Database Develop

USB NOT WORKING

OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !

Reset, enter bootloader, reflash

how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?

DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...

i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?

DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader

just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C

HELP!!! Cannot enter 3 color Update mode any more !!!

Hi everybody
i use a
Orange SPV 3000 cid/sim unlocked
WM 6 NBD 7.3
IPL / SPL 2.26
GSM 02.25.11
OS 5.2.1413 (Build 17913.0.3.0)
Now i tried to go back to the latest German ROM Update provided by ORANGE CH.
(RUU_Prodigy_21611_2161111_010410_OR_CH_GER_Ship.exe)
The Update Process start's on the PC Screen and remains on 0% and will terminate with ERROR [260]: UPDATE ERROR
The Phone hangs and cannot enter in "3 color update mode".
I have to take out and reinsert the battery to bring the Wizard back to Work.
Then the Wizard start's up and you can work without any Problems. (Exept you have to set the Date / Time again it is set to 2006-02-14 12:00)
Next Steps
- did a Reboot on the PC and the Wizard -> Same Result
- tried to Flash NBD 7.3 ROM again -> Same Result
- did a Hard Reset (press the 3 Buttons on Reset then Send Button ) and tried to Flash again -> Same Result
- tried to manualy enter Update mode (press Camera Button on Reset) with the same Result the "3 color update mode" will not appear
Has anybody a Idea what else i can do?
Tnx in advance for any HELP

when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.

mdajunkie said:
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
Click to expand...
Click to collapse
dear mdajunkie
now i can enter bootloader mode manually
looks like i did not hold the camera button long enough before
thank you very mutch for your HELP
I assume the Problem is locatet on the PC and have to find out why i can't flash my Device again.
Recently i changed something on the PC - I installed a external BlueTooth-Dongle from MSI including the MSI BlueTooth Software
Starting now with the easyest step - reinstalling Active Sync 4.5 and try again.
Regards

Now everything works fine
I tried to Flash a ROM and it work's
i did not change anything exept entering the bootloader mode manually once.(no reinstall activesync or deinstall bt software !)
May be entering the Bootloader Mode manualy "cured" my PDA?
i don't know
Regard's

im glad you got it to work. Most important thing is to read make sure you know how to and are confident enough flash roms. Makes things a whole lot easier. Atleast that way if something goes wrong you will be able to backtrack a lot easier and maybe explain your situation a whole lot better. Hope everything else goes wonderful for you and have fun man.

My Herald died during ROM upgrade

Who can help me, ..... please.
During the upgrade of my Herald the process stopped around 3%. I only could exit the application but my Herald doesn't boot anymore. Who knows how i can get my device working again.
Thanks upfront

jeijt said:
Who can help me, ..... please.
I only could exit the application but my Herald doesn't boot anymore. Who knows how i can get my device working again.
Click to expand...
Click to collapse
Do you get it to boot into the bootloader?
(* Press and hold the camera key, then press the soft reset button. *)
If so, you can try to use it and apply the original firmware.

Monarch73 said:
Do you get it to boot into the bootloader?
(* Press and hold the camera key, then press the soft reset button. *)
If so, you can try to use it and apply the original firmware.
Click to expand...
Click to collapse
It seems I get into bootloader 4 bars (red, green, blue and white)
Red: IPL 1.01.0001
SPL 1.01.0001
If I attach a USB kabel it says USB in the white bar
But where can I find de original firmware an how can I get it on the system.

i saw your other two threads about flashing from sd.
heres the thing. you need to use the RUU for your device. It depends on who you purchased your device from. If you have an HTC branded device, you will need the appropriate RUU etc etc...
heres the link. make sure you choose the right one.
http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades

Vol Down+Power Buttons are not working when trying to flash!!!

Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!

isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!

agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???

try to hard reset first... then try to charge the new ROM.

wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be

poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?

isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try

wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!

HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes

maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again

to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.

Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...

hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks

human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally

i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!

One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it

isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.

help me cant enter bootloader

i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please

dlegendkiller said:
i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please
Click to expand...
Click to collapse
2. Make sure X1 is off
3.-4. You can skip this if X1 is really off
5. Press on the "down volume" (the button you press to decrease volume level) and DO NOT LET GO
6. WHILE STILL PRESSING the volume down key, press the power button AND DO NOT LET GO OF BOTH KEYS until the tricolor screen appears

it still doesnt work sir,
pinoy here
are there requirements in entering bootloader?

please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?

If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method

harveydent said:
If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method
Click to expand...
Click to collapse
but in this case it think it's very important to say that it's only that simple if he want's to flash a stock-rom!!!
(meaning "an original rom by SE")
@dlegendkiller:
if you ever want to flash a custom-rom then first read about flashing hard-spl and then do it before flashing custom-roms. if not, you can get into serious trouble. (it's easy and save if you follow the instructions)

dlegendkiller said:
please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?
Click to expand...
Click to collapse
honestly, i think you're either doing something wrong here OR your volume-button is broken. regardless of your sd-card you should be able to enter bootloader-mode (the tri-color screen).
are you really doing it this way? to test do it without the usb-cable attached:
- turn your phone off completely
- press your volume-down-button and keep pressing it
- now press the power-button and also keep pressing it
you'll know when to release the buttons yourself.

anyway, can i get some advantages in updating my rom? i really am scared to install custom roms, i might break the phone
and i want to install manila hd, i am wondering why i cant install it
its about "system permissions etc etc"
does it require custom rom?