In my prev. post i was still struggling to find the detials of my phone. I have managed that but now i cannot find the right upgrade for WWE.
I decided to download the latest T-Mobile GER version and installed it. This works well i think. Would it now be ok to Download the T-Mobile version from T-Mobile UK (ie WWE version)? Naturally i would have to edit it before installing.
Please let me know soon! I need my MDA for work!!
Thanks
xummy111 said:
In my prev. post i was still struggling to find the detials of my phone. I have managed that but now i cannot find the right upgrade for WWE.
I decided to download the latest T-Mobile GER version and installed it. This works well i think. Would it now be ok to Download the T-Mobile version from T-Mobile UK (ie WWE version)? Naturally i would have to edit it before installing.
Please let me know soon! I need my MDA for work!!
Thanks
Click to expand...
Click to collapse
OK, you need to update your MDA3 to UK spec..? Assuming you're on the T-Mobile Network, you need to follow these steps..
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
More so, as you're going to get the Country Code Error (as the MDA3 thinks it's German as opposed to WWE) then you'll need to pay particular attention to the statements at the bottom of the page.. I have pasted them for you..
Wiki said:
However, if you are installing a rom on a device other than that which it is meant for, you will get a Device ID error, so follow these steps:
First Method (Quick/Easy) (TYPE II)
Download update to desktop
Unrar or unzip all files in exe or rar into a new folder
Open the folder with the extracted files
Download this file: MaUpgradeUt_noID.ZIP
Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
Run this new exe file instead of BaUpgradeUt.exe to update your rom
If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
Click to expand...
Click to collapse
Remember, you need to be sure you know what you're doing.. Be sure you read everything on Wiki (Link in Signature) and ask yourself "Am I sure I know all the information before I press the "Update" Botton..?
Finally, you can then update your Radio (if desired) to the latest 1.15 Spec from the 1.13 seen in this ROM.. But, one step at a time, eh..? :lol:
Let us know how you get on..
Cheers!
Thanks for the info MrPhilly,
Just to clarify matters, i am not on the T-mobile network but on the Go Mobile network in Malta.
Ill try following your insructions and let you know!
Cheers!!
MrPhilly,
Thanks very much!! It worked!! Ill see how i get along without further updates for now. As you said.....one step at a time!!
xummy111 said:
MrPhilly,
Thanks very much!! It worked!! Ill see how i get along without further updates for now. As you said.....one step at a time!!
Click to expand...
Click to collapse
Excellent - Glad to hear it worked..
Don't forget to update your settings from your Airtime supplier for the MMS, etc etc..
Have you tried to 1.15 Radio Stack Update..? What you could have done there was to replace the 1.13 Radio file with the 1.15 File and update everything at once.. However, like you say, one step at a time..
Im going to try updating the radio stack now so fingers crossed! thanks again
Related
I've just uploaded to a recently release WWE 135 upgrade from the TelecomMobile Harrier.
It's at:
ftp://xda:[email protected]/BlueAngel/Harrier H20A2/
I'm about to install it, but feel free to scrounge anything useful from it.
Update:
Old ROM:
CE 1.29.00
Ext ROM 1.29.118
Radio HA01_136
New ROM:
CE 1.35.00
Ext ROM 1.35.117
Radio HA01_141
Later'ish
Craig
does the old passwords works with this rom or it requires new. pls kindly specify.
thanks
jeet
Why don't you try it?
For CraigHumphrey this is a same operator upgrade thus he does not need tofix it but run the ship.exe
Craig
I have cooked your NZTelecom Harrier 1.29.118 WWE Ext Rom, you might want to look at it.
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_129118
I have renamed the file to stay with the current format and posted it back on the ftp site.
I have added it the Available Ext Roms page on wiki
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Available_Ext_Roms
I have added the Harrier web update page to Available Upgrades in Wiki
I Have added the above update to Available Upgrades on wiki.
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Would you please post the Windows version and build Number reported by your device.
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
And post your answer.
Thanks
the old passwords dont work with the new pls any new passwords for this rom. it doesnt accepts the old passwords.
thanks
jeet
Hmm.. I had already replied to this, but it seems to have gotten lost, so here it is again
MDAIIIUser said:
Craig
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Click to expand...
