i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please
dlegendkiller said:
i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please
Click to expand...
Click to collapse
2. Make sure X1 is off
3.-4. You can skip this if X1 is really off
5. Press on the "down volume" (the button you press to decrease volume level) and DO NOT LET GO
6. WHILE STILL PRESSING the volume down key, press the power button AND DO NOT LET GO OF BOTH KEYS until the tricolor screen appears
it still doesnt work sir,
pinoy here
are there requirements in entering bootloader?
please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?
If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method
harveydent said:
If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method
Click to expand...
Click to collapse
but in this case it think it's very important to say that it's only that simple if he want's to flash a stock-rom!!!
(meaning "an original rom by SE")
@dlegendkiller:
if you ever want to flash a custom-rom then first read about flashing hard-spl and then do it before flashing custom-roms. if not, you can get into serious trouble. (it's easy and save if you follow the instructions)
dlegendkiller said:
please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?
Click to expand...
Click to collapse
honestly, i think you're either doing something wrong here OR your volume-button is broken. regardless of your sd-card you should be able to enter bootloader-mode (the tri-color screen).
are you really doing it this way? to test do it without the usb-cable attached:
- turn your phone off completely
- press your volume-down-button and keep pressing it
- now press the power-button and also keep pressing it
you'll know when to release the buttons yourself.
anyway, can i get some advantages in updating my rom? i really am scared to install custom roms, i might break the phone
and i want to install manila hd, i am wondering why i cant install it
its about "system permissions etc etc"
does it require custom rom?
Related
Please help I cant get my xperia into bootloader.
I've tried volume down and power technique, but to no avail.
Any suggestions? as I'm fed up of this damn o2 ROM.
Thankyou
did you turn-off your phone first?
again, turn-off the phone,
press and hold the down sound button,
press and hold the power button until the multi-color screen appear.
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
You must to press for long time,Until Tree-color screen to appear..
hirst89 said:
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
Click to expand...
Click to collapse
I dont know if theres other way to enter bootloader mode in x1...
try to search...
or maybe you can try hardspl again.
try two thinks please:
ONE:
turn of your pda by holding long time power on/off until a message comes and ask you "turning of?" (i write the short version).
than try bootlader-modus by 1. press volume down and hold 2. press power on/off and hold.
dont shocking by vibration - hold both buttons until bootloader comes.
TWO:
your pda is quite normal?
than you dont need make finger-gym. open X1_HardSPL.exe and wait two or three seconds. it extracts some files. one of this is "EnterBootloader.exe"
copy this with usb/activesync or flashcard to root of your pda. go with fileexplorer (pda) to root and klicki-micki and you straight fly to bootloader-mode.
okokur said:
your pda is quite normal?
than you dont need make finger-gym.
Click to expand...
Click to collapse
Love it!
But yes, make sure you done hardspl first. then power off phone then hold volume down and power do not let go of buttons until multicolour screen appears.
Tin.
TBH you don't need to hardspl to get to the tri-color bootscreen, just to flash with custom roms.
And if nothing works, remove and reinsert the battery then hold power+volume-down key until it vibrates and let them go when the screen shows up.
try taking the battery out first, then putting the battery back in. make sure that the phone is NOT connected via usb cable, or else it will automatically turn back on.
then use the power and lower volume key to enter bootloader mode.
Hello,
Have of course searched 1st but could only find old solutions for older type phones.
During flashing of a rom the power fell out but I did not notice because its daytime After a while me laptop give out during the flashingprocess.
the result: stuck on the tricolorscreen. it says: romload process failed.
have tried to flash again, to hard reboot but does not work.
PLEASE help me out here....
cheers, flummie
Start the phone pressing the down volume key and you will get to bootloader. After that you can flash again
probably he also needs to put the .nbh file of the rom in the sdcard so he can flash directly.
no, does not work because you cant connect through activesync first..
would this work: use the methode of flashing through the flashcard? If i use an other phone the put the rom on the flashcard, then put it back in blackcome and flash????
miri said:
Start the phone pressing the down volume key and you will get to bootloader. After that you can flash again
Click to expand...
Click to collapse
[email protected]: yep, had the same thought going to try. thx
[email protected] said:
probably he also needs to put the .nbh file of the rom in the sdcard so he can flash directly.
Click to expand...
Click to collapse
Don't have to worry about ActiveSync - just put in bootloader mode (Power Button + Volume Down) and start BlackstoneCustomRUU.exe.
flummie said:
no, does not work because you cant connect through activesync first..
would this work: use the methode of flashing through the flashcard? If i use an other phone the put the rom on the flashcard, then put it back in blackcome and flash????
Click to expand...
Click to collapse
yep should work, rename the firmware to BLACIMG.NBH otherwise it will come up with missing rom. stick in the hd and hold down and then press the power button for a fraction of a second then follow the onscreen instructions.
if you get rom not found make sure BLACIMG.NBH is exact inc caps. but its a lot faster flashing this way anyway.
sirec said:
yep should work, rename the firmware to BLACIMG.NBH otherwise it will come up with missing rom. stick in the hd and hold down and then press the power button for a fraction of a second then follow the onscreen instructions.
if you get rom not found make sure BLACIMG.NBH is exact inc caps. but its a lot faster flashing this way anyway.
Click to expand...
Click to collapse
can flash from usb too from here as i done it before. just plugin til it says usb on the phone and then load the BlackstoneRUUWrapper.exe , wont detect teh existing rom but it will show up blank with the on about to flash underneath. a few seconds and it will start flashing. hope it works for ya, did for me.
hi guys, thx for all your help. got it to work through sdcard flash.
this did not work:
pmcall: "Don't have to worry about ActiveSync - just put in bootloader mode (Power Button + Volume Down) and start BlackstoneCustomRUU.exe."
cheers again
Hi all,
what can i do?
You sure that what you're trying to perform is a hard reset, not a mere soft-reset?
If yes, this is really weird. Try flashing your ROM again.
jasczj said:
Hi all,
what can i do?
Click to expand...
Click to collapse
If you are trying to perform a hard reset and it doesn't work and phone won't reboot, then only other option you have left is to put phone in bootloader and flash stock/cooked rom.
Does phone reboot ok? Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Fallen Spartan said:
If you are trying to perform a hard reset and it doesn't work and phone won't reboot, then only other option you have left is to put phone in bootloader and flash stock/cooked rom.
Does phone reboot ok? Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Click to expand...
Click to collapse
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
jasczj said:
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
Click to expand...
Click to collapse
Have you tried a Hard reset?
As Fallen Spartan wrote : Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
If it doesn't help try to flash a cooked or stock rom but I recommend you to first try the hard reset.
jasczj said:
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
Click to expand...
Click to collapse
Bootloader is the tri-coloured screen you are getting
If you can get phone in bootloader then you can still flash new rom.
First of all try a hard reset by doing the following:
1. Turn phone off
2. Hold down vol up & vol down
3. Continue to do No.2 and turn phone on
4. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Once complete if phone still doesn't reboot you will need to flash new rom by doing the following:
1. Turn phone off
2. Hold vol down button only
3. Continue to do No.2 and turn phone on
4. You will be presented with bootloader screen (tri-colour screen)
5. Connect phone to pc and bottom of screen text should change from 'serial' to 'USB'. If this doesn't read cRaCKwHoRe's guide (see link below) as you may need to update pc drivers.
6. Now flash original stock rom from which you have downloaded from wiki. You can find stock roms here. To flash rom you will need to run ruu file from pc (this is rom you have downloaded)
Make sure you only flash original stock rom which was already on your phone. If you want to flash other roms you will need to follow cRaCKwHoRe's guide
I'd recommend reading the wiki so you understand more about the process and you phone
Good luck and keep us informed
Hi guys,
Today my D2 decided not to work at all when switching "ON" the screen stays at the windows mobile welcome screen and refuses to continue "Freeze".
I tried soft and hard rests without success...
Anybody can help please?!!!....
Doesn't sound good.
The next thing I would try is to take the battery out for about 30 minutes, then try again with battery replaced. I had a weird issue with an old PDA where on ocassion it would refuse to turn on, and the only fix was to leave out the battery for at least 15 minutes.
Good luck
Hi, though your question has nothing to do with any kind of development, , maybe you should be posting in general section, this is a wild guess, the answer to your question is easy, enter bootloader and flash the oficial rom suited for your device.
If this doesn´t work send it to your distributor.
Cheers.
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
dm03 shm3h said:
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
Click to expand...
Click to collapse
Should i know???
By pressing volume down + the red soft reset button will take you to the bootloader.
The Topaz is yours, what language is it??
Maybe this post will help you:
http://forum.xda-developers.com/showthread.php?t=507232
I went to the bootloader by pressing volume down + ON/OFF button. However, at the bottom of the screen it says (Serial)...
My Topaz language or original ROM is (RUU_Topaz_HTC_WWE_1.39.405.2_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship).
volume down + the red soft reset button will take you to the bootloader.
Download the rom and flash it in bootloader, (tricolour screen).
Sorry but i can´t make it easier.
ark666,
I already went to the bootloader (tricolour screen) and I have a copy of the rom (at my desktop). The point here (correct me if I'm wrong) to flash it in the bootloader by doing these:
1- Go to bootloader....
2- Connect D2 to my PC through USB cable...
3- Then run the downloaded ROM...
Sorry but I'm still new to PPC....
Flashed the origial ROM and problem solved.
