please i need serious help ..... - Touch Viva, MDA Basic General

hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .

try a hard rest

Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..

thnx .... i will try it ....

Related

Bootloader Problems

Please help I cant get my xperia into bootloader.
I've tried volume down and power technique, but to no avail.
Any suggestions? as I'm fed up of this damn o2 ROM.
Thankyou
did you turn-off your phone first?
again, turn-off the phone,
press and hold the down sound button,
press and hold the power button until the multi-color screen appear.
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
You must to press for long time,Until Tree-color screen to appear..
hirst89 said:
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
Click to expand...
Click to collapse
I dont know if theres other way to enter bootloader mode in x1...
try to search...
or maybe you can try hardspl again.
try two thinks please:
ONE:
turn of your pda by holding long time power on/off until a message comes and ask you "turning of?" (i write the short version).
than try bootlader-modus by 1. press volume down and hold 2. press power on/off and hold.
dont shocking by vibration - hold both buttons until bootloader comes.
TWO:
your pda is quite normal?
than you dont need make finger-gym. open X1_HardSPL.exe and wait two or three seconds. it extracts some files. one of this is "EnterBootloader.exe"
copy this with usb/activesync or flashcard to root of your pda. go with fileexplorer (pda) to root and klicki-micki and you straight fly to bootloader-mode.
okokur said:
your pda is quite normal?
than you dont need make finger-gym.
Click to expand...
Click to collapse
Love it!
But yes, make sure you done hardspl first. then power off phone then hold volume down and power do not let go of buttons until multicolour screen appears.
Tin.
TBH you don't need to hardspl to get to the tri-color bootscreen, just to flash with custom roms.
And if nothing works, remove and reinsert the battery then hold power+volume-down key until it vibrates and let them go when the screen shows up.
try taking the battery out first, then putting the battery back in. make sure that the phone is NOT connected via usb cable, or else it will automatically turn back on.
then use the power and lower volume key to enter bootloader mode.

I can not make hard reset :(

Help me please guys I can not make a hard reset or flash a new ROM with the sd card method. (right volume button and power button). also hard reset doesn't work. (press both silver button and power button).
before always its OK but now i only flash with usb method.
thanks a lot
Can you still hard reset using |START|SETTINGS|SYSTEM|CLEAR STORAGE|?
What rom and SPL are you using?
You might need to Hard-SPL again.
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
the banished said:
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
Click to expand...
Click to collapse
Are your xperia volume keys working properly because it can be hardware issue....
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Fulgore69 said:
Are your xperia volume keys working properly because it can be hardware issue....
Click to expand...
Click to collapse
I test de volume keys and work fine
the banished said:
I test de volume keys and work fine
Click to expand...
Click to collapse
Are you using volume down?
Turn the phone off, hold volume down (and keep holding) then turn the phone on. Make sure it isn't connected to your PC when doing this.
Edit: Does it enter the bootloader correctly when you are using the Rom Update Utility?
jhendra said:
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Click to expand...
Click to collapse
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
the banished said:
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
Click to expand...
Click to collapse
Flash back to an earlier rom, HardSPL again and see if you can enter the bootloader and hard reset using the key combinations.
Whats ROM recommend me for this problem Buzz
the banished said:
Whats ROM recommend me for this problem Buzz
Click to expand...
Click to collapse
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
buzz83 said:
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
Click to expand...
Click to collapse
Great info thanks I will Read
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
the thing is:
if you want to go into the bootloader you need to press and hold the power button and the volume button down untill you get into the 3coloured screen.
exactly thats is all i want but a can't
all The keys (Volumen, Power, silver keys) Works Fine in Windows Mobile. but i can not make hard reset with the silver keys and button power. or worse i can not enter to the bootloader mode with volume key and power key.
before all its ok but now its like the keys dont work at the start.
to do a hard reset I just keep holding both softkeys and then I press the reset button with the stylus.
try it this way.
the banished said:
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
Click to expand...
Click to collapse
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
buzz83 said:
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
Click to expand...
Click to collapse
I think the same. I try to search and Search but my english i not the best and is a double job. jeje.
Thanks a lot for the help Buzz I keep search any solution.
And as they say in Spanish forums if you dont find the the answers in XDA you dont find on any page

Help bad flash

Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar

Reboot loop on logo screen

Hi,
I search a response a lot but nothing.
I try tu update my htc dream/g1 phone and now he is doing loop reboot on screen logo.
I try to go on every menu (menu + power key, home + power key, back + power key, camera + power key) but i can access to these menu.
Do you have a solution or my phone's break for ever.
Thank you
mandrake73 said:
Hi,
I search a response a lot but nothing.
I try tu update my htc dream/g1 phone and now he is doing loop reboot on screen logo.
I try to go on every menu (menu + power key, home + power key, back + power key, camera + power key) but i can access to these menu.
Do you have a solution or my phone's break for ever.
Thank you
Click to expand...
Click to collapse
can you grab an adb lolcat? the boot loop could honestly be due to any number of reasons .. also try to reboot with CALL+MENU+END and then while it starts hold down HOME button ... if you get to recovery then you're not bricked
I can't connect to adb shell (i start my phone and try to list device with adb: i see nothing)
And start with CALL+MENU+END doesn't work (continu to reboot)
Thanks for your answer.
If you have other solution ...
I try to start my phone with trackball hold down and power button and it get me a black screen and the phone led is BLUE.
Can it help me?
I have the same problem. The phone is totally original. It started yesterday when, for an unknown reason, the com.android.phone not responding started to popup.
Now the phone seems to be in a eternal loop on the HTC boot screen with the annoying chime.
I can get into the fastboot mode, but the phone is not in debugging mode...
At least the phone is still under warranty.
If you can get into fastboot or recovery you dont need debugging on
I fixed the problem by doing a hard reset. I lost everything, but at least the phone is working as new.
Backup. Backup. Backup.
And yes, 3 identical copies in 3 places isn't unheard of.
Concerning my contact, I though they where sync automatically to my google contacts, but it wasn't the case.
What are the best backup apps for android?
MyBackUp Pro, BackUp for root users (this ones free)
NANDROID!
hey
how have u done hard reset?
i try everything , nothing worked!!
sorry for my enghlish....
Yes I did. It solve the problem, but I lost everything that wasn't backup.
wavesecure is good it backs up sms contacts and pictures and call logs i think it also helps you when your phone is lost its in beta but still works
is not working
how do u reset the phone if not responding to any key combination
Here you go
http : // tinyurl.com/ycp8yfw
Nandroid ftw!
time out so ur tellin us u kan get into the recovery????

Please help me out.

Once i used task29 i cannot get my phone to enter the boot loader menu
nevermind. please delete
immson said:
Once i used task29 i cannot get my phone to enter the boot loader menu
Click to expand...
Click to collapse
Just in case anyone else has this problem... After u use the "Task 29" your fone will restart on its own, yet it will not go past the first screen. U must take the back off, hold the volume down key and stick the stylus into the "reset" key on the right side of the device. It will go directly to the bootloader screen. From there it will notice the USB connection and you can then install your new ROM.

Categories

Resources