Click to collapse
Done
MDAIIIUser said:
Would you please post the Windows version and build Number reported by your device.
Click to expand...
Click to collapse
Windows Mobile 2003 Second Edition
Version 4.21.1088 (Build 14132)
MDAIIIUser said:
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
Click to expand...
Click to collapse
None of those files exist.
Reminds me, I need to get a new WiFi card (the SanDisk 256MB + WiFi was unsupported).
Later'ish
Craig
Cooked the Ext Rom
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Cooked131
Ran the
NZTelecom Harrier 1.35.117 WWE ERK_1.3x_002
Through the kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_135117
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
mjb said:
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
Click to expand...
Click to collapse
Bluetooth for WIndows CE
BT-PPC/PE Version 1.0.0 Build 3500.
Under the Advanced button, all components have the same version as above (1.0.0.3500).
Later'ish
Craig
The file is corrupt
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Re: The file is corrupt
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
I downloaded it from here:
http://www.telecom.co.nz/content/0,3900,202143-203139,00.html
Then I had to do a couple of modifications to get it to flash using the magician patched flasher.
However, although it worked correctly with the Sprint EV-DO PRL for voice calls, the data connection was hosed.
It has some sort of special Kiwi customization in it . The #777 connection ends up with a password, even if I try to set it up from scratch (without running anything from extrom!). I remove the password and save the changes and then it comes back... it's obviously embedded in the HA01_141 radio ROM, and thus prevents my Sprint 6600 from connecting to #777.
The good news is that the Telstra and Verizon HA01_140 Radio_ roms do work for voice and data (although roaming isn't working).
Dan
Re: The file is corrupt
CraigHumphrey said:
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
Click to expand...
Click to collapse
The one mentioned at the top of this thread on the xda-developers ftp site. The one Dan mentioned works just fine. Someone with write capabilities should replace the one on the xda-developers ftp site...
Ehud
done!
Downloaded of link
Uploaded to ftp
corrected link in wiki
why is the rom directory empty?
Guys, I know this isn't room for asking.... but, please help me with my Sprint 6600 Harrier.
I just upgrade the new ROM (WM6.1) to my PDA. But this is my stupidity, i installed the ROM that use for GSM device, while my device is CDMA.
How to rolled back to WM2003 or higher for may PDA. Pleade guys help me.... I've desperate for this... (
Thanks for your kindnes...
You cannot upgrade the Sprint or Verizon 6600 model to WM5 or WM6 or higher. No one has yet to be able to do it. I've tried many times. You need to flash your device back with a Sprint PPC6600 ROM. The GSM ROMs are not compatible with your GSM device.
You should be able to depress the reset button with your stylus while pushing in the power and top button on left side all at the same time (a three handed job). This will put you in Serial mode (you'll see "Serial") faintly on a blanked out screen. Then you'll hook up your phone via usb cable to your computer. Then the "Serial" will change to "USB". Then you'll click on the ROM and flash it back to your Sprint PPC ROM.
There are some hacks you can do with your Sprint PPC 6600 which greatly improve its performance. There's some great Stereo Bluetooth drivers and lots of other stuff. You can unlock the extended ROM and customize the device quite nicely. You can even modify your device to work on Sprints EVDO Rev 0 network. You'll have to search this website and the Wiki to figure it all out.
@ Rambo6: Thanks for your respon.
But, I have no WM2003 ROM to flash it back. Or i can do hack my device with stereo bluetooth and unlock the extrom for flash it back?
You need to flash back to an original ROM. You need to find a ROM for an HTC Harrier (Audiovox/Verizon xv6600 or Sprint PPC6600). UT Starcom used to have these ROMs on their website. Last time I looked they were not there. I have one of these on a harddrive somewhere.
Do some web searches and you can probably find it somewhere.
I have a Siemens SX66 Cingular branded PPC. I downloaded the latest Official ROM Update but get the Wrong Country ID error. I found out that this was due my phone being an AT&T varient even though the phone says Cingular. So I wanted to know is anyone has the original ROM update that came out before the Siemens-1.33.10-Full_Update and if so could provide it to me thank you in advance. I need to put an offical rom back on my phone so I can send it back to cingular so they can send me a replacement phone.
