Database Develop

Radio rom corrupted, no active sync, can be fixed?

Somehow my radio rom got corrupted, and I can't flash it back with awizard tools. Is thee any other way of fixing this without going to the shop? which I'll actually will wednesday but can't right now.
Since the radio rom is corrupted there are no phone nore active sync functions so restoring with the flash tool won't help much too... need a creative solution now

start it up in the rgb mode and you can load a new rom. I just had the same issue.

In fact I can't, getting an error 260: update error.
No clue to what to do.

iruja said:
In fact I can't, getting an error 260: update error.
No clue to what to do.
Click to expand...
Click to collapse
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp

reejmond said:
iruja said:
In fact I can't, getting an error 260: update error.
No clue to what to do.
Click to expand...
Click to collapse
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp
Click to expand...
Click to collapse
That's exactly what I did, but I still get the 260 error, they even tried this in the store.
Going back there monday for warranty as they take it back, didn't have my warranty paper with me last time.

reejmond said:
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp
Click to expand...
Click to collapse
Thank you. My name is Lucky from Ghana. Your solution worked for my SPV M3100 (TyTN) God Bless You.

Vol Down+Power Buttons are not working when trying to flash!!!

Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!

isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!

agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???

try to hard reset first... then try to charge the new ROM.

wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be

poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?

isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try

wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!

HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes

maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again

to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.

Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...

hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks

human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally

i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!

One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it

isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.

Need Experts To Solve This One....

Hi guys,
Today my D2 decided not to work at all when switching "ON" the screen stays at the windows mobile welcome screen and refuses to continue "Freeze".
I tried soft and hard rests without success...
Anybody can help please?!!!....

Doesn't sound good.
The next thing I would try is to take the battery out for about 30 minutes, then try again with battery replaced. I had a weird issue with an old PDA where on ocassion it would refuse to turn on, and the only fix was to leave out the battery for at least 15 minutes.
Good luck

Hi, though your question has nothing to do with any kind of development, , maybe you should be posting in general section, this is a wild guess, the answer to your question is easy, enter bootloader and flash the oficial rom suited for your device.
If this doesn´t work send it to your distributor.
Cheers.

ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?

dm03 shm3h said:
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
Click to expand...
Click to collapse
Should i know???
By pressing volume down + the red soft reset button will take you to the bootloader.
The Topaz is yours, what language is it??
Maybe this post will help you:
http://forum.xda-developers.com/showthread.php?t=507232

I went to the bootloader by pressing volume down + ON/OFF button. However, at the bottom of the screen it says (Serial)...
My Topaz language or original ROM is (RUU_Topaz_HTC_WWE_1.39.405.2_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship).

volume down + the red soft reset button will take you to the bootloader.
Download the rom and flash it in bootloader, (tricolour screen).
Sorry but i can´t make it easier.

ark666,
I already went to the bootloader (tricolour screen) and I have a copy of the rom (at my desktop). The point here (correct me if I'm wrong) to flash it in the bootloader by doing these:
1- Go to bootloader....
2- Connect D2 to my PC through USB cable...
3- Then run the downloaded ROM...
Sorry but I'm still new to PPC....

Flashed the origial ROM and problem solved.
THX

help me cant enter bootloader

i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please

dlegendkiller said:
i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please
Click to expand...
Click to collapse
2. Make sure X1 is off
3.-4. You can skip this if X1 is really off
5. Press on the "down volume" (the button you press to decrease volume level) and DO NOT LET GO
6. WHILE STILL PRESSING the volume down key, press the power button AND DO NOT LET GO OF BOTH KEYS until the tricolor screen appears

it still doesnt work sir,
pinoy here
are there requirements in entering bootloader?

please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?

