Somehow my radio rom got corrupted, and I can't flash it back with awizard tools. Is thee any other way of fixing this without going to the shop? which I'll actually will wednesday but can't right now.
Since the radio rom is corrupted there are no phone nore active sync functions so restoring with the flash tool won't help much too... need a creative solution now
start it up in the rgb mode and you can load a new rom. I just had the same issue.
In fact I can't, getting an error 260: update error.
No clue to what to do.
iruja said:
In fact I can't, getting an error 260: update error.
No clue to what to do.
Click to expand...
Click to collapse
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp
reejmond said:
iruja said:
In fact I can't, getting an error 260: update error.
No clue to what to do.
Click to expand...
Click to collapse
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp
Click to expand...
Click to collapse
That's exactly what I did, but I still get the 260 error, they even tried this in the store.
Going back there monday for warranty as they take it back, didn't have my warranty paper with me last time.
reejmond said:
Enter Bootloader, - hold the "camera" and shortly press the reset button, don't release "camera" until you can see color screen, connect USB cable, and start to flash any ROM you like from ftp
Click to expand...
Click to collapse
Thank you. My name is Lucky from Ghana. Your solution worked for my SPV M3100 (TyTN) God Bless You.
Related
yes, I have a brick...
the phone has crashed after some hours with wm6. the soft reset stop in the wm splash screen and the hard reset the same.
I can't connect it to the pc so I don't know how to downgrade the rom.
I will look in the forum for a solution for bricked wizards...
If anyone has experience or can help...
False alarm... not bricked at all!
Entering in bootloader mode and reflashing it with wm6 works again.
I hope it doesn't happen again. Because wm6 seems much quicker and better than wm5...
Same problem - not fixed yet
Can you tell me how to enter into bootloader mode. I can't get an activesync connection even though the phone will boot all the way through then freeze on the today screen.
todd5433 said:
Can you tell me how to enter into bootloader mode. I can't get an activesync connection even though the phone will boot all the way through then freeze on the today screen.
Click to expand...
Click to collapse
what version of activesync are you using? WM6 requires 4.5 beta 2 as documented loads of times in this forum.
Bootloader mode
todd5433 said:
Can you tell me how to enter into bootloader mode. I can't get an activesync connection even though the phone will boot all the way through then freeze on the today screen.
Click to expand...
Click to collapse
You have to press the camera and voice command buttons and at the same time reset the pda without releasing the buttons. You will enter then.
Regards,
rodalfa said:
You have to press the camera and voice command buttons and at the same time reset the pda without releasing the buttons. You will enter then.
Regards,
Click to expand...
Click to collapse
=====================
Try this from my posts!
http://forum.xda-developers.com/showthread.php?t=283859
Who can help me, ..... please.
During the upgrade of my Herald the process stopped around 3%. I only could exit the application but my Herald doesn't boot anymore. Who knows how i can get my device working again.
Thanks upfront
jeijt said:
Who can help me, ..... please.
I only could exit the application but my Herald doesn't boot anymore. Who knows how i can get my device working again.
Click to expand...
Click to collapse
Do you get it to boot into the bootloader?
(* Press and hold the camera key, then press the soft reset button. *)
If so, you can try to use it and apply the original firmware.
Monarch73 said:
Do you get it to boot into the bootloader?
(* Press and hold the camera key, then press the soft reset button. *)
If so, you can try to use it and apply the original firmware.
Click to expand...
Click to collapse
It seems I get into bootloader 4 bars (red, green, blue and white)
Red: IPL 1.01.0001
SPL 1.01.0001
If I attach a USB kabel it says USB in the white bar
But where can I find de original firmware an how can I get it on the system.
i saw your other two threads about flashing from sd.
heres the thing. you need to use the RUU for your device. It depends on who you purchased your device from. If you have an HTC branded device, you will need the appropriate RUU etc etc...
heres the link. make sure you choose the right one.
http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades
I cooked a rom for my ATT Tilt, after booting up the phone has no audio
Can't even hear through the ear piece when a call has been received.
now I try to load my previous rom, and activesync is giving me an error, remote networking error 1062, so my computer wont recognize the device, tried 4 different computers, same error.
maybe I need to reinstall activesync on my phone? does anyone know where I can download it... found activesync for the PC, but cant find it for the PPC.
thanks in advance..
Stacygirl said:
I cooked a rom for my ATT Tilt, after booting up the phone has no audio
Can't even hear through the ear piece when a call has been received.
now I try to load my previous rom, and activesync is giving me an error, remote networking error 1062, so my computer wont recognize the device, tried 4 different computers, same error.
maybe I need to reinstall activesync on my phone? does anyone know where I can download it... found activesync for the PC, but cant find it for the PPC.
thanks in advance..
Click to expand...
Click to collapse
1. what kitchen are you using?
2. what are you using as your base?
3. what radio are you using?
mbarvian said:
1. what kitchen are you using?
2. what are you using as your base?
3. what radio are you using?
Click to expand...
Click to collapse
Also, did you try putting the phone into bootloader and flashing from there?
scotchua said:
Also, did you try putting the phone into bootloader and flashing from there?
Click to expand...
Click to collapse
I tried putting it in bootloader mode, pressing the power button, camera button, and reset button, but the phone just restarts..
Stacygirl said:
I tried putting it in bootloader mode, pressing the power button, camera button, and reset button, but the phone just restarts..
Click to expand...
Click to collapse
try pushing the camera button ALL THE WAY (sounds stupid, but really push in the camera button) while pushing the stylus in the reset hole
mbarvian said:
try pushing the camera button ALL THE WAY (sounds stupid, but really push in the camera button) while pushing the stylus in the reset hole
Click to expand...
Click to collapse
just tried for 10 minutes, keep getting the message warning me if I really want to power down my device, yes or no
Stacygirl said:
just tried for 10 minutes, keep getting the message warning me if I really want to power down my device, yes or no
Click to expand...
Click to collapse
Don't push the power button down, just hold the camera button all the way down, and soft reset with the stylus.
scotchua said:
Don't push the power button down, just hold the camera button all the way down, and soft reset with the stylus.
Click to expand...
Click to collapse
ok I tried this way, im getting the error message, "error opening the shortcut or locating the target filename"
is there a way to boot a rom from my micro sd slot?
Stacygirl said:
is there a way to boot a rom from my micro sd slot?
Click to expand...
Click to collapse
You can, but you need to be able to get into bootloader. I'm not sure how you are getting the shortcut error when rebooting...it should at the very least just reboot normally.
mbarvian said:
1. what kitchen are you using?
2. what are you using as your base?
3. what radio are you using?
Click to expand...
Click to collapse
the rom u used was ppckitchen kaiser core
anyone know another method of getting into boat loader mode? maybe a boatloader app or something?
Stacygirl said:
anyone know another method of getting into boat loader mode? maybe a boatloader app or something?
Click to expand...
Click to collapse
Try this. Turn the phone off completely, press firmly and hold the camera button, then poke the reset button with the stylus. Do not go near the power button, and do not release the camera button until the bootloader comes up.
got it to work thanks for the assistance
I took the battery out, put it back it while the camera button, pressed the power button, then it went into bootloader mode
once it was in bootloader mode I was able to load the original rom
tested it, and my tilt is back running normal
thanks again, you guys are very helpful
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???
try to hard reset first... then try to charge the new ROM.
wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!
HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes
maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again
to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.
Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally
i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.
Hello,
can anyone help me. My HTC phone m7 just had a count down and then shutdown for it self. It then began to reboot over and over and it never gets pass the HTC logo.
I tried:
1. going into the splash screen, but i reboots even when i do that. It happens so quickly i can't select fastboot, factory reset or anything.