Go to the SX66 Standardization Project to get the most recent ROMs for the SX66; they have both Cingular & ATT versions.
I went there but it's not an official version number which cingular will check for.
hakushox said:
I went there but it's not an official version number which cingular will check for.
Click to expand...
Click to collapse
Try following the instructions here:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors
You will need to run the upgrade a second time for it to install, the first time clears the previous contents, the second time the upgrade should run.
That wont work already tried that. Thankz for the resond though. BTW how do you like that new wizard OS on your sx66?
hakushox said:
That wont work already tried that. Thankz for the resond though. BTW how do you like that new wizard OS on your sx66?
Click to expand...
Click to collapse
Did you edit the .conf file as outlined in step 4? This worked for me. You may also try the MaUpgradeUt_noID route as well.
I prefer WM 2005 over 2003 I'm willing to work with the warts and try to advance the ball
Ya it gets rid of that error but then i get a error in the checksum
hakushox said:
Ya it gets rid of that error but then i get a error in the checksum
Click to expand...
Click to collapse
go back and make sure you have edited the editfix.bat file correctly, there is a set of three lines to recalculate the checksum and update it for each of the nba files (xda3nbftool -c -u ?????.nba).
hakushox,
The only way to get back to an officially supported ROM on the AT&T variant of the SX66 is with the MaUpgradeUt_noID. Now, I have not tried this, but here is what you'd need to do. Download the official Siemens update for the 1.33.10 System, and launch it. Once the first screen screen appears, open the Windows File Explorer, and search for nk.nbf. The one you are looking for will exist in a temp directory, and will exist with ms_.nbf, and radio_.nbf. Copy these files to a easy to find directory as these are the files you'll need to do the downgrade with. Cancel the offcial upgrade tool. Now, download the MaUpgradeUt_noID tools from this site, and extract it to a directory on your computer. Copy the .nbf files into that directory. Now, place your phone into boot loader mode, and place it in the cradle. Wait a few minutes for the OS to detect the "new" sync device. Finally launch the MaUpgradeUt_noID tool, and step through the screens. Once completed, it will place System 1.33.10, Radio 1.06.02, and Extended 1.33.110 ROMs on your device.
This works because the MaUpgradeUt_noID tool does check the ROM ids, and will let you flash any IDed rom onto your phone. As you can imagine, it is a rather dangerous tool if you don't have a good idea what you are doing, which is why I have tried to get it away from the Standardization project.
-Chris
Worked like a charm much thanks
Excellent!
-Chris
I tried uploading the original SX66 Cingular rom to the FTP but for some reason its not responding, if some one wants it email me and I will send it.
SysCrasher13 -
I am interested in downloading the factory Siemens SX66 firmware, after upgrading the firmware my SD slot no longer recognizes SD Memory... very strange.
Please let me know where to download the factory firmware.
Note: I have (2) SD PNY cards that work fine in my PPC4100, however, my SX66 doesn't recognize either card and wondering if this maybe a compatibility issue. I'm going to swap the 512MB with a SANdisk tomorrow to see if this rectifies the problem. Can anyone confirm SD compatibility issues with the SX66 --- is there a SD Memory quick reference chart available for the SX66?
Mike
Let me know if anybody has any ideas before I send it in for repairs...
Thanks - Mike
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??
I've been trying some of the links to downloads and some don't work and the one that I did find worked and downloaded didn't upgrade my phone.
btw, i have a cingular 8125 that I cid/sim unlocked following the directions on one of the stickies here. I went as far as downgrading to 1.01 but now that I have to upgrade to the 2.26 I can't find something that works.
Can someone direct me to the right place.
your help is appreciated.
is your device a g3 or G4??????
Very important!!! Use Wizard service tool to find out first.
search here:
ftp://ftp.xda-developers.com/Wizard
did you also try IPL/SPL 3xx?? that might work just fine. also the radio I am using seems to work just fine too (don't remember where it is located anymore though)
Thanks for responding SVI!!
I have a g3
I tried the link in this guide http://forum.xda-developers.com/showthread.php?t=285435 but the link says that its a .rar file but when I download it it downloads as a efw file.
don't know if there is another link somewhere for the 3.8 rom upgrade.