THX
When I wake up the phone.It's show the HTC logo and it was like force connect to PC.But when I connected it was show error code in zune c101002e
I can't hard reset and flash ROM this phone because it's wasn't show the three color page!!
Whats your last operation before this error appears on your Phone?
How do you try to Hard Reset your Phone?
Is this the Original SD Card? you have changed SD-Card?
Whats your last operation before this error appears on your Phone? >>> 7.8 PPJD Custom ROM
How do you try to Hard Reset your Phone? >>> Can't hard reset.I try to press and hold the Volume Up and Volume Down buttons and press the Power button.But it have the same effect
Is this the Original SD Card? you have changed SD-Card? >>> Original SD Card
Restore it
With the gold card method go back to any rom with a Bootloader below v5.
remember this before flashing a custom rom
1st: battery over 50%...
2nd: Cotulla's RSPL
3rd: Deepshinig Rom for your convenience.
Look my signature.
faustolg said:
With the gold card method go back to any rom with a Bootloader below v5.
remember this before flashing a custom rom
1st: battery over 50%...
2nd: Cotulla's RSPL
3rd: Deepshinig Rom for your convenience.
Look my signature.
Click to expand...
Click to collapse
I'm now facing the same problem, so if I want to restore the rom and bootloder by using Deepshinig Rom, what's the step to do?
1. My battery is full.
2. Mine is Cotulla's RSPL
3. How to recover rom with a Bootloader ?Is there any link regarding to it.
Thanks in advance.:good:
What?
kaotomut said:
I'm now facing the same problem, so if I want to restore the rom and bootloder by using Deepshinig Rom, what's the step to do?
1. My battery is full.
2. Mine is Cotulla's RSPL
3. How to recover rom with a Bootloader ?Is there any link regarding to it.
Thanks in advance.:good:
Click to expand...
Click to collapse
then just install Deepshining with the ROMUpdateUtility.exe and be done with it... you'll have Deepshining in less than 5 minutes...
faustolg said:
then just install Deepshining with the ROMUpdateUtility.exe and be done with it... you'll have Deepshining in less than 5 minutes...
Click to expand...
Click to collapse
We can't do that because we can't enter "Tri-coloured mode" by pressing vol down then turn power on ,just "USB host mode available" by pressing vol down + camera then turn power on.
Any ideas or advices?
Anyway thanks for replying,we're so appreciate it. :good:
kaotomut said:
We can't do that because we can't enter "Tri-coloured mode" by pressing vol down then turn power on ,just "USB host mode available" by pressing vol down + camera then turn power on.
Any ideas or advices?
Anyway thanks for replying,we're so appreciate it. :good:
Click to expand...
Click to collapse
When you use the goldcard method you put the device into USB host mode, not bootloader mode.
To enter USB host mode - Power off the device - Press and hold down the Volume down + Volume up + Camera buttons together and power on the device, this will bring the device into USB host mode and the screen will show, "Enter USB Host Mode...."
Just follow the goldcard tutorial here -
http://forum.xda-developers.com/showthread.php?t=1597837
xdrc45 said:
When you use the goldcard method you put the device into USB host mode, not bootloader mode.
To enter USB host mode - Power off the device - Press and hold down the Volume down + Volume up + Camera buttons together and power on the device, this will bring the device into USB host mode and the screen will show, "Enter USB Host Mode...."
Just follow the goldcard tutorial here -
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
Wow!!Thanks a lot. I'll try today, I need to prepare lots stuff. especially no do rom
I'll report the result as soon as possible.
:laugh:
To xdrc45
I love you guy. You have brought back my phone from death. By following your guide and your link. My phone boots perfectly now.
Thanks a million times from the bottom of my heart.
kaotomut said:
Wow!!Thanks a lot. I'll try today, I need to prepare lots stuff. especially no do rom
I'll report the result as soon as possible.
:laugh:
To xdrc45
I love you guy. You have brought back my phone from death. By following your guide and your link. My phone boots perfectly now.
Thanks a million times from the bottom of my heart.
Click to expand...
Click to collapse
You're very welcome... I'm glad I could help!
I'm happy for you that your device is working again, enjoy!!
You can use the goldcard method to downgrade the devices SPL, install XSPL and then flash a custom rom too if you want.
Take a look at Shadow's tutorial -
http://forum.xda-developers.com/showthread.php?t=1295068
xdrc45 said:
You're very welcome... I'm glad I could help!
I'm happy for you that your device is working again, enjoy!!
You can use the goldcard method to downgrade the devices SPL, install XSPL and then flash a custom rom too if you want.
Take a look at Shadow's tutorial -
http://forum.xda-developers.com/showthread.php?t=1295068
Click to expand...
Click to collapse
Thanks again,bro.
I'm now using Custom Rom - Deepshining V7.8 Fully Unlocked too. :good: