Database Develop

diamond doesnt work after load wrong boot_loader

hi buddys, i loaded wrong boot loader in my touch diamond.(http://forum.ppcgeeks.com/showthread.php?t=35839 it was there).after that, phone didnt open . power button, charge sign, hard reset dosnt operate..now nothing..how can i load a relocker/default bootloader to switch yours/wrong boot loader back to stock..

Try this
Remove your battery , Then inserted in. Hold Volume down And press Reset button.
Your mobile should go to bootloader(tricolor) screen.
Does it happen ?

Diamond freezes at startup

My diamond freezes on the startupscreen where you see in the lower left conrner the R, G and D versions in RED.
Can this be fixed?

Yeah I am rite now having the same problem anyone has any suggestions the soft-reset button doesn't work and it is not recognizing my network provider... anyone has any suggestions....

hard reset also doesnt work :-(

Yea since the soft reset button doesn't work I am not sure wht to do it is just stuck up on the startup screen can anyone give any suggestions please.....

if i only could acces the internal storage, put a rom on it, and do a flash with hard reset buttons, then it could be back 2 live but now

Can you get it into bootloader? {Hold Vol. down button while pressing power}
If it will go into bootloader, you can flash from there.

It worked
1. i've put it in bootloader [Hold Vol. down button while pressing power]
2. connected the diamond to my pc with USB-cable
3. Install the original rom
Thx supersanj

please help, my diamond won't boot up at all

Dear friends,
I was trying to flash my diamond with mtty, where i guess i messed up with commands, I formatted it, then tried to restart with "task 8" then my phone turned off and never on again no matter what i did or key pushed.
Any help will be much appreciated...

me too
but i don't know how to use Jtag recover BL for Diamond

Update ROM by using the BootLoader
Hello there,
even though you can't boot into your OS in the Diamond, there's a way to enter "BootLoader" mode. I'm not sure it works, but you can give it a try.
Here's how:
- Connect the Diamond to your PC
- Enter bootloader mode on your Diamond: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
- Use the ROM Update Utility. If the previous step worked and your connection is working, then with some luck you will be able to Flash the Device with the ROM update utility.
I've tried to find the thread that discussed this with pictures and such but couldn't. You might want to look for similar instructions
Good luck
Shane

JTAG
does anyone managed to JTAG diamond?

please i need serious help .....

hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .

try a hard rest

Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..

thnx .... i will try it ....

Dead phone after flashing TrinityVengance 1.3/1.4

Hi
I've flashed (including kernel) my phone (C6903) TrinityVengeanceRaptorXHD_1.3-XperiaZ1 and TrinityVengeanceRaptorXHD-LB_UB-Patch-V1.4 taken from here. Unfortunately after it was done my phone was also done.
There is no reaction on 3 buttons pressed at the same time and i cant get into flashmode or fastboot mode. Holding power button makes a single vibration that is being repeated as long as the PB is being hold.
Can anyone help me bringing it back to life? Can it be done not leaving the room or do i need some special tools or send it to guys that has these?
Regards
Wizzy

Hi
I've managed to rescue it. I'm not sure how i did that os i will put here steps that i've taken. Firstly i could not enter fastboot or flashmode by PButton + Vol UP or Vol Down button. I've opened flash tool and connected phone while holding power down button but after unpacking flash image it prompted to unplug the device and plug it again with volume down button being hold but nothing was happening.
So here are steps:
1. I've connected it to the AC and tired holding different combination of buttons ( to see if the led is working ). VIsualy no response has been noticed.
2. While flash tool was still hanged on prompted dialog i've connected the phone to the PC while holding volume down button.
3. It started flashing process.
Thansk & Regards
Wojtek