2. Holding it close to a bring light and hard reset.
3. Waiting for 48 hours.
4. leaving the battery to drained and then hard reset.
I can't remove the battery. and when ever i put the phone to charge it keeps rebooting over and over.
keronmat said:
Hello,
can anyone help me. My HTC phone m7 just had a count down and then shutdown for it self. It then began to reboot over and over and it never gets pass the HTC logo.
I tried:
1. going into the splash screen, but i reboots even when i do that. It happens so quickly i can't select fastboot, factory reset or anything.
2. Holding it close to a bring light and hard reset.
3. Waiting for 48 hours.
4. leaving the battery to drained and then hard reset.
I can't remove the battery. and when ever i put the phone to charge it keeps rebooting over and over.
Click to expand...
Click to collapse
First, try holding the power button for few seconds till kapacitive buttons start flashing. If that doesn't help, press power + vol down to get into bootloader, and then post everything written there
donkeykong1 said:
First, try holding the power button for few seconds till kapacitive buttons start flashing. If that doesn't help, press power + vol down to get into bootloader, and then post everything written there
Click to expand...
Click to collapse
I tired pressing the volume+ down button but it goes into the splash screen, where I can choose fastboot or factory reset. But when I get there, the phone reboots before I can select anything.
When I hold the power button. I did this for at lease 2 mins. Nothing happens.
keronmat said:
I tired pressing the volume+ down button but it goes into the splash screen, where I can choose fastboot or factory reset. But when I get there, the phone reboots before I can select anything.
When I hold the power button. I did this for at lease 2 mins. Nothing happens.
Click to expand...
Click to collapse
OK, what does it say on that screen? Under "locked"?
There should be h-boot version and OS version above fastboot and factory reset options. We need that info to try to help you
donkeykong1 said:
OK, what does it say on that screen? Under "locked"?
There should be h-boot version and OS version above fastboot and factory reset options. We need that info to try to help you
Click to expand...
Click to collapse
Hey can you look at the image below. I took a picture of the screen so you can see what it says.
keronmat said:
Hey can you look at the image below. I took a picture of the screen so you can see what it says.
Click to expand...
Click to collapse
https://www.dropbox.com/s/vyd5vudl9...E60_MR_BrightstarUS_WWE_7.17.1540.51.exe?dl=0
Download this .exe to your computer, reboot your phone to bootloader mode, connect it to your computer, and run the .exe. That should fix any software issues
donkeykong1 said:
https://www.dropbox.com/s/vyd5vudl9...E60_MR_BrightstarUS_WWE_7.17.1540.51.exe?dl=0
Download this .exe to your computer, reboot your phone to bootloader mode, connect it to your computer, and run the .exe. That should fix any software issues
Click to expand...
Click to collapse
OK thanks, I will try this later as I am at work now. But would this work even if the phone keeps rebooting? How would the pc drivers connect to the phone?
keronmat said:
OK thanks, I will try this later as I am at work now. But would this work even if the phone keeps rebooting? How would the pc drivers connect to the phone?
Click to expand...
Click to collapse
If it's in bootloader mode it should be fine. In order to run the .exe file your phone must be in bootloader mode. You managed togo into bootloader, so there should be no problem. If that .exe doesn't solve your issue, than it's safe to say it's a hardware issue
Hey thanks a lot this work for me.. at first I it didn't work but then I tried again and again and it did work thanks
donkeykong1 said:
If it's in bootloader mode it should be fine. In order to run the .exe file your phone must be in bootloader mode. You managed togo into bootloader, so there should be no problem. If that .exe doesn't solve your issue, than it's safe to say it's a hardware issue
Click to expand...
Click to collapse
Hey thanks a lot this work for me.. at first I it didn't work but then I tried again and again and it did work thanks
keronmat said:
Hey thanks a lot this work for me.. at first I it didn't work but then I tried again and again and it did work thanks
Click to expand...
Click to collapse
Glad to hear that