Dear friends,
I was trying to flash my diamond with mtty, where i guess i messed up with commands, I formatted it, then tried to restart with "task 8" then my phone turned off and never on again no matter what i did or key pushed.
Any help will be much appreciated...
me too
but i don't know how to use Jtag recover BL for Diamond
Update ROM by using the BootLoader
Hello there,
even though you can't boot into your OS in the Diamond, there's a way to enter "BootLoader" mode. I'm not sure it works, but you can give it a try.
Here's how:
- Connect the Diamond to your PC
- Enter bootloader mode on your Diamond: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
- Use the ROM Update Utility. If the previous step worked and your connection is working, then with some luck you will be able to Flash the Device with the ROM update utility.
I've tried to find the thread that discussed this with pictures and such but couldn't. You might want to look for similar instructions
Good luck
Shane
JTAG
does anyone managed to JTAG diamond?
Related
Hi everybody
i use a
Orange SPV 3000 cid/sim unlocked
WM 6 NBD 7.3
IPL / SPL 2.26
GSM 02.25.11
OS 5.2.1413 (Build 17913.0.3.0)
Now i tried to go back to the latest German ROM Update provided by ORANGE CH.
(RUU_Prodigy_21611_2161111_010410_OR_CH_GER_Ship.exe)
The Update Process start's on the PC Screen and remains on 0% and will terminate with ERROR [260]: UPDATE ERROR
The Phone hangs and cannot enter in "3 color update mode".
I have to take out and reinsert the battery to bring the Wizard back to Work.
Then the Wizard start's up and you can work without any Problems. (Exept you have to set the Date / Time again it is set to 2006-02-14 12:00)
Next Steps
- did a Reboot on the PC and the Wizard -> Same Result
- tried to Flash NBD 7.3 ROM again -> Same Result
- did a Hard Reset (press the 3 Buttons on Reset then Send Button ) and tried to Flash again -> Same Result
- tried to manualy enter Update mode (press Camera Button on Reset) with the same Result the "3 color update mode" will not appear
Has anybody a Idea what else i can do?
Tnx in advance for any HELP
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
mdajunkie said:
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
Click to expand...
Click to collapse
dear mdajunkie
now i can enter bootloader mode manually
looks like i did not hold the camera button long enough before
thank you very mutch for your HELP
I assume the Problem is locatet on the PC and have to find out why i can't flash my Device again.
Recently i changed something on the PC - I installed a external BlueTooth-Dongle from MSI including the MSI BlueTooth Software
Starting now with the easyest step - reinstalling Active Sync 4.5 and try again.
Regards
Now everything works fine
I tried to Flash a ROM and it work's
i did not change anything exept entering the bootloader mode manually once.(no reinstall activesync or deinstall bt software !)
May be entering the Bootloader Mode manualy "cured" my PDA?
i don't know
Regard's
im glad you got it to work. Most important thing is to read make sure you know how to and are confident enough flash roms. Makes things a whole lot easier. Atleast that way if something goes wrong you will be able to backtrack a lot easier and maybe explain your situation a whole lot better. Hope everything else goes wonderful for you and have fun man.
Please,help me as soon as possible -about get out a boot mode.
Situation-i was trying to flash one of Radios from that tread (as always),my Xperia is Hard-Spl,i was renamed downloaded file to Kovsimg.nbh, copy that to the root of MicroSD card,then turn Xperia in bootload mode (4 color bars) (you know-vol. button and on simultan),the file was recognized,i got the message (as always) "press power button to flash ROM or action button to cancel",i pressed power button, flashing begann and was already on 100%, but then was coming an Error message-"Flash not complete and some about RSA too".I take akku out and put in again,and now-don't matte how i turn Xperia ON,it always go to Bootload mode and want to flash that file (and it will not flashed).How i can get out now of that bootload mode???????I read "press Action button to cancel flashing",but what is that Action Button???And if i even take out MicroSD,Xperia start always in bootload and want to flash something!!!!I sit down in Hotel now,i don't have a MicroSD cardreader to copy on MicroSD another file,and i can't use my telephone,because it start always in that 4 color bootload mode and want to flash something!!!
Ple-e-e-a-a-se Help!!!! I don't want to hard reset my telephone now,i just want to start Xperia in normal mode.
Many many thanks in advance,
Valery
P.S.Sorry for my English-it's not good and now especially i'm totally nervous with that problem...
Action button is the middle of the optical joypad.
to reflash connect from your computer with a USB cable and use the Custom Radio RUU
AND DO NOT GO AROUND FLASHING THINGS UNLESS YOU KNOW WHAT YOU ARE DOING!
Thanks a lot for fast response!!!
I was flashing one of the Radio ROMs here in the thread,that was in the list as worked, maybe it was transfer failure to MicroSD card,now it don't matter.
I power now Xperia on, then see that 4-color screen,then now i see kovsimg.nbh- RADIO and "Press power button to start update image" and "Press action button to cancel update image". If i press the middle of optical joystick-as you said-then it happens nothing-i see the same screen...What schould i do????
This is the "n" time I write this:
Remove and reinsert battery
Turn phone on
Now you are out of bootloader
Thank you Gtrab for answer,
but it is what i mean and what is strange-i remove battery,reinsert it,push only On button,and i'm again in boot mode....Very strange,yes???
ValVK said:
Thank you Gtrab for answer,
but it is what i mean and what is strange-i remove battery,reinsert it,push only On button,and i'm again in boot mode....Very strange,yes???
Click to expand...
Click to collapse
Strange for you, but well known phenomena: your flash didn't complete
You'll have to flash again from a PC or by copying a new radio file to your microSD card, or you can use "mtty"... sorry there's no other way but reaching a PC
I have notebook here,but i can't connect to my phone,because it start always in boot mode.Is here some method to connect to phone without Active synch in that bootloader mode???I understand now-i must copy right file on my MicroSD card,how i can do it wothout MicroSD Cardreader and only with a phone starting in boot mode???
Thank you,
Valery
ValVK said:
Is here some method to connect to phone without Active synch in that bootloader mode???I understand now-i must copy right file on my MicroSD card,how i can do it wothout MicroSD Cardreader and only with a phone starting in boot mode???
Click to expand...
Click to collapse
you can't access the sd-card without a Cardreader but you dont have to. In the 4-color screen you should see the text "USB" when you connect the phone to the pc (as far as I remember, when the device is not connected to the pc instad of "USB" the text is "SERIAL"). In that mode you can use the RUU to update your device.
Mastermarv,
thank you very much!!!I was worked for me-i was using RUU Radio utilities in bootloader mode and flashed orig. Radio ROM-now it all started OK and all work again!!!!!Uf-f-f,so one "abenteuer"...
Thank you all the people,those tried to help me in this situation,much appreciated your help!!!!
Now i can some relax...
Valery
ValVK said:
Please,help me as soon as possible -about get out a boot mode.
Situation-i was trying to flash one of Radios from that tread (as always),my Xperia is Hard-Spl,i was renamed downloaded file to Kovsimg.nbh, copy that to the root of MicroSD card,then turn Xperia in bootload mode (4 color bars) (you know-vol. button and on simultan),the file was recognized,i got the message (as always) "press power button to flash ROM or action button to cancel",i pressed power button, flashing begann and was already on 100%, but then was coming an Error message-"Flash not complete and some about RSA too".I take akku out and put in again,and now-don't matte how i turn Xperia ON,it always go to Bootload mode and want to flash that file (and it will not flashed).How i can get out now of that bootload mode???????I read "press Action button to cancel flashing",but what is that Action Button???And if i even take out MicroSD,Xperia start always in bootload and want to flash something!!!!I sit down in Hotel now,i don't have a MicroSD cardreader to copy on MicroSD another file,and i can't use my telephone,because it start always in that 4 color bootload mode and want to flash something!!!
Ple-e-e-a-a-se Help!!!! I don't want to hard reset my telephone now,i just want to start Xperia in normal mode.
Many many thanks in advance,
Valery
P.S.Sorry for my English-it's not good and now especially i'm totally nervous with that problem...
Click to expand...
Click to collapse
I have the same problem! i can't even connect it to my pc cuz it doesn't recognize the phone... it's been stuck at the white " KOVSIMG.nbh - OS - Update in progress...." screen for more than 10 mins now. but it's 100%. I tried hard & soft reset, taking out the battery, and powering it on again , but it still goes back to this screen. please help me... thanks in advance
Hi guys,
Today my D2 decided not to work at all when switching "ON" the screen stays at the windows mobile welcome screen and refuses to continue "Freeze".
I tried soft and hard rests without success...
Anybody can help please?!!!....
Doesn't sound good.
The next thing I would try is to take the battery out for about 30 minutes, then try again with battery replaced. I had a weird issue with an old PDA where on ocassion it would refuse to turn on, and the only fix was to leave out the battery for at least 15 minutes.
Good luck
Hi, though your question has nothing to do with any kind of development, , maybe you should be posting in general section, this is a wild guess, the answer to your question is easy, enter bootloader and flash the oficial rom suited for your device.
If this doesn´t work send it to your distributor.
Cheers.
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
dm03 shm3h said:
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
Click to expand...
Click to collapse
Should i know???
By pressing volume down + the red soft reset button will take you to the bootloader.
The Topaz is yours, what language is it??
Maybe this post will help you:
http://forum.xda-developers.com/showthread.php?t=507232
I went to the bootloader by pressing volume down + ON/OFF button. However, at the bottom of the screen it says (Serial)...
My Topaz language or original ROM is (RUU_Topaz_HTC_WWE_1.39.405.2_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship).
volume down + the red soft reset button will take you to the bootloader.
Download the rom and flash it in bootloader, (tricolour screen).
Sorry but i can´t make it easier.
ark666,
I already went to the bootloader (tricolour screen) and I have a copy of the rom (at my desktop). The point here (correct me if I'm wrong) to flash it in the bootloader by doing these:
1- Go to bootloader....
2- Connect D2 to my PC through USB cable...
3- Then run the downloaded ROM...
Sorry but I'm still new to PPC....
Flashed the origial ROM and problem solved.
THX
My diamond freezes on the startupscreen where you see in the lower left conrner the R, G and D versions in RED.
Can this be fixed?
Yeah I am rite now having the same problem anyone has any suggestions the soft-reset button doesn't work and it is not recognizing my network provider... anyone has any suggestions....
hard reset also doesnt work :-(
Yea since the soft reset button doesn't work I am not sure wht to do it is just stuck up on the startup screen can anyone give any suggestions please.....
if i only could acces the internal storage, put a rom on it, and do a flash with hard reset buttons, then it could be back 2 live but now
Can you get it into bootloader? {Hold Vol. down button while pressing power}
If it will go into bootloader, you can flash from there.
It worked
1. i've put it in bootloader [Hold Vol. down button while pressing power]
2. connected the diamond to my pc with USB-cable
3. Install the original rom
Thx supersanj
Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar