hi buddys, i loaded wrong boot loader in my touch diamond.(http://forum.ppcgeeks.com/showthread.php?t=35839 it was there).after that, phone didnt open . power button, charge sign, hard reset dosnt operate..now nothing..how can i load a relocker/default bootloader to switch yours/wrong boot loader back to stock..
Try this
Remove your battery , Then inserted in. Hold Volume down And press Reset button.
Your mobile should go to bootloader(tricolor) screen.
Does it happen ?
Related
My diamond freezes on the startupscreen where you see in the lower left conrner the R, G and D versions in RED.
Can this be fixed?
Yeah I am rite now having the same problem anyone has any suggestions the soft-reset button doesn't work and it is not recognizing my network provider... anyone has any suggestions....
hard reset also doesnt work :-(
Yea since the soft reset button doesn't work I am not sure wht to do it is just stuck up on the startup screen can anyone give any suggestions please.....
if i only could acces the internal storage, put a rom on it, and do a flash with hard reset buttons, then it could be back 2 live but now
Can you get it into bootloader? {Hold Vol. down button while pressing power}
If it will go into bootloader, you can flash from there.
It worked
1. i've put it in bootloader [Hold Vol. down button while pressing power]
2. connected the diamond to my pc with USB-cable
3. Install the original rom
Thx supersanj
Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar
hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .
try a hard rest
Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..
thnx .... i will try it ....
was using my nexus one as i was switched it off removed the sim card from this phone placed it in another phone... left my nexus one on charge and turned it on left the room when i got the vibrate didnt even saw wether it was completly on or not... came back home saw the phone off... tried to turn it on but it wouldnt.... then connected the charger to the phone then turned it on and it shows a X and a unlocked sign at the bottom stays for a while and then the screen gets black and the same thing happens over and over again
Its going in a reboot loop I think.
Try going into the bootloader by pressing the trackball and power button together.
and then enter bootloader and then recovery.
In the recovery select reboot.
Btw do you have a nandroid backup?
I do have a backup lying around somewhere but i'm not sure of that. And i tried that boot loader thing but when i go to that menu as soon as i press the volume - button the phone boots off again
did you try the 3 finger:
pwr/vol-/trkball at same time may take up to 20 seconds to boot into bootloader
or, may need to use fastboot from command terminal and flash new recovery/rom like passimg to go back to stock then upgrade from there
pass image method is in wiki
Try this:
- Press the power button and the trackball together
- Select Bootloader and then Recovery
- Flash a different ROM (Stock\CM\MIUI\or try flashing again your current rom)
- If it doesn't work, flash a new rom AND wipe data and cache
(Q) help!!!!!! reocked the bootloader now problems!!!
#1. in normal booted os the power button works fine as well as down vol button. top wont work but ive replaced the vol cable and that still wont work. its a software issues I think.
#2. in bootloader I can use the vol down and it move the way the up should I go to use the vol up and it wont move. I use the power and it wont select anything. cant reunlock the bootloader.
im wondering if I can some how get it unlocked without the buttons. as I can get into fastboot and pc will flash the unlock.bin.
or 2 can I flash something to get the buttons to work right in fastboot.
what do you guys think is wrong???
is it a board issue?
I don't understand how it would work correctly booted normaly but as soon as I try to enter bootloader it wont work.
bootloader is not frozen as like I said I can move with the vol down button but cant select. with power but power works fine in android. thanks in advance!!!!!!!!!!!!!
try to disassembly the phone its to simple ,head up to youtube and search htc first disassembly and after you have opened your phone ,remove the volume keys flex cable and clean the dust if it has and re-insert the flex cable at her place and power up your phone to bootloader to see if it works