If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method

harveydent said:
If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method
Click to expand...
Click to collapse
but in this case it think it's very important to say that it's only that simple if he want's to flash a stock-rom!!!
(meaning "an original rom by SE")
@dlegendkiller:
if you ever want to flash a custom-rom then first read about flashing hard-spl and then do it before flashing custom-roms. if not, you can get into serious trouble. (it's easy and save if you follow the instructions)

dlegendkiller said:
please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?
Click to expand...
Click to collapse
honestly, i think you're either doing something wrong here OR your volume-button is broken. regardless of your sd-card you should be able to enter bootloader-mode (the tri-color screen).
are you really doing it this way? to test do it without the usb-cable attached:
- turn your phone off completely
- press your volume-down-button and keep pressing it
- now press the power-button and also keep pressing it
you'll know when to release the buttons yourself.

anyway, can i get some advantages in updating my rom? i really am scared to install custom roms, i might break the phone
and i want to install manila hd, i am wondering why i cant install it
its about "system permissions etc etc"
does it require custom rom?

ROM Update issue

I tried to do a TASK29 and somehow in the folder there was no task29.exe, so i used the ROMUpdate utility ..and asked me if i wanted to upgrade to somewhat ROM 2.0.0 (?something?)..(i thought that was part of task29 job...) and now my device is blocked in HTC white splash screen...
hard reset still same issue does...
is there any ROM Update utility that can be used without starting the windows from the phone?
or..what can i do to connect my phone to the PC?
i managed to do 4-5 ROM Updates without problems during time, but somehow..this TASK29 job did not work.
is it possible that i deleted the Operating system from the phone?

bogdan_wrc said:
I tried to do a TASK29 and somehow in the folder there was no task29.exe, so i used the ROMUpdate utility ..and asked me if i wanted to upgrade to somewhat ROM 2.0.0 (?something?)..(i thought that was part of task29 job...) and now my device is blocked in HTC white splash screen...
hard reset still same issue does...
is there any ROM Update utility that can be used without starting the windows from the phone?
or..what can i do to connect my phone to the PC?
i managed to do 4-5 ROM Updates without problems during time, but somehow..this TASK29 job did not work.
is it possible that i deleted the Operating system from the phone?[/QUOTE
If am not mistaken, Task 29 did exactly what it should do which is wipe your device clean. Now what you have to do is enter bootloader by powering on your phone while holding the volume down button. If your phone is not off, do a soft reset by pressing the reset button on the side while holding down the volume down button. You should come to a tricolor screen and it will say "SERIAL" in the bottom. When you see this, plug in your USB and on the screen it should change from "SERIAL" to "USB". At this point open up your rom folder, click on the "Rom Update Utility" and follow the prompts and you should be all set. Hope it helps.
Click to expand...
Click to collapse

sorry. solution found
"if you fail to press vol down key and your phone get stuck on the white screen, just remove your battery, then try again: press power, and keep vol down pressed immediatly next, until the phone get to RVB bootloader.
When your phone is back to RVB bootloader screen, use the leocustomruu.exe provided with your favorite rom package to flash a new rom, or flash it from memory card using standard procedure."
you can close this thread.

marduk79 said:
bogdan_wrc said:
I tried to do a TASK29 and somehow in the folder there was no task29.exe, so i used the ROMUpdate utility ..and asked me if i wanted to upgrade to somewhat ROM 2.0.0 (?something?)..(i thought that was part of task29 job...) and now my device is blocked in HTC white splash screen...
hard reset still same issue does...
is there any ROM Update utility that can be used without starting the windows from the phone?
or..what can i do to connect my phone to the PC?
i managed to do 4-5 ROM Updates without problems during time, but somehow..this TASK29 job did not work.
is it possible that i deleted the Operating system from the phone?[/QUOTE
If am not mistaken, Task 29 did exactly what it should do which is wipe your device clean. Now what you have to do is enter bootloader by powering on your phone while holding the volume down button. If your phone is not off, do a soft reset by pressing the reset button on the side while holding down the volume down button. You should come to a tricolor screen and it will say "SERIAL" in the bottom. When you see this, plug in your USB and on the screen it should change from "SERIAL" to "USB". At this point open up your rom folder, click on the "Rom Update Utility" and follow the prompts and you should be all set. Hope it helps.
Click to expand...
Click to collapse
thank you. it did help
i re-red the post related tot task 29 and found the solution.
Click to expand...
Click to collapse