after a few hours i put it in charger and tried power on, then it booted,,, After that i did factory reset, falshed the newest rom + kernel and (knocking on wood) it never happened again