Indira said:
Thanks for responding SVI!!
I have a g3
I tried the link in this guide http://forum.xda-developers.com/showthread.php?t=285435 but the link says that its a .rar file but when I download it it downloads as a efw file.
don't know if there is another link somewhere for the 3.8 rom upgrade.
Click to expand...
Click to collapse
did you try the rapidshare or the badongo link??
because the rapidshare has an exe extension for 226, and a rar extension for 308. I am downloading the 226exe rightnow from here:
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe
I tried that too and it still downloads as a efw file.
Indira said:
I tried that too and it still downloads as a efw file.
Click to expand...
Click to collapse
perhaps that is a problem with your pc. I don't know that extenson. In about 4 minutes I will let you know how it downloaded for me.
wow. I never thought it might be on my end...lol ok. thanks for helping me.
btw, i did try a cooked download from a link and I was able to download it fine but when i tried to flash it it didn't work. I mean it goes through all the steps but it just doesn't upgrade the phone.
Yes, I just finished downloading and it is an EXE.
Try using a different browser if you have one.
As far as your upgrading problem:
You have to run lockwiz twice. one for SIM one for CID each time you have to close lockwiz, and reset the phone.
don't be afraid to think outside of the box while reading direactions. analize what is what and why.
Happy flashing. (use the search button and the wiki frequently)
I was using mozilla but now I'm trying IE to see if I can download. If not I'll try from another computer tomorrow. I'm tired, my eyes hurt.....this is a lot of work.....thanks to all you developers out there!!
I just found this link and the rom is working good I just installed it and installed WM6 no prob so far..I was looking for some time and finally found this link...http://rapidshare.com/files/6521294/RUU_TMobile_US_226102_22610105_022511_WWE_Ship.exe
when yours downloaded did it do it as an .efw file. That's what happens to me. I'm trying on my mom's computer now and its doing the same thing.
Hi
I've try different build of Android the last week and I always get some error when I do some messaging. Half of the message I receive are in chinese instead of English or French.
I have try
Scoot_CyanogenMod_7_alpha_RLS1_All_Language
myn-WarmDonut-04-24-2010-240x320-110
Incubus26Jc's Super FroYo RLS16 All Languages
I have done some reading in the forum but didn't find the answer about this.
Please help.
Thanks
Le_MaiTre
change radio firmware.
What do you call radio firmware ??
got othe windows section and search radio...
What is the latest version I should have ??? Some threat are old and I can't figure out what is the latest version ...
Thanks
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
the files in http://it029000.massey.ac.nz/vogue/files/?C=M;O=D are outdated
Ok do you know where I can find the file that are the most up to date ???
Le_Maitre said:
Ok do you know where I can find the file that are the most up to date ???
Click to expand...
Click to collapse
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
theonew said:
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
Click to expand...
Click to collapse
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
theonew said:
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
Click to expand...
Click to collapse
I have forgot to say that my installation is on NAND so I can't use haret.
-Arturo- said:
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Click to expand...
Click to collapse
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.Can someone help me ??
Click to expand...
Click to collapse
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Le_Maitre said:
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
Click to expand...
Click to collapse
theonew said:
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Click to expand...
Click to collapse
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Le_Maitre said:
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Click to expand...
Click to collapse
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you were using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
theonew said:
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you wre using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
Click to expand...
Click to collapse
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Le_Maitre said:
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Click to expand...
Click to collapse
When you were using it, what was your radio version? If it was the latest, then it should have been 3.42.50. I read that for "Bell" users like you, the radio 3.42.50 is recommended for this installation.
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Click to expand...
Click to collapse
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
-Arturo- said:
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
Click to expand...
Click to collapse
I've read the whole post but I don't understand the 3rd way. If I click on the Bell rom with radio 3.42.50 it bring me to the HTC site and there nothing to download.
I've try to download the All Above Radios zipped. It gave me 3 files in a zip. I rename the file 3.42.50 in RUU_signed.nbh and put it in the folder of the ROMUtilityUpdate. Maybe is there I do something wrong ...
Did I miss something ???